Tender For Turn Key Solution For Agriculture Engineering Lab Equipments , Turnkey Solution For Agriculture Engineering Lab Equipments - (A) Farm Machinery Laboratory S/N Name of the item Qty. Unit 1. Cultivator with machine 1 Nos 2. Rotavator and Disc Plough 1 Lot 3. Reaper Machine 1 Nos 4. Seed Planter 1 Nos 5. Seed Cum Fertilizer Drill 1 Nos 6. Field monitoring and recording device 1 Nos Item No: 1 Cultivator with Machine S/N Technical specification 1) Rated Power: 3.4 kW (4.5 hp) minimum or better 2) Displacement: minimum 180cc or better 3) SFC minimum: ≤ 300g/kWh 4) Speed: 3000 RPM minimum or better 5) Number of gears: 2 Forward, 1 Reverse 6) Cultivation Width: 80 - 85 cm 7) Cultivator Depth: 5 – 6 inches 8) Engine: minimum 4 stroke 9) Fuel type: petrol 10) Fuel tank Capacity: minimum 3 L 11) Fuel consumption: minimum 1 L/hr. 12) Should be able use in tilling, breaking up soil clods, weeding, etc. 13) Must come with the machine for it to be used. 14) The bidder must have to provide a duly sealed and signed compliance document on it’s own letterhead for the technical bid qualification. Item No: 2 Rotavator and Disc Plough S/N Technical Specifications 1) Should have provide 1x Rotavator, and 1x Disc Plough 2) Engine rated power: 1.5 HP or better 3) Displacement: minimum 40 cc or better 4) Weeder width: 20 cm 5) Weeder depth: 5 cm 6) Engine: minimum 2 stroke or better 7) Engine type: petrol 8) Fuel tank capacity: 1 Ltr 9) Speed: 2500 RPM 10) Should be able to break the soil for planting, pulverizing it, and aerating it. 11) Should be used for braking up, turning over and mixing the soil during primary tillage. 12) The bidder must have to provide a duly sealed and signed compliance document on it’s own letterhead for the technical bid qualification. Item No: 3 Reaper Machine S/N Technical Specifications 1) Rated Power: 3.4 kW (4.5 hp) minimum or better 2) Displacement: minimum 180 cc or better 3) SFC minimum: ≤ 300g/kWh 4) Speed: 3000 RPM minimum or better 5) Productivity: minimum 3-5 hr/ha 6) Cutting Width: minimum 1000 mm or better 7) Cutting Height: minimum 50 mm or better 8) Engine: minimum 4 stroke or better 9) Fuel type: petrol 10) Fuel tank Capacity: minimum 3 Ltr 11) Fuel consumption: minimum 1 L/hr. 12) Suitable for crops like Green Gram, Black Gram, Bengal Gram, Soybean, Horse gram, Rajma, Barseem, Lucern, Papermint, Cumin, etc. 13) Should be able to harvest crops 14) Should be able to cut and gather grain stalks 15) The bidder must have to provide a duly sealed and signed compliance document on it’s own letterhead for the technical bid qualification. Item No: 4 Seed Planter S/N Technical Specifications 1) Type: manual seed planter 2) Seed topography: Plain, mountainous land, hill, etc. 3) Hole Seeding Rate : 1-2 adjustable 4) Functions: seed planting 5) Material: Plastic 6) Seeding Depth : 30mm/40mm 7) Seed Space : 6 inch -8 inch (adjustable) 8) Mouth Number : 6/7/8 (adjustable) 9) Seed Box Capacity : 3.5 kg 10) No of Row planting : 1 11) Suitable Seeds : Maize, bean, peanut, cotton, seed, etc. 12) Weight: 8 kg minimum. 13) Should be able to plant seeds efficiently and ensure proper spacing 14) Should be able to plant seeds accurately and place seeds in the soil 15) The nozzle of the seed planter should be long enough to achieve proper dept. for the seed in the soil. 16) The bidder must have to provide a duly sealed and signed compliance document on it’s own letterhead for the technical bid qualification. Item No: 5 Seed Cum Fertilizer Drill S/N Technical Specifications 1) Type : Manual Seeder cum Fertilizer 2) Barrel type : Double Barrel or better 3) Material : Plastic or better 4) Opera table by 1 person only 5) Height : 25 inches or better 6) Width : 5 inches or better 7) Weight : 1.5 kg minimum or better 8) Suitable for : Planting Dry Seeds like Sunflower, Watermelon & Pumpkin Etc 9) Suitable seed size: 3 to 8 mm 10) Seed depth: 2 to 4 cm 11) Seed Capacity: 500 gm to 1 kg 12) Should be able to perform seed sowing and fertilizer simultaneously 13) Should help in the germination rates and maximize crop yield 14) The bidder must have to provide a duly sealed and signed compliance document on it’s own letterhead for the technical bid qualification. Item No: 6 Field monitoring and recording device S/N Technical Specifications 1) Experiments monitoring device should have capacity to record the real time video in 1080P resolution 2) The device should have built in microphone 3) The device should have built in storage of minimum 32 GB 4) The device should have Wi-Fi (802.11 b/g/n) 5) The device should have a white flashlight support 6) The device should have a battery of minimum 3000 mAh. 7) The bidder must have to provide a duly sealed and signed compliance document on OEM’s own letterhead for the technical bid qualification. The bid specific oem authorization is must for the technical and post sales service support of the oem. (B) Soil and Water Technology Laboratory S/N Name of the item Qty. Unit 1. Rain gauge 1 Nos 2. Sun-Shine Recorder 2 Nos 3. Water Current Meter 1 Nos 4. Dumpy Meter 1 Nos 5. Pyranometer 1 Nos 6. Digital Anemometer 1 Nos 7. Wet Bulb and dry bulb thermometer 1 Nos 8. Digital planimeter 4 Nos 9. TLC 1 Nos 10. Advanced Soil-water potential cloud supported smart sensor 2 Nos 11. Smart Vapor pressure, humidity, temperature and air pressure with cloud connectivity support 1 Nos 12. Advanced cloud enabled Weather Station sensor 1 Nos 13. Smart Conductivity, water content and soil temperature cloud connectable enabled sensor 2 Nos 14. Advanced cloud connectivity enabled smart luminosity sensor 1 Nos Item No: 1 Rain Gauge S/N Technical Specifications 1. The rain gauge should have galvanized rain gauge x 1 2. The rain gauge should have plastic measure x 1 3. Heavy gauge SWG 27 or 0.4 mm 4. Recording range 10 mm 5. Rim diameter 80 mm 6. Measure how much rain has fallen in a certain area. 7. Easy to operate using with some single steps. 8. It should have proper indication of rain water level. 9. Should have tipping bucket 10. The bidder must have to provide a duly sealed and signed compliance document on it’s own letterhead for the technical bid qualification. Item No: 2 Sun Shine Recorder S/N Technical Specifications 1. Should have range of 0 to 10 hrs 2. Should have accuracy of ± 2 minutes 3. Thickness 0.3 mm - 0.4 mm 4. The length of recorder is minimum 8 cm 5. Measure the duration of bright sunshine at a specific location. 6. Should provide data used in study of agricultural activities. 7. Should be useful in the understanding of weather pattern and climate. 8. The bidder must have to provide a duly sealed and signed compliance document on it’s own letterhead for the technical bid qualification. Item No: 3 Water Current meter S/N Technical Specifications 1. Should have 4-6 cups mounted on a vertical shaft 2. Should have accessory screw driver x 2 unit 3. Suspension flat of minimum 15 cm long 4. Suspension rod 80 cm long 5. Wire rope 5 meter 6. Should have accessory spanner wrench x 1 7. Should have accessory oil can with machine oil x 1 8. Should have accessory duster x 1 9. Should have accessory digital electronic counter x 1 10. Should use to determine the velocities of flowing water in open channel and stream. 11. Should have water current meter with one space pivot 12. The bidder must have to provide a duly sealed and signed compliance document on it’s own letterhead for the technical bid qualification. Item No: 4 Dumpy meter S/N Technical Specifications 1. Dumpy Level minimum 5 inch 2. Should have a sturdy tripod stand of minimum 50 inches for stability. 3. Telescope with a minimum of 200 mm level 4. Magnification of minimum 15x 5. The dumpy level should have accessory Plumb bob x 1 6. The dumpy level should have accessory Tightening key X 2 7. Material: ABS/steel/aluminum+ brass, etc. 8. Measures the elevations of different points and distance between the points of same elevation. 9. Designed for Accurate Measurements in the Same Horizontal Plane 10. The bidder must have to provide a duly sealed and signed compliance document on it’s own letterhead for the technical bid qualification. Item No: 5 Pyranometer S/N Technical Specifications 1. Should have an minimum operating temperature of -20° C to +50° C 2. Should have an minimum storage temperature of -20° C to +60° C 3. Material: UV-resistant PVC plastic 4. Accuracy ± 5% 5. Range: 0 to 1000 W/m2 6. Should measure the amount of solar energy reaching a surface or solar irradiance 7. Monitor the performance of solar energy 8. Should help in optimizing the positioning and orientation of solar panels 9. The bidder must have to provide a duly sealed and signed compliance document on it’s own letterhead for the technical bid qualification. Item No: 6 Digital Anemometer S/N Technical Specifications 1. Should have 10 points average for air flow 2. Accuracy ± 5 % (rdg + 40 ft / m) and range: 10 to 50 ft/min 3. Accuracy ± 5 % (rdg + 0.2 m/s) and range: 1 to 10 m/s 4. Accuracy ± 5 % (rdg + 0.8 km/h) and range: 5 to 80 km/h 5. Accuracy ± 5 % (rdg + 0.4 MPH) and range: 1 to 50 MPH 6. Accuracy ± 5 % (rdg + 0.4 Knots) and range: 1 to 40 knots 7. Minimum 50 mm ball bearing vane wheel 8. Should have a LCD display 9. Must have its own battery of minimum 5V 10. CFM/CMM Thermo-anemometer with built-in non-contact IR thermometer 11. Should able to display of air flow or air velocity plus ambient temperature 12. The bidder must have to provide a duly sealed and signed compliance document on it’s own letterhead for the technical bid qualification. Item No: 7 Wet Bulb and dry bulb thermometer S/N Technical Specifications 1. The temperature range is from minimum -5° C to +40° C 2. Humidity range is minimum 0-90% 3. Material: plastic or better 4. The dry bulb thermometer should measure the temperature of ambient air. 5. The wet Bulb thermometer should measure the temperature of a surface from which water has evaporated into a stream of ambient air. 6. The wet and dry bulb should be durable and made of good material. 7. The bidder must have to provide a duly sealed and signed compliance document on it’s own letterhead for the technical bid qualification. Item No: 8 Digital planimeter S/N Technical Specifications 1. Minimum 4 digit pulse count 2. Measuring range minimum 200mm in diameter 3. Accuracy ± 2% 4. Power supply built in battery with Ac adapter with 100-240V 5. Horizontal roller rotational length 10m 6. Vertical measuring range 200 mm 7. Battery charging time 20 hrs 8. Operating duration approx. 20 hrs. 9. Measures the area of maps or planes and flat surfaces. 10. Should able to calculate area of irregular shapes 11. Should be accurate in terms of data and easy to use 12. The bidder must have to provide a duly sealed and signed compliance document on it’s own letterhead for the technical bid qualification. Item No: 9 TLC S/N Technical Specifications 1. Handy U.V. Lamp with long wave (300nm) U.V. light 2. Handy U.V. Lamp with short wave (200nm) U.V. light 3. Large illumination Area. Epoxy painted Dual wave having imported filters fitted below low pressure mercury vapor tubes for short U.V. (200 nm) and long U.V. (300 nm) Plus separate tube for white light. 4. Universal U.V. trans illuminators with filter, 250 nm 5. U.V. trans illuminators 280 nm, 4 tubes 6. Window area 30x 55 mm for middle wave 280 ultra violet having 1 MID-UV tubes 7. Window covered with fixed U.V. transparent sheet, 4 300nm U.V. source are fixed 8. U.V. Chromatography inspection cabinet for viewing and detecting separated substances on T.L.C. layers. 9. The bidder must have to provide a duly sealed and signed compliance document on it’s own letterhead for the technical bid qualification. Item No: 10 Advanced Soil water potential cloud supported smart sensor S/N Technical Specifications General Specifications 1. Operating temperature: -40 to 60 ºC (no water potential measurement below 0 ºC) 2. Operation humidity: 0 ~ 100% RH 3. Dielectric measurement frequency: 70 MHz 4. Measurement time: 150 ms 5. Dimensions: 9.6 cm (L) x 3.5 cm (W) x 1.5 cm (D) 6. Sensor diameter: 3.2 cm 7. Cable length: 5 m Water Potential 8. Range: -9 to -2000 kPa* 9. Resolution: 0.1 kPa 10. Accuracy: ±(10% of reading + 2 kPa) from −9 to −100 kPa Temperature 11. Range: −40 to 60 ºC 12. Resolution: 0.1 ºC 13. Accuracy: ±1 ºC 14. The Sensor shall be fully compatible with existing sensors node having topology of IEEE 802.15.4 standard defines a low-rate wireless personal area network (LR-WPAN).The same must be confirmed & complied by the respective OEM with undertaking & declaration in technical by compliance sheet. 15. The sensor with sensor board must be fully functional and compatible with existing cloud gateway. The same must be confirmed and complied by OEM in compliance sheet. 16. The bidder must have to provide a duly sealed and signed compliance document on OEM’s own letterhead for the technical bid qualification. As the item requires high precision and accuracy bid specific oem authorization from oem/oem’s authorized distributor is must for the technical and post sales service support of the oem. Item No: 11 Smart Vapor pressure, humidity, temperature and air pressure with cloud connectivity support S/N Technical Specifications General Specifications 1. Operating temperature: −40 to 80 ºC 2. Measurement time: 50 ms 3. Dimensions: 2.0 cm (0.8 in) 5.4 cm (2.1 in) 4. Cable length: 5 m Vapor pressure 5. Range: 0 to 47 kPa 6. Resolution: 0.01 kPa 7. Temperature 8. Range: −40 to 80 ºC 9. Resolution: 0.1 ºC 10. Equilibration time: <165 s (response time in 1 m/s air stream) 11. Long term drift: < 0.03 ºC/year typical 12. Accuracy: ±0.2 °C Barometric Pressure 13. Range: 1 to 120 kPa 14. Resolution: 0.01 kPa 15. Accuracy: ±0.05 kPa at 25 °C 16. Equilibration Time (τ, 63%) <10 ms 17. Long-Term Drift <0.1 kPa/year, typical Relative Humidity 18. Range: 0 to 100% RH 19. Resolution: 0.1% RH 20. Equilibration time: < 25 s (response time in 1 m/s air stream) 21. Hysteresis: <0.80% RH typical 22. Long term drift: <0.25% RH/year typical 23. The Sensor shall be fully compatible with existing sensors node having topology of IEEE 802.15.4 standard defines a low-rate wireless personal area network (LR-WPAN).The same must be confirmed & complied by the respective OEM with undertaking & declaration in technical by compliance sheet. 24. The sensor with sensor board must be fully functional and compatible with existing cloud gateway. The same must be confirmed and complied by OEM in compliance sheet. 25. The bidder must have to provide a duly sealed and signed compliance document on OEM’s own letterhead for the technical bid qualification. As the item requires high precision and accuracy bid specific oem authorization from oem/oem’s authorized distributor is must for the technical and post sales service support of the oem. Item No: 12 Advanced cloud enabled Weather Station sensor S/N Technical Specifications Wind Speed 1. Range 0.1 m/s to 60 m/s 2. Accuracy ± 3% to 40 m/s, ± 5% to 60 m/s 3. Resolution m/s 0.01 4. Starting Speed 0.01 m/s 5. Sampling Rate 1 Hz 6. Units m/s, km/hr, mph, kts, ft/min Wind direction 7. Range: 0-359º 8. Accuracy: ±3º to 40 m/s; ±5º above 40 and up to 60 m/s 9. Sampling Rate :1 Hz 10. Resolution: 1º 11. Starting threshold: 0.05m/s 12. Units: Degrees Precipitation 13. Measurement type: Optical 14. Range 0 to >300 mm/hr 15. Precipitation Resolution 0.08 mm 16. Repeatability: 3% 17. Units mm/hr, mm/total, mm/24 hr, in/hr, in/total, in/24 hr 18. Heating: Yes Output 19. Output rate: 1/s.1/min, 1/hr 20. Digital communication modes: Serial RS232, RS422, RS485, SDI-12, NMEA, MODBUS, ASCI 21. Analog outputs: Available via separate optional device Power 22. Power supply: 5 to 30 VDC 23. Power (nominal) 12vdc: 64mA continuous high mode. 0.7mA eco-power mode Environmental conditions 24. IP rating: 66 25. Operational temperature: -40º to 70º 26. EMC standard: BS EN 61326-2-2013 FCC, CFR Title 47, Part 15, Subpart B, Class A digital device 27. CE marking: Yes 28. Origin: UK 29. FCC Compliant: Yes 30. Weight: ~0.5KG 31. The Sensor shall be fully compatible with existing sensor node having topology of IEEE 802.15.4 standard defines a low-rate wireless personal area network (LR-WPAN).The same must be confirmed & complied by the respective OEM with undertaking & declaration in technical by compliance sheet. 32. The sensor with sensor board must be fully functional and compatible with existing cloud gateway. The same must be confirmed and complied by OEM in compliance sheet. 33. The bidder must have to provide a duly sealed and signed compliance document on OEM’s own letterhead for the technical bid qualification. As the item requires high precision and accuracy bid specific oem authorization from oem/oem’s authorized distributor is must for the technical and post sales service support of the oem. Item No: 13 Smart Conductivity, water content and soil temperature cloud connectable enabled sensor S/N Technical Specifications General Specifications 1. Operating temperature: -40 to 60 ºC 2. Dielectric measurement frequency: 70 MHz 3. Measurement time: 150 ms (maximum) 4. Dimensions: 9.4 x 2.4 x 7.5 cm 5. Needle length: 5.5 cm 6. Cable length: 5 m Volumetric water content 7. Accuracy: ±0.03 m3 / m3 typical in mineral soils that have solution electrical conductivity < 8 dS/m 8. Resolution: 0.001 m3 / m3 9. Range: Mineral soil calibration: 0.00-0.70 m3 / m3 ; Soilless media calibration: 0.0-1.0 m3 / m3 10. The Sensor shall be fully compatible with existing sensor nodes having topology of IEEE 802.15.4 standard defines a low-rate wireless personal area network (LR-WPAN). The same must be confirmed & complied by the respective OEM with undertaking & declaration in technical by compliance sheet. 11. The sensor with sensor board must be fully functional and compatible with existing cloud gateway. The same must be confirmed and complied by OEM in compliance sheet. 12. The bidder must have to provide a duly sealed and signed compliance document on OEM’s own letterhead for the technical bid qualification. As the item requires high precision and accuracy bid specific oem authorization from oem/oem’s authorized distributor is must for the technical and post sales service support of the oem. Item No: 14 Advanced cloud connectivity enabled smart luminosity sensor S/N Technical specifications 1. Operating temperature: -30 ºC to +80 ºC 2. Dynamic range: 0.1 to 40000 Lux 3. Spectral range: 300 - 1100 nm 4. Usage: indoors and outdoors 5. The sensor shall be fully compatible with existing sensors node having topology of IEEE 802.15.4 standards defines a low-rate wireless personal area network (LR-WPAN). The same must be confirmed & complied by the respective OEM with undertaking & declaration in technical by compliance sheet. 6. The sensor with sensor board must be fully functional and compatible with existing cloud gateway. The same should be confirmed and complied by the OEM in compliance sheet. 7. The bidder must have to provide a duly sealed and signed compliance document on OEM’s own letterhead for the technical bid qualification. As the item requires high precision and accuracy bid specific oem authorization from oem/oem’s authorized distributor is must for the technical and post sales service support of the oem (C) Irrigation & Water Management Laboratory S/N Name of the item Qty. Unit 1. Water Quality testing Kit 1 Nos 2. Double ring Infiltrometer 5 Nos 3. Tensiometer 2 Nos 4. Sprinkler 1 Nos 5. Cut section of pumps 4 Nos 6. Micro Sprinklers Kit 1 Nos 7. Drip irrigation system 1 Nos 8. Pan Evaporimeter 5 Nos 9. Sieve shaker 1 Nos 10. Soil testing Kit 2 Nos 11. Smart agriculture UV radiation probe 1 Nos 12. Cloud connectivity enabled solar powered smart Agri. Node 2 Nos 13. Smart cloud based Solar radiation Sensor 1 Nos. 14. Cloud connectivity based advanced leaf wetness sensor 1 Nos. Item No: 1 Water quality testing kit S/N Technical specifications 1. pH Range 0 to 14 pH 2. pH resolution ± 0.01 pH 3. pH accuracy ± 0.01 pH 4. ORP range 0 to ± 1500mv 5. ORP accuracy ± 2mv 6. Temperature compensation 0 to 50°C, (manual or automatic) 7. Conductivity accuracy ± 2 % F.S. 8. Salinity range 0 to 30 ppt, 0 to 3% 9. Salinity accuracy ± 2 ppt, ± 2% 10. TDS range 0 to 80 ppt 11. TDS accuracy ± 2 % F.S. 12. The bidder must have to provide a duly sealed and signed compliance document on it’s own letterhead for the technical bid qualification. Item No: 2 Double ring Infiltrometer S/N Technical specifications 1. Ring Size minimum 20 cm and 40 cm diameter 2. Rings height minimum 20 cm 3. Vernier caliper, pointer included 4. made of 10-gauge m. s. sheet 5. Should have accessory pointer x 1 6. Should have accessory Vernier caliper x 1 7. Should have accessory hammer and driving plate x 1 8. Minimum weight 2.5 kg 9. The bidder must have to provide a duly sealed and signed compliance document on it’s own letterhead for the technical bid qualification. Item No: 3 Tensiometer S/N Technical specifications 1. Length minimum 15 cm long 2. Dual scale of millibars -600 to 0 and mmhg (-300 to 0) range 3. Represents humidity, high humidity for most crop 0-5 Kpa 4. Represents moist, be adaptable to the growth of crop 5-20 Kpa 5. Represent dry, need water for some hydrophilic plant 10-30 Kpa 6. Represent very dry, need water for most crops 30 Kpa 7. Measures Soil moisture accurately 8. Monitoring should done using the tool 9. Length of potter pipe 4 cm 10. The bidder must have to provide a duly sealed and signed compliance document on it’s own letterhead for the technical bid qualification. Item No: 4 Sprinkler S/N Technical specifications 1. Should cover 360 watering area 2. Should be rotatory and dispense the water minimum 15 feet 3. Should be comes with minimum thread size of ½ inches 4. Covering area of minimum 5 meters 5. The minimum quantity is 8 nos 6. The product weight is minimum 100g 7. Should be made of high-quality plastic material with high strength 8. The bidder must have to provide a duly sealed and signed compliance document on it’s own letterhead for the technical bid qualification. Item No: 5 Cut Sections of Pumps S/N Technical specifications 1. Cut section of centrifugal pump model Motor Phase 1 2. Cut section of centrifugal pump model Motor horsepower 0.5 minimum 3. Cut section of centrifugal pump model Motor RPM 500 4. Cut section of centrifugal pump model Frequency 509 HZ 5. Cut section of centrifugal pump model Voltage 240 6. Cut section of submersible pump model Motor Phase 1 7. Cut section of submersible pump model Motor horsepower 0.5 minimum 8. Cut section of submersible pump model Motor RPM 500 9. Cut section of submersible pump model Frequency 509 HZ 10. Cut section of submersible pump model Voltage 240 11. The bidder must have to provide a duly sealed and signed compliance document on it’s own letterhead for the technical bid qualification. Item No: 6 Micro sprinklers S/N Technical specifications 1. Minimum 0.5 inch size 2. Minimum rate of flow of rate 3.5 LPM 3. The minimum quantity is 20 nos. 4. Minimum connect water pressure garden house size 16 mm 5. Minimum working Pressure 1 bar 6. Nozzle diameter 1.0 mm to 2 .0 mm 7. Radius 3 to 5 m 8. Should be run at low pressures and volume of irrigation system 9. Should be suitable for high yield and less water use 10. Material: ABS 11. Style: Rotary 12. The bidder must have to provide a duly sealed and signed compliance document on it’s own letterhead for the technical bid qualification. Item No: 7 Drip Irrigation system S/N Technical specifications 1. Should include connector x 2 Nos 2. Should also include dropper 20 pcs 3. 4/7 pe tube minimum 10 meters. 4. Should include Teflon tape 5 pcs 5. Should include three-way connector x 20 Nos 6. Should include hose connector x 10 Nos 7. Should include support rod x 25 Nos 8. Should include dropper x 28 Nos 9. Should include mist nozzle x 15 Nos 10. The bidder must have to provide a duly sealed and signed compliance document on it’s own letterhead for the technical bid qualification. Item No: 8 Pan Evaporimeter S/N Technical specifications 1. No of pules count up to 4 digits 2. Measurement area up to 5 m2 3. Power off/on feature 4. Measurement value 5 m2 5. Measurement cumulative are 0.1 m2 6. Diameter 80 cm 7. Dimension 15 cm height 8. Material ABS/IRON/Steel/copper, etc 9. Should be circular or square in shape 10. Should be helpful in determining of quantity of evaporation at a given location. 11. Should hold water during observation of evaporation 12. The bidder must have to provide a duly sealed and signed compliance document on it’s own letterhead for the technical bid qualification. Item No: 9 Sieve shaker S/N Technical specifications 1. Diameter 10 cm to 25 cm 2. Sieve length 5 inches 3. Eight minimum 8 kg 4. Diameter 100 mm 5. Capacity is minimum 5 inches to 10 inches 6. Minimum 4 sieves supported 7. The instrument should be used to separate particles of different sizes. 8. The build material should be sturdy 9. Operating style manual 10. Should be useful for quality control, research, and development purposes. 11. Should be helpful in improved reproducibility, and reliable results. 12. The bidder must have to provide a duly sealed and signed compliance document on it’s own letterhead for the technical bid qualification. Item No: 10 Soil testing Kit S/N Technical specifications 1. Display 2 inches LCD display 2. pH range 0 to 10 pH 3. pH temperature compensation 0 – 60°C 4. pH resolution 0.1 pH 5. Accuracy ± 0.5 pH ± 1 digit 6. Conductivity range 0-10ms, 0-100 7. Conductivity resolution 0.5µmhos 8. Conductivity accuracy ±2% FS ± 1 digit 9. Temperature range 0-80°C 10. Temperature resolution 0.1 11. Accuracy ± 0.1°C ± 1 digit 12. TDS range 0-10 ppt 13. D.O. range 0- 10ppm 14. D.O. temperature, compensation- 10°C-30°C 15. mV (ORP) range o to ±500 mV 16. mV (ORP) resolution 1 mV 17. The bidder must have to provide a duly sealed and signed compliance document on it’s own letterhead for the technical bid qualification. Item No: 11 Smart agriculture UV radiation probe S/N Technical specifications 1. Operation temperature: -30 to 85 ºC 2. Operation humidity: 0 to 100% 3. Temperature response: -0.1% per ºC 4. Sensitivity: 8.33 mV / μmol·m^-2·s^-1 5. Calibration factor (reciprocal of sensitivity): 0.12 μmol·m^-2·s^-1 / mV 6. Calibration uncertainty: ±10% 7. Spectral range: 300 ~ 400 nm (wavelengths where response is greater than 10 % of maximum) 8. Measurement range: 0 to 100 Wm−2 9. Repeatability: <0.5% 10. Long-term drift: Less than 2% per year 11. Non-linearity: Less than 1% 12. Field overview: 180º 13. Directional (cosine) response: ±2% at 45º; ± 5 % at 75º zenith angle 14. Dimensions: 30.5 mm diameter, 37 mm height 15. The Sensor shall be fully compatible with existing sensors node having topology of IEEE 802.15.4 standard defines a low-rate wireless personal area network (LR-WPAN).The same must be confirmed & complied by the respective OEM with undertaking & declaration in technical by compliance sheet. 16. The bidder must have to provide a duly sealed and signed compliance document on OEM’s own letterhead for the technical bid qualification. 17. The sensor with sensor board must be fully functional and compatible with existing cloud gateway. The same must be confirmed and complied by OEM in compliance sheet. As the item requires high precision and accuracy bid specific oem authorization from oem/oem’s authorized distributor is must for the technical and post sales service support of the oem Item No: 12 Cloud connectivity enabled solar powered smart Agri. Node S/N Technical specifications 1. Material and Sealing: polycarbonate and Polyurethane 2. Cover screws: noncorrosive material 3. Ingress protection: IP65 4. Weatherproof: true - nach UL 746 C 5. Ambient temperature (min.): -20 °C 6. Ambient temperature (max.): 65°C Mote Specifications 7. Microcontroller: ATmega1281 8. Frequency: 14.74MHz 9. SRAM: 8 kB 10. EEPROM: 4 kB 11. FLASH: 128 kB 12. SD Card support : 16 GB 13. Temperature range: [-30 ºC, +70 ºC] Radio interfaces 14. Dual Power 15. Internal 3.7V, 6,600mAh rechargeable battery 16. Recharge: Power Adapter Wireless radio specifications 17. TX power: I. 802.11b: 17 dBm II. 802.11g: 14 dBm 802.11n: 12 dBm 18. RX sensitivity: I. 802.11b @11Mbps PER<8%: -87 dBm II. 802.11b @1Mbps PER<8%: -94 dBm IMAGEN III. 802.11g @54Mbps PER<10%: -73 dBm IV. 802.11g @6Mbps PER<10%: -86 dBm V. 802.11n MCS0 PER<10%: -86 dBm 802.11n MCS0 PER<10%: -70 dBm Chipset Consumption 19. TX mode: 350 mA 20. RX mode: 130 mA Internet protocols 21. ARP, ICMP, IP, UDP, TCP, DHCP, DNS, NTP, HTTP, FTP Security protocols 22. SSL3/TLS1, HTTPS, RSA, AES-128/256, 3DES, RC-4, SHA-1, MD-5, WEP, WPA and WPA2 Accelerated in HW: AES, 3DEC and SHA Wireless Specifications 23. Standards: IEEE 802.11b/g/n 24. Frequency: I. Europe: 2.412 – 2.472 GHz II. USA: 2.412 – 2.462 GHz Japan: 2.412 – 2.484 GHz 25. Channels: 1 to 11 26. Antenna: UFL connector 27. The bidder must have to provide a duly sealed and signed compliance document on OEM’s own letterhead for the technical bid qualification. Additional Wireless Bridge connectivity appliance (Qty.-1, common among Nodes) 28. Supply and installation of 802.11ax Outdoor wireless Sensor’s Bridge connectivity appliance with 2x2 MIMO OFDMA, also should have IP55 Weather protection. 29. Should work on 2.4 and 5 GHz wireless frequency simultaneously 30. Should support maximal ratio Combining Should be operable at 20, 40- and 80-MHz channels, Should support data rates up to 575 Mbps over 802. 11n and 1200 Mbps over 802.11ax technology, Should support A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) packet aggregation. Should have cyclic delay diversity support, Should have maximum like hood demodulation support, Should have low density parity check support 31. Should be operable on the following frequency bands : 2.4 GHz (IEEE802.11 b/g/n) (FCC): 2.412 to 2.462 GHz, (ETSI): 2.412 to 2.472 GHz , 5 GHz (IEEE 802.11 a/n/ac) - (FCC): 5.15 to 5.35 GHz; 5.725 to 5.850 GHz (ETSI): 5.15 to 5.35 GHz; 5.470 to 5.725 GHz 32. 2x2 MU-MIMO with two spatial stream, • OFDMA, • 802.11ac/ax beamforming (transmit beamforming), • Maximal ratio combining (MRC), • TWT • BSS Coloring , • 20-, 40- and 80- MHz channels • PHY data rates total up to 575 Mbps (2.4GHz) + 1200 Mbps (5GHz) , • Packet aggregation: A-MPDU (Tx/Rx), AMSDU (Tx/Rx) , • Cyclic Delay diversity (CSD) support, • Maximum Likelihood Demodulation (MLD) support, • Low Density Parity Check (LDPC) support. 33. Should support WEP, WPA/WPA2-PSK WPA/WPA2-Enterprise ,WMM,WLAN Access control list, also support WPA3 34. Should support EAP-TLS, EAP-TTLS, EAP-PEAP, EAP-FAST, EAP-AKA and EAP-SIM 35. For the better post-sales service support, bid Specific OEM Authorization must be submitted by the bidder along with the bid for technical bid qualification, for the said appliances/ services duly complied by the OEM itself. 36. The better management and compatibility with existing setup “Plug and sense with External Solar panel” must support our existing nebula cloud service. The same must be confirmed by the respective oem only, and the declaration in support of the same must be submitted in the technical bid document. 37. The bidder must have to provide a duly sealed and signed compliance document on OEM’s own letterhead for the technical bid qualification. Item No: 13 Smart cloud based Solar radiation Sensor S/N Technical specifications 1. Operation temperature: -40 ~ 60 ºC 2. Operation humidity: 0 ~ 100% RH 3. Sensitivity: 0.1 mV / μmol·m^-2·s^-1 4. Calibration factor (reciprocal of sensitivity): 10 μmol·m^-2·s^-1 / mV 5. Non-linearity: < 1% (up to 4000 μmol·m^-2·s^-1 / mV) 6. Non-stability (long-term drift): <2% per year 7. Spectral range: 370 ~ 650 nm 8. Repeatability: <0.5% 9. Diameter: 2.4 cm 10. Height: 3.3 cm 11. Cable length: 5 m 12. The Sensor shall be fully compatible with existing sensors node having topology of IEEE 802.15.4 standard defines a low-rate wireless personal area network (LR-WPAN). The same must be confirmed & complied by the respective OEM with undertaking & declaration in technical by compliance sheet. 13. The sensor with sensor board must be fully functional and compatible with existing cloud gateway. The same must be confirmed and complied by OEM in compliance sheet. 14. The bidder must have to provide a duly sealed and signed compliance document on OEM’s own letterhead for the technical bid qualification. As the item requires high precision and accuracy bid specific oem authorization from oem/oem’s authorized distributor is must for the technical and post sales service support of the oem Item No: 14 Cloud connectivity based advanced leaf wetness sensor S/N Technical specifications 1. Operating temperature: -20 to 60 ºC 2. Measurement time: 10 ms 3. Probe dimensions: 11.2 cm x 5.8 cm x 0.075 cm 4. Cable length: 5 m 5. The Sensor shall be fully compatible with existing sensors node having topology of IEEE 802.15.4 standard defines a low-rate wireless personal area network (LR-WPAN).The same must be confirmed & complied by the respective OEM with undertaking & declaration in technical by compliance sheet. 6. The sensor with sensor board must be fully functional and compatible with existing cloud gateway. The same must be confirmed and complied by OEM in compliance sheet. 7. The bidder must have to provide a duly sealed and signed compliance document on OEM’s own letterhead for the technical bid qualification. As the item requires high precision and accuracy bid specific oem authorization from oem/oem’s authorized distributor is must for the technical and post sales service support of the oem (D) Food Engineering Laboratory S/N Name of the item Qty. Unit 1. Pulper 1 Nos 2. Sifter 1 Nos 3. Blender 1 Nos 4. Temperature control water bath 1 Nos 5. Can sealer 1 Nos 6. Grain separator 1 Lot. 7. Temperature Sensor 1 Nos. Item No:1 Pulper S/N Technical Specifications 1. Should have minimum capacity of 50 - 100 Kg/hr. 2. Should be supported a minimum of 2 or 3 fruits or vegetables 3. Should have a minimum of 1.0 HP single phase motor 4. Minimum unit per hour consumption 1.2 unit/hr. 5. Minimum weight 80 Kg 6. Should be capable of extracting pulp from various material 7. Should be able to prepare samples for analysis, processing needs. 8. Should be easy to use and clean 9. The bidder must have to provide a duly sealed and signed compliance document on it’s own letterhead for the technical bid qualification. Item No: 2 Sifter S/N Technical Specifications 1. Should have minimum capacity of 50 Kg/hr. 2. Should have a size of minimum 18 inches 3. Operating Voltage minimum 220 or more 4. Minimum Phase working 1 5. Minimum HP 0.5 6. Should have a size of minimum 18 inches 7. Frequency 50 Hz 8. Material: Mild steel 9. Should be operable in automatic or manual mode 10. Should be help to separate materials based on their particle size 11. The bidder must have to provide a duly sealed and signed compliance document on it’s own letterhead for the technical bid qualification. Item No: 3 Blender S/N Technical Specifications 1. Should be usage for mixing and blending of different materials and powder homogenously. 2. The blender should be made of high-quality material like iron, steel, etc. 3. Should having minimum 5 kg capacity. 4. The bidder must have to provide a duly sealed and signed compliance document on it’s own letterhead for the technical bid qualification. Item No. 4 Temperature Controlled water bath S/N Technical Specifications 1. Should have wide supply range of 110-240V AC (Un) -20 to 10% of Un. 2. Should have minimum of 2 digit LED display 3. Thermocouple (J & K)/RTD 3-wire (Pt-50) sensor inputs. 4. Single/Dual acting PID controllers with 3 Control modes 5. 4 Segment Ramp & Soak profile with Power Failure resumption modes 6. RS 485 Communication 7. Should have IP 20 (for terminal & enclosure) IP 40 (for front panel) 8. Should have controls mode ON-OFF asymmetric/symmetric 9. Should have thermocouple sensor input 10. The bidder must have to provide a duly sealed and signed compliance document on it’s own letterhead for the technical bid qualification. Item No. 5 Can sealer S/N Technical Specifications 1. Length minimum 6 inches 2. Circle diameter minimum 3 inches 3. Minimum weight 200 gm 4. Should be able to use in preserving the quality and freshness of products 5. Should be of made up of high-quality material like Iron or ABS for preventing leakages. 6. Should be opera table manually for sealing can 7. The bidder must have to provide a duly sealed and signed compliance document on it’s own letterhead for the technical bid qualification. Item No. 6 Flat Grain separator S/N Technical Specifications 1. Should have a minimum capacity of 100 Kg/hour. 2. Should have a minimum of material Iron or M.S. 3. Should have a minimum motor of 1 HP single phase. 4. Should have been used as a flat grain separator. 5. The bidder must have to provide a duly sealed and signed compliance document on it’s own letterhead for the technical bid qualification. Item No: 7 Temperature Sensor S/N Technical specifications 1. Measuring range: -40ºC to 60ºC, 0 to 100%RH 2. Accuracy: +-0.3ºC at 25ºC, +-3%RH at 25ºC and 20%-80%RH. 3. Long term stability: <0.5℃/year, <3%RH/year 4. Response time: < 15s, <12s (63%) 5. Working temperature: -40～60℃ 6. Storage environment:-40～80℃ (No condensation) 7. Protection level: IP65 8. Material: ABS 9. The sensor shall be fully compatible with existing sensors node having topology of IEEE 802.15.4 standards defines a low-rate wireless personal area network (LR-WPAN). The same must be confirmed & complied by the respective OEM with undertaking & declaration in technical by compliance sheet. 10. The sensor with sensor board must be fully functional and compatible with existing cloud gateway. The same should be confirmed and complied by the OEM in compliance sheet. 11. The bidder must have to provide a duly sealed and signed compliance document on OEM’s own letterhead for the technical bid qualification.
