Procurement Of Gate Valve Flanged - 2 Items , Gate Valve, Cs, Flanged, Size: 3 Inch X 600# Trim:5 Specifications: Body&Bonnet:Astm A216 Gr. Wcb Wedge:A217-Ca15+St6(To Be Stellited) Seat Ring:A216 Gr.Wcb+St6(Tobe Stelited) Trim: 5, Back Seat: A276 - 410(H), Stem: A479 - 410 - 2, Stem Nut: A439 - D2, Gland Flange: A105 / A216 - Wcb, Gasket: Spwd, Ss316 With Graphite Filler, Gland Bush: A276 - 410, Gland Packing: Graphite Moulded Rings With Inconel Braided Top And Bottom Rings Gland Bolt: A307 - B, Stud: A193 - B7, Nut: A194 - 2H, Hand Wheel: Sg Iron / Steel, Hand Wheel Nut: Steel Mfrs And Material Test Certificates Are Required Along With Supply Note : Ksb/Jc/L&T Valves Only , Gate Valve, Flanged, Cast Carbon Steel ,, Materials Of Construction:, Body: Astm A216 Gr. Wcb, Body Seat Ring : Astm A105 + Hf With, Stellite, Wedge : Astm A 216 Gr.Wcb + 13% Cr.Steel, Stem: Astm A 182 Gr.F6a, Gasket : Astm A 308, Bonnet : Astm A 216 Gr.Wcb, Stud : Astm A193 Gr.B7, Stud Nut : Astm A 194 Gr.B7, Back Seat Bush : 13% Cr.Steel, Packing: Graphite With Braided End Rings, Gland : Steel, Gland Flange:Astm A105/Astm A216 Gr.Wcb, Eye Bolt : Cr.Mo Steel, Eye Bolt Nut : Astm A194 Gr.2H, Groove Pin : Steel, Yoke Sleeve : Astm A439 Type D2, Grease Fitting : Steel, Retainer Nut/Handwheel/Handwheel Nut, All Steel/Ductile Iron/Malleable Iron, Name Plate: Ss304, Size: 10 300# Note: Standards:, Api 600/Api 598 - Ansi B 16.5, Ansi, B16.34 And Ansi B 16.10, Mfrs T/C And Material T/C Is Required, Along With Supply., Make:L&T/Ksb/Jc/Bdk/Sterling Makes Only.
