|
| 1 | Provision of public drinking water supply and cold drinking water facility in Phapsi market area and installation of cold and pure drinking water at Bargaon chowk under Bhadra Gram Panchayat under CSR. |
| 2 | Excavating in trenches, (soft/loose soil) n exc 1.5 m wide and n exc 1.5 m in depth, for foundation, manholes, pier holes, etc. and getting out. |
| 3 | Excavting in post holes (Soft/loose soil) and removing from the premises. |
| 4 | Surface dressing (Soft/loose soil) n exc 15 cm deep |
| 5 | M&L, for Sand filling under floors or in foundations including watering and consolidation . |
| 6 | M&L, for Moorum/red bajri filling in pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering. |
| 7 | M&L, for anti termite treatment at the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area. |
| 8 | M&L, for Cement concrete in foundations, Type B2, 1:2:4(40mm graded aggregate) |
| 9 | M&L,for Providing, cement concrete type B1, 1:2:4 (20mm graded aggregate) in copings, water troughs including for use of form work. |
| 10 | M&L, for Providing, precast cement concrete Type B1, 1:2:4 (20 graded aggregate and set in 1:4 cement mortar) cover slabs for man holes, soak pit etc. |
| 11 | M&L, for Reinforced cement concrete M-20 grade, 1:1½:3, (20mm graded aggregate) in foundations, including footings, foundation beams, plinth beams, bases for columns, etc. |
| 12 | M&L, for Reinforced cement concrete M-20 grade, 1:1½:3, (20mm graded aggregate) in Slabs supported on walls, beams and columns etc. |
| 13 | M&L, for Reinforced cement concrete chajjas, M-20 grade, 1:1½:3, (20mm graded aggregate) |
| 14 | M&L, for Reinforced cement concrete Beams, cantilevers, lintels over 1.5m span, M-20 grade, 1:1½:3, (20mm graded aggregate) |
| 15 | M&L, for Reinforced cement concrete column, M-20 grade, 1:1½:3, (20mm graded aggregate) |
| 16 | M&L, for Brickwork (Old size) with fly ash bricks, straight or curved on plan exc 6m mean radius, built in 1:6 cement mortar. |
| 17 | M&L, for Brickwork (Old size) with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in 1:4 cement mortar. |
| 18 | Cutting chases for concealed water tubing and pointing in cement mortar 1:3 , cutting not exc 10 cm girth . |
| 19 | Cutting holes into brick walls built in cement mortar of 10cm deep and making good in cement concrete 1:2:4 type B-l .(Superficial area N.exc. 150sq.cm) |
| 20 | M&L, for Formwork to sides of concrete foundations, footings, bases of columns, sides and soffits (if any) of foundation and plinth beams. |
| 21 | M&L, for Formwork to soffits of suspended slabs such as roof slabs of rough finished. |
| 22 | M&L,for Formwork to chajjas of rough finished. |
| 23 | M&L, for Formwork to sides of pillars of rough finished surfaces and of square or rectangular. |
| 24 | M&L,for Formwork to sides and soffits of floor or roof beams, lintels of roughfinished. |
| 25 | S&F, for Mild steel barred iron doors including pintle hinges, stops,hand-made sliding bolts, etc. |
| 26 | M&L,for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip. MAKE TATA/ SAIL/ JINDAL PANTHER/ JSW / VEDANTA / VIZAG STEEL. |
| 27 | Same as item No. 25 but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders. |
| 28 | M&L, for Mild steel grills. |
| 29 | M&L,for mild steel work in tubular structure including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240, one shop coat of zinc chromate primer paint (including preparation of surface) at Contractor’s workshop before fabrication. |
| 30 | S&F, for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. Make TATA/JINDAL |
| 31 | Raking out joints/ pointing to brick work in walls built in 1:4 cement mortar. |
| 32 | M&L, for rendering 12mm thick cement plastering of 1:4 cement mortar on fair faces of brick work or concrete surfaces. |
| 33 | M&L, for rendering 5mm thick cement plaster on fair faces of concrete surfaces. |
| 34 | S&F, Non - skid Ceramic colored tiles 7 to 8 mm thick,area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. over screed bed or bedding layer of 15mm thick of 1:4 cement mortar, set and jointed in neat cement slurry and pointed in white or coloured cement to match. Make KAJARIA/ SOMANY/ HR JOHNSON / CERA SANITARY WARE LTD./ ASIAN GRANITO / ORIENT BELL/ HSIL/ NITCO |
| 35 | S&F, for Glazed ceramic colored tiles in vertical surfaceof size 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match. Make KAJARIA/ SOMANY/ HR JOHNSON / CERA SANITARY WARE LTD./ ASIAN GRANITO / ORIENT BELL/ HSIL/ NITCO |
| 36 | S&F, for Chequered cement concrete tiles 30cm x 30cm x 25mm thick, (with white cement and pigments) over screed bed or bedding layer of 15mm thick of 1:4 cement mortar, set, jointed and pointed in neat cement slurry in floors, |
| 37 | M&L, for Cement concrete floor type B-2,1:2:4(40mm graded aggregate) of 150mm thick including for Use and waste of form work/screed strips,finishing surfaces of concrete in sub-floors, sub-bases, etc.even and rough to receive the topping layer. |
| 38 | M&L, for Cement concrete floor of 100mm thick, type B-1, 1:2:4 (20mm graded aggregate) including for Use and waste of form work/screed strips,finishing surfaces of concrete topping even and fair (without using extra cement) |
| 39 | M&L, for Cement concrete floor of 40mm thick, type B-1, 1:2:4 (20mm graded aggregate) including for Use and waste of form work/screed strips,finishing surfaces of concrete topping even and fair (without using extra cement) |
| 40 | S&F, for 38mm width glass dividing strips of 3 mm thick. |
| 41 | M & L, for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. Make ASIAN/BERGER/NEROLAC |
| 42 | M & L, for,applying two coat of distemper oil emulsion on walls over apriming coat of Chalk whiting, on plastered surfaces .Make ASIAN/BERGER/NEROLAC |
| 43 | M & L,for applying two coat of synthetic enamel paint on steel surfaces over a priming coat of red oxide. Make ASIAN/BERGER/NEROLAC |
| 44 | S&F, for 25mm dia low density polyet hylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc. Make KASTA/SUPREME/FINOLEX/ASTRAL LTD./ASHIRVAD PVT.LTD./DUTRON/PRINCE |
| 45 | Ditto but 20mm dia LDPE pipes. |
| 46 | Ditto but 15mm dia LDPE pipes. |
| 47 | S&F, for 1000 ltr capacity Rotational moulded polye thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in MESSSR Part I-2009 including for 25mm dia. ball brass valves,high pressure,with polythene float and flynut complete,screwed for iron pipe or brass ferrule. Make SINTEX/SUPREME/PLASTO |
| 48 | S&F,for 15mm dia. Push tap any colour high pressure of PTMT screwed for iron pipe and fixed, (Minimum weight 15mm-47gms/20mm- 75gms)bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm-125gms). |
| 49 | M&L, for 20mm dia. stop valve of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/ 20mm-92gms) . |
| 50 | S&F,for 50mm dia.waste fittings, brass,chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed . |
| 51 | S&F, 110mm dia. PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor. Make KASTA/SUPREME/FINOLEX/ASTRAL LTD./ASHIRVAD PVT.LTD./DUTRON/PRINCE |
| 52 | S&F, 75mm dia. PVC (SWR) floor trap, plain with grating including jointing with solvent cement. |
| 53 | M&L, for Concrete bed to 100mm dia. drain pipes including forming cradles in cement concrete 1:3:6, Type-C2 |
| 54 | S&F, 50mm dia. low density polyethylene pipes (LDPE) of pressure rating 6 kg/ cm2laid in trenches.Make KASTA/SUPREME/FINOLEX/ASTRAL LTD./ASHIRVAD PVT.LTD./DUTRON/PRINCE |
| 55 | S&F, for 110mm diaPVC (SWR) bends any radius. |
| 56 | S&F,for drinking water cooler of capacity 120 litre and discharge of 60 litres/hour. Make BLUE STAR/ VOLTAS/USHA |
| 57 | S&F,for fully automatic with auto cut off RO+ UV portable water purification system. (RO12 LPH) MAKE AQUAGUARD/HAVELS/KENT/V-GUARD |
| 58 | Providing and laying 60mm thick factory made chamfered edge cement concrete rubber moulded paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. |
| 59 | Supply & fixing of 6 to 32Amp rating,Single Pole, 240 V, 10KA \"C\" Curve miniature circuit breaker (MCB) in the existing MCB DB complete with connection, testing & commissioning.The material to be used shalle of ISI marked & of reputed make like Legrand, Havells, V-Guard, Polycab etc. |
| 60 | Supply & fixing of 32 Amp, 240 V, Double Pole Residual Current Circuit Breaker with Overcurrent Protection (RCBO) for earth leakage, overload & short-circuit protection with Sensitivity 30 mA in the existing MCB DB complete with connection, testing & commissioning. The material to be used shalle of ISI marked & of reputed make like Legrand, Havells, V-Guard, Polycab etc. |
| 61 | Cutting chases for concealed conduit wiring etc. and making good, cutting not exc 10 cm girth. |
| 62 | Material & Labour for one light or one fan point wiring in PVC conduit with 1.5 sq.mm single core FRLS copper conductor cables to be controlled by one switch. The material to be used shalle of ISI marked & of reputed make like Legrand, Havells, V-Guard, Polycab etc. |
| 63 | Material & Labour for circuit/submain wiring alongwith earth wire with 2 x 2.5 Sq. MM + 1 x 2.5 Sq. MM Earth Wire of FR PVC Insulated copper conductor, single core cable inPVC conduit in recessed as required. The material to be used shalle of ISI marked & of reputed make like Legrand, Havells, V-Guard, Polycab etc. |
| 64 | Material & Labour for Ceiling rose, 3 Pin, PVC/Polycarbonate, Isolated Body.The material to be used shalle of ISI marked & of reputed make like Legrand, Havells, V-Guard, Polycab etc. |
| 65 | Supply & fixing of modular switches 1 Way, 6 Amp, 1 Modulein the existing switch board including connection & testing. The material to be used shalle of ISI marked & of reputed make like Legrand, Havells, V-Guard, Polycab etc. |
| 66 | Supplying & fixing of 2/3 Pin, 6 A, Combined Socket , 2 Module.The material to be used shalle of ISI marked & of reputed make like Legrand, Havells, V-Guard, Polycab etc. |
| 67 | Supply & fixing of modular switches 1 Way, 16 Amp, 1 Modulein the existing switch board including connectio & testing. The material to be used shalle of ISI marked & of reputed make like Legrand, Havells, V-Guard, Polycab etc. |
| 68 | Supplying & fixing of 2/3 Pin, 6 A/16A Combined Socket , 2 Module.The material to be used shalle of ISI marked & of reputed make like Legrand, Havells, V-Guard, Polycab etc. |
| 69 | Material & Labour for modular white cover plate with frame, 2 Module. The material to be used shall be of ISI marked or conforming to relevant IS & of reputed make like Legrand, Havells, V-Guard, Polycab etc. |
| 70 | Material & Labour for modular white cover plate with frame, 6 Module. The material to be used shall be of ISI marked or conforming to relevant IS & of reputed make like Legrand, Havells, V-Guard, Polycab etc. |
| 71 | Material & Labour for Modular Metal Flush Box, 2 Module. The material to be used shall be reputed make like Legrand, Havells, V-Guard, Polycab etc. |
| 72 | Material & Labour for Modular Metal Flush Box, 6 Module. The material to be used shall be reputed make like Legrand, Havells, V-Guard, Polycab etc. |
| 73 | Supply & fixing of 1 x 20 Watt, 220 V AC, LED Light fittings with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. Make of LED Light fittings to be provided shall be of Phillips/Bajaj/Havells, Syska. |
| 74 | Material & Labour for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or buried in ground or drawn in conduitpipe for loop earthing etc. as required with 4mm dia galvanized iron wire. |
| 75 | Supplying & fixing of 6 way double door, single pole neutral sheet steel MCB distribution board, 240 V, on surface/recess, complete with neutral bus bar, earth bus bar, din rail, powder painted including interconnection, testing & earthin etc. as required. It includes wall cutting & making good the same for fixing of above MCB distribution board. The material to be used shall be reputed make like Legrand, Havells, V-Guard, Polycab etc. |
| 76 | Supplying & fixing single pole blanking plate in the existing MCB DB Complete etc. as required. |
| 77 | Material & Labour for earthing with GI earth Pipe of 4.5 Meter Long, 40 MM Dia Including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required.This also includes earth excavation, earth pit chamber construction and earth refilling. |
| 78 | Supply, installation, testing & commissioning of Solar Water pumping system with suitable Solar Photo Voltaic Panel (Approx. 2 KWp) to be installed on existing RCC roof top for Borewell system including digging of Borewell with casing pipes of 300 Feet including other accessories i.e. 1 Set of 1 HP Submerssible Pump, Submerssible Water Pipe: 350 Feets, Submerssible Power Cable: 350 Feets, 1 Set of Pump Starter with Water Level Controller. It also includes suitable solar inverter (Approx. 2 KW) for functioning of 01 No. of Water Cooler & 1 No. of Water Purifier.It also includes DC cable from Solar Panel to Inverter & AC Power Cables from Inverter to Main Distribution Board. The material to be used shall be reputed make & should be conforming to relevant IS. |
