|
| 1 | S&F 0.63mm thick galvanized corrugated mild steel sheeting with two corrugation side lap, fixed with L-type or J-type or cranked hook bolts in roofsin roofs, walls etc. with grade of zinc coating 275 including dismantling of old plain or corrugated steel sheeting, any gauge, thickness, including Nainital orsimilarpattern roof coverings, complete all as specified and as directed.Note:(i) The work shall be execute upto and includind 4th storey bldgs.(ii) The work shall also be execute in small patches to cover holes cut for old pipes - area of sheet to be repaired approx 0.15 sqm to 0.25 Sqm only.(iii) The quoted rates shall be inclusive of all above effects including scaffolding work required at site for execution of work etc. Nothing extra shall be admissible to contractor on this account. |
| 2 | M&L for Pre Polished Green Marble work 18 to 20mm thick (table rubbed and polished) in one piece in steps, jambs, pillars, windowcills, cooking platforms, skirting, other veertical surfaces and like in cement mortar (1:4) screed bed/backing coat 15 mm thick including rounding to edges/ nosing in steps/ cooking plateform/ windowcills etc and pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade and incl dismantling of stone slabs and tiles of any description or thickness, complete all as specified and as directed. |
| 3 | Taking down & refixing shutters of any descriptionexc 1 sqm and n exc 2 sqm each after cutting, adjusting and refixing all builders hardware to facilitate flooring repair, complete all as specified and as directed. |
| 4 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and as directed. |
| 5 | M&L for 100 mm thick cement concrete (1:4:8) type D2 (using 40mm graded crushed stone aggregate) as in sub floors, complete all as specified and as directed. |
| 6 | M&L for providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand, complete all as specified and as directed. |
| 7 | Taking down steel doors (weighing 250 to 350 Kg each) and refixing in same opening after adjusting by cutting / welding of hinges made of angle iron section with ball bearing of suitable size (03 hinges in each shutter) to suit the raising of floors, complete all as specified and directed. |
| 8 | M&L for Brick work in small patches for repair around the hinges of steel doors, closing holes in brick work in 2/3 storey bldgs, eaves filling and similar works or any other kind of brick work with sub class \"B\" bricks straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6, incl demolition of brick work, complete all as specifed and as directed. |
| 9 | S&F PVC covering to MS handrail 50 mm wide (as per sample held at Office of AGE B/R-III) fixed with adhesive (to make up forall missing coverings) complete all as directed. |
| 10 | M&L for cement concrete (1:2:4) type B1 (using 20 mm graded crushed stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed blocks to hold holdfast of steel doors, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specifed and as directed. |
| 11 | M&L for rendering in two coats, 10mm thick (1st coat) in CM 1:6 and 5 mm thick (2nd coat) in CM 1:4 using water proofing compound (as per manufacturer\"s instructions) on other than fair faces of brick work or concrete surfacesand including taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. and preparing old wall surfaces to receive new plaster complete all as specified and directed. |
| 12 | M&L for preparation of newly plastered surfaces of walls and applying two coats of cement based paint complete all as specified and as directed. |
| 13 | M&L for applying two or more coats of 100% premium exterior acrylic emulsion paint, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed. |
| 14 | M&L for preparation of old decorated plastered/ unplasterd surfaces of walls and applying two coats of cement base paint complete all as specified and as directed. |
| 15 | M&L for preparation of old plastered/ unplasterd white washed surfaces of walls and applying two coats of white wash complete all as specified and as directed. |
| 16 | S&F 20 mm outer dia 3-layer PP-R (Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilizedand antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc incl taking up or down steel/PP-R tubing and connections, including cleaning for re fixing or removal to store complete all as specified and directed. |
| 17 | S&F 25 mm outer dia 3-layer PP-R (Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilizedand antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc incl taking up or down steel/PP-R tubing and connections, including cleaning for re fixing or removal to store complete all as specified and directed. |
| 18 | S&F 32 mm outer dia 3-layer PP-R (Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilizedand antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc incl taking up or down steel/PP-R tubing and connections, including cleaning for re fixing or removal to store complete all as specified and directed. |
| 19 | S&F in repair 20 mm PP-R Gate valves (brass insert) as per requirement of the site with 20mm outer dia of pipe complete all as specified and as directed. |
| 20 | S&F in repair 25 mm PP-R Gate valves (brass insert) as per requirement of the site with 25mm outer dia of pipe complete all as specified and as directed. |
| 21 | S&F in repair 32 mm PP-R Gate valves (brass insert) as per requirement of the site with 32mm outer dia of pipe complete all as specified and as directed. |
| 22 | S&F in repair 20 mm PP-R unions (brass insert) as per requirement of the site with 20mm outer dia of pipe complete all as specified and as directed. |
| 23 | S&F in repair 25 mm PP-R unions (brass insert) as per requirement of the site with 25mm outer dia of pipe complete all as specified and as directed. |
| 24 | S&F in repair 32 mm PP-R unions (brass insert) as per requirement of the site with 32mm outer dia of pipe complete all as specified and as directed. |
| 25 | S&F in repair GI clamps/supports incl necessary screws for PP-R pipes/steel tubing (of 20 to 32 mm dia) to replace old unserviceable/missing clamps complete all as specified and as directed. (Work in 2/3 storey high bldgs). |
| 26 | M&L for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying a coat of synthetic enamel paint complete all as specified and directed. |
| 27 | M&L for Virified Ceramic tiles 9-10 mm thick (square/ rectangular) polished, area of each tiles notexceeding 0.36 sqm, in floors & skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with shade of tile over and including 15 mm thick screed bed/backing coat in cement mortar 1:6 and dismantling floor, hearth or wall tiles complete all as specified and as directed. |
| 28 | Notes :-An amount of Rs. 36,378.00 on account of Credit Schedule for Schedule \"A\" Part-II shall be deducted from total quoted amount of BOQ to arrive at the contract sum. |
