|
| 1 | Component of Works |
| 2 | Clearing compound premises of shurbs, plants, jungles etc. by cutting and removing as directed (Specific permission of Engineer-in-Charge prior to execution will be necessary). |
| 3 | Scraping of moss, blisters etc.thoroughly from interior surface of walls necessitating the use of scraper, wire brush etc.(Payment against this item will be made only when this has been done on the specific direction of the Engineer-in-charge) |
| 4 | Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed. |
| 5 | Removing loose scales blisters etc. from old painted surface and throughly smoothening the surface to make the same suitable for receiving fresh cost of paint. |
| 6 | a) Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominalsize) excluding shuttering and reinforcement,if any, in gound floor as per relevant IS codes. Pakur Variety. (Rate depend upon Site) (Analysis Rate) (Approach road = 15x1.5x0.15 + 20x2.5x0.15 =18.375cum) |
| 7 | Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches. |
| 8 | a) Roof Treatment 50mm th. With Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (12 mm nominal size) excluding shuttering and reinforcement if any, over ground floor roof for protection of roof slab from weather as per relevant IS codes (i) Pakur Variety (Rate depend upon Site) (Analysis Rate) |
| 9 | Applying 2 coats of bonding agent with synthetic multi functional rubber emulsion having adhesive and water proofing properties by mixing with water in proportion (1 bonding agent : 4 water : 6 cement) as per Manufacturer\"s specification [Cement to be supplied by the Department |
| 10 | Plaster (to wall, floor, ceiling etc.) with sand & cement mortar including rounding off or chamfering corners as directed and racking out joints including throating, nosing and drip course , scaffolding/ stagingwhere necessary.( ground floor) ( excluding cost of of chipping over concrete surface. i) With 1:6 cement mortar 15 mm. th. |
| 11 | Removing old paint from blistered painted surface of steel or other metal by chipping including scraping and cleaning and exposing the original surface. |
| 12 | Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surface by sand papering etc. |
| 13 | Painting with best quality syanthetic enamel paint of approved make and brand including smoothing surface by sand papering etc.including using of approved putty etc on the surface of necessarywith other than high glass of approved quality (with any other shade except white) On steel and other metal surface with supr glass (Two coat) |
| 14 | Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer\"s specification and as per direction of the EIC. (In Ground Floor) a) One Coat i) Water based interior grade Acrylic Primer |
| 15 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer\"s specification and as per direction of the EIC. a) one Coats In Ground Floor: |
| 16 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer\"s specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.a) Normal Acrylic Emulsion (a) In Ground floor (Two Coat) |
| 17 | Number plaque of building (plaque size up to 225 mm x 225 mm) made of sand cement plaster (1 : 2) on face of wall or plinth with 50 mm size letters P.W.D and the number of the structure formed thereon (in sunk type) including painting the letters and the number complete. |
| 18 | Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer\"s specification) including cleaning and smoothning of surface.Two Coats |
| 19 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge. |
| 20 | Add GST (SGST + CGST) @ 18% on basic price of Schedule of Work from Sl. No. 1.01 to 18 |
| 21 | Add @ 1% Labour Welfare Cess on basic price of Schedule of Work including GST from Sl. No. 1.01 to 19 |
