|
| 1 | Supplying and fixing of chain link fencing with angle iron posts 50x50x6mm placed at every 3 Mtr. apart 30cm in ground embedded in cement concrete 1:3:6 (30x30x45cm) corner and every tenth post to be strutted with (50 x 50 x 6cm) angle iron provided and fixed and fitted with posts including earth work in excavation etc. complete with chain link size..50mm x 50mm x 3.15mm |
| 2 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils |
| 3 | Carriage of earth, sand, lime, morrum, manure or sludgeincluding loading/ unloading etc. complete with leadu upto 5km |
| 4 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. (\"Original producers\" who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to IS:1786)Thermo-mechanically Treated bars (Conforming of relevent IS code) |
| 5 | Providing laying, spreading and compacting specified graded crushed stone in sub-base course including premixing the material at OMC in wet mix plant, carriage of mixed material, laying in uniform layers with motor grader, F.E.loaderonapreparedsurfaceandcompactingwith vibratory compactorto achieve the desired density including all material, labour, mach-nery, lighting barricadingandmaintenanceofdiversion complete.[MoRTH specification Clause 401] includiong with all lead For Grading III Material |
| 6 | Providing, laying, spreading (with paver finisher only) and compacting wet mix macadam (WMM) base course comprising of graded stone aggregate and granular material conforming to MORT&H specifications (Table 400-II) in layers of equal compacted thickness each consolidated, including pre-mixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tippers to site, laying in uniform layers in base course on a well prepared sub-base/ base course and compacting with power vibratory-roller to achieve the desired density complete as per MoRT&H specification clause - 406 including all material, labour, machinery, lighting, guarding and maintenance of diversion. |
| 7 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). |
| 8 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M20 grade Nominal Mix1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stoneaggregate 20 mm nominal size). |
| 9 | Supply&Stackinggoodearthatsitecompleteincludingloadingunloading&transporationetc. |
| 10 | Spreading of manure and good earth in required thickness (cost of manure and good earth to be paid separately). |
| 11 | Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide |
| 12 | Painting with synthetic enamel paint of approved brand and manufacture togive an even shade : Two or more coats on new work |
| 13 | Providing and applying premixed seal coat Type \"B\" comprising of thin application of fine aggregate 0.06 cum/ 10 sqm premix with bitumen binder @ 6.8 Kg/ 10 Sqm (including cost of anti-stripping compound wherever required) laying with paver finisher with electronic sensor control and rolling with power roller 8-10 tonne complete as per clause 513 of MoRT&H specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. With Bitumen VG-grade 30 |
| 14 | Providingandlaying25mmthickmasticasphaltwearing coursewithpavinggradebitumen(PMB-40)meetingthe requirements given in Table 500-29, prepared by using mastic cookerand laid to required level and slope aftercleaning the surface,includingprovidinganti-skidsurfacewithbitumen precoated fine grained hard stone chipping of 13.2 mm nominal size atthe rateof0.005 cumper 10 Sqm and at an approximate spacing of 10 Cm center to center in both directions, pressed into surface when the temperature of surfacesisnotlessthan1000C,protruding1mmto4mm over mastic surface, all complete as per MORTH specification Clause 515. |
| 15 | Providing and laying 12 mm thick mastic asphalt wearing courseontopofdeckslabexcludingprimecoatwith pavinggradebitumenmeetingtherequirementsgivenin Table 500-20, prepared by using mastic cooker and laid to required level and slope after cleaning the surface, includingprovidinganti-skidsurfacewithbitumen precoatedfinegrainedhard stonechipping of 9.5mm nominal size at the rate of 0.005 cum per 10 Sqm and at an approximate spacing of 10 cm. center to center in both directions,pressedintosurfacewhenthetemperatureof surfacesnotlessthan100degreeC,protruding1mmto 4mmovermasticsurface,allcompleteasperMoRTH specification clause 515, 2702. |
