Tender For Competitive E-Bidding For Fabrication Job Work For Bisalpur Kisan Sahkari Chini Mills ., Ltd., Bisalpur ( Pilibhit ) For The Season 2025-26 - Pipeline Work From 1/2 Dia To 12 Dia (M.S.) 3 Dismantling Of Old Street Pipe Line And Dumping It I, bisalpur-Uttar Pradesh

Competitive E-Bidding For Fabrication Job Work For Bisalpur Kisan Sahkari Chini Mills ., Ltd., Bisalpur ( Pilibhit ) For The Season 2025-26 - Pipeline work from 1/2 dia to 12 dia (M.S.)3 Dismantling of old street pipe line and dumping it in scrap yard4 Fitting/erection of new pipe5 Making new weld in the pipe line and fitting it in place6 Making new cross, tee, reducer, nipple in the pipe line7 Dismantling of valve8 Fitting of valve9 Cutting of old street flange and fitting new flange in place10 Opening and cleaning of Magma Mascot Molasses Syrup Gas and Lime pipe lines and fitting them in place11 Cutting and removing street coils of different units and making and fitting new coils from the pipe12 Pipeline work of more than 12 dia (M.S.)13 Dismantling of old street pipe line and dumping it in scrap yard (dismantling)14 Fabricating of new pipe and erecting it in place15 Making and fitting new bend in the pipe line16 Making and fitting new cross, tee, reducer, nipple17 Dismantling the valve18 Fitting the valve19 Cutting and making new flange and fitting new flange in place20 Cutting and removing the gully coil of different units and making and fitting new coil from the pipe21 Dismantling the round/square tank and placing it at the specified place and making a new tank as per the instructions with a new plate and making all connections as per the instructions and giving leak proof trial (size 1.00 m dia / less than 1.00 m dia)22 Cutting and removing the syrup line from syrup sulphiter to syrup tank, replacing the weak part and cleaning and re-installing it23 Dismantling the round/square tank and placing it at the specified place with 3/5/6 mm plate (size more than 1.00 m dia)24 Removing the round/square tank Fabricate new 8/10/12 mm plate and fit it in place (erection and fitting) (size more than 1.00 m)25 Fabricate new neck manhole with flange and blind of various units and fit it in place with flange (above 12 dia)26 Dismantling of light structure27 Fabricate and erect light structure28 Dismantling of heavy structure29 Fabricate and erect heavy structure30 Strengthening of heavy structure31 Construct platform at various stations as per instructions and install railings, stairs etc.32 Fabricate pump/motor duct as per requirement and fit it in place33 Patch at neck in various round/square tank/vapor pipe/body34 Quad, juice heater, vapor line juice heater, Removing the hollow brass tube of size 42 x 45 x 4000 mm / 42x45x2000 mm of Vapour Cell and Semiconductor and expanding it by inserting tube and giving trial after hydraulic testing. (Brass and S.S.)35 Removing all the brass/S.S. tubes of pan and expanding it by inserting new tube and giving trial after hydraulic testing.36 Dismantling the damaged/damaged cone at any place and fabricating it with new plate and fixing it at the original place. From 0.6 m. diameter to 1.00 m. diameter37 - Similarly - 1.00 m. diameter to 1.50 m. diameter38 - Similarly - 1.50 m. diameter to 2.00 m. diameter39 - Similarly - 2.00 m. Diameter more than 40 Making and installing new lane for involute casing blower upto 2 m. anywhere in the mill and giving leak proof trial and making all connections as per requirement and cutting and removing the old lane and putting it at the specified place. 41 Straightening the old plates taken out from various plants and making them ready for use. 42 Welding the lanes of various plants again and making them leak proof. 43 Making sheds including structure etc. for various D.V. 44 Cutting and dismantling the damaged and rotten juice gutter anywhere in the mill and making and installing a new one as per instructions and giving successful trial. 45 Mill house work. 46 Cutting and removing the crooked and cut rails/square bars of can unloader and levelling the line by installing square bars and giving successful trial after strengthening it. 47 Cutting and removing the damaged and rotten runner of can carrier, secondary rack carrier and inter rack carrier and giving satisfactory trial by installing a new runner at the same place. 48 Cutting and removing the damaged/crooked supporting beam etc. of the trolley of Cane Unloader No. 2 and replacing it with a new one and levelling the trolley line and giving a successful trial.49 Hard facing on the runners of all the rack carriers of the mill.50 Cutting and removing the neck and damaged runner base of Cane Carrier, Secondary Rake Carrier, Inter Rake Carrier and replacing it with a new runner base and giving a satisfactory trial.51 For adjusting the chain of Cane Carrier under Cane Chopper, Cane Leveller and Secondary Rake Carrier, giving a satisfactory trial by making a tightening arrangement under the Cane Carrier.52 Cutting and removing the lane and damaged side plate of Cane Carrier and replacing it with a new plate and giving a satisfactory trial.53 Cutting and removing the neck, side, top and discharge plate of Fiberizer and replacing it with a new 10/12 mm, M.S. Make a new one from the plate as per drawing and fit it and give trial.54 Make and fit the side plate of mills pressure suit from new 25/32 mm plate as per drawing/sample and give satisfactory trial.55 Repair the side plate/top/bottom plate of pressure suit by fitting SS plate and replace its broken teeth with new/repaired ones and give successful trial.56 Repair the static collar by fitting SS plate in it and give successful trial.57 Make a new one from 25/32 mm plate as per sample by cutting the side plate of pressure suit of mills static collar and remove the old SS plate and fit new SS plate and do welding and re-welding in the side plate.58 Repair the throat portion of bottom/side plate of rack carrier and secondary rack

INR 2360 /-

INR 60000.0 /-

Refer document

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB