Annual Repair Maintenance Of Nehra To Bhadrnu Road Km. 0/00 To 2/570 (Sh Providing And Laying G Iii And Repair Of Pot Holes On Nehra Bhadrnu Road Km. 0/00 To 2/570)
Tender Value
7.63 Lakhs
Estimated cost
Bid Submission
06 Jun 2025
0 days left
EMD
15300
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
karsog → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Annual Repair Maintenance of Nehra To Bhadrnu Road Km. 0/00 To 2/570 (Sh Providing And Laying G Iii And Repair Of Pot Holes On Nehra Bhadrnu Road Km. 0/00 To 2/570)
BOQ
| Sl. No. | Item Description |
| 1 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with threewheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405 or as per direction of Engineer-in-Charge within all leads, lifts and other incidentals including carriage of materials. |
| 2 | Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm ( zero point seven zero to one point zero Kilogram per Squre Meter) using mechanical means as per Technical Specification Clause 502 or as per direction of Engineer-in-Charge within all leads, lifts and other incidentals including carriage of materials. |
| 3 | Providing and applying tack coat with Bitumen emulsion (RS-1)using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm( zero point two five to zero point three zero Kilogram per Squre Meter) on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503 or as per direction of Engineer-in-Charge within all leads, lifts and other incidentals including carriage of materials. |
| 4 | Providing, laying and rollingg of close-graded Mix Seal Surfacing surfacing material of 20 mm thickness composed of 13.2 mm to 0.9 mm (Thirteen point two millimeter to zero point nine millimeter)(Type-B) or 13.2 mm @ 0.338 kg/per ten square meter (Thirtheen Millimeter at the rate zero point three three eight Kilogram per Ten Square Meter) aggregates using penetration grade bitumen @ ie. Binders content @ 23.75 kg/10 sqm (at the rate of twenty three point seven five Kilogram per Ten Square Meter) or 5.11% (five point one one percent)by weight and minium density of MSS should be 2.10 gm/cc(two point one zero gram per cubic centimeter) to reqiured line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with three wheel 8-10 kN static roller and finishing to reqiured level and grades as per technical specificaiton clause-509 or as per direction of Engineer-in-Charge within all leads, lifts and other incidentals including carriage of materials. |
AI Tender Summary
Tender Timeline
May 30, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedJun 06, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 09, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender