Tender For The Work Of Routine And Emergency Line Maintenance Work At Different Places In Area Of Subdivision-Buxipur Under Electricity Urban Distribution Division-Sri Gorakhnath, Gorakhpur(Under O&M Plan) - Loading, Unloading And Safe Carriage Of Followi, Gorakhpur-Uttar Pradesh

Tender For The Work Of Routine And Emergency Line Maintenance Work At Different Places In Area Of Subdivision-Buxipur Under Electricity Urban Distribution Division-Sri Gorakhnath, Gorakhpur(Under O&M Plan) - Loading, unloading and safe carriage of following materials from Store Centre, Gorakhpur to JE dump Store and JE dump Store to work site with proper stacking :- 2 PCC pole 8.5 meter long 3 STP pole 11/9 meter long 4 ACSR Dog Conductor 5 ACSR Weasel Conductor 6 Aerial Bunch Cable 7 Disc insulator with fitting 8 Pin insulator with fitting 9 Cable Jointing Kit for 33 KV Line 10 Cable Jointing Kit for 11 KV Line 11 33 KV XLPE Cable 12 11 KV XLPE Cable 13 33 KV Straight through 14 11 KV Straight through 15 Other Line & S/S materials 16 The excavation of foundation pit of size 750mmX450mm and having depth of 1/6th of the full length of the pole. Fabrication & erection of Pole with fixing of necessary clamps & accessories as per required. All required materials such as Holding clamp/STP/LT clamp, F-Bracket, LT shacle insulator, Nuts & Bolts off size etc will be provided by the contractor.Grouting of Pole in cc 1:4:8 (Cement, sand & 40 mm brick ballast), Grouting will be done in the block ofsize 450x450 mm x depth upto ground level and backfilling of pits with mud completely and leveling etc (Material provided by Contractor).In case of ST Pole making Plinth around Pole height 300 mm above ground level with top 100 mm is kept tapered so that no rainwater gets accumulated on the top. All work will be done as per RESPO norms & relevent IS Specification. 17 PCC pole 8.5 meter long 18 STP pole 11 meter long 19 STP pole 9 meter long 20 Laying, stringing, sagging, binding and jumpering of conductor for LT/11 KV/33KV Line with providing and fixing of LT Clamps/other clamps, Shackle insulator and nuts&bolts off size by the contractor as per required. 21 ACSR Dog/Weasel Conductor 22 Aerial Bunch Cable 23 Dismantling and again stringing, sagging, binding and jumpering of old existing conductor for LT/11 KV/33KV Line after erection of pole, Providing and fixing of LT Clamps/other clamps, Shackle insulator and nuts&bolts off size by the contractor as per site requirement. 24 ACSR Dog/Weasel Conductor 25 Aerial Bunch Cable 26 Replacement of broken/damaged following material/fitting of 33 KV/11 KV Line complete in all respect (Material will be provided by Department) 27 33 KV Cable Jointing Kit 28 11 KV Cable Jointing Kit 29 11 KV Pin insulator with fitting 30 11 KV Disc insulator with fitting 31 Dismantling of following Line materials and safe loading, unloading and carraige of dismantled material from work site to departmental store 32 STP pole 11/9 meter long 33 ACSR Dog Conductor 34 ACSR Weasel Conductor 35 Arial Bunch Cable 36 Other Line & S/S materials 37 To Locate the fault by fault locator and removed the slab, plinth out cable by heavy machinary. Locate & repair of damage part, duct & closed the duct from slab. 38 11 KV XLPE Cable 39 33 KV XLPE Cable 40 Replacement of damaged UG Cable & straight through of 33KV/11KV & LT UG Cables after locating fault through Fault Locator Machine.Work includes digging and pulling out damaged cable & again relaying of cables (Material will be provided by Contractor) 41 Replacement of damaged LT XLPE Cable 3.5X70 sq mmstraight through 42 Replacement of damaged LT XLPE Cable 3.5X150 sq mmstraight through 43 Replacement of damaged LT XLPE Cable 3.5X240 sq mmstraight through 44 Replacement of damaged LT XLPE Cable 3.5X400 sq mmstraight through 45 Replacement of damaged 33 KV XLPE Cable 3X300 sq mmstraight through 46 Replacement of damaged 11 KV XLPE Cable 3X70 sq mmstraight through 47 Replacement of damaged 11 KV XLPE Cable 3X120 sq mmstraight through 48 Replacement of damaged 11 KV XLPE Cable 3X185 sq mmstraight through 49 Replacement & Maintenance of damaged 33KV/11KV & LT UG Cable. Work includes digging and pulling out damaged cable & again relaying of cables. (Material will be provided by Contractor) 50 Replacement of damaged LT XLPE Cable 3.5X70 sq mm 51 Replacement of damaged LT XLPE Cable 3.5X150 sq mm 52 Replacement of damaged LT XLPE Cable 3.5X240 sq mm 53 Replacement of damaged LT XLPE Cable 3.5X400 sq mm 54 Replacement & Maintenance of damaged 33KV/11KV & LT UG Cable. Work includes digging and pulling out damaged cable & again relaying of cables. (Material will be provided by Contractor) 55 LT Shackle Insulator 56 Holding clamp 57 STP Clamps 58 PCC Clamps 59 F Bracket 60 LT Stud suitable for 250KVA/400 KVA T/F 61 Repairing of damage/Rusted Steel Tubular Pole by diggingof pit around pole of size 1.0 mtr.X 1.0 mtr.X1.0 mtr. is to be done for proper position and then cleaning of rust and descaling with the help of hard wire brush & chisel and then Putting 3 Nos. 1 mtr. long Angle of size 50x50x6 mm,properly welding on 3 circle with pole. After completing of above work Grouting and Plinthing 300 mm Above level with cement concrete and sand and bricks ballast. After that Painting of ST Pole by double coating Aluminium & Red oxide paint. (All material, labour and T&P will be provided by the Contractor) 62 Lopping & Chopping of tree branches and disposal of the same at suitable place for clearance of HT/LT line

INR 1180 /-

Refer document