|
| 1 | Supply and Installation of Decorative steel pole is made out of mild steel galvanized two profile bottom profile 1000mm x125mmx4.00 mm and upper ribbed profile 2500mmx81mmx3.5mm with cast iron embelishment E8 . the pole has a service window atbottom section with heavy duty four way connector and a MCB mild steel base plate 300x210 mm with four nos mounting holes is fixed with welded with bottom section pole is primer coated and polyurethane painted.Decorative pole shall be installed at desired location including foundation of the pole by making cement concrete foundation of 1:2:3( 1 cement: 3 course sand : 6 graded stone aggregate 40mm nominal size) with the help of anchor bolts and 38mm G.I sleeve as required. make: phillips, bajaj, twinkle & equivalent reputated make as per direction of E/ic (PSR Begam Hazrat Mahal Park) |
| 2 | S/F of ornamental type luminaire 40-45 watt LED post top fitting make of aluminium 534 mm long housing duly powder coated/PU painted with PC/PMMA clear/frosted diffuser with sturdy triple arm MCPCB having high umen LED\"s are mounted on aluminium heat sinks. make: phillips, bajaj, twinkle & equivalent reputated make as per direction of E/ic(PSR Begam Hazrat Mahal Park) |
| 3 | Supply & Fixing of of 9Mtr Long LuxMax-Steel Pole with Single Arm Decorative Ornamental Brackets and Suitable size foundation. Pole are made out of Galvanised Mild Steel Tubes with Cast Aluminium Embellishments. The poles are primer coated and painted with polyurethane paint. Poles are suitable for Sngle side Post Top/Drop down Luminaires. The Poles ahs a service window (Junction Box) at the bottom comprising four way 25 Amp connector terminal and a MCB Poles can be mounted with four numbers Anchor bolts as per foundation. Proper Completion of work as per direction of E/Ic. (As per Twinkle Price List) |
| 4 | Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 170 to 200 Watt. Confirming to IP 66 protection complete in all respect. As per PWD schedule 2018SI No.1455 CAT AAA |
| 5 | Supply and fixing of IP 65 10W LED garden light bollard make Crompton, bajaj, prima, Havells Etc. |
| 6 | Supplyandlayingof aluminiumconductorPVCinsulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. (SI No 501/2018) |
| 7 | 16 sq. mm 4 core |
| 8 | 10 sqmm 2 core |
| 9 | Supply and fixing of plain or pin type copper tin plated cable socket ( Lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. (SI No 504) |
| 10 | 16 sq. mm |
| 11 | Suplly and Fixing of DWC HDPE Pipe along with all acessories Like socket, band, coupling etc. confirmin to IS 14903 Part-ii complete with fixing and cutting jointing etc. (63 mm OD and ID 51 mm nominal) DSR/2022/(E/M) Item No-14.16.1) |
| 12 | Supply and fixing 40 A SPN capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. (PWD SI No 807 C ii) |
| 13 | Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50 mm inner Dia 25 mm, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25mm x 3mm G.I. strip, upto switch board (from apron to switch board, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing.Make: As approved in U.P. P.W.D., & C.P.R.I. Certified. (PWD SI No 725 B) |
| 14 | S/B of Earth rod 20 mm dia 2.5 mt long including GI wire 7/16 SWG to connected earth rod and earth clamp on pole, 3 mtr long steel conduit to carry earth wire along the jpole complite as per approved of E/Ic. (PSR) |
| 15 | S/B Supply of Feeder Pillar Box, with Aluminium Busbar-4 Strip enclosure CRC & Street powder coated outdoor type aluminium busbar 20 x 4.4 strip, MCB DP 32 m Amp-4 nos 3 pin socket 32 Amp-1 no enclosure size 300 X 350 x 200 mm(PSR) |
| 16 | Supply and wiring of Submain with two number2.5sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia. heavy guage rigid steel conduit on surface, with one number 14 SWG copper earth continuity wire etc,complete in all respect. SI No 1301 (B) |
| 17 | Wiring point for light with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit pipe on surface, complete with 14 SWG copper earthcontinuitywire,GP Box ,pianotype switchand ceiling rose/angle/ batten holder on3mm. thickphenolic laminated backelite sheet etc. complete in all respect, as directed .SI No 121 (B) |
| 18 | Supply and fixing ofLED Tube Light batten fittingsuitable for up to 1 X 22 watt LED tube light on surface complete in all respect. .SI No 1413(A) CAT-AAA |
| 19 | S&F of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve SI No 1002 CAT-A |
| 20 | AMC |
| 21 | 1st Year is Defective Liability Period. |
| 22 | Operation and Maintanance of Part-A 2nd Year (2.5 % on Part-A) |
| 23 | Operation and Maintanance of Part-A 3rd Year (3 % on Part-A) |
