Work Of Cutting Welding Threading Under Jen Section Kishangarh Renwal Rural Under Sub Division Kishangarh Renwal (Arc)Executive Engineerphed, Dn, Jobner-Rajasthan
TDR : 49393455
Tender Notice
BOQ
Expired
Jobner
Rajasthan
Work Of Cutting Welding Threading Under Jen Section Kishangarh Renwal Rural Under Sub Division Kishangarh Renwal (Arc)Executive Engineerphed, Dn
Name of Work: For work of cutting welding threading under Jen Section Kishangarh Renwal RURAL under Sub Division Kishangarh Renwal (ARC)EXECUTIVE ENGINEERPHED, DN
Sl. No.
Item Description
1
Turning o fvarious sizes of CID Joints Class-10/15 Completeset(Labour Charges),TheJointswillbe suppliedby the Junior Engineerconcernof Department and carting to workshop and after turning of these joints, firm is liable to transport upto Junior Engineer concern\"sstore own his cost.
2
80 mm dia
3
100 mm dia
4
125 mm dia
5
150 mm dia
6
200 mm dia
7
250 mm dia
8
Thre adingon GI Pipes different diameter as below (Rate Per MouthThre ading). The Pipes will be suppliedby the Department and carting to work shop and after thre ading of the sepipes ,firmis liable to transport upto Junior Engineer concern\"s store own his cost.
9
32mm
10
50mm
11
65mm
12
80 mm
13
101 mm
14
125mm
15
150mm
16
Welding on M.S. / G.I./CI Pipes and other material by Electric Welding, this includesall the materiallike welding rods/equi pmentlike welding machine/generater, if required for job.
17
At Work shop
18
On Site
19
Supplying of MS Rods for different sizes of sluice valveand should be supplied as according to size of old rodsincluding material and finishing for the following sizes.
20
Sluice Valve Size 80mm
21
Sluice Valve Size 100mm
22
Sluice Valve Size125mm
23
Sluice Valve Size 150mm
24
Supply in gofChuck Nut for differen tsizes of sluice valveand should be supplied as according to size of Check Nut including material for the following sizes.
25
Sluice Valve Size 80mm
26
Sluice Valve Size 100mm
27
Sluice Valve Size 125mm
28
Sluice Valve Size 150mm
29
Sluice Valve Size 200mm
30
Sluice Valve Size 250mm
31
Supplying of MS Rods and Chuck Nut (Complete Set) fordifferent sizes ofsluice valve and should be supplie dasaccording tosizeofCheckNutincluding material for the following sizes.
32
Sluice Valve Size 80mm
33
Sluice Valve Size 100mm
34
Sluice Valve Size 125mm
35
Sluice Valve Size 150mm
36
Sluice Valve Size 200mm
37
Sluice Valve Size 250mm
38
MakingReducerPumpPiecewithheavy dutypipes (Class-B) and flange (asper table-D) including cutting of pipe, thre ading welding and MS stripfor length - 100 mm, Width-20 mmand thickness- 6mm and to be welded around the strip with pipe and flanged. Hole in the flange will be standard size and above 15 mm dia. in size. After tightening the pipe3
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
