|
| 1 | Supply & Erection of 33KVsection/dead end double pole/Four Polestructure of following type of supports duly grouted.Plinthed, plastered and painted in the same manneras already specified for respective supports with M.S. channels of size 125×65mmand bracing of angle iron size 65×65×6mm 3.80 M length fixed with packing piece and bolt and nuts as required Quantity as Specification including cost of material, labour and T&P required for proper completion of work as per direction of E/I. [MAKE :- ONLY THOSE MANUFACTURER WHOSE G.T.P. IS APPROVED BY DVVNL] |
| 2 | Double Pole made of 11 Mtr. Long SP-55 ST Pole (Bottom Portion Galvamised) |
| 3 | Making suitable earth of H.T. overhead line pole with 2.5 Mts. long 20mm M.S rod connected with 7/16 SWGG.S. wire duly clamped & binded on pole including the cost of materials, labour and T & P required for proper completion of work as per direction of E/I. |
| 4 | Supply & Fixing of danger board (H.T.) size 200x250mm at suitable height of pole as per direction of E/I. |
| 5 | Supply & Fixing of barbed wire (1.5kg) duly clamped with 20x3mm M.S. flats at both ends on steel poles at suitable height as/per direction of E/I. As per Page No.. |
| 6 | Supply of following sizes stranded compact circular Aluminium conductor screen with extruded semi conducting compound XLPE insulated, insulation screening with extruded semi conducting compound in combination with copper tape cores laidup innersheath of PVC galvanised steel flat strip armourd and over all sheathed cable confirming to IS 7098 (part -II) 1985 with the latest , mcndment complete in all respect as per direction of E/l. [MAKE :-POLYCAB/ GLOSTER/ STERLITE/ L.S./HAVELL\"S/ UNIVERSAL/ KEI ONLY AFTER GETTING G.T.P. APPROVED BY DVVNL] |
| 7 | 300Sqmm 3 core 33KV XLPE |
| 8 | Supply and jointing of following sizes out door type (heat Shrinkable) Jointing kit 33 KV XLPE cable including cost , labour, T & P etc. for proper completion of work.[MAKE :- ONLY THOSE MANUFACTURER WHOSE G.T.P. IS APPROVED BY DVVNL] |
| 9 | (i) 240 Sqmm-400 Sqmm. |
| 10 | Supply of 33 KV Pin Insulator with G.I. Pin with Nut etc. fixed on Double Pole of 33 KV Line Complete in all respect with all required materialT&P etc. |
| 11 | Laying of one number XLPE Power cable of 11/33 KV grade of following size direct in ground by mechanical means alongwith laying of pipe as required. |
| 12 | Above 120 sqmm and upto 400 sqmm. |
| 13 | Supply of Heavy Density Polyethylene pipes ISI marked anti radiant grade OD - 160 mm dia PN-6 grade having minimum wall thickness 9.5 mm as per IS code 4984 with socket coupler with trenchless excavation system.Complete in all respects Rex/Duraline/ Time/ Pioneer/Eonn Plast/Narendra Plast.Make as per direction of E/I (E-100).[MAKE :- ONLY THOSE MANUFACTURER WHOSE G.T.P. IS APPROVED BY DVVNL] |
| 14 | Laying of one number XLPE Power cable of 33 KV grade of following size in the existing RCC/HUME/METAL pipe as required. |
| 15 | Above 120 sqmm and upto 400 sqmm. As per Page No.. |
| 16 | Supply & Laying of 150 mm Dia G.I. Pipe for Cable duly clamp with supprots by 2 Nos Clamps of 50 x 6 mm M.S. flat bolt, nuts, & washer required for proper completion of work.[MAKE-TATA/SAIL/JINDAL] |
| 17 | S/F of cable route marker for 33 KV H.T. cable made of 1:2:4 RCC Block size 1000 × 400 × 100 mm grouted with 1:3:6 (1-cement, 3 coresand & 6-stone grit of 20mm nominal size) 30 cm below G.L. with painting, numbering & Marking ect. Complete in all respect with all required material T&P etc. as per direction of E./I,. |
