|
| 1 | Labour for boring tube well of required dia by water jet system through any type of soil strata including hire & labour charges for boring pipes, scaffolding, tools & plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc & fitting and fixing the same complete including bucket washing and other incidental works in this connection. The Tube Well should have a maximum 50 mm gap in between the outside of the tubewell pipe and the bore.a) For the depth upto 150 m for 40 mm dia tubewell with top enlargement of 100 mm dia. i) 80 mm dia boring etc. top enlargement. |
| 2 | Labour for boring tube well of required dia by water jet system through any type of soil strata including hire & labour charges for boring pipes, scaffolding, tools & plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc & fitting and fixing the same complete including bucket washing and other incidental works in this connection. The Tube Well should have a maximum 50 mm gap in between the outside of the tubewell pipe and the bore.a) For the depth upto 150 m for 40 mm dia tubewell with top enlargement of 100 mm dia. ii) 40 mm dia boring. |
| 3 | Supply of high density Polythene Strainers of approved make ... conforming to IS specification |
| 4 | Supplying, fitting and fixing 6mm 2 core aluminium wire submersible pump |
| 5 | Packing the annular space between the out side of T well pipe and bore with pia size washed gravel of approved quality having size 2-3mm including cost of all materials |
| 6 | Supply of PVC rigid pipes conforming to ASTMD & threaded to match with GI pipes as per IS 1239(P-1)i) 80 mm dia |
| 7 | Supply of PVC rigid pipes conforming to ASTMD & threaded to match with GI pipes as per IS 1239(P-1)ii) 80 mm dia |
| 8 | Supply of PVC rigid pipes conforming to ASTMD & threaded to match with GI pipes as per IS 1239(P-1)iii) 32 mm dia |
| 9 | Supply fitting fixing 1HP submersible pump with panel board approved brand ( Kirloskar /crompton Graves/ KSB) |
| 10 | Supplying, fitting and fixing PVC pipes of approved makeof medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories,pecials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew,educing socket, reducing tee, short piece etc. fitted with holder bats lamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as quired, jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) i) 20 mm |
| 11 | Supplying, fitting and fixing PVC pipes of approved makeof medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories,pecials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew,educing socket, reducing tee, short piece etc. fitted with holder bats lamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as quired, jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) i) 25 mm |
| 12 | Polythene Bib Cock / Stop Cock (HD) with metal inlet (EMCO /ATLAS or equivalent)15 mm |
| 13 | Supplying, fitting and fixing steel cutter piece upto 450 mm long with sockets |
| 14 | a) Supply fitting fixing 80mm x 40mm dia Reducing Socket |
| 15 | Supplying, fitting and fixing G.I. cap at top |
| 16 | 12 Washing and developing tube well with air compressor pump and engine for 8 (eight) hours continuous pumping per day with necessary arrangements for testing the yield in gallons per hour with \"V\" notch including hire and labour charges for all tools and plants and scaffolding as required. |
| 17 | Vertical iron treatment plant dia 1.00 ft x height 5.00 ft with charge media and fine gravel with all pipe fitting fixing and 5.00 no value used ….. As per direction of E.I.C. |
| 18 | Oxidization chamber dia 1.00 ft x height 1.5 ft. with MNO2 media used and fitting & fixed all complete as pert direction |
| 19 | chlorine chamber 8.00galone with fitting & fixing all complete as per direction |
| 20 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoil within a lead of 75 m as directed. The item includes necess-ary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. (P.W.D schedule page No. 02 & item No.2a) |
| 21 | Earth work in filling in foundation trenches or plinth with good earth in layer not exceeding 150 mm. including watering and ramming etc. layer by Layer complete.Earth obtained from Excavation of foundation. |
| 22 | Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water ramming complete, including the cost of supply of sand (Payment to be made on measurements of finished quantity).page-316, item no-4 |
| 23 | Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with powdered earth or local sand. |
| 24 | Ordinary Cement Concrete(mix 6 :3 :1) with graded stone chips (20 mm. nominal size) excluding shuttering and reinforcement, if any, in ground floor, as per IS codes. [P.W.D Schedule page no. 39, item no.7(b)].(i) Pakur Variety Stone. |
| 25 | Ordinary Cement Concrete(mix 3:1.5:1) with graded stone chips (20 mm. nominal size) excluding shuttering and reinforcement, if any, in ground floor, as per IS codes. [P.W.D Schedule page no. 39, item no.7(a)].(i) Rajmahal Variety Stone. |
| 26 | Reinforcement for reinforced concrete work in the all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods, initial strightening and removal of loose rust (if necessary), cutting requisite length, hooking and binding to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) For works in foundation, basement and upto roof of ground floor /upto 4 m. (i) Tor steel. |
| 27 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood plank of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works.[P.W.D Schedule page no.64, item no.12]. |
| 28 | Brick work with 1st class bricks in cement mortar (6:1) in foundation & plinth |
| 29 | 125mm thk. Brick work with 1st class bricks in cement mortar (4:1). In Superstructure, Ground Floor. |
| 30 | Artificial stone in floor, dado, Stair case etc. with cement concrete ( 4:2:1) with stone chips, laid in panels as directed with topping made with ordinary or white cement ( as necessary ) and marble dust in proportion (2:1) including smooth finishing and rounding off corners and including application of cement slurry before floring works using cement @ 1.75 kg. per sqm. all complete including all materials and labour. 3 mm thick topping ( high polishing grinding on this item is not permitted with ordinary cement).In ground Floor.35 mm thick. |
| 31 | Plaster (to wall, floor, ceiling etc.) with sand and cement morterincluding rounding off or chamfering corner as directed and raking out joints or roughening of concrete surface, including throating, nosing and drip course where necessary( 6:1)Building Schedule 2014, Page no:-151Item No:-2 |
| 32 | Neat cement punning about 1.5 mm thick in wall, dado, window sills floors, drains etc.[P.W.D Schedule page no.324, item no 8]. |
| 33 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992(A) (i) Single Socketed 3 Meter Length |
| 34 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixedwith colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by syntheticadhesive & grout materials etc. With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m.i)try & wall |
| 35 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixedwith colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by syntheticadhesive & grout materials etc. With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m.ii) flor |
| 36 | 1 Digging earth in any soil including mixed soil but excluding moorum, laterite sand stone or any other hard stone including spreading or stacking the spoils within a lead of 75 metres as directed bailing out water upto 1 metre depth, shoring etc., when and if required and back filling with fine sand (including cost of sand) on completion of steining works. A) R.C.C. Ring Welli) 1.2 metre diameter of digging for 0.9 metre internal diameter of well ring. |
| 37 | R.C.C. well ring made with cement concrete 1:1.5:3 with stone chips and 0.80% reinforcement (including the cost of shuttering and reinforcement) cast at site fitted and fixed in position after proper curing true to plumb in the well including jointing with cement mortar 1:2 complete as per direction. a) 65 mm thick and 0.9 metre internal dia. |
| 38 | Supplying, fitting & fixing multilayer pvc water storage tank |
| 39 | Electrification charges |
| 40 | Supply fitting & fixing display board |
| 41 | Material Testing |
| 42 | Add for GST@18% |
| 43 | Add, cess @1.00 % |
| 44 | Add contengincy |
