Repair And Maintenance Of Water Supply Equipments And Allied Works Under Ge Dehu Road; Disconnecting /dismantling /taking outthe defective burnt out VT pump set (Moter/Pump) from jack well andtransporting to shop including loading/unloading etc complete and reffixing again after necessary repair work of capacity 30/60 HP Vertical motor. The repair includes followingsa) Dismantling/taking out strip opening /inspection complete of the bowl assembly, column pipe assembly, discharge head assembly etc and cleaing/ servicing overhauling all the servicable spare parts and M &L for painting to exposed surfaces of the column pipe assembly, bowl assembly and discharge head assembly etc with two coats of approved quality anticorrosive water resistant type black paint all as directed including labours for replacement of worn out / unservicable parts as required and directed.b) Reassembling the complete pump set and re-erection and re-installation at its original position as directedc) Testing and commissioning complete all as directed by Engr-in-Charge.Note:1) The rate quoted by the tenderer includes all cost of necessary nut bots washers and alike if not included in Sch A2) All new parts required will be measured and paid separately as supply only items.3) The rate quoted by the tenderer also includes cost for taking out pump from the well 20m depth from GL and again lowering the same in its original level and alignment complete.4)The size of wiring to be incorporated in the work shall be as per existing one hence contractor is requested to visit the site and to get acquanted with site conditions complete.5)T&P , Transport etc incl in quated rate . 6) Location :Keniya Pump House and A-I Pump House 2 Supply for repairsuction case bearing for 30 HP VTPump set of Capacity 30 HP.Make:Joyti 3 Supply for repair suction case bearing for 60 HP VTPump set of Capacity 30 HP.Make:Joyti 4 Supply for repairImpeller seal ring of Capacity 30 HP.Make:Joyti 5 Supply for repairImpeller seal ring of Capacity 60 HP.Make:Joyti 6 Supply for repair Bearing holder assembly of Capacity 60 HP.Make:Joyti 7 Supply for repair Line shaft Bearing (Throdan type) of Capacity 30 HP.Make:Joyti 8 Supply for repair Stuffing box bush of Capacity 30 HP.Make:Joyti 9 Supply for repair Stuffing box bush of Capacity 60 HP.Make:Joyti 10 Supply for repair Latern Ring of Capacity 30/60 HP.Make:Joyti 11 Supply for repair Water deflector of Capacity 30/60 HP.Make:Joyti 12 Supply for repair Head shaft coupling of Capacity 30 HP.Make:Joyti 13 Supply for repair Head shaft coupling of Capacity 60 HP.Make:Joyti 14 Supply for repair Impeller made out of MS with impeller key 30/60 HP complete all as directed 15 Supply for repair Strainer Assembly of Capacity 30/60 HP.Make:Joyti 16 Supply for repair Impeller shaft of Capacity 30 HP.Make:Joyti 17 Supply for repair Impeller shaft of Capacity 60 HP.Make:Joyti 18 Supply for repair Impeller collect assemly of Capacity 30/60 HP.Make:Joyti 19 Supply for repair NDE Bearing No 6307/C3 suitable for 30/60 HP Make SKF OR equivalent 20 Supply for repair electric connection box of ebonite materialswith Insulators, lugs , protection cover suitable for 30/60 HP. 21 Disconnections suction and discharge line connection,Diconnection coupling motor of centrifugal pump of discharge capacity 120 LPS with head 100 mtr, motor capacity150 HP . Lifting and removingpump form its existing foundation. Dismantling the pump carefully checking, segregating serviceable,repairable and unserviceable parts, cleaning the serviceable parts thoroughly by approved method (Pats likeshaft, key,Impellior,bearing upper casing etc)including replacement of unserviceable parts as required (The same will be measured and paid separately in respectable items mention bellow). Reassembling the pump including painting with two coats of synthetic enamel paint after necessary surface preparation , marking of number (SM, MES or srl No) installing to its existing foundation, commissioning, connecting up and testing complete as directed . Pump Make=Kirloskar.Model No DSM 150/46. Location: Keniya Pump House. Note:(i) Spare parts for repair/replace will measured in respective items as per site required 22 Repair the Pump shaft with metaling, grinding,polishing,balancing with true shape Suitable for pump set Model no DSM 150/46 ,Kirloskar 23 SupplyCoupling KeySuitable for pump set Model no DSM 150/46 ,Kirloskar 24 SupplyKey for ImpellerSSuitable for pump set Model no DSM 150/46 ,Kirloskar 25 SupplyKey for Sleeve Nut Suitable for pump set Model no DSM 150/46 ,Kirloskar 26 SupplyBolt for upper and lower half casing Suitable for pump set Model no DSM 150/46 ,Kirloskar 27 SupplyTaper pin with washers and nuts for lower and upper half casingCoupling Key suitable for DSM 150/46 ,Kirloskar 28 Supply Draing plug for casing suitablefor 15 HP pump . Suitable for DSM 150/46 ,Kirloskar 29 SupplyPaper packing between lower and upper casing KeySuitable for pump set Model no DSM 150/46 30 SupplyO ring for shast sleevSuitable for pump set suitable for Model no DSM 150/46 ,Kirloskar 31 Supply Wear Ring suitable for Pump setSuitable for pump set Model no DSM 150/46 ,Kirloskar 32 Supply Shoulder Ring in CISuitable for pump set Model no DSM 150/46 150 HP 33 Supply Interstage RingSuitable for pump set Model no DSM 150/46 ,Kirloskar 34 Supply Lantern Ring Suitable for pump set Model no DSM 150/46 ,Kirloskar 35 Supply DE ball bearingSuitable for pump set Model no DSM 150/46 ,Kirloskar 36 Supply DE Bearing CoverSuitable for pump set Model no DSM 150/46 ,Kirloskar 37 Supply Cartridge for bearing, NDE Suitable for pump set Model no DSM 150/46 ,Kirloskar 38 Supply Bearing cover, NDE Suitable for pump set Model no DSM 150/46 ,Kirloskar 39 Supply Bearing Cap Suitable for pump set Model no DSM 150/46 ,Kirloskar 40 Supply Bearing nut,Suitable for pump set Model no DSM 150/46 ,Kirloskar 41 Supply Shaft sleeve, DE/NDE,Suitable for pump set Model no DSM 150/46 ,Kirloskar 42 Supply Water Deflector DE/NDE,Suitable for pump set Model no DSM 150/46 ,Kirloskar 43 Supply Air vent,Suitable for pump set Model no DSM 150/46 ,Kirloskar 44 Supply Hex screw for bearing cover,Suitable for pump set Model no DSM 150/46 ,Kirloskar 45 Supply Cylindrical pin,Suitable for pump set Model no DSM 150/46 ,Kirloskar 46 Supply Round Lock nut ,Suitable for pump set Model no DSM 150/46 ,Kirloskar 47 Supply Gland Packing,Suitable for pump set Model no DSM 150/46 ,Kirloskar 48 Supply Vent Valve,Suitable for pump set Model no DSM 150/46 ,Kirloskar 49 Supply Flexible ST Hose Pipe,Suitable for pump set Model no DSM 150/46 ,Kirloskar 50 Supply Gland stuffing box suitable for nut and bolts Suitable for pump set Model no DSM 150/46 ,Kirloskar 51 Disconnections suction and discharge line connection,Diconnection coupling motor of centrifugal pump of discharge capacity 100 LPS with head 100 mtr, motor capacity120 HP . Lifting and removingpump form its existing foundation. Dismantling the pump carefully checking, segregating serviceable,repairable and unserviceable parts, cleaning the serviceable parts thoroughly by approved method (Pats likeshaft, key,Impellior,bearing upper casing etc)including replacement of unserviceable parts as required (The same will be measured and paid separately in respectable items mention bellow). Reassembling the pump including painting with two coats of synthetic enamel paint after necessary surface preparation , marking of number (SM, MES or srl No) installing to its existing foundation, commissioning, connecting up and testing complete as directed . Pump Make=Kirloskar.Model No DSM 150/46.Note:(i) Spare parts for repair/replace will measured in respective items as per site required centrifugal pump of discharge capacity 100 LPS with head 100 mtr, motor capacity120 HPPump Make=Kirloskar.Model No RKB-100/23E35. Location: Keniya Pump House 52 Repair the Pump shaft with metaling, grinding,polishing,balancing with true shape Suitable for pump set Model no- RKB-100/23E35Make-Kirloskar. 53 SupplyCoupling KeySuitable for pump set Model no- RKB-100/23E35,Make-Kirloskar. 54 SupplyKey for ImpellerSSuitable for pump set Model no- RKB-100/23E35,Make-Kirloskar. 55 SupplyKey for Sleeve Nut Suitable for pump set Model no- RKB-100/23E35,Make-Kirloskar. 56 SupplyBolt for upper and lower half casing sSuitable for pump set.Model no- RKB-100/23E35,Make-Kirloskar. 57 SupplyTaper pin with washers and nuts for lower and upper half casingCoupling Key suitablefor Model no- RKB-100/23E35,Make-Kirloskar. 58 Supply Draing plug for casing suitablefor 15 HP pump .Model no- RKB-100/23E35,Make-Kirloskar. 59 SupplyPaper packing between lower and upper casing KeySuitable for pump setModel no- RKB-100/23E35,Make-Kirloskar. 60 SupplyO ring for shast sleevSuitable for pump set.Model no- RKB-100/23E35,Make-Kirloskar. 61 Supply Wear Ring suitable for Pump setSuitable for pump set .Model no- RKB-100/23E35,Make-Kirloskar. 62 Supply Shoulder Ring in CISuitable for pump set .Model no- RKB-100/23E35,Make-Kirloskar. 63 Supply Interstage RingSuitable for pump set. Model no- RKB-100/23E35,Make-Kirloskar. 64 Supply Lantern Ring Suitable for pump set .Model no- RKB-100/23E35,Make-Kirloskar. 65 Supply DE Bearing CoverSuitable for pump set. Model no- RKB-100/23E35,Make-Kirloskar. 66 Supply NDE BearingSuitable for pump set .Model no- RKB-100/23E35,Make-Kirloskar. 67 Supply Cartridge for bearing, NDE Suitable for pump set .Model no- RKB-100/23E35,Make-Kirloskar. 68 Supply Bearing cover, NDE Suitable for pump set. Model no- RKB-100/23E35,Make-Kirloskar. 69 Supply Bearing Cap Suitable for pump set. Model no- RKB-100/23E35,Make-Kirloskar. 70 Supply Bearing nut,Suitable for pump set. Model no- RKB-100/23E35,Make-Kirloskar. 71 Supply Shaft sleeve, DE/NDE,Suitable for pump set .Model no- RKB-100/23E35,Make-Kirloskar. 72 Supply Water Deflector DE/NDE,Suitable for pump set Model no DSM 150/46 ,Kirloskar 73 Supply Air vent,Suitable for pump set .Model no- RKB-100/23E35,Make-Kirloskar. 74 Supply Hex screw for bearing cover,Suitable for pump set.Model no- RKB-100/23E35,Make-Kirloskar. 75 Supply Cylindrical pin,Suitable for pump set .Model no- RKB-100/23E35,Make-Kirloskar. 76 Supply Round Lock nut ,Suitable for pump set .Model no- RKB-100/23E35,Make-Kirloskar. 77 Supply Gland Packing,Suitable for pump set. Model no- RKB-100/23E35,Make-Kirloskar. 78 Supply Vent Valve,Suitable for pump set Model no- RKB-100/23E35,Make-Kirloskar. 79 Supply Flexible ST Hose Pipe,Suitable for pump set Model no- RKB-100/23E35,Make-Kirloskar. 80 Supply Gland stuffing box suitable for nut and bolts Suitable for pump set Model no- RKB-100/23E35,Make-Kirloskar. 81 Disconnections suction and discharge line connection,Diconnection coupling motor of centrifugal pump of discharge capacity 130 LPS with head 105 mtr, motor capacity75 HP . Lifting and removingpump form its existing foundation. Dismantling the pump carefully checking, segregating serviceable,repairable and unserviceable parts, cleaning the serviceable parts thoroughly by approved method (Pats likeshaft, key,Impellior,bearing upper casing etc)including replacement of unserviceable parts as required (The same will be measured and paid separately in respectable items mention bellow). Reassembling the pump including painting with two coats of synthetic enamel paint after necessary surface preparation , marking of number (SM, MES or srl No) installing to its existing foundation, commissioning, connecting up and testing complete as directed . Pump Make=Kirloskar.Model No DSM 150/46.Note:(i) Spare parts for repair/replace will measured in respective items as per site required centrifugal pump of discharge capacity 130 LPS with head 105 mtr, motor capacity75 HPPump Make=GRUNDFOS.Location :- Keniya Pump House. 82 Bulk Impeller 99262569,uitable for 75 HP centrifugal Pump,Make : Grand Force. 83 Shaft 99196563,uitable for 75 HP centrifugal Pump,Make : Grand Force. 84 Kit wear part,uitable for 75 HP centrifugal Pump,Make : Grand Force. 85 Kit Bearing,uitable for 75 HP centrifugal Pump,Make : Grand Force. 86 Disconnections suction and discharge line connection,Diconnection coupling motor of centrifugal pump of discharge capacity 34 LPS with head 60/75 mtr, motor capacity 60 HP . Lifting and removingpump form its existing foundation. Dismantling the pump carefully checking, segregating serviceable,repairable and unserviceable parts, cleaning the serviceable parts thoroughly by approved method (Pats likeshaft, key,Impellior,bearing upper casing etc)including replacement of unserviceable parts as required (The same will be measured and paid separately in respectable items mention bellow). Reassembling the pump including painting with two coats of synthetic enamel paint after necessary surface preparation , marking of number (SM, MES or srl No) installing to its existing foundation, commissioning, connecting up and testing complete as directed . Pump Make=Kirloskar.Model No DSM 80/36.Note:(i) Spare parts for repair/replace will measured in respective items as per site required centrifugal pump of discharge capacity 130 LPS with head 75 mtr, motor capacity 60 HPPump Make=Kirloskar.Location :-MIDC Pump House. 87 SupplyShoulder Ring in CI suitable for PUMP set,,suitable for Model No DSM/80/36,Make: Kirloskar. 88 SupplyInterstage Ring suitable for Pump set,,suitable for Model No DSM/80/36,Make: Kirloskar. 89 Supply Lantern Ringsuitable for Pump set,,suitable for Model No DSM/80/36,Make: Kirloskar. 90 SupplyGland suitable for Pump set,,suitable for Model No DSM/80/36,Make: Kirloskar. 91 Supply DE Bearing s,suitable for Model No DSM/80/36,Make: Kirloskar. 92 Supply NDE Bearing ,suitable for Model No DSM/80/36,Make: Kirloskar. 93 Supply Deep Groove Ball bearing suitable for 60 HP,,suitable for Model No DSM/80/36,Make: Kirloskar. 94 Supply ANG Contact Ball bearing,,suitable for Model No DSM/80/36,Make: Kirloskar. 95 Supply Bearing Cover,,suitable for Model No DSM/80/36,Make: Kirloskar. 96 SupplyCover NDE,,suitable for Model No DSM/80/36,Make: Kirloskar. 97 Supply Shaft Sleeve,suitable for Model No DSM/80/36,Make: Kirloskar. 98 Supply Key for Impeller,,suitable for Model No DSM/80/36,Make: Kirloskar. 99 Supply Key for Coupling,,suitable for Model No DSM/80/36,Make: Kirloskar. 100 Supply Key for Sleeve Nut,,suitable for Model No DSM/80/36,Make: Kirloskar. 101 Supply Shaft Sleeve Nut ,,suitable for Model No DSM/80/36,Make: Kirloskar. 102 Supply Round Lock nut ,,suitable for Model No DSM/80/36,Make: Kirloskar. 103 Supply Gland Packing,,suitable for Model No DSM/80/36,Make: Kirloskar. 104 Supply Vent Valve,,suitable for Model No DSM/80/36,Make: Kirloskar. 105 Supply Set of O Ring ,,suitable for Model No DSM/80/36,Make: Kirloskar. 106 Supply Flexible ST Hose Pipe,,suitable for Model No DSM/80/36,Make: Kirloskar. 107 SupplyMs stud and including replacement of CI gland ,suitable for Model No DSM/80/36,Make: Kirloskar. 108 Supply Cooling PVC flexible of ,suitable for Model No DSM/80/36,Make: Kirloskar. 109 Disconnections suction and discharge line connection,Diconnection coupling motor of centrifugal pump of discharge capacity 36000 GPS with head 122 mtr, motor capacity 100 HP . Lifting and removingpump form its existing foundation. Dismantling the pump carefully checking, segregating serviceable,repairable and unserviceable parts, cleaning the serviceable parts thoroughly by approved method (Pats likeshaft, key,Impellior,bearing upper casing etc)including replacement of unserviceable parts as required (The same will be measured and paid separately in respectable items mention bellow). Reassembling the pump including painting with two coats of synthetic enamel paint after necessary surface preparation , marking of number (SM, MES or srl No) installing to its existing foundation, commissioning, connecting up and testing complete as directed . Pump Make=Kirloskar.Model No Model No K1225 Note:(i) Spare parts for repair/replace will measured in respective items as per site required centrifugal pump of discharge capacity 36000 GPS with head 122 mtr, motor capacity 100 HP Pump Make=Kirloskar. Location :- A-2 Pump House. 110 Supply Lantern Ringsuitable for Pump set,suitable forModel No K1225 Make : Kirloskar 111 Supply Gland suitable for Pump set,suitable forModel No K1225 Make : Kirloskar 112 Supply DE Bearing suitable forModel No K1225 Make : Kirloskar 113 Supply NDE Bearing suitable forModel No K1225 Make : Kirloskar 114 Supply Deep Groove Ball bearing suitable forModel No K1225 Make : Kirloskar 115 Supply ANG Contact Ball bearing,suitable forModel No K1225 Make : Kirloskar 116 Supply Bearing Cover,suitable forModel No K1225 Make : Kirloskar 117 Supply Bearing Cover NDE,suitable forModel No K1225 Make : Kirloskar 118 Supply Shaft Sleeve suitable forModel No K1225 Make : Kirloskar 119 Supply Key for Impeller,suitable forModel No K1225 Make : Kirloskar 120 Supply Key for Sleeve Nut,suitable forModel No K1225 Make : Kirloskar 121 Supply Shaft Sleeve Nut ,suitable forModel No K1225 Make : Kirloskar 122 Supply Round Lock nut,suitable forModel No K1225 Make : Kirloskar 123 Supply Gland Packing,suitable forModel No K1225 Make : Kirloskar 124 Supply Set of O Ring ,suitable forModel No K1225 Make : Kirloskar 125 Supply Gland stuffing box suitable for nut and bolts suitable forModel No K1225 Make : Kirloskar 126 Disconnections suction and discharge line connection,Diconnection coupling motor of centrifugal pump of discharge capacity 10000 GPS with head 26 Mtr, motor capacity 15/20 HP . Lifting and removingpump form its existing foundation. Dismantling the pump carefully checking, segregating serviceable,repairable and unserviceable parts, cleaning the serviceable parts thoroughly by approved method (Pats likeshaft, key,Impellior,bearing upper casing etc)including replacement of unserviceable parts as required (The same will be measured and paid separately in respectable items mention bellow). Reassembling the pump including painting with two coats of synthetic enamel paint after necessary surface preparation , marking of number (SM, MES or srl No) installing to its existing foundation, commissioning, connecting up and testing complete as directed .Make : Kirloskar OR EquivalentNote:(i) Spare parts for repair/replace will measured in respective items as per site required centrifugal pump of discharge capacity 10000 GPS with head 26 Mtr, motor capacity 15/20 HP Pump Make=Kirloskaror equivalent.Location :- C-1 and C-2 Pump House,COD Depot,FAD Depot. 127 DE/NDE Bearing No 6306 suitable for Make : Kirloskar OR Equivalent 128 Shaft bush for 15/20 HP Pump including removal from the pumps,Make : Kirloskar OR Equivalent 129 Shaft coupling flexible type KC 276 FOR 15/20 HP Cappacity in repair and removal from pumps Make : Kirloskar OR Equivalent 130 Star Nuts for 15/20 HP Centrifugal pump Make : Kirloskar OR Equivalent 131 Impeller wear ring Model no KDS15/20 HPMake : Kirloskar OR Equivalent 132 Bearing housing.Model no KDS 15/20 HP Make : Kirloskar OR Equivalent 133 Disconnections suction and discharge line connection,Diconnection coupling motor of centrifugal pump of discharge capacity 25LPS with head 25 Mtr, motor capacity 10 HP . Lifting and removingpump form its existing foundation. Dismantling the pump carefully checking, segregating serviceable,repairable and unserviceable parts, cleaning the serviceable parts thoroughly by approved method (Pats likeshaft, key,Impellior,bearing upper casing etc)including replacement of unserviceable parts as required (The same will be measured and paid separately in respectable items mention bellow). Reassembling the pump including painting with two coats of synthetic enamel paint after necessary surface preparation , marking of number (SM, MES or srl No) installing to its existing foundation, commissioning, connecting up and testing complete as directed .Make : Kirloskar OR EquivalentNote:(i) Spare parts for repair/replace will measured in respective items as per site required centrifugal pump of discharge capacity 25LPS with head 25 Mtr, motor capacity 10 HP Pump Make=Kirloskaror equivalent.Location :- COD Depot,FAD Depot.STP 134 Pump shaftSuitable for pump set 10 HP.Make : Kirloskar 135 DE/NDE Bearing of capacity 10 HP.Make : Kirloskar 136 Shaft bush for 10 HP Pump including removal from the pumps.Make : Kirloskar 137 Shaft coupling flexible type 10 HP Cappacity in repair and removal from pumps.Make : Kirloskar 138 Star Nuts for 10 HP Centrifugal pump Make : Kirloskar 139 Mechanical Shaft seal for 10 HP Centrifugal pump .Make : Kirloskar 140 Disconnection the electric and pum connectio and transportation to work shop for repair and back,taking out burnt winding coils from stator body cleaning of slots with soft wire brush and rewinding by using super enameled copper wire of existing size & gauge, heat and varnishing complete and M&L winding with super enamal copper wire of existing gauge including greasing, varnishing and alike testingand painting with two cote of synthetic eanamel paint,completesuitable for Squirrel cage electric motor of capacity 150 HP 3 phase 415 Volt AC supply. (make : kirlosker ) 141 All as item no 9 here in before butSquirrel cage electric motor of capacity120 HP 3 phase 415 Volt AC supply. ( make : kirlosker ) 142 All as item no 9 here in before but Squirrel cage electric motor of capacity 75/60 HP 3 phase 415 Volt AC supply. (make : kirlosker ) 143 All as item no 9 here in before but Squirrel cage electric motor of capacity 30 HP 3 phase 415 Volt AC supply. (make : kirlosker ) 144 All as item no 9 here in before but Squirrel cage electric motor of capacity 15/20 HP 3 phase 415 Volt AC supply ( make : kirlosker ) 145 All as item no 9 here in before but Squirrel cage electric motor of capacity 10 HP 3 phase 415 Volt AC supply ( make : kirlosker ) 146 All as item no 9 here in before but Squirrel cage electric motor of capacity 5 HP/3 HP 3 phase 415 Volt AC supply ( make : kirlosker ) 147 Disconnection the electric and lifting the submersible pump from river bed,welland transportation to work shop for repair and back,taking out burnt winding coils from stator body cleaning of slots with soft wire brush and rewinding by using super enameled copper wire of existing size & gauge, heat and varnishing complete and M&L winding with super enamal copper wire of existing gauge including greasing, varnishing and alike testingcompletesuitable for Submersible motor with pumpofcapacity 15 HP 3 phase 415 Volt AC supply. 148 All as item no-16 here in before but capacity of submersible pump 10 HP 149 Taking down the unserviceable Fan Bladeupto 20 HP Motor and supply fixing the same. 150 Taking down the unserviceable Fan Bladeupto 30 HP Motor and supply fixing the same. 151 Taking down the unserviceable Fan Bladeupto 60 HP Motor and supply fixing the same. 152 Taking down the unserviceable Fan Bladeupto 100-150 HP Motor and supply fixing the same. 153 S&F in repair electric connection box of ebonite materialswith Insulators, lugs , protection cover suitable for 30 HP. 154 Takingdown the unserviceable Starter from the existing panel and Supply and Fixing FASD For 15 HP Squirrel cage Induction motor Make L&TC&S, Havells or equivalen 155 Takingdown the unserviceable Starter from the existing panel and Supply and FixingCitation Fully Automatic Star delta starter with citation M Contactor and pneumatic timerssuitable for 75 HP,55KW , three phase,415 Volt,50 Hz,Overhead relay range 56.4 -90 Amps, contractor type-E contractor rating 70 Amps catno-NASACT4LENM.Make :- BCH 156 Takingdown the unserviceable Starter from the existing panel and Citation Fully Automatic Star delta starter with citation M Contactor and pneumatic timerssuitable for 120 HP,90KW , three phase,415 Volt,50 Hz,Overhead relay range 100 -150 Amps, contractor type-M-5 contractor rating 180 Amps catno-NASACT4LENM.Make :- BCH 157 Takingdown the unserviceable Citation Fully Automatic Star delta starter with citation M Contactor and pneumatic timerssuitable for 150 HP,110KW , three phase,415 Volt,50 Hz,Overhead relay range 84.6 -135 Amps, contractor type-N contractor rating 140 Amps catno-NASACT4LENM.Make :- BCH 158 Takingdown the unserviceable Starter from the existing panel and MU-G 15 DOL Star-Delta Starterfor10 HP squrrel cage induction motor Make L&TCat no CS94901, C&S, Havells or equivalent 159 Takingdown the unserviceable Starter from the existing panel and MN 16 DOL Starter for 3/ 5 HP Motor L&TCat no SS94351, C&S, Havells or equivalent 160 4 Pole Power Contactors - Type MCX 4 Pole Power Contactors [8536] l Range from 16AcontactorMake: L & T/C&S/Havells or equivalent 161 4 Pole Power Contactors - Type MCX 4 Pole Power Contactors [8536] l Range from 160AcontactorMake: L & T/C&S/Havells or equivalent 162 4 Pole Power Contactors - Type MCX 4 Pole Power Contactors [8536] l Range from 100AcontactorMake: L & T/C&S/Havells or equivalent 163 Taking out unserviceable air compressor twin lobe blower type 15 HP 1440 RPM, 3 phase 440Volt capacity 300 Cu ft/min from Pump House and carring out overhauling of air compressor with replacement of following spare parts , greasing, varnishing and alike testing complete of capacity 164 Supply for repair Bearingsuitable 15 HP Blower. 165 Supply for repair Oil Seal uitable 15 HP Blower. 166 Supply for repair Oil Packing uitable 15 HP Blower. 167 Supply for repair Gear Hub uitable 15 HP Blower. 168 Supply for repair Gear Set uitable 15 HP Blower. 169 Supply for repairRotar Set uitable 15 HP Blower. 170 Repair,Maintenance , Servicing of electrical actuator suitable for undermentioned line disconnecting electrical connection, removing the actuator from the butterfly valve,cleaning using cotton / sand paper etc., greasing for wear & tear, refixing, reconnecting & testingfor the following sizes all as directed.Location MIDC Pump House,A-II Pump House 171 80mm/100mm 172 150mm/200mm 173 250mm/300 mm 174 Maintenance /Servicing of Solenoid valve i.e. disconnecting electrical connection, dismantling, cleaning, refixing with Teflon tape, installation, reconnecting and testing as directed.Location MIDC Pump House,A-II Pump House 175 Maintenance /Servicing of Pressure Switch i.e. disconnecting electrical connection, dismantling, cleaning, refixing with Teflon tape, installation, reconnecting and testing as directed.Location MIDC Pump House,A-II Pump House. 176 Taking down the unserviceable motor operated actuated butterfly valve of size 150/200/300 mm dia from the existing scada line. 177 Supply and fixingtesting and Commissioning of Regulating Motor Actuated Butterfly valve with the following specifications including all accessories as requireda) Valve size: 150 mm dia.b) Designed line pressure: 4 kg/sq cm.c) Operating Angle: 90 degreesd) Disc Material: C.I. with nylon coatinge) Limit switches: 02 nos. for open and closef)Type: Direct on line Make: RITE TORK / HASEL HOFENER/MARSH AUTOMATION 178 Supply & fixing testing and Commissioning of Regulating Motor Actuated Butterfly valve with the following specifications including all accessories as requireda) Valve size: 200 mm dia.b) Designed line pressure: 4 kg/sq cm.c) Operating Angle: 90 degreesd) Disc Material: C.I. with nylon coatinge) Limit switches: 02 nos. for open and closef)Type: Indirect on line Make: RITE TORK / HASEL HOFENER/MARSH AUTOMATION 179 Supply & fixing testing and Commissioning of Regulating Motor Actuated Butterfly valve with the following specifications including all accessories as requireda) Valve size: 300 mm dia.b) Designed line pressure: 4 kg/sq cm.c) Operating Angle: 90 degreesd) Disc Material: C.I. with nylon coatinge) Limit switches: 02 nos. for open and closef)Type: Indirect on line Make: RITE TORK / HASEL HOFENER/MARSH AUTOMATION 180 Taking down the unserviceable level sensor and Supplyandfixingtesting andCommissioning of Ultrasonic Level sensor suitable for 5 meter depth along with digital level indicator and all necessary installation accessories.Make: SBEM/BANNER/NIVELCO/E+H 181 Taking down the unserviceableButterfly valve of size 80mm/100 mm/150mm/250 mm/300mm. 182 supply and fixing Gear control disc design double flange Butterfly valve of size 80mm PN-10 Make : AUDCO,L&T/Cair 183 supply and fixing Gear control disc design double flange Butterfly valve of size 100mm PN-10 Make : AUDCO,L&T/Cair 184 supply and fixing Gear control disc design double flange Butterfly valve of size 150mm PN-10 Make : AUDCO,L&T/Cair 185 supply and fixing Gear control disc design double flange Butterfly valve of size 200mm PN-10 Make : AUDCO,L&T/Cair 186 supply and fixing Gear control disc design double flange Butterfly valve of size 250mm PN-10 Make : AUDCO,L&T/Cair 187 supply and fixing Gear control disc design double flange Butterfly valve of size 300mm PN-10 Make : AUDCO,L&T/Cair 188 Taking down the unserviceable Solenoid valve and Supply & fixing in repairs of Solenoid valve of size 10 mm.Make : Avcon/Johnson Control 189 Taking down the unserviceable motorised valve and Supply & fixing in repairsof priming motorised valve of size 25 mm.Make : Avcon/Johnson Control/Marsh 190 Taking down the unserviceable Pressure switch and Supply & fixing in repairs of Pressure switch 0 - 10 kg/sq.cm.Make : Danfoss/Indfoss 191 Material and labour for Panel Wiring, Installation & testing PLC Programming. 192 Taking down the unserviceable Relay and Supply & fixing in repairsof Relay– 4 C/O, 24 V D.C.Make : IDEC/Leone 193 Taking down the unserviceable Relay and Supply & fixing in repairsof Relay– 4 C/O , 230 V A.C.Make : IDEC/Leone 194 Taking down the unserviceable Push Buttonand Supply & fixing in repairsof Push Button with LED Indicator-240VAC Color : Red / Green Make : Telemecanique/Schneider 195 Taking down the unserviceable LED Indictor and Supply & fixingLED Indictor-24 VDC / 230 VAC ,Color : Red,Yellow,Blue Make : Telemecanique/Schneider 196 Taking down the unserviceable Selector switch.and Supply and fix in replacement of Selector switch. Make :Telemecanique/Schneider 197 Taking down the unserviceable Contact and Supply and fix in replacementonly NO (Normaly Open) Contact - 240V A.C. 3 A all as specified.(Make : Telemecanique/Schneider 198 Taking down the unserviceable SMPS and Supply & fixing in repairsof SMPS 24 V DC 5A Make: NHP/Telemecanique 199 Taking down the unserviceable Transformer 12V and Supply & fixing in repairsof Transformer 12V Make: AIM 200 Taking down the unserviceableWater level controller 5 level and Supply & fixing in repairsof Water level controller 5 levelMake: Jagadguru Enterprises 201 Taking down the unserviceableMCB DP,6 Amp and Supply & fixing in repairsof MCB DP,6 Amp Make:Schneider/L&T/Legrand 202 Taking down the unserviceable single phase motor and suitable for actuator for80 mm/100 mm/150 mm/200 mm/250 mm/300 mm dia Butterfly valve 203 Supply & fixing in repairsof electric motor suitable for actuator for80 mm/100 mm dia Butterfly valve. Must be Compatible with existing actuator .Make: Ritetork or equivalent 204 Supply & fixing in repairsof Electric motor suitable for actuator for 150 mm/200 mm dia. Butterfly valve. Must be Compatible with existing actuator Make: Ritetork or equivalent 205 Supply & fixing in repairs of Electric motor suitable for actuator for 250mm/300 mm dia. Butterfly valve. Must be Compatible with existing actuator Make: Ritetork or equivalent 206 Taking down the unserviceable Hand wheeland Supply & fixing in repairsof Hand wheel for Actuator suitable forfor 80 mm/100 mm/150mm/200mm/250mm/300 mm Butterfly Valve. 207 Taking down the unserviceableLimit Switch and Supply & fixing in repairsof Limit Switch for Actuator suitable forfor 80 mm/100 mm/150mm/200mm/250mm/300 mm Butterfly Valve.Make: CHERRY or equivalent 208 Taking down the unserviceable Resistance / Capacitor and Supply & fixing in repairsof Resistance / Capacitor suitable for actuator for 80 mm/100 mm/150mm/200mm/250mm/300 mm butterfly valve. 209 Taking down the unserviceable Top cover for Actuator and Supply and fix in replacement of Top cover for Actuator suitable for 50 / 80 / 100 / 150/200/250/300mm dia Butterfly Valve complete all as specified. 210 Taking down the unserviceable LCD/LED display HMI Human machine and Supply & fixing of 2 line LCD/LED display HMI Human machine interference for PLC based panel.Make: Mitsubishi/schneider/Allen Brodley 211 Taking down the unserviceable GPRS communication modem and Supply & fixing in repairs / replacement of GPRS communication modemComplete as specified and directed. Make : Modem: MAESTRO HERITAGE / LEO 212 Taking down the unserviceable copper cable of any size /type complet all as directed. 213 Supply and fixing in repairs4 core 1.5 sq. mm. PVC insulated and PVC sheathed armored copper cable etc. as reqd.Make: Polycab/FSC/Havells 214 Supply and fixing in repairs6 core 1.5 sq. mm. PVC insulated and PVC sheathed armored copper cable etc. as reqd.Make: Polycab/FSC/Havells 215 AMC for Scada system for A--II and MIDC Pump house through authorised service agency of RDS.The scope of work include:-(a) Servicing/Maintenance/Repair of Mechanical & Electrical parts of Motor actuated butterfly valves. (b) Servicing/Maintenance/Repairof electrical & electronic parts & components of the Existing PLC based control panel and Existing Motorized valve. (i) Monthly checking of the operation of the entire automation system.(ii)Routine quarterly servicing of all serviceable component of the automated system.(iii) Attending to emergency calls and rectification of the fault there of.(iv) The scope of work however exclude repair/replacement to the armoured copper cable (2core x 1.5sq.mm, 4core x 1.5sq.mm, 6core x 1.5sq.mm, 5 pair x 0.5mm dia. Communication cable) (v) All other spares if require being replace shall be given by department or paid separately.(vi)The contract shall be valid for 11 months. (vii)The automated system shall be thoroughly checked every month for its smooth operation. (viii) Wifi need to be recharged for every six months it is included in this quoted rate. 216 Supply and fix in repair to panel at Alkapuri area for monitoring and control for PLC based panel of 2 nos motorised valves and 02 nos ultrasonic level sensors. The scope lof work includes necessary I/O cards, relays, relay base, indicator lamps, mounting rack, SMPS power supply, transformer and internal wiring ,lugs etc. drilling tapping work and necessary labeling as regd with Indoor type arrangement for panel and execution of work all as directed by Engineer in charge.PRICE SCHEBRLE. The upgraded PLC based Panel shall be integrated with the new SCADA system using GPRS communication Modem. 217 Supply and fix in repairs panel at MIDC Pump house area for monitoring and control for PLC based panel 03 nos. Pumps, 03 no. pressure switches, 03 nos. solenoid valves, 03 nos. priming valves, 06 nos motorised valves and 01 no. ultrasonic level sensors. The scope of work includesn ecessary I/0 cards, relays, relay base, indicator lamps, mounting rack, SMPS power supply, transformer and internal wiring ,lugs ete. drilling tapping work and necessary labeling as reqd with indoor type arrangement for panel. Execution of work all as directed by Engineer:The upgraded PLC based Panel shall be integrated with the new SCADA system using GPRS communication Modem. 218 Supply and fiX in repair to panel at A2 Pump house area for monitoring and contro for PLC based panel 05 nos. Pumps, 05 no. pressure switches, 05 nos. solenoid valves, 05 nos. priming valves, 08 nos motorised valves and 02 nos ultrasonic level,sensors The scope of work includes ncessary internal wiring, I/O cards, relays, rela,base, indicator lamps, mnounting rack, SMPS power supply, transformer and lugs,etc. drilling tapping work and necessary labeling as reqd. Executin of work as,directed by Engineer in charge.The upgraded PLC based Panel shall be integrated with the new SCADA system using GPRS communication Modem. 219 Takingdown the unserviceable Starter from the existing panel and Citation Fully Automatic Star delta starter with citation M Contactor and pneumatic timerssuitable for 100 HP,90KW , three phase,415 Volt,50 Hz,Overhead relay range 100 -150 Amps, contractor type-M-5 contractor rating 180 Amps catno-NASACT4LENM.Make :- BCH 220 Supply and fix in repair to panel at OHT of A2 Pump house area for monitoring and Control for PLC based panel 02 nos motorised valves and 01 nos ultrasonic level,sensors. The scope of work includes providing necessary internal wiring, I/0 cards,relays, relay base, indicator lamps, mounting rack, SMPS power supply, transformer,and internal wiring lugs etc. drilling tapping work and necessary labeling as reqd with Outdoor type arrangement for panel.Execution of work all as directed by Engr-in -charge The upgraded PLC based Panel shall be integrated with the new SCADA system using GPRS communication Modem.
