Tender For Mgps Work In Construction Of Ccb (Critical Care Block) At Barmer - 1 Sitc Of Oxygen Outlets (Imported) As Per Htm-2022/02-01 Of Ukinfpa99c Of Usa As Per Enclosed Technical Specifications - (Imported) (European Ce With 4 Digit Notafied Body No, barmer-Rajasthan

Tender For Mgps Work In Construction Of Ccb (Critical Care Block) At Barmer - 1 SITC of Oxygen Outlets (imported) as per HTM-2022/02-01 of UKINFPA99C of USA as per enclosed technical specifications - (Imported) (European CE with 4 digit notafied body no / UL Listed 2 SITC of Oxygen probes (imported) as per HTM-2022/02-01 of UKINFPA99C of USA as per enclosed technical specifications - (Imported) (European CE with 4 digit notafied body no / UL Listed 3 SITC of BPC (back pressure compensated) flow meter with humidifer made of nickel plated body , double jacketed with flow gradations marked on it . Desired flow will be setteled through rotary knob . Flow range should be between 0 to 15 1pm & work should be executed as per direction of engineer in charge . 4 MEDICAL NITROUS OXIDE SYSTEM 5 SITC of Nitrous Oxide emergency system - Emergency manifold system comprise of bank of 1+1 cylinders (Bulk cylinder of D type) capacity manifold high pressure copper pipe of size 1/2ID x14 swg (approx. 2.0320 mm) & high pressure fitting made of high tensile strength brass be used to connect the cylinders to the header assemblies with 2 nos non return valves & 2 nos high pressure flexible tail pipe is made of copper pipe of 1/3x16 swg (approx. 1.6256 mm) the manifold is hydraulically tested at 225kg/cm2 pressure it is also degreased and is to be offered duly wrapped in a polythene bag. One High pressure Imported and approved make Double gauge regulator with manual pressure setting option and showing cylinder and line pressure make CE Approved/CE certifiedNote : Providing of Cylinders is in the scope of Hospital / End Client. 6 SITC of N20 Outlets (imported) as per HTM-2022/02-01 of UKINFPA99C of USA as per enclosed technical specifications - (Imported) European CE with 4 digit notafied body no / UL Listed 7 SITC of N20 probes (imported) as per HTM-2022/02-01 of UKINFPA99C of USA as per enclosed technical specifications - (Imported) European CE with 4 digit notafied body no / UL Listed 8 MEDICAL COMPRESSED AIR SYSTEM 9 SITC of Air-4 Bar Outlets as per HTM-2022/02-01 of UKINFPA99C of USA as per enclosed technical specifications - (Imported) (European CE with 4 digit notafied body no / UL Listed 10 SITC of Air-4 Bar probes, as per HTM-2022/02-01 of UKINFPA99C of USA as per enclosed technical specifications - (Imported) (European CE with 4 digit notafied body no / UL Listed 11 SITC of Air-7 Bar Outlets , as per HTM-2022102-01 of UKINFPA99C of USA as per enclosed technical specifications - (Imported) (European CE with 4 digit notafied body no / UL Listed 12 SITC of Air-7 Bar probes, as per HTM-2022102-01 of UKINFPA99C of USA as per enclosed technical specifications - (Imported) (European CE with 4 digit notafied body no / UL Listed 13 MEDICAL VACCUM CENTRAL SYSTEM 14 SITC of Vacuum Outlets , as per (imported)HTM-2022102-01ofUKINFPA99C of USA as per enclosed technical specifications - uropean CE with 4 digit notafied body no / UL Listed 15 SITC of Vacuum probes, as per (imported) HTM-2022102-01ofUKINFPA99C of USA as per enclosed technical specifications - European CE with 4 digit notafied body no / UL Listed 16 SITC of suction unit (Suction Controller and Collection Jar) with posibility to configure required capacity capacity collection Jar and should meets the requirements as per BSEN ISO 100793:2009. The unit must designed to operate with the vaccum line of MGPS. The collection Jar must accumpained with Vaccum regulator suitable for 0-14.7 psig with flow rate 0-55 Lmp (min) for operating temperature - 18°C to 50°C with ON/OFF facility. The collection Jar should be transparent, made of high quality polycarbonate that can be autoclaved at 121°C for 20 minutes for reuse and provided with auto stop to avoid over spill and contamination of the suction source when the jar collection reached optimized level. The complete unit supplied with filter to protect the source and pipe line from bacterial contamination. 17 600 m1 Capacity collection Jar 18 Supply, Installation, testing & commissioning of TheatreVacuum Unit (2 jar nos capacity 2000 Ml) ( Imported) European CE with 4 digit notafied body no 19 SITC of MGPS of medically grade as per BSEN-13348 with third party certification from Lloyds/TUV, degreased (ie free from oil, grease and particulate matters) seamless copper pipe confirming to ASTM B88 and all copper joining done by brazing with AWSA5.8, classification BCuP-5 or BS 1845 following procedure in accordance with ASTM B828 after purging with nitrogen. All pipe cutting shall be carried out with a radial pipe cutter and copper pipe fittings shall comply with B4 alloy designation. Adequate support shall be provided while laying pipeline testing shall be done at 17 bar and after testing pipe shall be painted with two coat of enamel paint as per colour codification as per ISO 7396-Part-I 2016. 20 SITC of Valve box made of CRCA sheet duly powder coated with transparent window which is installed in the MGPS for oxygen and vaccum line and should comply with ENIS05211:2001 complete with ball type valves and gauses as required for oxygen compressed air and vaccum line (three gas) 21 For Three gas 22 For Four gas 23 SITC of microprocessor based auto alarm system (digital type) suitable for medical gas service provided with audible and visual alarm for MGPS Zoning. It should monitors the current status of oxygen /compressed air pressure in distribution pipeline of central medical supply system and trigger the alarm to alert. The system should comply BSEN ISO:7396-1:2007 24 For Three Gas Services 25 For Four Gas Services 26 SITC of non lubricated ball type GM Isolation Valve with adapter & PTFE Seat having quarter turn handle opening of following sizes suitable for flow capacity 1500 LPM at 4.7 bar with maximum allowable pressure of 30 bar and suitable for working temperature ranging - 20°C to 130°C.Valve should be CE approved/ CE certified. 27 For 12 MM OD pipe 28 For 15 MM OD pipe 29 For 22 MM OD pipe 30 For 28 MM OD pipe 31 SITC of Bed Head Panel of 1200 -1500 MM long made out from high strength extruded aluminium with powder coating with 4 nos 6/16 Amp switch socket and provision forfour Nos gas outlet point work should be executed as per directions of engineer in charge and of CE certified makes. 32 P&F of Bed Panel accessories like Monitor Tray, Utility Basket, Vacuum Slider, Infusion Pump Pole with IV hooks, with proper nut bolts and screw and with proper finishing & work should be executed as per directions of engineer in charge of CE certified/ CE Approved . 33 Monitor Tray 34 Utility Basket 35 Vacuum Slider 36 Infusion Pump Pole 37 Sub: Operation Theater 02 Nos 38 SITC of Twin Plate X-ray viewing Screen designed to provide a high level of control luminance without flicker. Size:- 1000x700x95 Deep, indigenous, complete set as per enclosed tender technical specifications. (Indian) 39 SITC of Double Arm pendant with 1000mm+800mm long horizontal arms with both horizontal and vertical movement , imported, as per CE Certified/ UL listed, complete set as per enclosed tender technical specifications. (Imported)

INR 1180 /-

INR 68 Lakhs /-