|
| 1 | 140 Kg.,8.0 Mtrs. long PCC pole |
| 2 | 11 KV Pin Insulator Polymer Composit (5 KN) |
| 3 | AAACRabbit conductor0.05 sq. inch. (55 sq.mm. Al.Eq.) |
| 4 | M S Angle 65X65X6 mm |
| 5 | 11 KV(45KN) Composite Polymer Disc Insulators |
| 6 | 11 KV Strain hardware (T&C type) fittings |
| 7 | M S Channel 100X50x6 mm |
| 8 | LT XLPE Cable Arial Bunch 3X50 + 1X16 + 1X35 Sq mm.1100 Volts with aluminium alloy Baremessenger wire |
| 9 | 11 KV D.O. Fuse Unit Polymer type |
| 10 | XLPE Cable 1 core unarmoured 70 sqmm Aluminium conductor 1100 Volts |
| 11 | PVC 2 CORE UN ARMOURED 2.5 SQMM ALUMINIUM CONDUCTOR |
| 12 | Singlephase Electronic meter with data downloading facility & box 5-30 Amps. |
| 13 | 63 KVA Conventional Distribution Transformers,BIS Certified Level-II (Old)/Level-I(New). |
| 14 | Three phase Static Energy meters 20-80 Amps.with L.S. & TOD Facility with box |
| 15 | XLPE Cable 1 core unarmoured 50 sqmm Aluminium conductor 1100 Volts |
| 16 | Jointing Sleeves suitable for Rabbit (55Sq.mm.Al. Eq. ) AAAC conductor |
| 17 | Danger Boards Enamelled 11 KV |
| 18 | Back Clamp for 140 Kg PCC Pole MS Flat 50x6 mm |
| 19 | Earthing Coil of 115 Turns of 50 MM.Dia and 2.5 Mtr. Lead of 4.0 MM G.I Wire |
| 20 | Stay set complete without Stay wire 16 mm. (Painted) |
| 21 | STAY WIRE 7/3.15 MM.(7/10 SWG) |
| 22 | Clamp for 140 Kg PCC Pole MS Flat 50x6 mm |
| 23 | Stay Insulators 90X65mm |
| 24 | Back filling of poles with boulders. |
| 25 | G.I. WIRES4.0 MM. (8 SWG) |
| 26 | Stone Block/Pre cast block for base pedding(450X450X75MM) |
| 27 | Concreting of stay (16 mm / 12 mm) @ 0.2 Cmt. per stay |
| 28 | Red oxide paint |
| 29 | Aluminium paint |
| 30 | Aluminium Binding wire and tape |
| 31 | M.S.Nuts with Bolts |
| 32 | Concreting of structures & foundation (1:3:6) |
| 33 | Earthing for PCC Pole4.00 mm-8 SWG G.I wire-0.8 Kg, per pole |
| 34 | Anti climbing devices ( Barbed wire 2.24 mm dia, 14 SWG) |
| 35 | L.T. Distribution box with Isolator on Incoming with HRC fuse for 63 KVA DTR (200 Amp. Isolator & 6 SP of 60 Amp.) |
| 36 | LT A.B Cable tension clamps (Galvanized) |
| 37 | LT A B cable Suspension clamps (Galvanized) |
| 38 | Clamps for neutral for AB Cable |
| 39 | Piercing connector Type-I for single/three phase (Main 16-50 sqmm tap-off 16-50 sqmm) |
| 40 | Piercing connector Type-II (Main 16-50 sqmm tap- off 16-50 sqmm) |
| 41 | Single Phase Service connection box (Deep Drwan Metal Service Connection Boxes )with one incoming up to 25 mm2 and 8 no outgoing up to10mm2 with insulated multiple outgoingconnector- |
| 42 | 9 KVGapless type( 5KA) Polymer for DTR |
| 43 | Bi-metallic clamps Distribution Transformers Bushing |
| 44 | Bi-metallic clamps suitable for 12mm dia stud and 80sqmm AAAC |
| 45 | G.I. STRIP 25X3 MM1 |
| 46 | G.I.Pipe 40 mm Dia C grade type |
| 47 | Bentonite compound powder |
| 48 | Galvanized nut & bolt with washer |
| 49 | Wooden Board 10\"x8\" |
| 50 | Rack Bolt/Screw |
| 51 | G.I. Wire 3.15 mm. (10 SWG) |
| 52 | PVC Bush |
| 53 | LED Lamp with 9 Watt (Complete) |
| 54 | 3 Pin 5A Socket (Two no. Piano type switch, Bulb Bakelite Holder with wiring & E |
| 55 | Switch Board |
| 56 | MCB of 16 Amp |
| 57 | Erection cost |
| 58 | 18% (CGST+MPGST) on Erection cost |
