Tender For Construction Of Public Toilet At Sitadhungay Samaj Ghar.
Tender Value
1.50 Lakhs
Estimated cost
Bid Submission
02 Jun 2025
0 days left
EMD
3001
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
gorubathan → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Public Toilet At Sitadhungay Samaj Ghar.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation trenches or drains in all sorts of soil (including mixed soil but excluding laterite or sand stone) including removing, spreading or stacking the spoils within a lead of 75m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. (a) Depth of excavation not exceeding 1.500 mm. |
| 2 | Earthwork in filling in foundation trenches or plinth with good ….etc….etc. with earth obtained from excavation |
| 3 | Laying 150 mm. to 200 mm. boulder soling including rough dressing hand packing and ramming down small pieces in the interstics without rolling but including ramming. |
| 4 | Cost of stone boulder 150 mm size delivered ans stacked at site. |
| 5 | Ordinary cement concrete(mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttring and reinforcement, if any, in ground floor as per relevant IS codes. (b) River bazree. |
| 6 | Hire and labour charge for shuttering with centreing and necessary staging up to 4 m. using approved stout props and thick hard wood planks of approved thick ness with required bracing for concrete slabs, beams, columns, lintels curved or staight including fitting fixing and striking out after complection of works. (up to roof of ground floor). (a) 25 mm. to 30 mm. thick wooden shuttering as per decision & direction of the Engineer-in-charge. |
| 7 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc.initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at inter-section, complete as per drawing and direction. (a) For works in foundation, basement and up to roof of ground floor/up to 4m. Tor steel/Mild steel. other than SAIL/TATA/RINL/JSW/JSPL/Shyam/SRMB/ISSL/BMASL/Electrosteel |
| 8 | Galvanised corrugated iron sheet work (excluding the |
| 9 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4). a) In ground floor. |
| 10 | Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting .trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, SValamoid/Bitumen/M-Seal etc) complete.SOIL PIPE |
| 11 | Plaster ( to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering conrners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (ground floor). [Excluding cost of chipping over concrete surface]. (i) with 1:6 cement mortar. (a) 15 mm. thick plaster. |
| 12 | Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frameexluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be corrected upto three decimals). |
| 13 | Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frameexluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be corrected upto three decimals). |
| 14 | Z-batten shutters of door and window as per design havings tongued and groovehalf lap jointed as per direction of the Engineer-in-Charge including fitting and fixing shutter |
| 15 | Supplying fitting and fixing M.S clamps for fixing door and windows frame made of flat bent bar, end bifurcated fixed in cement concrete with stone chips(4:2:1) fitted fixe |
| 16 | Anodised aluminium barrel/tower/socket bolt (full covered) …. |
| 17 | Anodised alumunium Aldrop/Sliding bolts of approved quality …fitted and fixed complete. |
| 18 | Anodised alumunium butt hinges of approved quality fitted and fixed with cadmium plated screws. |
| 19 | Anodised alumunium D type handle of approved quality…fitted & fixed complete. |
| 20 | Plum concrete work wit 40% cement concrete with 30 mm down graded stone metal and 60% stone boulder of size 150mm and above, placed in position as directed excluding shuttering if any. (1:3:6) proportion. |
| 21 | Supplying, fitting and fixing Orissa pattern water closet in white glazed |
| 22 | Dry Rubble Masonry with hard dressed stone from approved quarries |
| 23 | Supplying, fitting and fixing CPVC (Chlorinated PolyvinylChloride) pipes of approved make conforming to IS-15778:2007 . with all necessary accessories, specials viz. socket,bend, tee, union, cross, elbo, nipple, longscrew, reducingsocket, reducing tee, short piece etc. fitted with holder batsclamps, including cutting pipes, fitting, fixing etc. completein all respect including cost of all necessary fittings asrequired,jointing materials in any position above ground.(Payment will be made on the centre line measurements oftotal pipe line including all specials. No separate paymentwill be made for accesories, specials.(a) For Exposed Work(i) CPVC Pipes Class-I,SDR-11. a)20 mm dia |
| 24 | Supplying, fitting and fixing G.I gravity operated water tap for public use with pilfer proof arrangement of approved brand and make. |
| 25 | Supplying, fitting and fixing Foot rest for water closet of size 275 mm X 125 mm with |
| 26 | GST @ 18% |
| 27 | Labour Cess @ 1 % including GST |
AI Tender Summary
Tender Timeline
May 26, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedJun 02, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 04, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender