Tender For One Panchayath One Playground - Development of Ground at Govt. High School in Chirakkara Grama Panchayath, Chathanoor LAC, Kollam District-Plan Fund-Supply and Installation of Outdoor Gym Equipment, Kids Play Equipment & Purchase of Sports Equipment-- 1 Outdoor Gym equipment and Sports Equipment (18% GST) 2 od241625/2024_2025 : Chest Press (Double) - Supply and Installation of Double Chest Press having the following specifications: Dimensions: (L X W X H) 1955 x 710 x 1900 mm. Main center pipe - Ø 114 mm OD “B” class GI pipe. Foundation plate –M.S. round plate of Ø 250mm & 8 mm thick. Foundations cover cap- dome shape of PP / NYLON / HDPE material. Remaining frame - made up of Ø 48 mm OD “B” Class G.I. pipe. Handle - Made up of Ø48mm OD “B” Class G.I. pipe. Link - made up of Ø 48 mm OD “B” Class G.I. pipe. Seat & back rest – 380 X 275 X 60 mm thick high-density polyethylene (HDPE) blow molded with M10 in-sert wall thickness 3 to 4 mm. Bearing bush Closing cap’s– PP / NYLON / HDPE material. Handle must be connected with frame by 8 MM laser cutting MS profile. Top Closing cap – dome shape made by PP /NYLON / HDPE material. Foundation stool: Made from main pipe Ø 88 mm OD M.S pipe and top support of M.S. round plate of Ø 250 mm & 8 mm thickness is welded top. Square tube of 30 x 30 x 2 mm must be used to support center pipe. Height of stool is 3 ft. Foundation stool is embedded in C.C. stock below ground level. Bearing - Use is 6005 permanent lubricated reputed brands. Pin – Made up of Ø 25 mm M.S. bright bar pin. Bearing bushes - Ø 60 mm OD seamless pipe. Grips - High quality rubber Ø 46 mm OD. Circlips–A 24 circlips are used for assembly. Coating - best quality of powder coating 80-120 micron. Safety Instructions and Exercise chart - start & finish position stick on product. All joints must be welded as per IS standards and zinc primer paint should be applied at all the welding points prior to finishing 3 od241626/2024_2025 : Cross Trainer (Double) - Supply and Installation of Double Cross Trainer having the following specifications: Dimensions: (L X W X H) 2280 x 550 x 1650 mm. Main frame- Made of Ø 88 mm OD “B” class GI pipe dually bending design. Foundation plate – M.S. round plate of Ø 250 mm & 8 mm thick. Paddle vertical support - Ø 42 mm OD “B” Class GI pipe. Handle - Ø 33 mm OD “B” Class GI pipe dually bending design. Leg movement frame – 50 mm x 50 mm x 2 mm thick square pipe. Footrest - cast iron 124 x 296 x 5 mm thick and M.S. plate of 2 mm thick use for to support it. Top Closing cap – dome shape made by PP / NYLON / HDPE material. Closing cap’s– PP / NYLON / HDPE material. Foundation stool: Made from main pipe Ø 88 mm OD B class G.I. pipe. and top support of M.S. round plate of Ø 250 mm & 8 mm thickness is welded top. Square tube of 30 x 30 x 2 mm must be used to support center pipe. Height of stool is 3 ft. Foundation stool is embedded in C.C. stock below ground level. Grips - High quality rubber. Bearing- Use is 6005 permanent lubricated reputed brand. Bearing bushes - Ø 60mm OD seamless pipe. Pin –Made of Ø 25mm M.S. bright bar. Circlips – A 24 circlips are used for assembly. Coating - best quality of powder coating 80-100 micron. Safety Instructions and Exercise chart - start & finish position stick on product. All joints must be welded as per IS standards and zinc primer paint should be applied at all the welding points prior to finishing. 4 od241627/2024_2025 : Horse Rider - Supply and Installation of Horse Rider having the following specifications: Dimensions: (L XW X H) 1140 x 400 x 1400 mm. Main frame - Ø 114 mm OD “B” class GI pipe. Foundation plate – M.S. round plate of Ø 250 mm & 8 mm thick. Foundation cover cap - dome shape of PP / NYLON / HDPE material. Remaining frame – Is made by Ø 48 mm OD “B” class GI pipe. Seat frame – Is made by Ø 48 mm OD “B” class GI pipe. Seat position must be horizontal to 110 -120 degree. Link - made up of Ø 48 mm OD “B” Class G.I. pipe. Angle between link and ground position is 10-20 degree. Handle - Ø 33 mm OD “B” Class GI pipe. Paddle vertical support - Ø 60 mm OD “B” Class GI pipe. Handle frame- Ø 42 mm OD “B” Class GI pipe dually bending design. Foot pipe - Ø 33 mm OD “B” Class GI pipe. Support frame –10 mm thick MS flat is used. Seat- Dimension 320 x 270 x 100 mm blow moulded wall thickness 4mm material HDPE. Bearing bush closing cap – PP / NYLON / HDPE material. Foundation stool: Made from main pipe Ø 88 mm OD M.S pipe and top support of M.S. round plate of Ø 250 mm & 8 mm thickness is welded at top. Square tube of 30 x 30 x 2 mm must be used to support center pipe. Height of stool is 3 ft. Foundation stool is embedded in C.C. stock below ground level. Bearing - Use is 6005 permanent lubricated reputed brand. Bearing bushes - Ø 60mm OD seamless pipe. Pin – Made of Ø 25 mm M.S.bright bar. Grips - High quality rubber Ø 46 mm OD. Circlips – A 24 circlips are used for assembly. Coating - best quality of powder coating 60 to 70 micron. Safety Instructions and Exercise chart - start & finish position stick on product. All joints must be welded as per IS standards and zinc primer paint should be applied at all the welding points prior to finishing. 5 od241658/2024_2025 : Back Extension - Supply and Installation of Back Extension having the following specifications: Dimensions: (L X W X H) 1060 x 730 x 990 mm. Main frame - Made from 88 mm OD Class G.I. pipe. Foundation plate – M.S. round plate 250 mm and 8 mm thick. Leg Support -42 mm OD G.I Pipe. Seat rest pipe42 mm OD Class G.I Pipe. Handle pipe 33 mm ODClass G.I Pipe.Footrest - Cast iron 124 x 296 x 5 mm thick and M.S plate of 3 mm thick used to support it. Footrest pipe 42 mm ODClass G.I Pipe and 80 x 40 mm MS rectangular pipe. Closing capPP / NYLON / HDPEmaterial. Seat360 x 300 x 2 mm thick M.S. seat with corner fillet for safety. Grips -High quality rubber 46mm OD. Foundation stool: Made from main pipe 88 mm OD M.S pipe and top support of M.S. round plate of 250 mm8 mm thickness is welded top. Square tube of 30 x 30 x 2 mm must be used to support center pipe. Height of stool is 3 ft. Foundation stool is embedded in C.C. stock below ground level Coating - best quality of powder coating 80-120 micron. Safety Instructions and Exercise chart - start and finish position stick on product. All joints must be welded and zinc primer paint should be applied at all the welding points prior to finishing 6 od241628/2024_2025 : Sky Walker - Supply and Installation of Sky Walker having the following specifications: Dimensions: (L XW X H) 1720 x 910 x 1700 mm. Main frame - Made of Ø 88 mm OD “B” class GI pipe dually bending design. Foundation plate – M.S. round plate of Ø 250 mm & 8 mm thick. Paddle vertical support - Ø 42 mm OD “B” Class GI pipe. Handle - Ø 33 mm OD “B” Class GI pipe dually bending design. Leg movement frame – 50 mm x 50 mm x 2 mm thick square pipe. Footrest - cast iron 124 x 296 x 5 mm thick and M.S. plate of 2 mm thick use for to support it. Top Closing cap – dome shape made by PP / NYLON /HDPE material. Closing cap’s– PP / NYLON / HDPE material. Foundation stool: Made from main pipe Ø 88 mm M.S pipe. and top support of M.S. round plate of Ø 250 mm & 8 mm thickness is welded top. Square tube of 30 x 30 x 2 mm must be used to support center pipe. Height of stool is 3 ft. Foundation stool is embedded in C.C. stock below ground level. Grips - High quality rubber Ø 46 mm OD. BearingUse is 6005 permanent lubricated reputed brand. Bearing bushes - Ø 60 mm OD seamless pipe. Pin–Made of Ø 25mm M.S. bright bar. Circlips – A 24 circlips are used for assembly. Coating - best quality of powder coating 80-120 micron. Safety Instructions and Exercise chart - start & finish position stick on product. All joints must be welded as per IS standards and zinc primer paint should be applied at all the welding 8 points prior to finishing 7 od241629/2024_2025 : Rower - Supply and Installation of Rower having the following specifications: Dimensions: (L X W X H) =1472 x 915 x 1040 mm. Upper and bottom pipes - Ø 88 mm OD “B” Class GI pipe. Foundation plate –M.S. round plate of Ø 250 mm & 8 mm thick. Handle - Ø 33 mm OD “B” Class G.I pipe. Angle between handle and horizontal surface is 75 - 80 degree. Linkages – Ø 48 mm OD “B” Class G.I. pipe. Seat & back rest – 380 x 275 x 60mm thick high-density polyethylene (HDPE) blow molded with M10 in-sert wall thickness 3 to 4 mm. Foot resting pipe - Ø 60 mm OD “B” Class G.I. pipe. End Closing cap – dome shape made by PP / NYLON / HDPE material. Closing caps – PP / NYLON / HDPE material. Foundation stool: Made from main pipe Ø 88 mm OD M.S pipe and top support of M.S. round plate of Ø250 mm & 8mm thickness is welded at top. Square tube of 30 x 30 x 2 mm must be used to support center pipe. Height of stool is 3 ft. Foundation stool is embedded in C.C. stock below ground level. Pin – Ø 25 mm M.S. bright 5 bar pin. Circlips– A 24 circlips are used for assembly. Bearing bushes - Ø 60 mm OD seamless pipe /Bar. Bearing- use is 6005 permanent lubricated reputed brands. Grips – high quality rubber 46 mm OD. Coating - best quality of powder coating 80 -120 micron. Safety Instructions and Exercise chart - start &<br>finish position stick on product. All joints must be welded as per IS standards and zinc primer paint should be applied at all the welding points prior to finishing.<br> 8 od241630/2024_2025 : Leg Press (Double) -Supply and Installation of Double Leg Press having the following specifications: Dimensions: (L X W X H) = 1676 x 400 x1500 mm. Main frame - Ø 114 mm OD “B” class GI pipe. Foundation plate – M.S. round plate of Ø 250 mm & 8 mm thick. Foundations cover cap - dome shape of PP / NYLON / HDPE material. Link - is Ø 60 mm OD “B” Class GI pipe. Seat frame - Ø 42 mm OD “B” Class GI pipe. Leg Press back rest should be angled in 120 -130 degree. Foot rest - cast iron 124 x 296 x 5 mm thick and M.S plate of 2 mm thick use to support it. Seat & back rest – 380 x 275 x 60 mm thick high-density polyethylene (HDPE) blow molded with M10 in-sert wall thickness 3 to 4 mm. Link connected with frame by 8 mm thick laser cutting MS profile. Top Closing cap – dome shape made by PP/ NYLON / HDPE material. Closing cap’s- PP / NYLON / HDPE material. Foundation stool: Made from main pipe Ø 88 mm OD M.S pipe and top support of M.S. round plate of Ø 250 mm & 8 mm thickness is welded at top. Square tube of 30 x 30 x 2 mm must be used to support center pipe. Height of stool is 3 ft. Foundation stool is embedded in C.C. stock below ground level. Bearing- use is 6005 permanent lubricated reputed brand. Pin– Ø 25 mm M.S. bright bar pin. Bearing bushes - Ø 60 mm OD seamless pipe. Circlip– A 24 circlips are used for assembly. Coating - best quality of powder coating 80 -120 micron. Safety Instructions and Exercise chart - start & finish position stick on product. All joints must be welded as per IS standards and zinc primer paint should be applied at all the welding points prior to finishing.<br> 9 od241631/2024_2025 : Triple Twister - Supply and Installation of Triple Twister (Standing position - 2 and Seating position - 1) having the following specifications: Dimensions: (L X W X H) 1500 x 1500 x 1420 mm. Main frame – Ø 114 mm OD “B” class GI pipe. Foundation plate – M.S. round plate of Ø 250 mm & 8 mm thick. Seat plate support – Ø 60 mm OD “B” Class G.I Pipe. Seating ring - Ø 33 mm OD “B” Class G.I Pipe made by rolling. Seating ring support - Ø 33 mm OD “B” Class G.I Pipe. Remaining frame – Is made by 100 x 50 x 2.5 mm rectangular pipe. Standing plate- Ø 300 mm OD X 10 mm thick M.S. plate. Seating plate- Ø 300 mm OD X 10 mm thick M.S. plate. Seating seat position and other two standing position plates are fixed 120 degrees each from other. Handle – Ø 33 mm “B” Class G.I. Pipe made by rolling. Top Closing cap –Dome shape made by PP / NYLON / HDPE material. Foundation stool: Made from main pipe Ø 88 mm OD M.S pipe and top support of M.S. round plate of Ø 250 mm & 8 mm thickness is welded top. Square tube of 30 x 30 x 2 mm must be used to support center pipe. Height of stool is 3 ft. Foundation stool is embedded in C.C. stock below ground level. Bearing - Used is 6005 permanent lubricated reputed brand. Bearing bushes - Ø 60 mm OD seamless pipe. Pin – Made up of Ø 25mm M.S. bright bar. Circlips– A 24 circlips are used for assembly. Coating - best quality of powder coating 80 -120 micron. Safety Instructions and Exercise chart - start & finish position stick on product. All joints must be welded as per IS standards and zinc primer paint should be applied at all the welding points prior to finishing. 10 od241632/2024_2025 : Shoulder Builder (Double) - Supply and Installation of Double Shoulder Builder having the following specifications: Dimensions: (L X W X H) 890 x 558 x 1500 mm. Main frame - Made from Ø 114 mm OD “B” Class G.I. pipe. Foundation plate –M.S. round plate of Ø 250 mm & 8 mm thick. Foundation cover cap- dome shape of PP / NYLON / HDPE material. Shoulder ring pipe - Ø 33 mm OD “B” Class G.I Pipe. Shoulder ring pipe support – Ø 25 mm OD “B” Class G.I Pipe. Nylon knob with Bearing – Is fixed on shoulder ring pipe for rotating purpose (2 set to be fixed in a position for kids and adults). Top Closing cap’s- PP / NYLON / HDPE material. Closing cap – PP / NYLON / HDPE material. Foundation stool: Made from main pipe Ø 88 mm OD M.S pipe and top support of M.S. round plate of Ø 250 mm & 8 mm thickness is welded at top. Square tube of 30 x 30 x 2 mm must be used to support center pipe. Height of stool is 3 ft. Foundation stool is embedded in C.C. stock below ground level. Bearing - Use is 6005 permanent lubricated reputed brands. Pin – Ø 25 mm M.S. bright bar pin. Foundation plate – M.S. roundplate of Ø 250 mm & 8 mm thick. Bearing bushes - Ø 60 mm OD seamless pipe. Circlips – A 24 circlips are used for assembly. Coating - best quality of powder coating 80 -120 micron. Safety Instructions and Exercise chart - start & finish position stick on product. All joints must be welded as per IS standards and zinc primer paint should be applied at all the welding points prior to finishing. 11 od241633/2024_2025 : Air Walker - Supply and Installation of Air Walker having the following specifications: Dimensions: (L X W X H) 1190 x380 x 1244 mm. Main Frame- Ø 88 mm OD “B” class GI pipe dually bending design. Foundation plate –M.S. round plate of Ø 250 mm & 8 mm thick. Paddle– Ø 42 mm OD round GI pipe. Handle – Ø 33 mm OD “B” class GI pipe. Footrest - cast iron 124 x 296 x 5 mm thick and M.S. plate of 2 mm thick use to support it. Top Closing cap – dome shape made by PP / NYLON / HDPE material. Closing cap’s - PP / NYLON / HDPE material. Bracket - 8 mm thick laser profile is use to support paddle frame. Foundation stool: Made from main pipe Ø 88 mm OD M.S pipe and top support of M.S. round plate of Ø 250 mm & 8 mm thickness is welded top. Square tube of 30 x 30 x 2 mm must be used to support center pipe. Height of stool is 3 ft. Foundation stool is embedded in C.C. stock below ground level. Bearing- use is 6005 permanent lubricated reputed brands. Pin’s – Ø 25mm M.S. bright bar pin. Circlips– A 24 circlips are used for assembly. Bearing bushes -Ø 60 mm OD seamless pipe. Coating - best quality of powder coating 80-120 micron. Safety Instructions and Exercise chart - start & finish position stick on product. All joints must be welded as per IS standards and zinc primer paint should be applied at all the welding points prior to finishing.<br> 12 od13634/2025_2026 : Ball Bag : Supply of Ball bag of Brand: Ospo, 2 Side Mesh Panel made with 600x 600D<br> Polyster Fabric. Suitable for 15 Size 5<br>Footballs Size: 39” x 19” 13 od13635/2025_2026 : Cones 9 Inch- Supply of 9 cones made of plastic available in assorted colours Brand: Vinex, Nivia, Cosco or similar make 14 od13636/2025_2026 : Cricket bat- Supply of Cricket bat, Champion Kashmir Willow Bat made of Kashmir<br>Willow. Handle covered with high quality rubber grip & concave edges for better stability, comes with full<br>length cover. 15 od13637/2025_2026 : Air Pump- Supply of Air Pump having the following specifications: Single cylinder, weight approx. 1.8kg with pressure gauge, Brand: Raj cycle or similar make 16 Kids Play equipment (18% GST) 17 od241846/2024_2025 : 2 seater kids swing - Supply and fixing 2 seater kids swing 50mm medium class GI pipe of 4 nos leg , supporting members of 6mm chain,10mm hanger hook with good quality FRP fiber seat of minimum size 25x25cm. GI swing chain of 10mm diameter, plan area is 1.8 x 1.5 metre,height 1.8 metre Cost inclusive of loading, unloading, transportation, erection, fixing charges, labour and material charges etc. complete 18 od241847/2024_2025 : 4 leg Rope and Foot climber - Supply and fixing 4 leg Rope and Foot climber LLLDP rock climber with LLLDP ball.One inch premium quality nylon rope with holder and good quality FRP Sheet, plan area is 1.5 x 1.5 metre, height 1.8 metre Cost inclusive of loading, unloading, transportation, erection, fixing charges, labour and material charges etc. complete 19 od241848/2024_2025 : Single play station - Supply and fixing Single play station with double swing and slider 65 mm medium GI 4 leg , 50mm medium GI 2 leg , 25mm and 20mm GI medium supporting members good quality FRP single mini slide of 2.1m, good quality FRP umberella of size (1x1) meter size, good quality FRP platform of size (1x1) meter size, 25mm medium GI ladder,FRP Sheet good quality LLDP rock holder wall climber.50mm x25mm GI Frame,seat belt and 6mm chain with plastic coating.plan area is 4.5m x 4.5m,height 3 metre Cost inclusive of loading, unloading, transportation, erection, fixing charges, labour and material charges etc. complete<br> 20 od241849/2024_2025 : Jurassic slide - Supply and fixing Jurassic Slide Provided with good quality FRP fiber withJurassic body shape.Ladder support made up of 20mm GI pipe.Slide length 0.9 metre. plan area is 2.4 x 1.05 metre, height 1.7 metre Cost inclusive of loading, unloading, transportation, erection, fixing charges, labour 21 od241850/2024_2025 : Rocker Spring duck - Supply and fixing Rocker Spring duck Provided with 50mm medium class as main shaft GI, 10mm MS spring,6mm MS Plate with good quality. FRP Duck body. Plan area is 0.6 x 0.6 metre, height 0.75 metre Cost inclusive of loading, unloading, transportation, erection, fixing charges, labour and material charges etc. complete 22 od241851/2024_2025 : SEE SAW 4 seated Large - Supply and fixing SEE SAW 4 seated Large Provided with 65mm medium GI pipe of 2 leg with handle of medium GI 20mm. Seat of minimum size 25cm x25 cm made up of good quality FRP fiber plan area is 1.8x 1.8 metre,height 0.35 metre. Cost inclusive of loading, unloading, transportation, erection, fixing charges, labour and material charges etc. complete 23 od241852/2024_2025 : SEE SAW 4 seated Medium - Supply and fixing SEE SAW 4 seated Medium Provided with 50mm medium GI pipe of 2 leg with handle made up of medium GI 20mm. Seat of minimum size 25cm x25 cm made up of good quality FRP fiber plan area is 1.8 x 1.8 metre,height 0.35 metre Cost inclusive of loading, unloading, transportation, erection, fixing charges, labour and material charges etc. complete 24 od241853/2024_2025 : Merry go 6 seat fixing - Supply and fixing Merry go 6 seat fixing Provided with 40mm Main shaft MS rad single leg with bearing. supporting membe rs of GI 25 & 20mm GI medium class. Seat size of minimum size 25cm x25 cm made up of good quality FRP fiber plan area is 0.6m^2,height 0.35 metre Cost inclusive of loading, unloading, transportation, erection, fixing charges, labour and material charges etc. complete 25 od241854/2024_2025 : 4 seater Circular swing - Supply and fixing 4 seater Circular swing 60mm medium class GI pipe of 4Nos of leg, supporting members of 25mm,20 mm medium calss GI pipe,good quality. FRP seat of minimum size 25x25cm plan area is 2.1 x 1.5 metre,height 2.1 metre Cost inclusive of loading, unloading, transportation, erection, fixing charges, labour & material charges etc. complete 26 od241855/2024_2025 : 6 legged Sky round climber - Supply and fixing 6 legged Sky round climber 60mm medium GI 4 main leg. 40mm medium GI 2 leg additional support with 25, 20mm medium class supporting members Plan area is 3m^2 diameter,height of 2.4 metre.Includes both side ladder. Cost inclusive of loading, unloading, transportation, erection, fixing charges, labour and material charges etc. complete 27 od241861/2024_2025 : 4 legged balancing walker - Supply and fixing 4 legged balancing walker Frame made up of 50mm in medium class GI pipe with good quality FRP foot strip 10mm GI hanging Chain, Plan area is 2.1 metre x 0.90 metre minimum,height 0.9 metre. Cost inclusive of loading, unloading, transportation, erection, fixing charges, labour and material charges etc. complete 28 Sports equipment (12% GST) 29 od241643/2024_2025 : Supply of Volleyball - Brand: Cosco or similar make , Model: Super Volley<br>Genuine Leather Pasted or similar make 30 od241644/2024_2025 : Supply of Football - Brand: Nivia or similar make , Model: Shining Star or similar make 31 od241877/2024_2025 : Supply of Adjustable Basketball Pole - Brand: OSPO or similar makeSize: Small Material: HDPE, Age Group: 3+ 32 od241879/2024_2025 : Supply of Tennis Ball (Cosco, Famous, Sj or similar make).
