Rural Development Local Bodies Closing in 0 days TDR #49344025

Tender For Retender For Material Supply For Mgnregs Works 2025-26

Issued by Local Bodies · peruvayal, Kerala
Tender Value
39.35 Lakhs
Estimated cost
Bid Submission
03 Jun 2025
0 days left
EMD
50000
Bank guarantee accepted
Document Fee
2975
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
peruvayal → Kerala
EMD Exemption
Available
Quantity
Not Available

Project Description

Retender For Material Supply For Mgnregs Works 2025-26 , Materials , Quarry Waste , Stone Aggregate (Single Size):40 Mm Nominal Size , Stone Aggregate (Single Size):20 Mm Nominal Size , Stone Aggregate (Single Size):10 Mm Nominal Size , Stone Aggregate (Single Size):06 Mm Nominal Size , Coarse Sand Zone Iii , Fine Sand , Portland Cement , Stone For Masonry , Twisted Steel Deformed Bar , Laterite Stone (35*20*20Cm) , Hire Charges For Concrete Mixer , Vibrator , Mild Steel Sheets With Bolt And Nuts Rest On Pintels , Solid Block Of Size 40*20*15 Cm , Iron Pintels , Pvc Pipe 63 Mm Outer Dia 4Kgf/Cm , Pvc Bend 63 Mm Dia , Royalty For Good Earth , Mild Steel Tubes Hot Finished Welded Type , Red Oxide Zinc Chromate Primer , Glavanised Wire Mesh Of Average Width Of Aperture 1.4 And Nominal Dia Of Wire 0.63M , Gi Trafford Profile Sheet .35 Mm Thick , Wire Nails , Bitumen Washer , Stainless Steel Screw , Mild Steel Round Bar Above 12 Mm Dia , Flats Upto 10 Mm In Thickness , Epoxy Paint , Average Rate Of Mild Steel Round Bars For Reinforcement , Sundries , Float Glass Sheet Of Nominal Thickness 4 Mm (Weight Not Less Than 10 Kg/Sqm) , Neoprene/Epdm Rubber Gasket , Multi Surface Paint , Special Primer , 30 Mm Thick Factory Made Glass Fiber Reinforced Plastic Panel Door Shutter I/C Charge , Structural Steel Sucha S Tees Angles Channels Andr.S Joists , Gi Limpet Washer , Galvanised Steel J Or L Hooks 8 Mm Dia , Mild Steel Sheets For Tanks , Mild Steel Hooks , Vitreous China Pedestle Type White Closet , Acrylic Exterior Paint , Black Plastic Sheet(Solid) With Lid C.P Brass Hinges And Rubber Buffers , Flushing Cistern Pvc 10 Lit Capcity White With Fitting , Vitrified Floor Tile 60X60 Size , Welding By Electric Plant , Solid Block Of Size 40*20*10 Cm , Solid Block Of Size 40*20*20 Cm , Galvanised Steel Bolts & Nuts 6 Mm Dia And 25 Mm Long Round Head With Slots

BOQ

Name of Work:Re tender for Supply of Materials for MGNREGSWORKSWARD 1-22
Sl. No. Item Description
1Materials
2Quarry waste
3Stone aggregate (single size):40 mm nominal size
4Stone aggregate (single size):20 mm nominal size
5Stone aggregate (single size):10 mm nominal size
6Stone aggregate (single size):06 mm nominal size
7Coarse sand zone III
8Fine sand
9portland cement
10Stone for masonry
11Twisted steel deformed bar
12Laterite stone (35*20*20cm)
13Hire charges for concrete mixer
14vibrator
15Mild steel sheets with bolt and nuts rest on pintels
16Solid block of size 40*20*15 cm
17Iron pintels
18PVC pipe 63 mm outer dia 4kgf/cm
19PVC bend 63 mm dia
20Royalty for good earth
21Mild steel tubes hot finished welded type
22Red oxide zinc chromate primer
23Glavanised wire mesh of average width of aperture 1.4 and nominal dia of wire 0.63m
24Gi trafford profile sheet .35 mm thick
25Wire nails
26Bitumen washer
27Stainless steel screw
28Mild steel round bar above 12 mm dia
29Flats upto 10 mm in thickness
30Epoxy paint
31Average rate of mild steel round bars for reinforcement
32Sundries
33Float glass sheet of nominal thickness 4 mm (weight not less than 10 KG/SQM)
34Neoprene/EPDM rubber gasket
35Multi surface paint
36Special primer
3730 mm thick factory made glass fiber reinforced plastic panel door shutter i/c charge
38Structural steel sucha s tees angles channels andR.S joists
39GI limpet washer
40Galvanised steel J or L hooks 8 mm dia
41Mild steel sheets for tanks
42Mild steel hooks
43vitreous china pedestle type white closet
44acrylic exterior paint
45Black plastic sheet(solid) with lid c.p brass hinges and rubber buffers
46Flushing cistern pvc 10 lit capcity white with fitting
47vitrified floor tile 60x60 size
48welding by electric plant
49Solid block of size 40*20*10 cm
50Solid block of size 40*20*20 cm
51Galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots

AI Tender Summary

OUR REF NO 49344025
AUTHORITY Local Bodies
TENDER VALUE 39.35 Lakhs
LAST DATE 03-06-2025
Authority
Authority Name Grama Panchayat
Work Description Retender For Material Supply For Mgnregs Works 2025-26 , Materials , Quarry Waste , Stone Aggregate (Single Size):40 Mm Nominal Size , Stone Aggregate (Single Size):20 Mm Nominal Size , Stone Aggregate (Single Size):10 Mm Nominal Size , Stone Aggregate (Single Size):06 Mm Nominal Size , Coarse Sand Zone Iii , Fine Sand , Portland Cement , Stone For Masonry , Twisted Steel Deformed Bar , Laterite Stone (35*20*20Cm) , Hire Charges For Concrete Mixer , Vibrator , Mild Steel Sheets With Bolt And Nuts Rest On Pintels , Solid Block Of Size 40*20*15 Cm , Iron Pintels , Pvc Pipe 63 Mm Outer Dia 4Kgf/Cm , Pvc Bend 63 Mm Dia , Royalty For Good Earth , Mild Steel Tubes Hot Finished Welded Type , Red Oxide Zinc Chromate Primer , Glavanised Wire Mesh Of Average Width Of Aperture 1.4 And Nominal Dia Of Wire 0.63M , Gi Trafford Profile Sheet .35 Mm Thick , Wire Nails , Bitumen Washer , Stainless Steel Screw , Mild Steel Round Bar Above 12 Mm Dia , Flats Upto 10 Mm In Thickness , Epoxy Paint , Average Rate Of Mild Steel Round Bars For Reinforcement , Sundries , Float Glass Sheet Of Nominal Thickness 4 Mm (Weight Not Less Than 10 Kg/Sqm) , Neoprene/Epdm Rubber Gasket , Multi Surface Paint , Special Primer , 30 Mm Thick Factory Made Glass Fiber Reinforced Plastic Panel Door Shutter I/C Charge , Structural Steel Sucha S Tees Angles Channels Andr.S Joists , Gi Limpet Washer , Galvanised Steel J Or L Hooks 8 Mm Dia , Mild Steel Sheets For Tanks , Mild Steel Hooks , Vitreous China Pedestle Type White Closet , Acrylic Exterior Paint , Black Plastic Sheet(Solid) With Lid C.P Brass Hinges And Rubber Buffers , Flushing Cistern Pvc 10 Lit Capcity White With Fitting , Vitrified Floor Tile 60X60 Size , Welding By Electric Plant , Solid Block Of Size 40*20*10 Cm , Solid Block Of Size 40*20*20 Cm , Galvanised Steel Bolts & Nuts 6 Mm Dia And 25 Mm Long Round Head With Slots
Basic Detail
Tender No 2/025-26
Bidding Type Tender
Location
City peruvayal
State Kerala
Key Dates
Publish Date 26 May 2025
Submission Date 03 Jun 2025
Open Date 04 Jun 2025
Finance
Tender Value 39.35 Lakhs
Tender Fee 2975
EMD 50000
Exemption Available
Document List
a8c3565d-61c5-452c-86b1-497ae3b002f2.html
BOQ_1248723.xls
Tendernotice_1.pdf
Tendernotice_2.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

May 26, 2025
11:30 IST

Tender Published

Tender notice published.

Completed
Jun 03, 2025
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Jun 04, 2025

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

a8c3565d-61c5-452c-86b1-497ae3b002f2.html

xls

BOQ_1248723.xls

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders