Upgradation, Renovation, Furnishing, Supply Of Materials And Other Works At Rajbhawan, Ranchi (Jharkhand)-Renovation and Upgradation work for the first floor in the Honble Governors Residence Part at Raj Bhawan, Ranchi 1 Providing 300 mm x12 mm Teak wood engraved design wooden beading in eleven feet wall height in 45 degrees with arrangement of led HD light in between wall and beading fixing of beading in help of 12 mm triangular shape plywood mould. Finishing of Designer beading is PU finish This cost including all hardware and labour cost which is require for this work. Mtr. 0.00 2 Providing 300 mm x12 mm Teak wood engraved design wooden beading in eleven feet wall height in 45 degrees with arrangement of led HD light in between wall and beading fixing of beading in help of 12 mm triangular shape plywood mould. Finishing of Designer beading is PU finish This cost including all hardware and labour cost which is require for this work. Mtr. 0.00 3 Supplying and laying of DDécor/Sabyasachi/Other Similar kind of Wallpaper make European/korian imported quality wall paper including all materials such as wall paper ,Cost of Primer adhesive materials, labour and equipment taxes all complete job as per building specification and direction of E/I. Sqm 0.00 4 Providing and fixing full height storage units with luggage rack below of 600 mm deep made in 38 mm thick plywood edge finish and finished in 1.5 mm Royal Touch laminate HD Series. The internal shelves & drawers shall be made in 19 mm thick plywood finished in laminate of approved shade with matching PVC edge lipping as per the detailed drawing. All the exposed external and internal plywood surfaces shall also be finished with laminate of approved shade with 2mm thick rigid imported PVC edge lipping as per the detailed drawings. This also includes necessary hardware like sliding channels, handles, hinges, tower bolts/ball catches, locks etc. as per the manufacturer’s specification adhering to the design intent drawings. This also includes 75 mm high laminate finished skirting as per the detailed drawing. (Make of Laminate and Plywood (710 Marine Grade) Green/Century/Archid or equivalent as per direction of engineer in Charge) Sqm 0.00 5 Providing and fixing at site 450mm deep Book shelved Cupboard strictly as per the given design & drawing to be made up of 38 mm with shelves of 25.0mm ply. The rear partition is to be covered with 25 mm thick ply. The cupboard shall have open racks, the open shelves are to be finished with approved shade of 1.5 mm thick Royal Touch laminate HD Series on all the sides, All the exposed edges to have 6mm thick teak wood beadings, to be finished with approved shade of PU polish, lower storage unit is finished with Veneer with Pu Finish. Provision of Led Strip light in book shelf. The cost shall include all materials, labour, all accessories, such as handles, catchers, Led strip Lights. The measurements shall be given for only the front portion of the cupboard (Make of Laminate and Plywood (710 Marine Grade) Green/Century/Archid or equivalent as per direction of engineer in Charge) Sqm 0.00 6 Providing and fixing at site 450mm deep Book shelved Cupboard strictly as per the given design & drawing to be made up of 38 mm with shelves of 25.0mm ply. The rear partition is to be covered with 25 mm thick ply. The cupboard shall have open racks, the open shelves are to be finished with approved shade of Ipe wood veneer texture with PU Polish on all the sides, lower storage unit is finished with Veneer with Pu Finish. The cost shall include all materials, labour, all accessories, such as handles, catchers, The measurements shall be given for only the front portion of the cupboard (Make of Veneer and Plywood (710 Marine Grade) Green/Century/Archid or equivalent as per direction of engineer in Charge) Sqm 0.00 7 Providing and fixing all height wall panelling of 19 mm thick water proof Century Marine ply IS:710, ISI Mark, Termites proof. over 2x1 aluminium pipe, 1.5mm laminated sheet all complete including all taxes and royalty all complete as per building specification and direction E/I (Make of Laminate, Plywood and Veneer (710 Marine Grade) Green/Century/Archid or equivalent as per direction of engineer in Charge) Sqm 0.00 8 Providing and fixing all height wall panelling of 19 mm thick water proof Century Marine ply IS:710, ISI Mark, Termites proof. over 2x1 aluminium pipe, approved shade of Ipe wood veneer texture with PU Polish as per building specification and direction E/I (Make of Laminate, Plywood and Veneer (710 Marine Grade) Green/Century/Archid or equivalent as per direction of engineer in Charge) Sqm 0.00 9 Providing and fixing Showcase per the given design & drawing to be made up of 38 mm with shelves of 25.0mm ply. The rear partition is to be covered with 25 mm thick ply. The cupboard shall have open racks, the open shelves are to be finished with approved shade of Ipe wood veneer texture with PU Polish on all the sides, lower storage unit is finished with Veneer with Pu Finish Provision of Led Strip light & down light in shelf. The cost shall include all materials, labour, all accessories, such as handles, catchers, Led strip Lights and other types of down light in different watt. The measurements shall be given for only the front portion of the cupboard (Make of Laminate and Plywood (710 Marine Grade) Green/Century/Archid or equivalent as per direction of engineer in Charge) Sqm 0.00 10 Providing and fixing 600mm wide quartz top running counter with 600mm deep X 750mm deep below storage made in 19mm thick plywood frame work as per the detailed drawings The counter top shall have 20mm thick Quartz Stone and of approved shade. The counter shall have below storage unit with intermediate adjustable shelves and shutters made in 19mm thick plywood necessary ply backing, finished of approved shade. The counter to have granite splash band over fixed with cement mortar and the Cement paste with edge detail as per the detailed drawing. The storage unit shall have in combination of open shelves & closed storage unit with intermediate shelves & shutters made in 19mm thick plywood necessary ply backing, finished in 1.5 mm laminate of approved shade. (Make of Laminate and Plywood (710 Marine Grade) Green/Century/Archid or equivalent as per direction of engineer in Charge) Sqm 0.00 11 Providing and fixing at site 450mm deep open storage unit strictly as per the given design & drawing to be made up of19 mm with shelves of 19mm ply. The rear partition is to be covered with 19mm thick ply. The cupboard shall have open racks, the open shelves are to be 1.5 mm laminate, shelf height is 600 mm. The cost shall include all materials, labour, all accessories, such as handles, catchers, The measurements shall be given for only the front portion of the cupboard (Make of Laminate and Plywood (710 Marine Grade) Green/Century/Archid or equivalent as per direction of engineer in Charge) Sqm 0.00 12 Providing Study table of size 50 x 30 as per design on site in 19 mm thick. Marine plywood frame work with Ipe wood veneer texture with PU Polish table top &. All the inner surfaces shall be finished with Ipe wood veneer texture with PU Polish. A drawer unit is also attached shall be provided. Three no’s of drawers with Veneer shall be provided. Height of drawers shall be 100mm, 100mm and 280mm. Drawer shall consist of 19mm thick. marine Ply sides, back and 12 mm thick. marine Ply base. Facia of drawers shall be of 19mm thick. marine Ply finished in Veneer. with a wooden moulding on top/bottom edge for handle. Each drawer shall slide on a pair of telescopic drawer sliders (Approved make). Rate shall be inclusive of all necessary approved fittings like locks (Approved make) & Premium Knob for drawers and any miscellaneous hardware items (Make of Veneer and Plywood (710 Marine Grade) Green/Century/Archid or equivalent as per direction of engineer in Charge) Each 0.00 13 Providing, Making & Finishing in position Bedroom T.V Back Drop Units of varying depth 450 mm to 400 mm as per the following specification: i) Frames: Supporting system comprising of factory-made metal studs of 51mm x 35mm x 0.55mm formed out of G I sheets placed vertically at 600mm centres. Metal tracks of 51mm x 32mm x 0.55mm in size shall be fixed at floor, door and ceiling levels with staggered joints to avoid through joints. ii) Panels: Providing & fixing 19 mm thick BWR Plywood finished to the frames on one side with sheet metal screws. iii) Cladding with 4mm thick veneer: Providing & fixing cladding to the walls as per the design enclosed with 4mm thick Veneer of approved texture, grains, shade fixed to 19 mm BWR Ply, GI frames fixed to wall fascia as shown in the drawing all complete. iv) Shelves and Drawer units: Providing 75 mm to thick shelves on the Bottom level of varying depth 450 mm to 400mm. Bottom level to be provided with open draw units of size (600mm to 800mm) x (450mm to 400 mm depth) x 300mm of 3Nos of Drawer units 19 mm BWR plywood with 4mm veneer. v) Polishing: All the faces of the veneer and beadings to be finished with PU Polish Finish The rate shall be inclusive of all the materials, labour, hardware, polishing transportation, necessary required for the complete execution of the Work, all veneer should be Ipe wood veneer wit PU polish Finish (Make of Veneer and Plywood (710 Marine Grade) Green/Century/Archid or equivalent as per direction of engineer in Charge) Sqm 0.00 14 Providing and fixing console of size 6’x3’ for TV unit with open shelf made of 19 mm thick block board with shutters and shelves. Ipe wood veneer of approved make on all exposed & inner Surface surfaces including necessary hardware, locks etc. edge painting, polishing etc. complete as per drawings. all veneer should be Ipe wood veneer wit PU polish Finish (Make of Veneer and Plywood (710 Marine Grade) Green/Century/Archid or equivalent as per direction of engineer in Charge) Each 0.00 15 Supplying of 40-inch Dia round study table with teak wood base flat surface of table made by 19 mm plyboard with veneer. height of table should be 30 inches. Finish of entire table with PU Polish Each 0.00 16 Providing and fixing palmlet of Avg 200 mm width Teak wood 25 mm plank with design in bottom and engraving pattern with pu polish finish do all complete job Mtr 0.00 Renovation and Upgradation work of Billiards Room in Rajbhawan Ranchi 17 Providing and fixing all height wall panelling of 19 mm thick waterproof Century Marine ply IS:710, ISI Mark, termite-proof. Over 2x1 aluminium pipe, approved shade of American Wall nut texture with PU Polish. Making of Teak beat trimming work & Layer panel work on panelling with PU finish work as per building specification and direction of E/I. Make of laminate, plywood, and veneer (710 Marine Grade) Green/Century/Archid or equivalent as directed by the engineer in charge. Sqm 0.00 18 Providing and fixing all height wooden celling of 12 mm thick water proof Century Marine ply IS:710, ISI Mark,Termites proof with Double Layer of 4mm veneerAmerican Wall nut texture . over 2x1 aluminium pipe in height of 15 to 20 Feet . all complete as per building specification and direction E/I. (Make of Laminate, Plywood and Veneer (710 Marine Grade) Green/Century/Archid or equivalent as per direction of engineer in Charge) Sqm 0.00 19 Installing 12mm Corian finish back panelling in 12mm thick waterproof Century Marine ply IS:710, ISI Mark, termite-proof material, using all necessary solutions. The finished product will include matching bush, hardware, and glue infill as specified by the acrylic solid surface manufacturer. This project will be an interior concept presentation. Sqm 0.00 20 Installation wooden flooring in engineering wood Natural oak in 15mm thick do all complete job Sqm 0.00 21 Providing and fixing of frameless partition/taxidermy Frame work glazing consisting of 12mm clear toughened glass ( Saint gobain/ Modi make) and fixing with Dorma/Ozone make single leg spider, ceiling/bottom to glass connector, glass to glass connector, etc, all the necessary fittings upto all height including scaffolding all complete as shown in attached drawing as per the direction of Engineer-in-charge. Sqm 0.00 22 Providing PU Polish In wooden surface • Sanding: Sand the wooden surface to smoothen it.• Filling: Fill pinholes and joints with PU polish filling materials.• Staining: Apply wood stain to achieve the desired shade.• First Sealer Coat: Apply a clear PU sealer and let it dry for 4 hours.• Dry Sanding: Use an orbit sander machine to achieve a smooth surface.• Second Sealer Coat: Apply another layer of clear PU sealer and let it dry for 4 hours.• First Top Coat: Apply clear PU top coat and let it dry for 6 hours.• Final Top Coat: Apply a second coat of clear PU top coat and let it dry for 24 hours.• Buffing: Recommended for high gloss finish to achieve smooth and shiny surface. Sqm 0.00 23 suplly of Billiyard Accoseries 24 3/4 Cue Each 0.00 25 1/2 Cue Each 0.00 26 Small Cue Each 0.00 27 Rest Small Each 0.00 28 Rest Long cue Each 0.00 29 Cue Stand Each 0.00 30 Triangle Each 0.00 31 Snooker Ball Each 0.00 32 Pool Ball Each 0.00 33 Chalk Each 0.00 34 Tips Each 0.00 35 Chalk Holder Each 0.00 36 Pool Gloves Each 0.00 37 Cue Cover Large Each 0.00 38 Cue Cover Small Each 0.00 39 Rest medium Each 0.00 40 Score Board Each 0.00 41 Cue Rest Each 0.00 Making of Gym Room in ground floor corridor at Rajbhawan Ranchi 42 Providing and fixing all height wall panelling of 19 mm thick waterproof Century Marine ply IS:710, ISI Mark, termite-proof. Over 2x1 aluminium pipe, approved shade of American Wall nut texture with PU Polish. Making of Teak beat trimming work & Lsyer panel work on panelling with PU finish work as per building specification and direction of E/I. Make of laminate, plywood, and veneer (710 Marine Grade) Green/Century/Archid or equivalent as directed by the engineer in charge. Sqm 0.00 43 Providing and fixing all height wooden celling of 12 mm thick water proof Century Marine ply IS:710, ISI Mark,Termites proof with Double Layer of 4mm veneerAmerican Wall nut texture . over 2x1 aluminium pipe in height of 15 to 20 Feet . all complete as per building specification and direction E/I. (Make of Laminate, Plywood and Veneer (710 Marine Grade) Green/Century/Archid or equivalent as per direction of engineer in Charge) Sqm 0.00 44 Installation of 1.5 ton MITSUBISHI Cassete AC Four way Non Inverter Invertor Type 75 Feet Copper pipe and 78 feet Drainage pipe stand for outer unit do all compete job Each 0.00 45 Providing and fixing of Gym Rubber mat flooring tiles of size of 500 X 500 mm and thickness of 15 mm, interlocking type of Vulcanized virgin rubber of design and colour and with excellent impact bearing, tough on falling weights, protection to sub floor, sound absorbing & highly durable complete as per directions of Engineer - in -Charge. Make - Ecoflex, Bioflex, Fitflex or equivalent. Sqm 0.00 46 Installation of Faux Wood venetian Blind with all neccesory hardware and fitting as per Direction of EI Sqm 0.00 47 Installation of Zebra Blind in digitel Print do all complete job Sqm 0.00 48 Providing and fixing of frameless partition/taxidermy Frame work glazing consisting of 12mm clear toughened glass ( Saint gobain/ Modi make) and fixing with Dorma/Ozone make single leg spider, ceiling/bottom to glass connector, glass to glass connector, etc, all the necessary fittings upto all height including scaffolding all complete as shown in attached drawing as per the direction of Engineer-in-charge. Sqm 0.00 49 Providing PU Polish In wooden surface • Sanding: Sand the wooden surface to smoothen it.• Filling: Fill pinholes and joints with PU polish filling materials.• Staining: Apply wood stain to achieve the desired shade.• First Sealer Coat: Apply a clear PU sealer and let it dry for 4 hours.• Dry Sanding: Use an orbit sander machine to achieve a smooth surface.• Second Sealer Coat: Apply another layer of clear PU sealer and let it dry for 4 hours.• First Top Coat: Apply clear PU top coat and let it dry for 6 hours.• Final Top Coat: Apply a second coat of clear PU top coat and let it dry for 24 hours.• Buffing: Recommended for high gloss finish to achieve smooth and shiny surface. Sqm 0.00 50 Supply and installation of Curtain Fabric(Alchemist , Sh- 4158P) with 150 mm teak wood veneer Palmet in desire length with marvel brand chanel ,stiching it cost include all accoseries & hardwaredo all complete job M 0.00 51 Supply and Installation of Sheer Fabric (Sheer Fabric (Parco Doro , Home Studio) with marvel brand chanel ,stiching it cost include all accoseries & hardwaredo all complete job M 0.00 52 Supply and Installation of Gym Equipment 53 RUNOW Recumbent Bike - R30-V5- Features- PMS computer function: Scan,Time, Speed, Distance, Calories, Pulse,RPM,resistance level, Watts, Console program: Manual, Beginner, Advance, Sporty,Cardio(w/BT), Watt program, Recovery and Body Fat, etc, 12 programs with projector screen Size for LCD and console:Size: 275×215.5×36mmLCD:5.5(131 x 67MM) LCD, yellow + white screen,with tablet or smart phone holder Each 0.00 54 RUNOW Elliptical Crosstrainer - E30 V6- Features-PMS computer function: Scan,Time, Speed, Distance, Calories, Pulse RPM,resistance level, Watts, Console program: Manual, Beginner, Advance,Sporty,Cardio(w/BT), Watt program, Recovery and Body Fat, etc, 12 programsSize for LCD and console:Size: 275*208*70mmLCD:5.5 (131 x 67MM) LCD, yellow + white screen,with tablet or smart phone holder Each 0.00 55 DUMBBELL RACK Each 0.00 56 AF MULTI-FUNCTIONAL WEIGHT BENCH Features- Aerofit Multi-Functional Weight Bench All in One Smith Workout Squat Dip Up Sit Up Home Gym Super Pro Multi Functions Rack. Smith Structure, Sliding Support, Safety Catch Hooks, and Rubber Stopper for maximum safety. Each 0.00 57 AF 709 MUlti gym HOME GYM Features- High tensile strength steel, continuous welded, factory assembled weight frame with Dimension : 70” (L) x44” (W) x 84” (H). Fiber glass reinforced nylon pulleys with high quality bearing. Top grade 2 inches foam high density cushioning. Individual pad gives a smooth support. Rubberized weight plate make noiseless work out. Each 0.00 58 Dumble Kg 0.00 59 Weight lifting Plates Kg 0.00 60 Barbels No 0.00 Upgradation Work for PM suit at Rajbhawan Ranchi 61 Providing and fixing Bed head panelling on existing wall/partition as per the detailed drawing. The existing wall/ partition shall be cladded with 19 mm thick plywood and finished in Teak Veneer with Teak Wood Beading of Size 75 mm x 50 mm Polish with PU. To shape and size with grooves to pattern as a louver Design. All the exposed internal and external surface of the plywood surface shall be finished in Veneer with PU Polish Finish (Make of Veneer and Plywood (710 Marine Grade) Green/Century/Arched or equivalent as per direction of engineer in Charge) Sqm 0.00 62 Providing and fixing full height storage units with luggage rack below of 600 mm deep made in 38 mm thick plywood edge finish and Ipe wood veneer texture PU Finish & groove pattern as per drawing. The internal shelves & drawers shall be made in 19 mm thick plywood finished in and Ipe wood veneer texture PU Finish as per the detailed drawing. All the exposed external and internal plywood surfaces shall also be finished with and Ipe wood veneer texture with PU Polish Finish & groove pattern as per drawing. This also includes necessary Premium hardware like sliding channels, handles, hinges, tower bolts/ball catches, locks etc. as per the manufacturer’s specification adhering to the design intent drawings. (Make of Veneer and Plywood (710 Marine Grade) Green/Century/Archid or equivalent as per direction of engineer in Charge) Sqm 0.00 63 Repair work of existing Cupboard/Wardrobe Refixing of Shutter& Rack, Fixing new Veneer inner side and Exposed side, Overall finishing in PU Polish, Changing old handles Hinges and other require hardware This cost including all labour, hardware veneer accessories required for this job all veneer should be Ipe wood veneer wit PU polish Finish (Make of Veneer and Plywood (710 Marine Grade) Green/Century/Arched or equivalent as per direction of engineer in Charge) Sqm 0.00 64 Supply of Mattress of King sizebrand Sleep well spine tech air Each 0.00 65 Supply of Honeywell air PurifierReal time PM2.5 level display & indicatorCADR of up to 650 m3/hCoverage area of up to 1008 square feet / 94 square metersAdvanced 7 stage filtration with 5 air changes per hourEquipped with Pre FilterCompound Filter 1: Anti-Bacterial Filter, Silver Ion and H13 HEPA FilterCompound Filter 2: Cold Catalyst Filter and Activated Carbon FilterEquipped with Humidifier Filter to maintain ideal moisture levels in ambient airEquipped with UV LED and Ionizer to help kill harmful bacteriaWi-Fi function enabled with Honeywell Air Touch App Each 0.00 66 Supplying and laying of DDécor/Sabyasachi/Other smililer kind of Wallpaper make European/korian imported quality wall paper including all materials such as wall paper ,Cost of Primer adhesive materials, labour and equipment taxes all complete job as per building specification and direction of E/I. Sqm 0.00 67 Providing 50 mm x 20 mm Teak wood designer bead moulding for trimming purpose with Pu finish. This cost including all hardware and labour cost which is require for this work. M 0.00 68 Supply and installation of Curtain Fabric E-Toile SR No-13 with Marvel or Reputed brand track with all hardware fittings do all complete job M 0.00 69 Supply and Installation of Sheer Fabric (IVY,Sr-33) Marvel or Reputed brand track with all hardware fittings do all complete job M 0.00 Waterproofing and Repair work of main portico & Renovation work of Confrance hall (G.Floor)& small Dinning room (1st Floor) in Rajbhawan Ranchi 70 Installation of flag post in Roof of Portico specifications are, iron flag post with outer shell cover in in stainless steel complete 6 Dia , 20 feet arrangement of pully festering in roof with hilty anchoring boult, including making platform of 2 feet height 2 feet square in size arrangement do all complete job Each 0.00 71 Providing Making and installing 65 mm WPC Patti Moulding on Ceiling all complete as per building specification and direction of E/I. Rft 0.00 72 Labour for cleaning of concrete surface, dust, oil, grease including removal of existing loose paint / coating, and cement laitance by cleaning with compressed air, including all materials, labour, tools and tackles completeRepairing surface irregularities, damaged concrete in base slab, if any, with a styrene butadiene polymer, Sika Latex or equivalent modified repair mortar including a coat of bonding agent of the same with cement slurry including all material, labour, tools and tackles completeAfter drying the coated surface, Gio Textile membrane (120 micron) shell be laid, as loose laid over the Davco K10 PU Plus coating before concrete screed. The area shall be laid with a minimum 75mm avg. thick concrete screed admixed with the waterproofing compound, Sika Latex SBR, ensuring that the screed gently slopes towards the drain pipes. The concrete screed should be cast in panels of 2mx2m maintaining 10mmx10mm groove using Sika Polysulphide. 50 mm thick Concrete work for maintaining slope All top layer should be cover with Davco K10 So acryl acrylic with two coats, ready to use waterproofing slurry. Sqm 0.00 73 Installation of Solid Wood American wallnut wood PlaXnk of 18 mm thick 900mmx120mm size plank do all complete job Sqm 0.00 Servicing and Refilling work of different type FireExtigunisher and Supply of Fire Extigunisher at Raj Bhawan Ranchi 74 Servicing & Refilling of ABC Stored Pressure type Fire Extinguishers, refill with MAP Powder 06 kg Each 0.00 75 Servicing & Refilling of ABC Stored Pressure type Fire Extinguishers,refill with MAP Powder 04 Kg Each 0.00 76 Servicing & Refilling of ABC Stored Pressure type Fire Extinguishers,refill with MAP Powder 500 gram Each 0.00 77 Servicing & Refilling of Clean Agent Stored Pressure type Fire Extinguishers,refill with FK-5112 gas 02 Kg Each 0.00 78 Servicing & Refilling of Water Stored Pressure type Fire Extinguishers, 09 Ltr Each 0.00 79 Servicing & Refilling of trolley Mounted water type Fire Extinguishers,inluding replacement of CO2 gas cartridge-(500gram) 50 Ltr Each 0.00 80 Servicing & Refilling of Foam(AFFF) Stored Pressure type Fire Extinguishers, 09 Ltr Each 0.00 81 Servicing & refilling of CO2 type Fire Extinguishers 4.5 Kg Each 0.00 82 Servicing & Refilling of DCP type Fire Extinguishers refill with Sodium bicarbonate powder and Co2 Gas Cartridge 06 Kg Each 0.00 83 Providing & Installation of Fire Extinguishers Co2 type fire extinguishers ISI Marked Complete with Hose & Horn 4.5 Kg Each 0.00 Supply of Household Items & other works at Raj Bhawan Ranchi 84 Revolving boss chair Each 0.00 85 Waiting chair 3 seater SS Each 0.00 86 Bedsheet Each 0.00 86 Comforter Each 0.00 87 Gloves Each 0.00 87 Duvet Cover Each 0.00 88 Table Mat Each 0.00 88 Fridge Mat Each 0.00 89 Cushion Cover With Cushion Each 0.00 89 Flag Each 0.00 90 Runner Each 0.00 90 Cotton Pillow(Big) Each 0.00 91 Yoga Mat Each 0.00 91 Apron Each 0.00 92 Bath Towel Each 0.00 92 Hand Towel Each 0.00 93 Face Towel Each 0.00 93 Bath Stool Each 0.00 94 Bath Bucket premium Each 0.00 94 Mug premium Each 0.00 95 Dustbin Each 0.00 95 Mug Each 0.00 96 Cotton Pillow(Small) Each 0.00 96 Bedsheet Double- Trident 63023100 Each 0.00 97 Bedsheet Double- 63041910 Each 0.00 97 Handtowels 40*60 BD Tulip-63041910 Each 0.00 98 Towel 30*60- Trident- 63026090 Each 0.00 98 Laundry Bags Each 0.00 99 Hot Pot Chef- Cello Each 0.00 99 Milton SS flask with flip lid 1000 ml Each 0.00 100 Trunk Box Each 0.00 100 Umbrella - Big Each 0.00 101 Cushion Cover Each 0.00 101 Tissue Box Each 0.00 102 Table Flag Each 0.00 102 Foot Mat- 50*80 Each 0.00 103 Table Flag Stand (Polish) Each 0.00 103 Bath Stool -Plastic Each 0.00 104 India Flag - 6*4 Each 0.00 104 Indian Flag 42 * 6 Each 0.00 105 Indian flag-6*4 Each 0.00 105 Cushion H/Scape-16*16 Each 0.00 106 Cushion cover -16*16 Each 0.00 106 Table Mat Anti Slip mat Each 0.00 107 Carpet bedside -3*5 Each 0.00 107 Plastic Stool Each 0.00 108 Big Flag 4*6 Each 0.00 108 Table Flag 4*6 Each 0.00 109 Tissue Box Each 0.00 109 Induction chulla Each 0.00 110 Tea Coaster- 10 Set Each 0.00 110 Cup and Saucer with Rajbhawan logo printed Each 0.00 111 Philips Steam Iron Each 0.00 111 Ptrestige Tawa Each 0.00 112 Pan Holder Each 0.00 112 Tiffin Steel 4 bowl set Each 0.00 113 Brass Glass thali set Each 0.00 113 Washing machine 12 LTR samsung Lg or equivalent Each 0.00 114 Flag Stand -7Feet with Flag and Ashoka Emblem Each 0.00 114 Flag Stand Brass Cross Table with Flag Each 0.00 115 HP CARTIDGE TONER 110A W1112A BLACK Each 0.00 115 HP TONER CARTRIDGE BLK W1002YC Each 0.00 116 HP TONER 88AD CC388AD BLK Each 0.00 116 HP TONNER CART 507A BLK Each 0.00 117 BROTHER TONER TN-3478 Each 0.00 117 Supplying and placing of Premium Leatherette Chair, High Back/Dimension (W)710mm X (D)750mm X (H)1245mm /Colour & Colour Family Brown/ Pneumatic Height Lift Tilt Tension Control Chrome Base/Pneumatic Height Lift, Tilt Tension Control, Revolving Synchro Mult locking The product must be from a Manufacturer having ISO 9001,ISO 14001,,AIOTA ,BIFMA COMPLIANT, GREEN GUARD,SEDEX CERTIFICATE. MAKE DURIAN GODREJ AND OTHER APPROVED BARND BY EI WARRANTY 5 YEAR complete as per building specification and direction E/I Each 0.00 118 Supplying and Placing of maharaja chair of Barma Teak Wood make of size 40 x30x 30 ,chair have engrave carving with Ashok stambh in centre cushion with superior foam & Premium clothing .all exposed faces finish with PU finish Each 0.00 119 Supplying and Placing of dinning chair of Teak Wood make of size 40 x24x 24 ,chair all exposed faces finish with PU finish with clothing seat and back Each 0.00 120 Installation of 4k 43 inch LED Smart Tv Sony Bravia Series Each 0.00 121 Supplying and placing of Berma teak wood side table of size 18 x18x18 size and glass top of 12 mm glass all exposed faces finish with PU finish Each 0.00 119 Sofa for PS Resident 0.00 122 Sofa cloth Bellissima Sofa ClothShade 4278 M 0.00 120 Cushion Cloth with making Bellissima Sofa ClothShade 4278 M 0.00 123 Sofa making 7 Seater Each 0.00 121 supply of Titen wall clock piece 0.00 124 Repair work of old sofa work 3+2+1+1 122 Brand BellissingCarving Sofa ClothShade 4278 M 0.00 125 Brand BellissingMarkineShade 8500 M 0.00 123 Brand SleepwallFoam .5Shade 20/105 No 0.00 126 Making 3+2+1+1 No 0.00 124 Repair work of old sofa work 3+1+1 127 Brand BellissingCarving Sofa ClothShade 1908 M 0.00 125 Brand BellissingMarkineShade 8500 M 0.00 128 Brand SleepwallFoam .5Shade 285 No 0.00 126 Material No 0.00 129 Making 3+1+1 No 0.00 127 Repair work of old sofa work 3+1+1 130 Brand BellissingCarving Sofa ClothShade 71370 M 0.00 128 Making 3+1+1 No 0.00 131 Repair work of old sofa work 2+2 129 Brand BellissingNormal Sofa ClothShade 37842 M 0.00 132 Material No 0.00 130 Making 2+2 No 0.00 133 Repair work of old sofa work 2+2 131 Brand BellissingNormal Sofa ClothShade 37843 M 0.00 134 Making 2+2 No 0.00 132 Repair work of old Chair,Can Chair ,dinning Chair seat and back 135 Brand BellissingChair ClothShade 37843 M 0.00 133 Making Seat & Back No 0.00 136 LeatherShade 13579 M 0.00 134 Making No 0.00 137 Brand BellissingWooden Chair ClothShade 71341 M 0.00 135 Brand SleepwallFoam 72362SLP No 0.00 138 Making Seat & Back No 0.00 136 Brand BellissingChair ClothShade 35841 M 0.00 139 Brand SleepwallFoam 21223SLP No 0.00 137 Material 1+1 No 0.00 140 Brand BellissingCan Sofa ClothShade 71356 M 0.00 138 Brand SleepwallFoam 21223SLP No 0.00 141 Material 1+1 No 0.00 139 Brand BellissingCan Sofa ClothShade 13574 M 0.00 142 Brand SleepwallFoam 21223SLP No 0.00 140 Material No 0.00 143 Making 1+1 No 0.00 141 Brand BellissingCan Sofa ClothShade 13575 M 0.00 144 Brand SleepwallFoam 72632SLP No 0.00 142 Making 3+3 No 0.00
