Procurement Of Aluminum Door, Window, Partition, Ceiling Etc. Complete Set Incl. Fitting Fixing In Any Worksite Under The Jurisdiction Of R.D Khowai Division , Providing & Fitting Fixing Of Anodized Aluminum Framed (24 Series, 1.50Mm Thick ) Upper Part Fixed & Sliding Shutter In 2 (Two) Track Window As Approved Design Of Department With 4 Mm Thick Plain Or Coloring Glassetc And Necessary Accessories For Suitable Locking & Handlingarrangement For The Complete Job As Per Direction Of Engineer-In-Charge. , Providing & Fitting Fixing Of Anodized Aluminum Framed (24 Series,1.50 Mm Thick ) Upper Part Fixed & Sliding Shutter In 3 (Three) Track Window As Approved Design Of Department With 4 Mm Thick Plain Or Coloring Glassetc And Necessary Accessories For Suitable Locking & Handlingarrangement For The Complete Job As Per Direction Of Engineer-In-Charge. , Providing & Fitting Fixing Of Anodized Aluminum Framed Window Upper Part Fixed & Open Able Shutter In 2 (Two) Part (40 Series, 1.50 Mm Thick ) With 4 Mm Thick Plain Or Coloring Glassetc And Necessary Accessories For The Complete Job As Per Direction Of Engineer-In-Charge. , Providing & Fitting Fixing Of Anodized Aluminum Framed Window Upper Part Fixed & Open Able Shutter In 3 (Three) Part (40 Series, 1.50 Mm Thick ) With 4 Mm Thick Plain Or Coloring Glassetc And Necessary Accessories For The Complete Job As Per Direction Of Engineer-In-Charge. , Providing & Fitting Fixing Of Fixed Aluminum Framed Partition With 12 Mm Prelaminated Particle Board /4Mm Plain Or Coloring Glass Incl. Door Etc And Necessary Accessories As Required For The Complete Job As Per Direction Of Engineer-In-Charge. , Providing & Fitting Fixing Of Fixed 1, 50 Mm Thick Suitable Aluminum Framed Partition With 4 Mm Plain Or Coloring Glass Providing Opening For Door Etc And Necessary Accessories As Required For The Complete Job As Per Direction Of Engineer-In-Charge. , Providing & Fitting Fixing Of Aluminum Net In Window / Open Space With Necessary Standard Size Aluminum Frame & Accessories As Required For The Complete Job As Per Direction Of Engineer-In-Charge. , Providing & Fitting Fixing Of Aluminum Grill In Window / Open Space With Necessary Standard Size Aluminum Frame & Accessories As Required For The Complete Job As Per Direction Of Engineer-In-Charge. , Providing & Fitting Fixing Of 1.5Mm Thick Aluminum Framed (3.5”X1.75”) Door Based On Hydraulic Floor Spring, Made Of 12 Mm Pre-Laminated Board & 6Mm Thick Plain Or Coloring Glass In Top With Upper / Lowercloser And Necessary Accessories As Required For The Complete Job As Per Direction Of Engineer-In-Charge. , Providing & Fitting Fixing Of Twin Typedoor Hydraulic Floor Spring Based, Made Of 12 Mm Thick Plain Or Coloring Glass With Suitable Standard & Approved Aluminum Frame In Top And Bottom Including Necessary Accessories As Required For The Complete Job As Per Direction Of Engineer-In-Charge. , Providing & Fitting Fixing Of 1.5Mm Thick Aluminum Framed (3.5”X1.75”) Hinge Swing Door Made Of 12 Mm Pre-Laminated Board & 6Mm Thick Plain Or Coloring Glass In Top With Necessary Accessories As Required For The Complete Job As Per Direction Of Eng.-In-Charge. , Providing & Fitting Fixing Of False Ceiling With 12 Mm Thick Prelaminated Particle Board With Approved & Standard Aluminum Section @ 600Mm C/C In Both Way Including Paintingfor The Complete Job As Per Direction Of Eng.-In-Charge. , Providing & Fitting Fixing Of White Colour Coated (Factory Printed) Aluminum Framed (24 Series, 1.50Mm Thick ) Upper Part Fixed & Sliding Shutter In 2 (Two) Track Window As Approved Design Of Department With 4 Mm Thick Plain Or Coloring Glassetc And Necessary Accessories For Suitable Locking & Handlingarrangement For The Complete Job As Per Direction Of Engineer-In-Charge. , Providing & Fitting Fixing Of White Colour Coated (Factory Printed) Aluminum Framed (24 Series,1.50 Mm Thick ) Upper Part Fixed & Sliding Shutter In 3 (Three) Track Window As Approved Design Of Department With 4 Mm Thick Plain Or Coloring Glassetc And Necessary Accessories For Suitable Locking & Handlingarrangement For The Complete Job As Per Direction Of Engineer-In-Charge. , Providing & Fitting Fixing Of White Colour Coated (Factory Printed) Aluminum Framed Window Upper Part Fixed & Open Able Shutter In 2 (Three) Part (40 Series, 1.50 Mm Thick ) With 4 Mm Thick Plain Or Coloring Glassetc And Necessary Accessories For The Complete Job As Per Direction Of Engineer-In-Charge. , Providing & Fitting Fixing Of White Colour Coated (Factory Printed) Aluminum Framed Window Upper Part Fixed & Open Able Shutter In 3 (Three) Part (40 Series, 1.50 Mm Thick ) With 4 Mm Thick Plain Or Coloring Glassetc And Necessary Accessories For The Complete Job As Per Direction Of Engineer-In-Charge. , Providing & Fitting Fixing Of Curtain Wall Over Aluminum Section With 5 Mm Reflective Glass With Necessary Accessories As Required For The Complete Job As Per Direction Of Engineer – In-Charge ( Section Specification Sub Mullion 63 Mm X 81 Mm, Jointer 57.70 Mm X 75.20 Mm) , Providing & Fitting Fixing Of Drapery Rods Have Corrugated Electric Resistance Welded Ms Pipes Of 19 Mm Diameter Fixed With Rawl Plugs And Stainless Steel Screws With Necessary Accessories As Required For The Complete Job As Per Direction Of Engineer-In-Charge , Providing & Fitting Fixing Of Aluminum Fixed Louvers Width Of 60Mm (Vista) And Fixed With Rawl Plugs, Rivet And Stainless Screws With Necessary Accessories As Required For The Complete Job As Per Direction Of Engineer-In-Charge. ( Section Specification Z Section 2.25” , U Section 2”. , Providing & Fitting Fixing Of Stainless Steelrailings ( Vista) With Round/Square/Wooden Top Handrail For Staircase/Balcony/Atrium And Fixed With Rawl Plugs And Stainless Steel Screws With Necessay Accessories As Required For The Complete Job As Per Direction Of Engineer-In-Charge , Providing & Fitting Fixing Of Vertical Blinds With Pvc Based Fabric Of Louver Width Of 50 Mm ( Vista)And Fixed With Rawl Plugs And Stainless Steel Screws With Necessary Accessories As Required For The Complete Job As Per Direction Ofengineer-In-Charge. , Providing & Fitting Fixing Of Aluminum Framed Louver (Horizontal Blinds) Width Of 25 Mm (Vista) And Fixed With Royal Plugs And Necessary Accessories Complete As Per Direction Ofengineer-In-Charge. , Providing & Fitting Fixing Of Vertical Blinds With Polyester Based Fabric Of Louver Width Of 100 Mm ( Vista)And Fixed With Rawl Plugs And Stainless Steel Screws With Necessary Accessories As Required For The Complete Job As Per Direction Ofengineer-In-Charge. , Providing & Fitting Fixing Over Aluminum Section Fir Acp Work For Exterior/Interior Purpose Of The Out Side/In Side Of The Building With 3 Mm Acp Sheet (One Side Color) ( Alstrong Or Eurobond) And Fixed With Rawl Plugs And Stainless Steel Screws With Necessary Accessories As Required For The Complete Job As Per Direction Ofengineer-In-Charge.( Section Specification: Squar: Tube: 1”X1.5”,Angle:1”X1.5”). , Providing & Fitting Fixing Of Fixed Aluminum Partition With 4.5 Mmacp Sheet (Aluminum Composite Panel Sheet) ( Both Side Color)( Alstrong Or Eurobond) And Fixed With Rawl Plugs And Stainless Steel Screws With Necessary Accessories As Required For The Complete Job As Per Direction Ofengineer-In-Charge.( Section Specification:Sg: 2.5”X1.5”,Dg:2.5”X1.5”.Taper Clip;75’, Angle: 1’X1.5”). , Providing & Fitting Fixing Of Fixed Aluminum Partition With 4 Mm Plain Coloring Glass ( Saint Gobain Or Modi Gurd) Incl. With 4.5 Mm Acp Sheet (Aluminum Composite Panel Sheet) ( Both Side Color)( Alstrong Or Eurobond) And Fixed With Rawl Plugs And Stainless Steel Screws With Necessary Accessories As Required For The Complete Job As Per Direction Ofengineer-In-Charge.( Section Specification:Sg: 2.5”X1.5”,Dg:2.5”X1.5”.Taper Clip;75’, Angle: 1’X1.5”). , Providing Fitting Fixing Of False Ceiling Over Aluminum Section With 600X600 Mm Panel With 12 Mm Thick Gypsum Board Incl. Aluminum Painting And Necessary Accessories As Required For The Complete Job As Per Direction Of Engineer-In-Charge. , Providing Fitting Fixing Of Fixed Aluminum Partition With 4 Mm Plain Or Coloring Glass ( Saint Gobain Or Modi Gurd) Incl. Door Etc And Necessary Accessories As Required For The Complete Job As Per Direction Of Engineer-In-Charge. , Providing Fitting Fixing Of Fixed Aluminum Partition With 12 Mm Pre Laminated Particle Board/4 Mm Plain Or Coloring Glass ( Saint Gobain Or Modi Gurd) Incl. Door Etc And Necessary Accessories As Required For The Complete Job As Per Direction Of Engineer-In-Charge. , Providing Fitting Fixing Of Aluminum Door ( White Colour Coated) With 1.5 Mm Lower Closer Made Of 12 Mm Pre Laminated Particle Board/6 Mm Thickplain Or Coloring Glass ( Saint Gobain Or Modi Gurd) Incl. Door Etc And Necessary Accessories As Required For The Complete Job As Per Direction Of Engineer-In-Charge. , Providing Fitting Fixing Of Anodized Aluminum Door With 1.5 Mm Thick Aluminum Section And With Upper/ Lower Closer Made Of 12 Mm Pre Laminated Particle Board/6 Mm Thickplain Or Coloring Glass ( Saint Gobain Or Modi Gurd) Incl. Door Etc And Necessary Accessories As Required For The Complete Job As Per Direction Of Engineer-In-Charge. , Providing Fitting Fixing Of Aluminum Door ( Bronze Color) With Upper Closer Or Floor Spring Made Of 4.5 Mmacp Sheet( Aluminum Compositepannelsheet) ( Both Side Color) ( Alstrong Or Eurobond) And 6 Mm Thick Plain Or Coloring Glass ( Saint Gobain Or Modi Gurd) Incl. Door Etc And Necessary Accessories As Required For The Complete Job As Per Direction Of Engineer-In-Charge. .( Section Specification:Squar:Tube:1”X1.5”,Angle:1”X1.5”). , Providing Fitting Fixing Of Aluminum Door ( White Color Coated) With Upper Closer Or Floor Spring Made Of 4.5 Mm Acp Sheet( Aluminum Compositepanel Sheet) ( Both Side Color) ( Alstrong Or Eurobond) And 6 Mm Thick Plain Or Coloring Glass ( Saint Gobain Or Modi Gurd) Incl. Door Etc And Necessary Accessories(Isi) As Required For The Complete Job As Per Direction Of Engineer-In-Charge. .( Section Specification:Squar:Tube:1”X1.5”,Angle:1”X1.5”). , Providing Fitting Fixing Of Anodized Aluminum Door With Upper Closer Or Floor Spring Made Of 4.5 Mm Acp Sheet( Aluminum Compositepanel Sheet) ( Both Side Color) ( Alstrong Or Eurobond) And 6 Mm Thick Plain Or Coloring Glass ( Saint Gobain Or Modi Gurd) Fixed With Hydraulic Floor Screws And Necessaryaccessories(Isi) As Required For The Complete Job As Per Direction Of Engineer-In-Charge. .( Section Specification: Squar:Tube:1”X1.5”,Angle:1”X1.5”). , Providing Fitting Fixing Of Aluminum Door ( White Color Coated)With 1.5 Mm Thick Aluminum Section And With Made Of 6 Mm Thick Plain Or Coloring Glass, Hydraulic Floor Spring And Necessary Accessories As Required For The Complete Job As Per Direction Of Engineer-In-Charge. , Providing Fitting Fixing Of Anodized Aluminum Door With 1.5 Mm Thick Aluminum Section And With Made Of 6 Mm Thick Plain Or Coloring Glass, Hydraulic Floor Spring And Necessary Accessories As Required For The Complete Job As Per Direction Of Engineer-In-Charge. , Providing Fitting Fixing Of Open Able Aluminum Window ( Three Part-Middle Part Is Fixed And Other Two Parts Open Able) ( Bronze Color) With 1.5 Mm Thick Aluminum Section And With Plain Glass / Coloring Glass ( 4 Mm Thick, Saint Gobain Or Modi Gurd) Etc And Necessary Job As Per Direction Of Engeneer-In-Charge. , Providing Fitting Fixing Of 3(Three) Track Sliding Aluminum Window ( White Color Coated Of Thickness 50 Micron) With 1.5 Mm Thick Aluminum Section And With Plain Glass/Coloring Glass ( 4 Mm Thick) ( Company Name: Saint Gobain Or Modi Gurd) Fixed With Rawl Plugs And Stainless Steel Screws With Necessary Accessories As Required For The Complete Job As Per Direction Of Engineer-In-Charge. , Providing And Fixing Factory Made Upvc White Colour Casement/Casement Cum Fixed Glazed Windows Comprising Of Upvc Multi-Chambered Frame, Sash And Mullion (Where Ever Required) Extruded Profiles Duly Reinforced With 1.60 ± 0.2 Mm Thick Galvanized Mild Steel Section Made From Roll Forming Process Of Required Length (Shape & Size According To Upvc Profile), Upvc Extruded Glazing Beads Of Appropriate Dimension, Epdm Gasket, Stainless Steel (Ss 304 Grade) Friction Hinges, Zinc Alloy (White Powder Coated) Casement Handles, G.I Fasteners 100 X 8 Mm Size For Fixing Frame To Finished Wall, Plastic Packers, Plastic Caps And Necessary Stainless Steel Screws Etc Profile Of Frame & Sash Shall Be Mitred Cut And Fusion Welded At All Corners, Mullion (If Required) Shall Be Also Fusion Welded Including Drilling Of Holes For Fixing Hardwares And Drainage Of Water Etc. After Fixing Frame The Gap Between Frame And Adjacent Finished Wall Shall Be Filled With Weather Proof Silicon Sealant Over Backer Rod Of Required Size And Of Approved Quality, All Complete As Per Approved Drawing & Direction Of Engineer-In-Charge. (Single / Double Glass Panes And Silicon Sealant Shall Be Paid Separately). Variation In Profile Dimension In Higher Side Shall Be Accepted But No Extra Payment On This Account Shall Be Made. Note: For Upvc Frame, Sash And Mullion Extruded Profiles Minus 5% Tolerancein Dimension I.E. In Depth & Width Of Profile Shall Be Acceptable. A) Casement Window Single Panel With S.S. Friction Hinges (300 X 19 X 1.9 Mm), Made Of (Small Series) Frame 47 X 50 Mm&Sash 47 X 68 Mmboth Having Wall Thickness Of 1.9 ± 0.2 Mm And Single Glass Pane Glazing Bead Of Appropriate Dimension. (Area Of Window Upto 0.75 Sqm.) , B) Casement Window Double Panels With S.S. Friction Hinges (300 X 19 X 1.9 Mm) Made Of (Small Series) Frame 47 X 50 Mm, Sash 47 X 68 Mm & Mullion 47 X 68 Mm All Having Wall Thickness Of 1.9 ± 0.2 Mm And Single Glazing Bead Of Appropriate Dimension. (Area Of Window Above 0.75 Sqm Upto 1.50 Sqm). , C) Casement Window Double Panels With Top Fixed With S.S. Friction Hinges (350 X 19 X 1.9 Mm) Made Of (Small Series) Frame 47 X 50 Mm, Sash 47 X 68 Mm & Mullion 47 X 68 Mm All Having Wall Thickness Of 1.9 ± 0.2 Mm And Single Glazing Bead Of Appropriate Dimension. ( Area Of Window Upto 2.50 Sqm). , D) Casement Window Single Panel With S.S. Friction Hinges (400 X 19 X 1.9 Mm) Made Of (Big Eries)Frame 67 X 60 Mm & Sash 67 X 80 Mm Both Having Wall Thickness Of 2.3 ± 0.2 Mm And Single Glazing Bead / Double Glazing Bead Of Appropriate Dimension. (Area Of Window Above 0.75 Sqm.) , E) Casement Window Double Panels With S.S. Friction Hinges (350 X 19 X 1.9 Mm) Made Of Bigseries)Frame 67 X 60 Mm & Sash / Mullion 67 X 80 Mm Both Having Wall Thickness Of 2.3 ± 0.2 Mm And Single Glazing Bead/ Double Glazing Bead Of Appropriate Dimension. (Area Of Window Above 1.50 Sqm). , F) Casement Cum Fixed Panel Window Having Both End Single Casement Panel,Middle Fixed Panels And At Top Completely Fixed Ventilator With S.S Friction Hinges (350 X 19 X 1.9) Made Of (Big Series) Frame 67 X 60 Mm , Sash 67 X 80 Mm & Mullion 67 X 80 Mm All Having Wall Thickness Of 2.3 ± 0.2 Mm And Single Glazing Bead/Double Glazing Bead Of Appropriate Dimension. (Area Of Window Above 3.00 Sqm Upto 5.00 Sqm). , Providing And Fixing Factory Made Upvc White Colour Sliding Glazed Window Upto 1.50 M In Height Dimension Comprising Of Upvc Multi-Chambered Frame With In-Built Roller Track And Sash Extruded Profiles Duly Reinforced With 1.60 ± 0.2 Mm Thick Galvanized Mild Steel Section Made From Roll Forming Process Of Required Length (Shape & Size According To Upvc Profile), Appropriate Dimension Of Upvc Extruded Glazing Beads And Upvc Extruded Interlocks, Epdm Gasket, Wool Pile, Zinc Alloy (White Powder Coated) Touch Locks With Hook, Zinc Alloy Body With Single Nylon Rollers (Weight Bearing Capacity To Be 40 Kg), G.I Fasteners 100 X 8 Mm Size For Fixing Frame To Finished Wall And Necessary Stainless Steel Screws Etc. Profile Of Frame & Sash Shall Be Mitred Cut And Fusion Welded At All Corners, Including Drilling Of Holes For Fixing Hardwares And Drainage Of Water Etc. After Fixing Frame The Gap Between Frame And Adjacent Finished Wall Shall Be Filled With Weather Proof Silicon Sealent Over Backer Rod Of Required Size And Of Approved Quality, All Complete As Per Approved Drawing & Direction Of Engineer-In-Charge. (Single / Double Glass Panes, Wire Mesh And Silicon Sealent Shall Be Paid Separately). Variation In Profile Dimension In Higher Side Shall Be Accepted But No Extra Payment On This Account Shall Be Made.A) Two Track Two Panels Sliding Window Made Of (Small Series) Frame 52 X 44 Mm &Sash 32 X 60 Mm Both Having Wall Thickness Of 1.9 ± 0.2 Mm And Single Glazing Bead Of Appropriate Dimension. (Area Of Window Upto 1.75 Sqm) , B)Three Track Three Panels Sliding Window With Fly Proof Ss Wire Mesh (Two Nos. Glazed & One No. Wire Mesh Panels) Made Of (Small Series) Frame 92 X 44 Mm & Sash 32 X 60 Mm Both Having Wall Thickness Of 1.9 ± 0.2 Mm And Single Glazing Bead Of Appropriate Dimension (Area Of Window Upto 1.75 Sqm). , C)Two Track Two Panels Sliding Window Made Of (Big Series) Frame 67 X 50 Mm & Sash 46 X 62 Mm Both Having Wall Thickness Of 2.3 ± 0.2 Mm And Single Glazing Bead / Double Glazing Bead Of Appropriate Dimension . (Area Of Window Above 1.75 Sqm Upto 2.50 Sqm). , D) Three Track Three Panels Sliding Window With Fly Proof S.S Wire Mesh (Two Nos. Glazed & One No. Wire Mesh Panels) Made Of (Big Series) Frame 116 X 45 Mm & Sash 46 X 62 Mm Both Having Wall Thickness Of 2.3 ± 0.2 Mm And Single Glazing Bead / Double Glazing Bead Of Appropriate Dimension. (Area Of Window Above 1.75 Sqm). , E) Three Track Three Panels Sliding Window Made Of (Big Series) Frame 116 X 45 Mm & Sash 46 X 62 Mm Both Having Wall Thickness Of 2.3 ± 0.2 Mm And Single Glazing Bead / Double Glazing Bead Of Appropriate Dimension. (Area Of Window Above 1.75 Sqm)
