|
| 1 | Dismantling the existing wooden / Aluminum partitions into small units including removing doors, glass panes, etc., transporting, plaining, cutting, and re-assembling of partitions, doors, glass panes etc., complete. Rate quoted shall include the cost of all materials required for reassembling such as nails, screws, fevicol etc. all as directed by the Engineer-In-Charge. |
| 2 | Dismantling the existing wooden / Aluminum partitions into small units including removing doors, glass panes, etc., transporting and stacking carefully for reuse, in the departmental stores complete. All as directed by the Engineer-In-Charge. |
| 3 | Repairs to the existing wooden / Aluminum partitions and doors, removing the bends, repairing the spoiled/damaged joints of frames and re-fixing them in position including cutting, planning etc., complete all as directed by Engineer-In-Charge. The work and rate includes the removal of glass panes and doors if any and re-fixing them in position. The rate quoted shall include cost of all materials required for the work such as nails, screws, Fevicol etc. |
| 4 | Supply and Fixing of glazing in Aluminum door, window, ventilator shutters and partitions etc., with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-In-Charge. - 5.5mm Thick, Make: Modi float / Saint Gobain |
| 5 | Supply and Fixing of 12mm thick pre-laminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade-1 Type-II, in paneling fixed in Aluminum doors, windows shutters and partition frames with CP brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-In-Charge. |
| 6 | Supply and Fixing of Aluminum partitions with new anodised aluminum box section of size 101.60 x 44.45 x 2.00 mm for verticals, and with 63.50 x 38.10 x 2.00 mm for horizontals, spacing suitable to the site requirements and as approved by Engineer-In-Charge. Wherever doors are coming wooden runners are to be provided in the box section. The rate shall include grouting of frame to the floor properly fixed at ends to walls, cost of Aluminum sections, labour etc., complete all as directed by Engineer-In-Charge. The door opening shall be deducted for payment. |
| 7 | Supply and Fixing of Aluminum door shutters made out of new anodised aluminum box section of size 44.50 x 47.50 x 2.00 mm for verticals, top and middle rails and 101.60 x 44.50 x 2.00 mm for bottom rail inclusive of supply and fixing of all Aluminum fixtures and fittings such as 2 Nos. handles; 1 No of tower bolt 12 mm dia 200 mm long; 1 No of hydraulic door closure of IS specification; 3 Nos. of 4\" long (100 mm) butt hinges; 1 No stopper and suitable locking arrangement etc., complete all as directed by Engineer-In-Charge. |
| 8 | Supply and Fixing of Aluminum window grills of size 1.50 m x 1.80 m approx. and 1.20 m x 1.80 m approx. along with Aluminum frame consisting Aluminum \"F\" (solid) 0.80 kg / 12 inch supply and fixing of design of 4\" aperture Aluminum grill to the above frame work with necessary fixtures. It includes fixing of total frame to the existing brick work, finishing etc., complete all as directed by Engineer-In-Charge. (The material shall be Aluminum alloy as per IS: 6063, thick 7 mm, ultimate tensile strength more than 19 kg/Sq.m) |