Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Repairs to Existing Trench gallery at annapurna river Dahibav.600 mm dia RCC Slotted Pipe in two rows length = 40 m each. |
| 2 | Providing labours for site cleaning .Helper |
| 3 | Providing, constructing coffer dam in river basin / dam storages as per type design including excavation, filling the middle portionwith B.C. soil (in gunny bags if required). Providing impervious / semipervious materialson both sides of B.C. soil (in gunny bags ifrequired) including ramming, compacting to the satisfaction of Engineer-in-charge till the completion of work including dismantling coffer dam after completion of works and disposing off the material as directed by the Engineer-in-charge. |
| 4 | Excavation in general in soft materialcomprising of soft soil, soft murum,sand,hard murum with boulders in wetor dry condition for HeadWorks i.e.IntakeWell,Connecting Pipe, JackWell,Pump House, SupplyWell,etc.for lift 0 to1.5 M and lead of 150M includingbarricading , guarding, disposing offsurplus excavated stuff within a radius of0.5 km.as directed by Engineer-in-charge,etc.complete excluding refilling |
| 5 | Lift 0.00 to 1.5 m |
| 6 | lift 1.50 m to 3.00 m |
| 7 | Dewatering charges for estimation purpose for head works in river basin or dam. |
| 8 | Intake Well of 3 M dia. |
| 9 | Connecting Main |
| 10 | Desilting the Supply Well, Intake Well / Head Works, Sump of water supply / sewerage works etc. in wet or dry condition including lifts upto 9 M and lead upto 150 M as required beyond the work site, stacking, spreading, including necessary guarding, etc. complete, as directed by Engineer-in-charge. |
| 11 | Dismantling deadpipe lineofM.S./R.C.C./ C.I./ .S.C.andG.I./A.C./P.V.C./S.W./H.D.P.E. pipe including cost of necessary excavation and refilling of trenches, breakingthe joints,lifting the pipes and stacking to theplace as directed by Engineer-in-charge withall leads and lifts including cleaning thesurface, etc.complete. |
| 12 | 450 mm Dia |
| 13 | Providing dry trap/ granite/ quartzite/ gneiss, rubble stone soling in 15 cm to 20 cm thick layers including hand packing and compacting, etc.complete. |
| 14 | Providing at site of works ISI standard RCCslotted pipes of NP-3 class including cost ofall central and local taxes, octroi,inspection, transportation,etc.complete including cost ofRCC collar,etc.complete. |
| 15 | 450 mm Dia RCC P II Pipe |
| 16 | 600 mm Dia RCC Slotted Pipe |
| 17 | Lowering, laying and jointing RCC slotted pipes of following diameters including all leads and lifts,cost of jointing material,labour,etc. Complete as directed by Engineer-in-charge. |
| 18 | 450 mm Dia RCC P II Pipe |
| 19 | 600 mm Dia RCC Slotted Pipe |
| 20 | Filling in plinth and floors / trenches with contractor\"s murum for bedding in 15 cm to 20 cm layers including watering and compaction, etc. complete. |
| 21 | Available murum |
| 22 | Providing dry rubble stone pitching 23cm (about 9) thick including all material, quarry spalls, labour etc. complete. |
| 23 | Providing & laying in situ,followinggrade of trap /granite /quartz/ gneiss metalfor foundation and bedding including dewatering from work compacting and curing, finishing, etc. complete |
| 24 | M-150 |
| 25 | Providing internal cement plaster 12mm thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, with waterprofingin all position including scaffolding and curing etc. |
| 26 | Providing course laterite stones masonory in cement mortar 1:6 in foundation & plinth including raking out joints when plastering is to be done and striking joints etc.complete. |
| 27 | Providing, lowering, laying and placing in position, shrouding material for porous pipe gallery / slotted pipe gallery / trench gallery with all leads and lifts involved including transportation of materials to site of works, screening and washing of materials and placing in position with given section, etc. complete as directed by Engineer-in-charge. |
| 28 | Available murum |
| 29 | Available murum |
| 30 | Available murum |
| 31 | Available murum |
| 32 | Available murum |
| 33 | Providing , installing , comm.& testing of 120 BHPV.T.Pump set & allied worksat Hed works. Q= 120000 LPH Head =168 m. |
| 34 | I/1:-V.T.Pump Set Providing, installing ,comm. With test & trial of V.T.Pump set Capable of discharging 120000 LPH Water against a total head of 168 mtr from all causes including bowl assembly,column assembly discharge head ,Sole plate, frame, Pressure gauge,channel iorn & as per detailed specifications etc comp.(Market Rate as per Rate Analysis) |
| 35 | I/2:-VHS Motor:-(120HP)(TEFC)Providing, erecting and giving test and trial of 120HP vertical hollow shaft motor 1500 RPM, squirrel cage induction motor, TEFC conforming to IS 12615, class IE3 premium, having continuous rating suitable for operation at 415 Volts +/-10%, 3Phase, 50 Hz +/-5% with \"F\" class insulation temperature rise limited to class \"B\" insulation etc comp.(As per R.A) |
| 36 | I/3(A):- F/A ATS Starter:-( 120HP) Providing erecting and giving test and trial of Fully Automatic, Auto Transformer Starter with Air Break Contactor, assembled locally with contactors of approved make in 14 SWG sheet steel fabricated, floor mounted type cubical panel, suitable for operation on 380 - 440 Volts, 3 Phase, 50 Hz, fitted with accessories as below. The incoming and outgoing cable end boxes shall be on either sides of main panel. The cable entries from autotransformer shall be totally enclosed in sheet metal. The starter shall have screened louvers on both sides.etc 1) Oil immersed copper wound auto transformer with 50%,65%, and 80% tapping including first fill of oil.2) All Air Break Contactors of AC 3 duty of suitable rating as mentioned.3) Bimetallic overload relay.4) Timer ON and OFF delay.5) Master timer.6) Ammeter with CTs and selector switch.7) No Volt release.8) Motor \"ON\", \"OFF\" and \"TRIP\" indication lamp.9) Motor Protection Relay, solid state with protection CTs.10) Thermostat with 1 NO + 1 NC for Oil temperature.11) Door interlock switch with 1 NO + 1 NC.12) Control fuse.Starter for Motor HP / Contactor Rating \" Main/ Start/ Run Cubical Panel Size-1.5 m height X 0.9 m width X 0.5 m deep.120 HP (300/150/150).(As per R.A) |
| 37 | I/4:-L.T.Panel board (Cubical type):-Providing, installing ,comm. With test & trial of floor mountingCubical type L.T. Panel board including all acessories & as per detailed specifications etc comp.(As per R.A) |
| 38 | I/5:-(A)APFC PANEL:-Supplying and erecting 100 kVAr, 440 V 3 phase, 50 Hz., thyrister switched micro APFC passive filter panel, consisting of suitable steps of APP type capacitor units with harmonic filter reactors, as per specification no CP-ED/ APFC (PWD (E ) DSR No.6.7.13,P.122) |
| 39 | I/5:-(B)Arm. Cable for APFC PANEL:-Supplying, erecting & terminating XLPE armoured cable 3½ core 150 sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no.CB- LT/AL(Double run) (PWD Elect DSR No.7-1-21,P.127) |
| 40 | I/6 (a):- Armoured Cable:- (Double Run) Supplying, erecting & terminating XLPE armoured cable 3½ core X2 runX 240 sqmm aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as perspecification no. CB-LT/AL etc comp.(From Transformer to L.T.Panel board)(Double Run)(As per R.A) |
| 41 | I/6 (C):- Armoured Cable:- Supplying, erecting & terminating XLPE armoured cable 1100 V 3½ core 185 sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL(Double run)etc comp.(From Panelto Starter & Starter to motor)(As per R.A) |
| 42 | I/7 (a):-Earthing Arrangement:- Providing earthing with galvanized iron earth plate size 60x 60x0.6 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover complete with all materials, testing & recording the results as per specification no. EA-EP etc comp.(As per R.A) |
| 43 | I/7(b):-G.I.Strips:- Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification no EA-EP. etc comp.(As per R.A) |
| 44 | I/8 (a):- 200mmdia Sluice Valve:(Cast steel) Providing erecting 200mm dia.Cast Steel D/F Sluice Valves /Butterfly Valves with jointing to pipe work (including all hardware and packing ) water works quality having non-rising spindle with hand wheel and without bypass arrangement, spindle of stainless steel as per requirement, inspection charges, transportation upto departmental store, unloading,stacking,excluding GST levied by GOI & GOM in all respect etc. excluding C.C.foundation / structural steel support.For Rating Class 300 (Working Pressure 52 kg/cm2 and Test Pressure 78 kg/cm2) (As per R.A) |
| 45 | I/8(B):-200mmdia Reflux Valve:(Cast steel) Providing erecting 200mm dia Cast Steel (Cl-300)Cast Steel D/F Reflux Valves Single door with jointing to pipe work (including all hardware and packing) water works quality with jointing to pipe without bypass arrangement, with gun metal seat including inspection charges, transpor-tation upto departmental store, unloading, stacking excluding GST levied by GOI& GOM in all respect etc. completed but excluding C.C. foundation/ structural steel support etc comp.(As per R.A) |
| 46 | I/8(D):-250mmdia Reflux Valve:(Cast steel)Providing erecting 250mm dia Cast Steel (Cl-300)Cast Steel D/F Reflux Valves Single door with jointing to pipe work (including all hardware and packing) water works quality with jointing to pipe without bypass arrangement, with gun metal seat including inspection charges, transpor-tation upto departmental store, unloading, stacking excluding GST levied by GOI& GOM in all respect etc. completed but excluding C.C. foundation/ structural steel support etc comp.(As per R.A) |
| 47 | I/8 (E ):-100mm dia Kinetic DA Air Valve: Providing, erecting 100mm dia Kinetic Double Orifice Cast Steel Air Valves with an isolating SluiceValve mounted in horizontal position operated by wheel gear suitable for working pressure of Class 300 rating (52 kg/cm2) etc comp. |
| 48 | I/9(a):- M.S.Pipes & Specials:- Providing, erecting, jointing With test & trial of required size M.S.Pipes & Specials etc comp.(As per R.A) |
| 49 | I/9(b):- 200mm dia flanged Joints:- Providing, erecting, jointing With test & trial of 200mm dia flanged Joints with required material rubber packing & nut bolts etc comp.& as per detailed specifications etc comp.(As per R.A) |
| 50 | I/9 (C):-200mm dia Dismentalling joints:- Providing, erecting, jointing With test & trial of 200mm dia dismentallingJoints with required material etc comp.& as per detailed specifications etc comp.(As per R.A) |
| 51 | I/10:-Internal Electrification:- Providing, installing ,comm. With test & trial of Internal Electrification arrangement in jackwell pumping station including four point, two plug, flouroscent tube, CFL street light, with boards & switches ,Inverter & batteries etc. & as per detailed specifications etc comp.(As per R.A) |
| 52 | I/11:- Lifting equipement :- (Hand.operated) Providing , erecting and commissioning Single Girder 5.00 Tonnne Hand Operated Circular / Rectangular Travelling Crane with 6 m lift complete with chain pulley block ISI marked and travelling trolley both tested for 50 % overload including arrangement for longitudinal travel / circular travel and cross travel with wheel, hand chain, etc complete. Above 8 m upto 10 m span etc comp.(As per R.A) |
| 53 | I/12:-Tools:-Providing set of tools as per detailed specification & rate analysis & as per detailed specifications etc comp.(As per R.A) |
| 54 | I/13:-C.C.foundation:-Providing, installing ,comm. With test & trial of C.C.foundation block etc comp.(As per R.A) |
| 55 | I/14(A):- Full Bore Electromagneticflow meter:- Supply, install and commission 200mm dia.Electromagnetic Flow Meter (EMF) As Per ISO 4064, for Raw/Pure water with accuracy +/-0.5% of measured value & protection as per given specifications for size 100 mm-1000mm including sensor,transmitter surge arrestor, cable suitable size for 25 mtrs built in GSM ( with Simcard and its charges,valid for 36 months) including the pipe cutting, leveling and installation of flow meter in the pipelines with necessary tool tackles, cranes including 36 months guarantee etc complete, as may be required at site & based on technical specifications(Annexure-A) attached etc comp..(As per R.A.) |
| 56 | I/14(B): Mechanical Joints: Supply of C. I. Mechanical Compression Flanged / Socket Tailpiece200mm dia (Popularly known as I TM Flanged / Socket Tailpiece) suitable for making flanged connection with the plain barrel of C. I. Spun Pipes ( as per - IS -1536 /2001) and D. I. Pipes ( as per IS: 8329 / 2000).The Tailpiec to be supplied complete with sealing rubber gasket of S.B.R, C.I. Follower Glandsand M.S. Nut Bolts.The whole assembly should be mechanically and hydraulically tested to the provisions as laid down in IS:1538 /1993. The rates are inclusive of cost of material, freight charges, loading, transportation and unloading at departemental store, excluding GST levied by Gol and GoM in all respect, etc. complete as directed.(As Per RA) |
| 57 | I/14:-(C)Gas cutting to the200mm dia MS Pipes: Making Gas Cutting to the Pipes for installation of above flow meter etc comp. (As Per RA) |
| 58 | I/14:-(D) Cement Concrete Chamber for flow meter:Making Excavation 1.5X1.00X1.00mtr in soft & hard murum & constructing the Concrete chamber size 1.5*1.5*1.00mtr for installation of flow meter etc comp. (As perRA) |
| 59 | I/15:-External Electrification to the approach road to well 150mtr :- Providing, installing ,comm. With test & trial of External Electrification arrangement Treatment plant area,Sumpwell & Section office including Tubular pole=5 Nos , CC foundation=5 , FRP box=5Nos , LEDstreet light 75W=5Nos ,Arm.cable copper 4CX10Sqmm=200 mtr, Arm.cable copper 3CX2.5 Sqmm=40mtr, Anchor type DP=5Nos, Earthing arrangement =5 Nos , street light bracket =5Nos, Quartz electronic time switch= 1No. ,4 pole 40A Power contactor=1No, gate light fitting=2 Nos & LEDstreet light 75W=1Nosetc. & as per detailed specifications etc comp. (As per R.A) |
| 60 | Item No.16:-Test & Trial:- Giving satisfactory test and trial of pumping machinery for one month period etc comp. |
| 61 | I/17(A):-200KVA Transformer:-Supplying, installing, testing & commissioning 3 phase, 11/0.433 kV, 50 Hz., 200kVA, Mineral oil immersed and naturally cooled outdoor type, copper wound Non-sealed transformer delta / star connected with additional neutral brought out on load side, temperature rise should not exceed 45℃ by thermometer in oil and 50 ℃ by the resistance method in winding at full load rating, using type A winding insulation (kraft paper) with HV tapping (with off load tap changer)off load +2.5 to -5 in steps of 2.5%, having 4 number of tap positions, with standard accessories complete with test certificate with losses below 780 Watts at 50% load, 2300 Watts at 100% load as per IS:1180 (part 1) : 2014,with necessary permissions of Electrical Inspector, as per specification no SS- TRNSL(As per R.A) |
| 62 | I/17(B)11 KV A.B.Switch:- Supplying and erecting 11 kV outdoor type gang operated air break, triple pole switch 200 A capacity with 3 post pin type insulator per phase,mounted in horizontal or vertical position with necessary channels on provided cross arm with adequate length of \"C\" class G.l. pipe for operating handle erected on extended square shaft. The operating handle provided with lock and key at suitable height from ground level with necessary clamp.(As per R.A) |
| 63 | I/17(C ):11 KV D.O.Fuse:- Supplying and erecting, 11 kV outdoor type drop out fuse with insulator complete with fuse holders, fuse barrel with metal fitting, fuse element mounted on M.S. channel with working current of 15A capacity complete erected on provided cross arm.(As per R.A) |
| 64 | I/17(D ):- Earthing Arrangement :- Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover complete with all materials, testing & recording the results as per specification no. EA-EP (As per R.A) |
| 65 | REPAIRS WORK OF EXISTINGPUMP HOUSE AT ANNAPURNA RIVER. |
| 66 | Item No.1 :Providing and fixing 40mm diameter and1.5mm thick Stain less steel hand railing inS.S.304 Grade including fabricating, fixtures, errecting, necessary welding,grinding, finishing, buffing to stainless steel pipe etc. complete |
| 67 | Item No 2 :Providing and laying machine cu tmachine Polished Kota stone flooring 25mm to30 mm thick and required widthin plain/diamond pattern on bed of 1:6C.M.including cement float, filling joints withn eatcement slurry,curing,polishing and cleaning etc.complete. |
| 68 | Item No 3 : Providing internal cement plaster 12 mm thick in single coatin cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positionsincludingscaffoldingandcuringetc. complete. |
| 69 | Item No 4 : Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. |
| 70 | Item No.5 :Providing and applying external rain coat painting with crack filling acrylic polymer based chemical compound coating to the external surface of walls to prevent water see page in the masonry walls during monsoon added with required shade Steiner to give required shade to the surface in two coats. Including providing three coat of priming of polymer base primer including preparing surfaces crapping the existing loose old paint, removing loose particles of sand on the surface opening and cleaning the cracks developed in the external plaster, removing loose particles by chiseling, filling cracks by chemicals compound of approved make with proper penetration etc. Coating of Rain coat with the help of brush and as per instruction sand specification given by manufacturer and within struction fromEngineer in-charge. Work shall be executed by certified applicat or only and covering gurantee of 3 years on court stamp paper of Rs. 500/- and necessary testing etc. complete. |
| 71 | Rain Coat |
| 72 | Item No.6 :Removingdoors and windows with frames and stacking the materials asdirected with all leads, lifts etc. complete. |
| 73 | Item No.7Providing andfixing Country cut teak wood windows/ ventilators with double leaf panelled shutters 25mm thick without ventilators as per detailed drawing including stainlesssteel fixtures and fastening sandfinishingthe wood workwithoil painting3coats etc. complete. |
| 74 | Item No.8 : Providing and fixing single or double leaf panelled door shutter excludingframewithglazedopenable fanlightshutter35mm thick as per detailed drawing consisting panelled vertical styles100mmx35mm andlockandbottomrail 200mmx35 mm and panels 12 mm thick both side commercial ply faced particleboardincludingstainlesssteel fixtures and fastening and T.W.beading at junctions of panel insertsand asinstructedby the Engineer incharge including 3coat sofoilpainting etc. complete. |
| 75 | Item No.9 : Removing the existing cement plaster of any thickness without causing dust nuisance and stacking the debris up to a distance of 50 metre sor spreading in the compound and cleaning the site etc. complete. |
| 76 | Item No.10 :Providing and fixing M.S. chequerred plate flooring of following thickness supported onM.S. angles (25 x 25 x 5 mm size) including welding, cutting and fabricating the plates to the required square or rounding shape, making holes in the plate, including providing and applying 3 coats of anticorrosive paint, etc. complete as directed by Engineer-in-charge. |
| 77 | RepairstoRising mainFromJack well to MBR ( ESR )at Elayesada 273.10 mm dia O.D. 5.6 mm thick M.S. Pipe = 3950 rmt |
| 78 | tem No 1: DismantlingdeadpipelineofM.S./R.C.C./ C.I./ .S.C.andG.I./A.C./P.V.C./S.W./H.D.P.E. pipe including cost of necessary excavation and refilling of trenches, breakingthe joints,lifting the pipes and stacking to theplace as directed by Engineer-in-charge withall leads and lifts including cleaning thesurface, etc.complete. |
| 79 | 300 mm |
| 80 | Item No 2:Manufacturing,providing and supplying spirally welded/ERW /SAW /fabricated M.S.pipes (Commercial Quality)including procurements of plates, gas cutting to requried sizerolling, tack welding assembling in suitable lengths to formpipes, welding on automatic welding machine and forming‘V’edge on both ends of pipes including railway freight,insurance,unloading from railway wagon,loading in to truck, transport to stores,unloading,stacking excluding GST leviedby GOI & GOM in all respect,etc,complete as per IS-3589and IS-5504 as applicable as per specifications (No negativetolerance in thickness is permissible) |
| 81 | 273.10 mm O-D 5.60mm |
| 82 | Item No 3:Lowering, laying in position to correct line andlevel includingM.S.pipes with / without any outcoating onpedestals or chais upon prepared formation.The rate toinclude loading, unloading, hoisting,marginal cuttingwherever required, assemblingand tack welding, andtransportation upto 500 M.etc.completed as specified. |
| 83 | 5 mm to 8 mm thick above 250 mm ,500 mm dia |
| 84 | Item No 4: Lowering and laying inposition tocorrect line andlevelincludingM.S. specials such as distance pieces,straps,bends, tapers,etc.on pedestals or chairs upon piersor trestles.The rate to include loading,unloading,hoisting,marginal cutting wherever required, assembling and tackwelding, and including transportation upto 500m. etc. completeasspecified. |
| 85 | 5 mm to 8 mm thick upto500 mm Dia |
| 86 | Item No 5: Transporting within 500 meters ,laying in position to correct line and level M.S.pipes with/without any outcoating, on prepared bedding in trenches includingmarginalcuttingwherever required, assembling tackwelding thesame.The rate to include loading,unloading,hoisting,etc.complete as specified |
| 87 | 5 mm to 8 mm thick above 250 mm 273.10 mm 5.60 mm Thk. |
| 88 | Item No 6: Welding in all positions with required number of runs, for M. S. pipes internally and / or externally including gauging wherever necessary, fixing appurtenances and other accessories in connection with pipe laying work as per specification. |
| 89 | Butt joint plate thk 8mm |
| 90 | Item No 7:Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc.complete. |
| 91 | 250 mm Sluice valve - PN - 1.6 (Without by passarrangement) |
| 92 | 100 mm Dia Scoure . Valve PN 1.6 |
| 93 | Item No 8:-Providing and supplying ISI mark CID/Frefluxvalves (non-return valves ) of following dia including railway freight, inspection charges,unloading fromrailwaywagon, loading intotruck, transportationuptodepartmentalstores, unloading, stacking excluding GST levied byGOI &GO Min all respectetc.complete.RefluxvalvesasperI.S.5312PartI(1984) |
| 94 | 250 mm Dia.NR. Valve PN 1.6 with bye pass arrengement |
| 95 | Item No 9:-Providing and supplying C.I.D/F angle type spring loaded pressure relief valves ofapproved make and quality includinginspection charges, transportation todepartmental stores excluding GST leviedbyGOI &GOM in all respect etc.complete. |
| 96 | 150 mm Dia Pre. relief. Valve PN 1.6 |
| 97 | Item No 10:Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc.complete.(Rate forall class of valves.) |
| 98 | 250 mm Sluice valve - PN - 1.6 (Without by passarrangement) |
| 99 | 100 mm Dia Scoure . Valve PN 1.6 |
| 100 | 250 mm Dia.NR. Valve PN 1.6 with bye pass arrengement |
| 101 | 150 mm Dia Pre. relief. Valve PN 1.6 |
| 102 | Item No 11: Providing and fixing in position and jointinghigh performance C. I. Air valves for watercombination type ( Kinetic air valve along withautomatic air valves ) double ball, doubleorifice with stainless steel ball, tamper proof airvents rolling seal mechanism for air releaseand anti vacuum application designed for 16Kg. Per sq. cm. working pressure and testedfor 20 for kg per sq. cm. pressure. ( Rate toinclude cost of gaskets, bolt, nut and any othermaterial required for jointing and itstransportation etc. excluding GST levied byGOI & GOM in all respect. |
| 103 | C. I. ARV FLFF PN1.60 50 mm Dia |
| 104 | Item No13: Providing, fabricating and fixing expansion joints for pipelines as per the drawing. The rate to include machining the strakes and steel ring as shown in the drawing and welding on either automatic welding machine or manually, Rate includes plates and flats required for expansion joint and all other materials such as synthetic rubber, rubber ring, etc. including packing as per specifications, grease, bolts and nuts, local handling, excluding GST levied by GOI & GOM in all respect etc. complete. Expansion joints suitable for pipe diameters |
| 105 | 300mm Dia |
| 106 | Item No 14: Gas cutting (either square cut or V cut) pipes, plates, etc. of thickness. |
| 107 | i) Above5mm.Upto10mm. |
| 108 | Item No 15: Hydraulic testing of M.S. pipeline to specified pressure including cost of all materials and labour and waterfor testing forthe length upto 1km., using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary. |
| 109 | Upto600mm.dia.(I.D. |
| 110 | Item No 16: Providing and applying 100% Solids Polyurethane Coating meeting BIS16719 & Rigid, Directto Metal,100% Solids Polyurethane Coating meeting AWWA C-222 of minimum 1000 micron thickness on the external surface of MS Pipe afterblast cleaning to SA 2½ with Anchor profile of>75Microns using angular Steel Grit. Pipe blast cleaning and coating shall only bepermitted in the pipe manufacturer’s facility, preferably on rolling conveyor using fast set materials. The rates are including loading,unloading, handling and transportation of Pipe etc complete.(ExternalCoating to MS Pipe ) |
| 111 | 273.10 mm O-D 5.60mm thick M S pipe |
| 112 | Item No 17: Providing and applying 100% Solids Polyurethane Coating meeting BIS 16719 & Rigid, Directto Metal,100% Solids Polyurethane Coating meeting AWWA C-222 and satisfying the criterionfordrinking water as per WRAS-BS 6920 to a thickness of 500 Microns (SSPC PA2) on theinternal surface of MS Pipe afterblast cleaning to SA 2½ with Anchor Profile of >75 Microns Using angular Steel Grit.The Coating should meetTotal OrganicCarbon(TOC) as per APHAAW-WAWEF5310C < 2.00 milligram/ Litre.Pipe lining shall only be permitted in the pipe manufacturer’s facility. Site application shall not be permitted. The rates are including loading, unloading, handling and transportation of Pipe etccomplete.Internal Lining |
| 113 | 273.10 mm O-D 5.60 mm thick M S pipe( food grade epoxy ) |
| 114 | Item No 18:Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside excluding all statutory duties & taxes such as GST levied by GOI & GOM in all respect, inspection charges, transportation to stores site, and stacking, etc.complete. |
| 115 | Plain ended specials or plain ended branchflanged specials of all diameters. |
| 116 | Item No 19:Providing ISI mark G.I. pipe of following class and dia. excluding GST levied by GOI & GOM in all respect, inspection charges, transportation to stores, etc.complete as per IS-1239/2004. Note : One coupler shall be provided with each full length of pipe cost of which is included in rates below |
| 117 | 80mm.(10.30kg./m) |
| 118 | Item No 20:ProvidingConcreteandM-15/ layinginof trap / granite / quartzitegneiss metal for foundationbeddingincluding bailing out water, formwork, compaction, curing, etc. complete. (Cement5.90bags/cum |
| 119 | Item No 21:Providing and Concrete laying in of trap/ granite / quartzite / gneiss metal for RCC foundation foundation columns like and raft, grillage, footing and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc. complete. (By weigh batching and mix design for M250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement) M-200 |
| 120 | Item No 22:Providing and fixing in position steel bar reinforcement of various diameters for RCC piles, caps, footings, foundations, slabs, beams, columns, canopies, staircases, newels, chajjas, lintels,pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules;including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete(including cost of binding wire). |
| 121 | RepairstoGravity mainFrom MBR ( ESR )at Elayesada To GSR at Khakshi 273.10 mm dia 5.60 mm thickM.S. Pipe L= 4050 Rmt ( Total length of = 7282 Rmt .Gravity main ) |
| 122 | tem No 1: DismantlingdeadpipelineofM.S./R.C.C./ C.I./ .S.C.andG.I./A.C./P.V.C./S.W./H.D.P.E. pipe including cost of necessary excavation and refilling of trenches, breakingthe joints,lifting the pipes and stacking to theplace as directed by Engineer-in-charge withall leads and lifts including cleaning thesurface, etc.complete. |
| 123 | 300 mm |
| 124 | Item No 2:Manufacturing,providing and supplying spirally welded/ERW /SAW /fabricated M.S.pipes (Commercial Quality)including procurements of plates, gas cutting to requried sizerolling, tack welding assembling in suitable lengths to formpipes, welding on automatic welding machine and forming‘V’edge on both ends of pipes including railway freight,insurance,unloading from railway wagon,loading in to truck, transport to stores,unloading,stacking excluding GST leviedby GOI & GOM in all respect,etc,complete as per IS-3589and IS-5504 as applicable as per specifications (No negativetolerance in thickness is permissible) |
| 125 | 273.10 mm O-D 7.8mm |
| 126 | Item No 3:Lowering, laying in position to correct line andlevel includingM.S.pipes with / without any outcoating onpedestals or chais upon prepared formation.The rate toinclude loading, unloading, hoisting,marginal cuttingwherever required, assemblingand tack welding, andtransportation upto 500 M.etc.completed as specified. |
| 127 | 5 mm to 8 mm thick above 250 mm ,500 mm dia |
| 128 | Item No 4: Lowering and laying inposition tocorrect line andlevelincludingM.S. specials such as distance pieces,straps,bends, tapers,etc.on pedestals or chairs upon piersor trestles.The rate to include loading,unloading,hoisting,marginal cutting wherever required, assembling and tackwelding, and including transportation upto 500m. etc. completeasspecified. |
| 129 | 5 mm to 8 mm thick upto500 mm Dia |
| 130 | Item No 5: Transporting within 500 meters ,laying in position to correct line and level M.S.pipes with/without any outcoating, on prepared bedding in trenches includingmarginalcuttingwherever required, assembling tackwelding thesame.The rate to include loading,unloading,hoisting,etc.complete as specified |
| 131 | 5 mm to 8 mm thick above 250 mm 273.10 mm 5.60 mm Thk. |
| 132 | Item No 6: Welding in all positions with required number of runs, for M. S. pipes internally and / or externally including gauging wherever necessary, fixing appurtenances and other accessories in connection with pipe laying work as per specification. |
| 133 | Butt joint plate thk 8mm |
| 134 | Item No 7:Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc.complete. |
| 135 | 100 mm Dia Scoure . Valve PN 1.6 |
| 136 | Item No 8:-Providing and supplying ISI mark CID/Frefluxvalves (non-return valves ) of following dia including railway freight, inspection charges,unloading fromrailwaywagon, loading intotruck, transportationuptodepartmentalstores, unloading, stacking excluding GST levied byGOI &GO Min all respectetc.complete.RefluxvalvesasperI.S.5312PartI(1984) |
| 137 | 250 mm Dia.NR. Valve PN 1.6 with bye pass arrengement |
| 138 | Item No 10:Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc.complete.(Rate forall class of valves.) |
| 139 | 250 mm Sluice valve - PN - 1.6 (Without by passarrangement) |
| 140 | 100 mm Dia Scoure . Valve PN 1.6 |
| 141 | Item No 11: Providing and fixing in position and jointinghigh performance C. I. Air valves for watercombination type ( Kinetic air valve along withautomatic air valves ) double ball, doubleorifice with stainless steel ball, tamper proof airvents rolling seal mechanism for air releaseand anti vacuum application designed for 16Kg. Per sq. cm. working pressure and testedfor 20 for kg per sq. cm. pressure. ( Rate toinclude cost of gaskets, bolt, nut and any othermaterial required for jointing and itstransportation etc. excluding GST levied byGOI & GOM in all respect. |
| 142 | C. I. ARV FLFF PN1.60 50 mm Dia |
| 143 | Item No 11: Lowering, laying and fixing in proper alignment and position all types of C.I. air valves as directed by Engineer-in-charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc. complete. (for all class of valves). |
| 144 | 80 mm Air Valve Double Ball Flanged Type - PN - 1.6 |
| 145 | Item No13: Providing, fabricating and fixing expansion joints for pipelines as per the drawing. The rate to include machining the strakes and steel ring as shown in the drawing and welding on either automatic welding machine or manually, Rate includes plates and flats required for expansion joint and all other materials such as synthetic rubber, rubber ring, etc. including packing as per specifications, grease, bolts and nuts, local handling, excluding GST levied by GOI & GOM in all respect etc. complete. Expansion joints suitable for pipe diameters |
| 146 | 300mm Dia |
| 147 | Item No 14: Gas cutting (either square cut or V cut) pipes, plates, etc. of thickness. |
| 148 | i) Above5mm.Upto10mm. |
| 149 | Item No 15: Hydraulic testing of M.S. pipeline to specified pressure including cost of all materials and labour and waterfor testing forthe length upto 1km., using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary. |
| 150 | Upto600mm.dia.(I.D. |
| 151 | Item No 15: Providing and applying primerof iron paint externallyandonecoatofredoxideto blast cleaned surface of thepipes. |
| 152 | Item No 16: Providing and applying 100% Solids Polyurethane Coating meeting BIS16719 & Rigid, Directto Metal,100% Solids Polyurethane Coating meeting AWWA C-222 of minimum 1000 micron thickness on the external surface of MS Pipe afterblast cleaning to SA 2½ with Anchor profile of>75Microns using angular Steel Grit. Pipe blast cleaning and coating shall only bepermitted in the pipe manufacturer’s facility, preferably on rolling conveyor using fast set materials. The rates are including loading,unloading, handling and transportation of Pipe etc complete.(ExternalCoating to MS Pipe ) |
| 153 | 273.10 mm O-D 5.60mm thick M S pipe |
| 154 | Item No 17: Providing and applying 100% Solids Polyurethane Coating meeting BIS 16719 & Rigid, Directto Metal,100% Solids Polyurethane Coating meeting AWWA C-222 and satisfying the criterionfordrinking water as per WRAS-BS 6920 to a thickness of 500 Microns (SSPC PA2) on theinternal surface of MS Pipe afterblast cleaning to SA 2½ with Anchor Profile of >75 Microns Using angular Steel Grit.The Coating should meetTotal OrganicCarbon(TOC) as per APHAAW-WAWEF5310C < 2.00 milligram/ Litre.Pipe lining shall only be permitted in the pipe manufacturer’s facility. Site application shall not be permitted. The rates are including loading, unloading, handling and transportation of Pipe etccomplete.Internal Lining |
| 155 | 273.10 mm O-D 5.60 mm thick M S pipe( food grade epoxy ) |
| 156 | Item No 18:Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside excluding all statutory duties & taxes such as GST levied by GOI & GOM in all respect, inspection charges, transportation to stores site, and stacking, etc.complete. |
| 157 | Plain ended specials or plain ended branchflanged specials of all diameters. |
| 158 | Item No 19:Providing ISI mark G.I. pipe of following class and dia. excluding GST levied by GOI & GOM in all respect, inspection charges, transportation to stores, etc.complete as per IS-1239/2004. Note : One coupler shall be provided with each full length of pipe cost of which is included in rates below |
| 159 | 80mm.(10.30kg./m) |
| 160 | Item No 20:ProvidingConcreteandM-15/ layinginof trap / granite / quartzitegneiss metal for foundationbeddingincluding bailing out water, formwork, compaction, curing, etc. complete. (Cement5.90bags/cum |
| 161 | Item No 21:Providing and Concrete laying in of trap/ granite / quartzite / gneiss metal for RCC foundation foundation columns like and raft, grillage, footing and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc. complete. (By weigh batching and mix design for M250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement) M-200 |
| 162 | Item No 22:Providing and fixing in position steel bar reinforcement of various diameters for RCC piles, caps, footings, foundations, slabs, beams, columns, canopies, staircases, newels, chajjas, lintels,pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules;including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete(including cost of binding wire). |
| 163 | Item No 23:Transporting of dismentaled MS pipe to Devgad jamsande Nagarpanchayat store @ 10 Km |
| 164 | Repairs & Repalcing Existing PWGMof A.C. Pipe from Lad Dukan to Chandraprabha Cloth Traders & Gogate Bag to Khakshi Tithaof Dia to 160 mmD.I. K-7 Pipes. L=500 Rmt |
| 165 | Item No- 1:- Providing D.I. pipes (push on joints pressure pipes of D. I. of following class and diameters confirming to the I. S. pecificationinclusive cost of jointing materials (Rubber gasket of EPDM Quality ) excluding GST levied by GOI & GOM in all respect including Third party inspection charges of TPI Agency approved by MJP including Transit insurance, Railway Freight, Unloading from railway wagon, Loading into Truck, ransportation to departmental store, unloading,stacking etc. completed as directed by Engineer in charges (IS 1536/2001 for pipes andIS 158/1969and IS 12820/1989 or latest edition/revision with amendments for Rubber Gaskets. |
| 166 | 150 mm Dia D.I. K-7 |
| 167 | Item No- 2:-Providing and supplying D.I. fitting with ISI mark socket push on joints or flanged joints confirming to table 12 to 31 of IS 9523/2000 upto latest amendments including cost of SBR/EDPM tyton rings. Fittings should be with internally ordinary portland cement mortor lined and externally metallic zinc coating/zinc rich paint with finishing layer of black bitumen coating including transportation upto store excluding GST levied by GOI & GOM in all respect etc. complete.150 mm dia MJ Collor Coupling |
| 168 | Item No. 3:- Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per testressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading,stacking excluding GST levied by GOI & GOM in all respect etc. complete. PN-1 |
| 169 | 150 mm dia SLuice Valve PN-1.00 |
| 170 | Item No- 4:- Providing and supplying Air Valves as per IS-14845-2000 and MJP’s standard Specifications of approved make and quality of following diameters including railway freight, inspection charges, unloading from railway wagons, loading into truck, transportation upto departmental stores, unloding and stacking excluding GST levied by GOI & GOM in all respect etc. complete. |
| 171 | 50mm Dia Double ball Air Valve |
| 172 | Item No5 :- Excavation for foundation / pipe trenches inearth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering,preparing the bed for foundation and excluding backfilling, etc. complete. |
| 173 | Item No- 7 :- Lowering laying and jointing with SBR ruber gaskets C.I. S/S pipes of various classes with CI / MS specials of following diameter in proper position, grade and alignment as directed by Engineer-in-charge including conveyance of material from stores to site of work, including cost of jointing materials and rubber rings labour etc. complete. |
| 174 | 150 mm Dia D.I. K-7 |
| 175 | Item No- 8 :- Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete.( PN-1) |
| 176 | 150 mm dia SLuice Valve PN-1.00 |
| 177 | Item No- 9-Lowering, laying and fixing in proper alignment and position all types of C.I. air valves as directed by Engineer-in-charge including cost of conveyance from stores to site of work,cost of all material and giving satisfactory hydraulic testing, etc. complete. (for all class of valves). |
| 178 | 50mm Dia Single ball Air Valve PN-1.00 |
| 179 | Item No- 10:- Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level.M15 for PCC |
| 180 | Item No- 11:- Providing and fixing C.I. road box including loading, unloading and carting to site of work including all necessary excavation in all types of strata and fixing in murum packing, etc.complete. 225 mm x 300 mm (40 kg) |
| 181 | Item No- 12 :- Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation 15cm to 20cm layers including watering and compaction etc.complete |
| 182 | Item No- 13 :- Refilling the trenches with available excavated stuff with soft materials first over pipeline and then hard material in 15 cm layers with all leads and lift including consolidation, surcharging, etc. complete. Compaction should be at least 95% of M.D.D. |
| 183 | Item No- 14 :- Providing ISI standard R.C.C. pipes in standard lengths of following class and diameter suitable for either collar joints or rubber ring joints, excluding GST levied by GOI & GOM in all respect including inspection charges, transport to departmental stores, unloading and stacking etc. complete as per IS-458/1988.300 mm Dia RCC NP3 Pipe Class 2.00 m. length |
| 184 | Item No- 15 :- Lowering, laying and jointing in proper grade and alignment R.C.C. pipes with collar joints in C.M.1:1 roportion or socketed R.C.C. pipes with rubber joints (excluding cost of rubber ring or R.C.C. collar,) including cost ofconveyance fromstores to site of work, cost of jointing material, labour, etc. omplete as directed by Engineerin-charge |
| 185 | 300 mm Dia RCC NP3 Pipe |
| 186 | Item No- 16 :- providing and fixing in position M.S. Air valve boxes fabricated with 2 mm thick M.S. plate, 30 x 30 x 3 mm size M.S. angle frame, concreting in M-150 for fixing the box in position,applying two coats of oil paint, painting chainage, locking arrangement, etc.complete as directed by Engineer-in-charge. |
| 187 | For double ball air valve |
| 188 | Item No- 17 :- Hydraulic testing of C.I./D.I. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating typeumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position using water supplied by the contractor. |
| 189 | 150 mm dia D.I. K-7 |
| 190 | Item No- 18 :- Provision for Road Crossing Permission Road Crossing Devgad Nippani State Highway Road restoration Charges as per G.R. Govt. of Maharashtra.PWD Dept. Gov. Resolution No. OFC-2012/F.No. 201/ road-7 dt. 7/04/2014 |
| 191 | Through Side shoulder |
| 192 | Item No-19:-Providing and fixing in position M.S. ladder 0.50 M wide consisting of 75 x 10 mm M.S. flats as stringers and 16 mm dia M.S. bars indouble rows as steps placed at 25 cm c/c including cost of material and labour involved, welding, anchoring and applying 3 coats of anticorrosive paint, etc. complete as directed by Engineer-incharge. |
| 193 | For GSR @hi Titha |
| 194 | Reapirs to Existing ESRat Elayesada & ESR at MJP Office. |
| 195 | Providing double flange sluice valve confirming for IS 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. |
| 196 | Sluice valve 150 mm dia |
| 197 | Sluice valve 100 mm dia |
| 198 | Desilting the Supply Well, Intake Well / Head Works, Sump of water supply / sewerage works etc. in wet or dry condition including lifts upto 9 M and lead upto 150 M as required beyond the work site, stacking, spreading, including necessary guarding, etc. complete, as directed by Engineer-in-charge. |
| 199 | Removing the existing cement plaster of any thickness without causing dust nuisance and stacking the debris up to a distance of 50 metre sor spreading in the compound and cleaning the site etc. complete. |
| 200 | Providing water proofing treatment of 12mm average thickness consisting of 12mm thick layer in cement mortar 1:3 with water proofing compound at the rate of one kilograme per bag of cement as base,constructing and laying brick bat coba in cement mortar 1:5 with waterproofing compound at the rate of one kilograme per bag of cement and having average thichness of 80mm and finishing with 20mm cement plaster layer in cement mortar 1:3 with approved ware proofing compound at the rate of one kilograme per bag of cement,including all lead,lifts and laid to proper slope to drain off water entirely including watta at the junction of parapet and work upto a height of 30cm or as directed and including finishing the top layer of ware proofing treament with false marking of 30 x30cm or as directed and covering the whole treatment with seven year guarantee on requisite stamp paperetc. complete. |
| 201 | Providing and fixing in position M.S. ladder 0.50 M wide consisting of 75 x 10 mm M.S. flats as stringers and 16 mm dia M.S. bars in double rows as steps placed at 25 cm c/c including cost of material and labour involved, welding, anchoring and applying 3 coats of anticorrosive paint, etc. complete as directed by Engineer-incharge. |
| 202 | Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.) |
| 203 | Sluice valve 150 mm dia |
| 204 | Sluice valve 100 mm dia |
| 205 | Providing and supplying ISI standard CI double flanged pipes excluding GST levied by GOI & GOM in all respect including railway freight, insurance, unloading from railway wagon, loading into truck transport to stores,unloading etc. complete as directed by Engineer-in-charge. |
| 206 | 150 mm |
| 207 | 200 mm |
| 208 | Erecting and hoisting in position and jointing, testing M.S./ C.I. D/F pipes and specials in vertical position including cost of all jointing materials (rubber packing, nut bolts,etc.) labour, scaffolding, hydraulic testing etc. complete. |
| 209 | 150 mm |
| 210 | 200 mm |
| 211 | Providing and supplying ISI standard CI flanged / S& S specials excluding GST levied by GOI & GOM in all respect including railway freight, insurance, unloading from railway wagon, loading into truck transport to departmental store, unloading stacking etc. complete. |
| 212 | 80 mm to 300 mm D/F Specials |
| 213 | Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6proportion PCC bedding, excluding excavation, B.B. masonry in C.M. 1:5 Proportion, 20mm thick cement plaster in CM 1:4 proportion on both side,precast RCC frame and cover, etc. complete as directed by Engineer-in-charge.(Note : Wall thickness : 0.23 M for depth of 1.2 M and 0.35 M for balance depth exceeding 1.2 M ) |
| 214 | 0.9 X 0.9 M internal size and depth upto 1.2 M with precast R.C.C. slab cover. |
| 215 | Providing and applying external rain coat painting with crack filling acrylic polymer based chemical compound coating to the external surface of walls to prevent water see page in the masonry walls during monsoon added with required shade Steiner to give required shade to the surface in two coats. Including providing three coat of priming of polymer base primer including preparing surfaces crapping the existing loose old paint, removing loose particles of sand on the surface opening and cleaning the cracks developed in the external plaster, removing loose particles by chiseling, filling cracks by chemicals compound of approved make with proper penetration etc. Coating of Rain coat with the help of brush and as per instruction sand specification given by manufacturer and within struction fromEngineer in-charge. Work shall be executed by certified applicat or only and covering gurantee of 3 years on court stamp paper of Rs. 500/- and necessary testing etc. complete. |
| 216 | Providing and fixing water level indicator upto 5 M height including M.S. enamelled gauge plate 300 mm wide and 3 mm thick, copper float, providing and fixing required accessories such as pointer, pulleys, nylon thread including cost of all material, labour, etc. complete. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
