Tender For Office Contingency. “Providing And Fixing Of Water Cooler For Drinking Purpose In Administrator Office And Installation Of Office Chair, False Ceiling Etc. Complete In All Respect In Hsvp Office Buinding Sector-3, Rohtak. A/C Rs. 1.95 Lacse/M , Rohtak-Haryana
TDR : 49385724
Tender Notice
BOQ
Expired
Rohtak
Haryana
Tender For Office Contingency. “Providing And Fixing Of Water Cooler For Drinking Purpose In Administrator Office And Installation Of Office Chair, False Ceiling Etc. Complete In All Respect In Hsvp Office Buinding Sector-3, Rohtak. A/C Rs. 1.95 Lacse/M
Name of Work:Office Contingency. “Providing and fixing of Water Cooler for drinking purpose in Administrator Office and installation of office chair, false ceiling etc. complete in all respect in HSVP Office Buinding Sector-3, Rohtak. A/c Rs. 1.95 LacsE/M Rs. 3900/-Time Limit: One (01) Month
Sl. No.
Item Description
1
App. Item) Providing and fixing of Water Cooler for drinking purpose of capacity.
2
30.22) Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
3
11.72.2) Painting with silicon and acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces:Two coats.
4
App. Item) Supply and installation of High Back Chair, Geenken make etc. complete in all respect.
5
20.71.1) Supply, erection, testing of Ceiling fans IS marked (as per IS code 374) with suitable GI pipe complete in all respects complete as per directions of Engineer-in-charge.48\" (1200mm).
6
23.2.4.1) COPPER WIRING WITH MODULAR SWITCHES IN MS CONDUITS (SURFACE/RECESS)Wiring in MS conduit system for 3-pin 5amp. Plug point by using 2 no 1.5 sqmm FRLS copper wire and 1 no 1.5 Sqmm FRLS copper wire, including providing 1 no 5/6 Amp 3/5 pin Modular type socket and 1 no 5/6 Amp Modular type switch required GI Box, modular face plate etc. complete as required Group B.
7
9.46.3) Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts and bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering up to 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer`s specification and also including the cost of making openings for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge butexcluding the cost of painting with:12.5 mm thick tapered edge gypsum moisture resistant board
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
