Tender For Erection Of 11 Kv Line 31.5 Km And 11/0.4 Kv Ub Station For Releasing Of 125 Nos Agriculture Connection Under (O&M) Sub Division Aau Under Phalodi Circle Including Transportation Of Material From S/D Store To Siteon Labour Rate Basis-2022., Jodhpur-Rajasthan

tender for Erection of 11 KV line 31.5 Km and 11/0.4 KV ub Station for Releasing of 125 Nos Agriculture Connection under (O&M) Sub Division Aau under Phalodi Circle including transportation of Material from S/D Store to siteon Labour rate basis-2022. Sl. No. Item Description 1 Erection of 11 KV line 31.5 Km and 11/0.4 KV ub Station for Releasing of 125 Nos Agriculture Connection under (O&M) Sub Division Aau under Phalodi Circle including transportation of Material from S/D Store to siteon Labour rate basis-2022 2 Conducting route survey as per approved route map and pegging of route with tee off point section point & double pole locations. 3 Excavation of pit in soil (ordinary) to erect various supports and stay sets including stacking of excavated soil from the edgeof excavation.(15 % extra shall be payble for the designated desert area panchayat samities of Jodhpur Discom in pursuance to JdVVNL order No. 1240 dt. 18.07.13) 4 (A) Height of poles/R.S.Joist/M.S. Rail Size of pit 5 9 Mtr/ 1.2mx0.6mx1.50 m deep 6 (C)Stay set/Depth of pit 7 6x 5/8 -0.75x0.5x1.35 m 8 Excavation of pit in Hard Soil 9 (A) Height of poles/R.S.Joist/M.S. Rail Size of pit 10 9 Mtr/ 1.2mx0.6mx1.50 m deep 11 (C)Stay set/Depth of pit 12 6x 5/8 -0.75x0.5x1.35 m 13 Excavation of pit in ordinary rock which does not require blasting/murrad (In Jodhpur Discom)to erect various supports and stay sets including stacking of excavated muck from the edge of excavation/pit. 14 (A) Height of poles/R.S.Joist/M.S. Rail /Size of pit 15 9 Mtr/ 1.2mx0.6mx1.50 m deep 16 (C)Stay set/Depth of pit 17 6x 5/8 -0.75x0.5x1.35 m 18 Excavation of pit in Hard rock ( Where blasting is required)to erect various supports and stay sets including stacking of excavated muckfrom the edge of excavation/pit. 19 (A) Height of poles/R.S.Joist/M.S. Rail /Size of pit 20 9 Mtr/ 1.2mx0.6mx1.50 m deep 21 (C)Stay set/Depth of pit 22 6x 5/8 -0.75x0.5x1.35 m 23 Safe carriage of PCC poles including loading / un-loading 24 c) 9 Mtr.long 200 Kg. PCC pole 25 within10 Kms. 26 Above 10 Km. & upto 30 Km. add foreach Km. or part thereof 27 Safe carriage of steel( fabricated and unfabricated) I.e.M.S. Rails, R.S.Joists, M.S.Channels, M.S.Angles, M.S.Flat, G.I.Stay Sets, G.I. Stay Wire, G.I.Wire Nut & Bolts etc. and ACSR Conductor including loading and unloading and stacking in Nigam store /at work site 28 Within10 Kms. 29 Above 10 Kms. & upto 30 Kms. Add for each Km.or part thereof. 30 Safe Carriage of insulator, hardware, cable etc.including loading/unloading and stacking in Nigam.stores etc. 31 Within10 Kms. 32 Above 10 Kms. & upto 30 Kms. Add for each Km.or part thereof. 33 Safe carriage of 11/.4 KV 3 Phase distribution transformer including loading/unloading.from store to site (These charges will be 1.5 times for both sides ) 34 b)25 & 40 KVA 35 Within10 Kms. 36 Above 10 Kms. & upto 30 Kms Add for each Km.or part thereof. 37 c)Above 40 KVA & upto 100 KVA 38 Within10 Kms. 39 Above 10 Kms. & upto 30 Kms. Add for each Km.or part thereof. 40 Erection of PCC poles in excavated pit with fixing of brackets,cross arms & top hampers as required in alignment after checking the same with plumb line. The support is to be back filled with soil with proper ramming. The nuts & bolts are to be provided by the contractor as per Nigams specification for which the payment will be made at the prevailing Discom store issue rates. 41 (B) IN RURAL AREA 42 PCC Poles 9 Mtr. Long(200Kg.) 43 Erection &assembly of 2 Pole structures of steel supports or PCC poles in excavated pit in alignment after checking the same with plumb line.Including fixing of complete steel structure for line D.P.The support is to be back filled with soil with proper ramming.The nuts &bolts are to be provided by the contractor as per Nigams specfication for which the payment will be made at the prevailing Discom store issue rates. 44 PCC Poles 9 Mtr. Long(200 Kg.) 45 Erection & fixing of G.I.Stay sets with anchor plates in excavated pit in required position and back filling with soil with proper ramming.The work includes fixing of stay clamps.Stay insulator with stay wire at both ends with proper tension.Size of stay set/stay wire 46 6x5/8 with 7/10 SWG stay wire 47 Fixing and assembly of disc.point channel pair with pilot plates top hampers & clamps on erected single polestructure as per design. The nuts &bolts are to be provided by the contractor as per Nigams specification for whichpayment will be made as per prevailing Discom store issue rates, 48 11 KV line 49 Fixing of 11kv B&S/T&C type disc insulator of 11kv lines(each unit consiting of 1nos.disc.& 1set of H/ W ) on terminal point including fixing of hardware and strips. 50 Fixing of 11 KV pininsulator with pins. 51 Assembly and installation of Horn Gap fuse set (set of 3nos)on erected structure as per design, complete in all respectwith post insulator includingjumperingonbothendsforconnection with the system. The nuts & bolts will be supplied by the contractorfor which payment will be made as per prevailing Discom store issue rates. 52 11kv Horn Gap fuse set. 53 Installation testing as per Nigams norm & commissioning of 11/0.4KV distribution transformer on erected supports including fixing of steel structure set for sub-station as per requirment jumpering on HV&LV side, crimping of lugs/ clamping earth connections of body and neutral of transformer with wire /strip (as already provided with earthing ) complete in all respect. The PG clamps nuts & bolts will be supplied by the contractorforwhich payment will be made as perprevailing Discom store issue rates, 54 25 and 40 KVA 55 Above 40 KVA & up to 100 KVA 56 Laying ,jointing , stringing, tensioning and clamping of conductor with proper sag as directed , using bolted type hardware including binding on pin insulators,jumpering on section points with binding wire / P.G.clamps.Aluminium jointing sleeves will be used for jointing the conductor.The line must stand at proper voltage on charging.The contractor will be provide P.G.clamps for which payment will be made as per prevailing Discom issue rate. 57 (B) IN RURAL AREA 58 ACSR WEASEL 59 Three nos. Earthing of each 11/0.4 KV distribution transformer /sub-station with M.S.Rod 20mm dia 3 meter long and driving them into earth by mechanical means at a distance as per approved design & drawing & specification.The work includes flattening of top ends of M.S.rod drilling a hole of 9/16 dia.at flattened top and tightening of M.S.flat 50x6mm/25x3mm/(having 3 hole 2ends and 1mm middle) with nuts and bolts with M.S.rods top end hole.The flat will also be welded with M.S.rod.The end will be connected to equipments as under in sequence. 60 Fabrication of steel structures of M.S angle ,M.S.channel & M.S.Flat including cutting ,drilling and continunous welding joint as per design and drawing. 61 Other steel items 62 Making connection & fixing of LTCT Meter / Whole current Meter 63 Making connection & fixing of 3 nos LTCTs 64 Fixing of MCCB in M&P box including clamping and making cable connection. NOTE: The fixing of three phase MCCB (being supplied by Nigam) at centre of bottom of M&P box wil be done as per direction of concern ACOS. 65 Single core PVC copper cable 35.0 sq. Mm for 40 KVA three phasedistribution transformer (Max. Length Limited to 6.0 meter only and cable will be supplied by contractor) 66 35.0 Sq. Mm Ring type copper lug (Max. Qty. Limited to 12 nos. and Lugs will be supplied by contractor) 67 Single core PVC copper cable 50.0 sq. Mm for 63 KVA three phasedistribution transformer (Max. Length Limited to 6.0 meter only and cable will be supplied by contractor) 68 50.0 Sq. Mm Ring type copper lug (Max. Qty. Limited to 12 nos. and Lugs will be supplied by contractor) 69 M.S. Nut & Bolts 70 Note-1.Dismentaling, if any: Dismentaling charges for all the items will be 60% of item rates of erection charges. However, charges for transportation of the material from works site in the Nigam/sub division store shall be paid as item rate of that material(Chapter-III, Transportation of material). The payment will be made after issuance of certificate by Engineer In Chargethat all the dismentaled material has been safely received in theNigam/sub division storeNote-2. The nut & bolts will be provided/supplied by the contractor which will confirm to relevant ISS & payment will be made as per prevailing Discom store issue rate.Note-3. The quality of material supplied by the contractor be got checked & approved by the circle SE. Note-4. In case of pole upper end of the GI wire provided for earthing shall be bolted with cross arm.Note-5. The qty mentioned for normal soil/ordinary rock. Hard soil which does not required drilling and Hard Rock/ CC road which required drilling are tentative & shall be payble as per actual site condition and due verification by Engineer In Charge.Note-6. Safe Carriage of PCC poles/other material including Loading/un-loadingas per actual distance ofwork-site from place of lifting & shall be payble as per actual distance and due verification by Engineer In Charge. Note-7. Unit rates are inclusive of GST and shall be paidif applicable.Note-8. The work should be carried out as per specification and standard measurement of Jodhpur Discom.

INR 2950 /-

INR 49776.0 /-

INR 24.88 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB