|
| 1 | fo|qr forj.k [k.M & tsoj ds {ks=kUrxZr 11 dsoh iks”kd eq |
| 2 | Safe Cartage of following centralised stock material from any of the Store Center of PVVNL Discom to work siteincluding Loading from Store and safe unloading at site for Item No. 3 to 16 |
| 3 | STP 11 Mtr Long |
| 4 | Top Channel 125x65 mm, 3200 mm long |
| 5 | Dropper Channel |
| 6 | G.I Supporting Base Angle |
| 7 | 11 KV Polymeric Disc insulater |
| 8 | 11 KVDiscfitting |
| 9 | Earthing Complete |
| 10 | Stay Complete |
| 11 | Weasel Conductor |
| 12 | Barbed Wire |
| 13 | 3CX120sq mm 11kv XLPE Cable (Double circuit) |
| 14 | 11 Kv O/D & I/D TerminationKit 3x120 sq mm |
| 15 | 11 KV Pin Insulator |
| 16 | Stone Pad |
| 17 | Errection of above Centralised material and Supply and errection of the below De-Centralised material for completing the works as per RESPO. |
| 18 | Supply of 140mm OD PN-4-PE-80, 6\" Dia Grade UV Stabilized HDPE Pipe.(PVVNL GTP APPROVED) |
| 19 | Fabrication and Errection of Sectional Double Pole Riser by ST Pole 11Mtr. Long for 11KV Line with proper grouting and concreting of pole and proper installation of required accessoriesas per RESPO norms with complete work in all respect. (all work in the scope of Contractor) Grouting of - In ratio of 1:4:8 in Cement, sand and Brick Ballast) in size 450mmx450mmx1800 mm and Construction of Plinth in size 450x450x300 mm of each (0.285 Cum) pole above the ground level(In ratio of 1:3:6 in Cement, sand and Brick Ballast) as per RESPO. |
| 20 | Drilling of dia 220 mm in bores for Double Curcuit by trenchless method by horizontal boring machine as per site requirement below the ground level at Kaccha/Pakka Road/Road Crossing/as per site requirement with complete work in all respect as per RESPO with Laying and interconnecting of aboveHDPE Pipe PE-80, PN-6, DN-140mm, 6\" dia by HDD trenchless method for HOSTING OF 11 KV 3x120sq.mm XLPE cable with complete work in all respect. |
| 21 | Laying, Hosting and commissiong of 11 KV 3x120sqmm XLPE Cable Double Ckt. in HDPE Pipe by HDD trenchless method with complete work in all respect. |
| 22 | Digging of pits of size 4 mtr x 4 mtr x 1.5 mtr for cable loop and making risers at double pole and re-filling of pits in proper manner with required material at kacha/pakka and hot mix road. (All Work and materialin the scope of contractor) |
| 23 | Laying of 11KV 3x120 Sq.mm XLPE Cable in the air on cable Riser Double Pole, & Loop open cut method with Bricks, sand & stone in double cirucit with complete connections in all respect. |
| 24 | Preparation, Making and Fixing of 11 KV Power Cable ends:Fixing and Making of 11 KVHeat shrinkable outdoor/indoor jointing kits suitable for 3x120sqmm XLPE Cable after duly plumbing and taping of cable, providing, fixing and crimping of proper size good quality lugs with complete connention in all respect. |
| 25 | Laying, Sagging, strenging/Jumper of ACSR Rabbit Conductor as per site requirement with complete work in all respect as per RESPO. |
| 26 | Fixing of 11KV Pin Insulator with Pin as per site requirement with complete work in all respect as per RESPO. |
| 27 | Fixing of 11KV Disc Insulator with fittings as per site requirement with complete work in all respect as per RESPO. |
| 28 | Fixing and Driving of MSearth rod of size20x2500 mm in earth andjointing through G.I. wire of 6 SWG between support and earth electrode by providing proper size of bolts and nuts for pole earthing as per RESPO. |
| 29 | Fixing of 11KV MS Top Channelas per site requirement with complete work in all respect as per RESPO. |
| 30 | Fixing of Stone Pad as per site requirement with complete work in all respect as per RESPO. |
| 31 | Fixing of MS Dropper channel as per site requirement with complete work in all respect as per RESPO. |
| 32 | Fixing of MS GI supporting Base Angle as per site requirement with complete work in all respect as per RESPO. |
| 33 | Fixing, tightening & nozzling of stay wire with stay rod with the poles including providing & fixing of Stay Insulators of 11KV and Stay Clamps AND Grouting of stay rods (20x1800)mm including all work of excavation, cement concrete in size (0.60x0.60x0.30)m in ratio 1:3:6 cement, sand, 20mm Stone grift) as per drg. Including back filling of soil and proper ramming etc. |
| 34 | Fixing of Barbed Wire at Pole or as per site requirement with complete work in all respect as per RESPO. |
| 35 | Supply & fixing of Best quality ISI Marked GI Pipe 6\" diafor suitable for3x120sqm 11KV cable with complete work in all respect as per RESPO. |
| 36 | Supply and Fixing of Best Quality MS Nut, Bolt and Washers with complete work in all respect. |
| 37 | Supply and Fixing of Danger Board with complete work in all respect. |
| 38 | Providing and Fixing of Holding Clamp for dropper channels as per site requirement. |
| 39 | Dismentaling and Removal of existing old and used Conductor from site and safe carriage of its from site to JE Store and JE Store to any Store of PVVNL Discom including loading and unloading both ends. |
| 40 | Dismentaling and Removal of existing old and used ST/PCC Pole with safely removal of pole accessories from site and safe carriage of its from site to JE Store and JE Store to Any Store Centre of PVVNL Discom including loading and unloading both ends. |
| 41 | fo|qr forj.k [k.M & xzsVj uks,Mk ds {ks=kUrxZr 11 dsoh chjeiqj nsgkr dh 11 dsoh futh uydwi vkWojgSM fo|qr ykbZu dks Hkwfexr djus ,oa 11 dsoh chjeiqj uydwi vkWojgSM ykbZu 11 dsoh ¼70 ehVj½ ,oa ,y0Vh0 ¼60 ehVj½fo|qr ykbZu dks Hkwfexr djus ,oa vU; lEcfU/kr dk;ZA |
| 42 | Safe Cartage of following centralised stock material from any of the Store Center of PVVNL Discom to work siteincluding Loading from Store and safe unloading at site for Item No. 43 to 52 |
| 43 | ST POLE 11 M LONG |
| 44 | 11 KV Droper & Top Channel 100X50X2240mm |
| 45 | A.C.S.R.Rabbit Con. For (Jumper Wires) |
| 46 | 11 KV Disc Insulator |
| 47 | 11 KV Disc Insulator fitting |
| 48 | Stay Rod Complet |
| 49 | 3 Phase Distribution Box |
| 50 | 11kv XLPE Cable 3×185 MM |
| 51 | LT XLPE Cable Al. 3.5X50 SQ MM |
| 52 | 11 Kv O/DCable Jointing Kit XLPE Cable 3×185 sq mm |
| 53 | Errection of above Centralised material and Supply and errection of the below De-Centralised material for completing the works as per RESPO. |
| 54 | Fabrication and Errection of Sectional Double Pole Riser by ST Pole 11Mtr. Long for 11KV Line with proper grouting and concreting of pole and proper installation of required accessoriesas per RESPO norms with complete work in all respect. (all work in the scope of Contractor) Grouting of - In ratio of 1:4:8 in Cement, sand and Brick Ballast) in size 450mmx450mmx1800 mm and Construction of Plinth in size 450x450x300 mm of each (0.285 Cum) pole above the ground level(In ratio of 1:3:6 in Cement, sand and Brick Ballast) as per RESPO. |
| 55 | Laying, Hosting and commissiong of 11KV 3x185sqmm XLPE CableDouble Ckt. after digging trenchas per site requirement with two parallel bores by manual methodand refilling of trench by bricks, sand and store along the length on both side ofCable in Trench, 18No. Bricks/Mtr per Cable and Stone Slab of size 450x600x50mm on top of the each Cable, Providing 150 thickness mm River sand for cushion beneath and 150mm above the cable and Back filling of excavated earth in the cable trench upto the ground level and ramming properly. including connections at both ends after providing and crimping of lugs of proper size for completion of work. |
| 56 | Laying, Hosting and commissiong of LT 3.5x50sqmm XLPE CableDouble Ckt. after digging trenchas per site requirement with two parallel bores for Double Curcuit by manual methodand refilling of trench by bricks, sand and store along the length on both side ofCable in Trench, 18No. Bricks/Mtr per Cable and Stone Slab of size 450x600x50mm on top of the each Cable, Providing 150 thickness mm River sand for cushion beneath and 150mm above the cable and Back filling of excavated earth in the cable trench upto the ground level and ramming properly. including connections at both ends after providing and crimping of lugs of proper size for completion of work. |
| 57 | Digging of pits of size 4 mtr x 4 mtr x 1.5 mtr for cable loop and making risers at double pole and re-filling of pits in proper manner with required material at kacha/pakka and hot mix road. (All Work and materialin the scope of contractor) |
| 58 | Laying of 11KV 3x120 Sq.mm XLPE Cable in the air on cable Riser Double Pole, & Loop open cut method with Bricks, sand & stone in double cirucit with complete connections in all respect. |
| 59 | Preparation, Making and Fixing of 11 KV Power Cable ends:Fixing and Making of 11 KVHeat shrinkable outdoor/indoor jointing kits suitable for 3x185sqmm XLPE Cable after duly plumbing and taping of cable, providing, fixing and crimping of proper size good quality lugs with complete connention in all respect. |
| 60 | Laying, Sagging, strenging and Jumpering of ACSR Rabbit Conductor as per site requirement with complete work in all respect as per RESPO. |
| 61 | Fixing of 11KV Disc Insulator with fittings as per site requirement with complete work in all respect as per RESPO. |
| 62 | Fixing of 11KV MS Top Channeland Dropper Channelsas per site requirement with complete work in all respect as per RESPO. |
| 63 | Fixing, tightening & nozzling of stay rod with the poles including providing & fixing of Stay Insulators of 11KV and Stay Clamps AND Grouting of stay rods (20x1800)mm including all work of excavation, cement concrete in size (0.60x0.60x0.30)m in ratio 1:3:6 cement, sand, 20mm Stone grift) as per drg. Including back filling of soil and proper ramming etc. |
| 64 | Providing and Fixing of Stay Wire GI (7/3.15mm)7/10SWG for Stay Rod and complete work in all respect as per RESPO. |
| 65 | Supply and Fixing of Best Quality MS Nut, Bolt and Washers with complete work in all respect. |
| 66 | Supply and Fixing of Holding Clamp with complete work in all respect. |
| 67 | Fixing of 3 Phase Distribution Box as per site requirement with complete connections and work inall respect. |
