Tender For Certain Minor And Revenue Works At Mil Stn Sgnr; 1 Excavation in trenches not exceeding 1.5 Mtr wide and not exceeding 1.50 Mtr in depth for foundation, etc., not exceeding 10 Sqm on plan in soft /loose soil; & getting out complete all as specified and directed. 2 M&L for PCCas in foundation type D-2, 1:4:8 (40mm graded stone aggregate) complete all as specified and directed. 3 M&L for Reinforced Cement concrete (design mix) M-25 using 20mm graded aggregate in foundations, footings,plinth beams etc complete all as specified and directed. 4 M&L for Reinforced Cement concrete (design mix) M-25 in columns, pillars, piers, posts and struts complete all as specified and directed. 5 M&L for providing reinforcement cement concrete, M-25 (using 20mm graded stoneagg) as in beams, cantilevers, bressumers, lintel over 1.5m span complete all as specified and directed. 6 M&L for providing reinforcement cement concrete in M-25 (using 20mm graded stoneagg) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. 7 M&L for providing reinforcement cement concrete, M-25 (using 20mm graded stoneagg) as in Chajja complete all as specified and directed. 8 M&L TMTbars as in reinforcement 10 mm dia and over cut to length bent to shape required incl cranking bending spirally for hooping for cols, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia using TMT bars complete all as specified and directed. 9 M/L for TMT bar 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed. 10 S&F mild steel TMT bars 6 to 8 mm dia , cut to length, bent to shape requred, including crancingbending and binding with mild steel (anneal) wire not less than 0.90mm dia complete all as specified and directed. 11 Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams;and similar work; vertical or to better for flatrough finished surface of concrete complete all as specified and directed. 12 Formwork to sides of pillars, posts, struts, piers, columns and stanchions for square, rectangular or polygonal rough finished surface complete all as specified and directed. 13 Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. rough finished surface complete all as specified and directed. 14 Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) in rough finished surface complete all as specified and directed. 15 Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 in rough finished surface complete all as specified and directed. 16 Form work flat rough finished surfaces of concrete to Chullah hood Chajja, troughs and similar items including edges complete all as specified and directed. 17 Damp Proof course, 40mm thick in PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate to horizontal or vertical surfaces including mixed with water proofing compound as per manufacture instructions including necessary form work complete all as specified and directed.NOTE : Supply only WPC to be measured and paid separately. 18 Supply only integral water proofing compound ISI marked complete all as specified and directed. 19 M&L brick work with Fly Ash old sizebricks straight or curved on plan exceeding 6.0m mean radius built in cement mortar 1:6 complete all as specified and directed. 20 M&L brick work with Burnt clay sub class old size ‘B’bricks straight or curved on plan exceeding 6.0m mean radius built in cement mortar 1:6 complete all as specified and directed. 21 M&L brick work with Fly Ash old sizebricks straight or curved on plan exceeding 6.0m mean radius in half brick thick walls built in cement mortar 1:6 complete all as specified and directed. 22 M&L for Rendering 15mm thick in CM 1:4 in two layers (1st layer 10mm th and 2nd layer 5mm th with Water proofing compound) on other than fair faces of brick work finished even and smooth without using extra cement complete all as specified and direceted. 23 M&L 15mm plaster in CM 1:3 while the concrete is green with approved water proofing compound in proportion as recommended by the manufacturer (Waterproofing compound measured and paid saperately).complete all as specified and directed. 24 M&L rendering 15mm thickin CM 1:6 on faces of brick work or conc work finished even & smooth w/o using extra cement complete all as specified and directed. 25 M&L 5mm thick rendering in CM 1:3 to brick / concretesurface of ceilling surfaces finished even & smooth without using extra cement complete all as specified and directed. 26 M&L three coat of white wash on new plastered surface of wall including preparation of surface complete all as specified and directed. 27 M & L Preparation of new plastered surfaces of wall and applying two coats of cement base paint over 1 to 1.50 mm thick wall putty over one coat of alkali resistantprimer complete all as specified and directed. 28 M&L for three coat of white wash on ceiling on new plastered surface including prepration complete all as specified and directed. 29 M&L hardcore of gauge n exc 63 mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed. (Broken Bricks) 30 S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of but of Frame size 65x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed.(M.S. hold fast/ lugs or SS dash fasteners shall be not be paidseparately) Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. 31 Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with 100mm size stainless steel butt hinges of medium grade with necessary full body threaded star headed counter sunk S.S screws including 03 x 100 mm long SS butt hinges, 02 x 150 mm long SS handles and 02 x 150 m long SS barrel tower bolts complete all as specified and directed. 32 S&F Factory made 30 mm thick 100 % solid WPC (Wood Polymer Composite) Laminated Flush Door size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note:Including 125 mm SS hinges with stainless steel screws (03 Nos ), 200 mm longStainless steel tower bolt (02 Nos) and 300mm long Stainless steel sliding bolt (01/02 Nos) & Stainless steel handles (02 Nos) 33 S&FAluminium frame for doors, window, ventilatorswith one or more rebates including joining cleat for fixing including sliding chennals etc complete with powder coating on Aluminium minium thickness of powder coating 50 micron as per the specification the top and bottom horizontal members and vertical members adjacent walls shall be fixed with floor, ceiling walls and cills where required and fixing with the help of rawal plug and screw or with fixing clip or with expansion hold plate fasteners . Aluminium section shall be smooth, rust free, straight mitred and jointed mechanically where ever required all complete as per the direction of Engineer-in-charge 34 S&F powder coated aluminiumwindowsand ventilator shutters,side hung type, without sash bars aluminium saction weighing 0.55 kg/RM including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fitting such as peg stay 150mm long (1 no) hinges type B21 100 mm long (2 No) suitable handle (1No) including aluminium grill and wire mesh complete all as specified and directed. 35 M&L steel window /ventilator with top hung shutter including hinges steel peg stay ccomplete all as specified and directed. 36 M & L for 40mm thick cement concrete type B-1, 1:2:4 using 20mm graged aggregate as in flooring , finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed. 37 M&L75 mm thick cement concrete type D2, 1:4:8 (Using 40mm graded stone aggregate)filling sub base as in floors, paving, sub floor etc finished even and smoothcomplete all as specified and directed. 38 M&L providing cement concrete 1:4:8 type D2 (Using 40mm graded stone agg) , 100mm thick asin sub base in floor/paving etc complete all as specified and directed.. 39 M&L for premium quality non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floor etc set and jointed in cement slurry and pointed in white cement mixed with epoxy grout to match the shade of tiles including 15 mm thick screed in CM 1:4 including dismantling existing tiles complete all as specified and directed. 40 M&L 300x600x7/450x350x7 mm thick glazed ceramic coloured tiles as in vertical sufaces such as skirting or dado set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles and incliding 10mm thick backing coat in CM 1:4. including dismantling existing tiles complete all as specified and directed. 41 M&L glazed ceramic coloured tiles, (600x300x7mm size in vertical surfaceset & jointed in neat cement slurry and pointed in epoxy grout to match the shade of tile including 10 mm thick rendering in 1:3 CMcomplete all as specified and directed. 42 M&L for Vitrified Ceramic tiles double charged 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed in CM 1:6 including dismantling existing tiles complete all as specified and directed. 43 M&L for light shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed in CM 1:6 complete all as specified and as directed. 44 M&L for 75 mm thick PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate as inplinth protection surface finished fair and evencomplete all as specified and directed by Engineer-in-Charge. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3) complete all as specified and as directed. 45 S&F 500 ltr, 3 layered, premium quality white coloured Rotaional PVC water storage tank cylinerical hoisted and fixed in posn complete all as specified and directed. 46 S&F steel water tubing galvanised 20mm bore, medium grade with all fittings fixed to wall and ceiling or in floor complete all as specified and directed. 47 S&F steel water tubing galvanised 15 mm bore, medium grade with all fittings fixed to wall and ceiling or in floor complete all as specified and directed. 48 S&F 15mm bore dia fancy type bib taps chromium plated (CP) alloy with quarter turn type handles, screwed down complete all as specified and directed. 49 S&Fin repairs chromium plated 15mm bib taps (half/quarter turn) cast copper alloy, chromium platedfency type with crutch or butterfly handle screwed down screwed for Iron pipe or for brass ferrule and fixed complete all as specified and directed. 50 S&F, 20 mm bore stop valves, cast copper (CP) along screwed down high pressure with crutch and butterfly handles renewed both ends complete all as specified and directed. 51 S&F, 15mm bore stop valves, chromium plated (CP) along screwed down high pressure with crutch and butterfly handles renewed both ends complete all as specified and directed. 52 S&F in repair chromium plated stop valves, cast copper alloy 15 mm bore screwed down high pressure with crutch or butter fly handle for iron pipe or for union and complete all as specified and directed. 53 S&F in repair chromium plated Angle stop valves, cast copper alloy 15 mm bore screwed down high pressure with crutch or butter fly handle for iron pipe or for union and complete all as specified and directed. 54 Supply and fixing ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed for bore dia of pipe 20mm.complete all as specified and directed. 55 S&F PVC Connection 15mm size with PTMT nuts of length 450 mm complete all as specified and directed. 56 S&F water closet vitreous china squatting pan Orrisa pattern size 580mmx440mm white with integral foot rests (Excl flushing cistern) complete all as specified including PVC (SWR) P/S trap complete all as specified and directed. 57 S&F PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float and handle including brackts all as specified and directed (10 ltr capacity) complete all as specified and directed. 58 S&F vitreous china wash hand basin, white flat back of size 550mmx400mm including brackets, 32mm bore brass chromimum plated waste coupling & 32mm bore low density ployethylene (LDPE) flush pipe of pressure rating 6Kgf/Sq cm (1.00 M long) complete, including 15mm cast copper alloy chromium plated basin mixer, 15mm bore 300mm length PVC connection with PTMT nuts and 75mm PVC (SWR) floor trap complete all as specified and directed. 59 S&F frameless 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. 60 S&F Tubular towel rail, 20 mm dia. D type, 60 cm long between flanges Brass Chromium plated/Stainless steel complete all as specified and directed. 61 S&F, 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/laid in floor/trenches complete all as specified and directed. 62 M&L for 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/laid in floor/trenches complete all as specified and directed. 63 M&L for 110mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. 64 M&L for 75mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. 65 M&L for 75/110mm PVC (SWR) vent Cowl complete all as specified complete all as specified and directed. 66 S&F Vitreous China Urinals, full size stall type ( back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 , securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. Including of fixing supply pipe to flushing , trap and waste pipe with CP Urinal spreader fixing with 15mm diapipe and PVC (SWR) Floor/Gully traap complete all as specified and directed. 67 M&L granite (Jet black)work 16 mm thick(table rubbedand polished) in partition including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. 68 M&L granite (of any type) work18 to 20 mm thick(table rubbedand polished) in steps, jambs, pillars, window-cills, cooking platforms, hand wash platform and like laid over and including 12 mm thick cement mortar 1:4including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. 69 DWCPE(SN8) 100mm nominal dia pipes as per IS-16098 (Part-II) laid in trenches on and including 100 mm thick bed comprising of well compacted clean poorly graded garvel/sand mixture with little/ no fines to require slope, Includes all accesories/fittings/jointing ring, jointing and testing complete all as specified and directed. 70 M&L pre-cast cover slab for 65mm thicknesstype B1 (1:2:4) using 20mm graded aggregate complete all as specified and directed. 71 M&L Cutting for 150 mm pipe into existing manhole for connecting new drain making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required complete all as specified and directed. 72 S&F 3.00mm thick sheet glass, ordinary quality pin head type and glazing with oil putty in squares not exceeding 0.50 sqm each pane complete all as specified and directed. 73 S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and directed. 74 S & F for SS soap dish 100mm dia round or oval fixed to walls or dados complete all as specified and directed. 75 S & F 75mm/110mm PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and directed. 76 Returning, filling in, including spreading, leveling, watering and well ramming in soft/loose soil in layer not exceeding 25 cm thick complete all as specified and directed. 77 Removal of excavated material to a distance not exceeding 50m and deposited where directed at level not exceeding 1.5m above the starting point complete all as specified and directed. 78 M&L for30 cm x 30 cm x 20 mm thick Heavy duty, high traffic tiles chequered/pattern as specified set jointed and pointed in neat cement slurry in floors with grey cement including 15mm thick screed in CM 1:6 withpigments complete all as specified and directed. 79 M&L providing precast cement concrete in PCC (1:2:4) type B-1 with 20 mm graded aggregate for kerb stone and similar works with plain fair finishes including chamfers, weatherings, throat- ing etc. and setting in mortar (1:4), necessary demoation included in quoted rates by contractor complete with joints to match all as specified. 80 M&L for Roof treatment to RCC roofas follows :- (a) Dismantling of brick tiles or terracing tiles single layer on roofincludingmud phuska also taking down existing APP membrane & disposal of retrieved material upto a distance n.exc 100m where directed (b) Cleaning the roof surfaces thoroughly using wire brushes to remove and apply 15mm th plaster in CM 1:3 with WPC (c) After min curing period to plaster work preparation of roof top surfaces, providing and applying single component a fibre reinforced elastomeric liquid applied as waterproofing membrane formulated with PU hybrid polymers and reinforcing acrylic fibres and having Sun reflective index (SR) of 106 on top of concrete roof surfaces in three coat including self primer at ratio of elastomeric liquid and water as per manufacturers instruction and coverage @1 Ltr/10 Sqm with a thickness of 650 micron, Cracks should be filled with cack sealants, the vital physical and chemical parameters shall be as under Min Elongation at break of 350%, Results positive hydrostatic pressure of upto 10 bars, crack bridging ability of 2.5mm at 650 microns. The materials shall be applied with brush or roller, complete in all respect as per the direction of Engineer-in-Charge/Consultant.Note : (a) 06 Hrs interval between two coats will be maintain and the work will be carried out incorporation and will be paid only after receiving of the Waranty Certificate from the Company).(b) The guarantee of treatment shall be for minimum 10 years reckoned from date of completion of whole work 81 Dismantling of sub class B brick old size work built in cement mortar complete all as specified & directed. 82 Taking down cement plaster any description including raking out joints, hacking for key and scrubbing down with water etc complete all as specified & directed. 83 M&L two coats of acrylic weather apex paint (with putty finish) on newly plastered wall surfaces including preparation of surface complete all as specified and directed. 84 M&L twocoat of acrylic weather apex paint (with putty finish) to old surfaces of walls after complete removal of existing treatmentincluding preparation of surfaces with putty finishes complete all as specified and directed. 85 Taking up or down 15mmdia, steel tubing & connections including cleaning for refining or removal to store complete all as specified and directed. 86 Taking up or down 20mmdia, steel tubing & connections including cleaning for refining or removal to store complete all as specified and directed. 87 Taking up or down 25mmdia, steel tubing & connections including cleaning for refining or removal to store complete all as specified and directed. 88 Fixing only steel water tubing galvanised 15 mm bore, medium grade with all fittings fixed to wall and ceiling or in floor complete all as specified and directed. 89 Fixing only steel water tubing galvanised 20 mm bore, medium grade with all fittings fixed to wall and ceiling or in floor complete all as specified and directed. 90 S&F steel water tubing galvanised 25 mm bore, medium grade with all fittings fixed to wall and ceiling or in floor complete all as specified and directed. 91 Fixing only steel water tubing galvanised 25 mm bore, medium grade with all fittings fixed to wall and ceiling or in floor complete all as specified and directed. 92 Dismantling water tank capacity250/500/1000 ltr complete all as specified and directed. 93 S&F rotational molded polythylenewhite cloured, tripple layer water storage tank 1000 ltr capacity (Cylinderical vertical with closed top), three layered, white coloured, hoisted and fixed in position including suitable GI Nipple for HDPE water tank complete all as specified and directed. 94 S&F rotational molded polythylene white cloured, tripple layer water storage tank 300 ltr capacity (Cylinderical vertical with closed top), three layered, white coloured, hoisted and fixed in position including suitable GI Nipple for HDPE water tank complete all as specified and directed. 95 S&F 110mm bore PVC (SWR) rain water pipe single socketed in any length with rubber ring joints, jointed with solvent fixed to wall with matching PVC SWR rings including cutting holes and making good the disturbed portion with PCC (1:2:4) type B0 complete all as specified and directed. 96 S&F 110mm bore Door typePVC (SWR) bends any radius complete all as specified and directed. 97 Surface dressingn not exceeding 15 cm deep andgetting out soft/loose soilcomplete all as specified and directed. 98 M & Lmachine cut kota stone slab flooring 18-20mm thick(minimum size 55 cms x 55 cms) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, mirror polishing including 15mm of screed bed in CM 1:6.complete all as specified and directed. 99 M & L machine cut kota stone slabs as in vertical surfces such as risers of steps 18-20mm thickover cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, mirror polishing also moulding edgesincluding 10mm of backing coat in CM 1:4, complete all as specified and directed. 100 Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete. complete all as specified and directed. 101 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete as specified and directed. 102 M&L for PCC type C-2 1:3:6 (40mm graded stone aggregate) for filling of post hole complete all as specified and directed. 103 S & F for steel work in tubular trusses ,channels , including special shaped washer, platesnuts and bolts , including necessary drillingetc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed. 104 S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping complete all as specified and directed. 105 Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensilestrength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. 106 M&L for preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed. 107 Earth work in excavation by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m in all kind of soil complete all as specified and directed. 108 Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm with putty finish over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. 109 M&L for Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over a coat of alkali resistant primer and 3mm thick wall care putty finish complete, as per manufacturers specification. Two or more coats on new work complete all as specified and directed. 110 M&L for 75mm thick Plain Cement concrete type B- 2, 1:2:4 (40mm graded aggregate) laid in panels n. exc 3.00m long and in ulternate bays including necessary form work complete all as specified and directed. 111 Supplying and fixing steel windows/Ventilators n. less than 1.20 mm thick Box type (primer coated) ERW hollow ‘P’ section of size60mmx25mm single rebated comprises of glazed and skeleton shutterEWR Sec 50mmx20mm and 1mm thick and two open able leafconsisting two Nos sash bar of ‘T’ section 20mm x 3mm complete welded to frame with one vertical mullionof EWR box ‘T’ section of size 60mmx25mm and 1.25mm thick. Each window including following fittings welded to failed shutter :- (a) Holdfasts 150mm long 12mm x 3mm made to shape – 04 Nos per window (b)Handle of Z Sec 20mmx25mm, 100mm long – 1 Nos of leaf, (c) MS tower bolt 150mm long 02 Nos per leaf(d) ‘Z’ sec 20mm x 25mm, 100 long stopper – 01 Nos per leaf, (e) Cleat 55 mm long of hollow square 15mmx20mmx63mm welded to hinges – 01 Nos per leaf(f) MS pintal hinges of size 75mmx12mm – 02 Nos per leaf (g)fabrication and fixingarrangement complete. 112 S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as specified and directed. 113 M&L for 4.0 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exceeding 0.5 Sqm in eachpanes all as specified and directed. 114 Preparation of surfaces and applying 02 coats of interior emulsion paint (light shade) @ 10 sq.m/litre/2 coats by using roller/brush to wall/Ceiling surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed. 115 Preparation of surfaces and applying 02 coats of exterior emulsion paint (light shade) with highlighter of any approved shade,@ 5 sq.m/litre/2 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion by using following brands of emulsion and primer complete all as specified and directed. 116 M&L for :- (a) Complete removal of existing treatment of any type/description from walls/RCC surfaces/ceiling/chajjas/roof projections etc with mechanical means/grinder.(b) Preparation of existing treated surfaces of external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/ balcony etc and applying one coat of cement base paint with highlighter of any existing shade, @ 5 sq.m/kg/1 coat by using following brands of cement based paint and primer by brush or roller complete all as specified & as directed by Engineer-in-Charge. 117 M&L for :- (a) Complete removal of existing treatment of any type/ description from walls/ RCC surfaces/ceiling/chajjas/ roof projections etc with mechanical means/grinder.(b) Preparation of existing treated surfaces on walls/ceilings and applying 01 coat of interior emulsion paint (light shade) @ 20 sq.m/litre/1 coat by using roller to wall/ceiling surfaces including filling wall putty in depressions, sand papering etc and making the surface smooth andapplying a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed. 118 Demolition of reinforced cement concrete of any description and in any position not other wise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed. 119 S & F in repair 20 mm dia gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. 120 S & F in repair 15 mm dia gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. 121 S&F CP gratings 100 mm dia of PTMTfixed in repairs.(Minimumweight25 gms ) complete all as specified and directed. 122 Supplying and laying of CPVC pipes of dia 20 mm SDR 11 & Plain CPVC SDR 11 inlcuding allfittings i.e.Brass elbow, Brass Tee, Male threaded Brass adaptor, Female threaded brass adaptor, unions ball valves, flange and tank adaptor etc) concealed including cutting chases to brick wall/ceiling or laying in floors/trenches and making good complete all as specified and directed. 123 Supplying and laying of CPVC pipes of dia 25 mm SDR 11 & Plain CPVC SDR 11 inlcuding allfittings i.e.Brass elbow, Brass Tee, Male threaded Brass adaptor, Female threaded brass adaptor, unions ball valves, flange and tank adaptor etc) concealed including cutting chases to brick wall/ceiling or laying in floors/trenches and making good complete all as specified and directed. 124 Demolition of brick work built in cement mortar of any description complete all as specified and directed. 125 Taking down chowkats or frames with shutters (without taking off shutters from the frame) exceeding 1.5 sqm but not exceeding 4 sqm each complete all as specified and directed. 126 Taking downsteel window / ventilators complete all as specified and directed. 127 S & F in repair for 5.5mm thick sheet glass(tinted),selected quality and glazing with necessory arrangement in square exc 0.5 sq. m in each pane complete all as specified and directed. 128 S&F central hole wash basin mixer 15mm bore brass without polp up waste with 10mm dia 450mm long copper pipes. Complete all as specified and directed. 129 S&F in repairs stainless steel curtain rod 25 mm dia (minimum weight 0.36 Kg per RM) with brackets, fancy knobs and rings (20 cm c/c) etc complete all as specified and directed. 130 S&F and shower health faucet to EWC, CP brass with minimum 1000mm long CP flexible pipe, connection etc., complete all as complete all as specified and directed. 131 S&F in repairs cabinet of PTMT with looking mirrorof size 350x555mm complete all as specified and directed. 132 S&F Towel Ring of aluminium fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90 gms) complete all as specified and directed. 133 S&F Sheet glass shelf assembly/corner shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long bu with aluminium alloy brackets and guard rail complete all as specified and directed. 134 Taking down eaves gutters and rainwater pipes,PVC (SWR) pipes ( any size or pattern ) including all fittings heads ,shoes, bends,and removal to store complete all as specified and directed. 135 S&F vitreous china premium/1st quality wall hung water closet with P trap white/ivory/off white, concealed flushing cistern including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc., and incl. plastic seat cover as recommended by manufacturer for particular model closed pattern with flat bottom etc; and incl S&F of all necessary accessories set like rag bolts/gel gasket/hinges etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete in all respect all as specified. 136 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. 137 Providing precast RCC Jalliesany shape ( cement concrete Type B0 1:2:4 12.5mm gragded aggregate) louvres and jallies,40 mm thick (measured solid), including allmouldings set in CM 1:4 complete all as specified and directed. 138 Dismantling steel sheets(corrugated semicorrugated ,Plain or corrugated steel sheeting,any gauge, thickness etc) sheet in roof covering complete all as specified and directed. 139 S & F for Flat ironfor wind ties,plates (plain or chequered) channels, posts, square cut or notched (ordinary and counter sunk) forming holesetcFe 410 -W (Gde- E- 250) quality- A complete all as specified and directed. 140 S&F mild steel screw bolts (machine made) with hexagonal or square head at one end, and screwed the other,or screwed bothend to be fitted with washer and one hexagonal/ square nut not exceeding 5cm long and dia of neck 11 to 15mm complete all as specified and directed. 141 M&L for preparation ofnewly plastered surface of wall any description and applying twocoats of oil emulsion distemper over3 mm thick wall putty over a coat of chalk whiting layer on plastered surfaces preparatory to distempering complete all as specified and directed. 142 M&L for preparation of old decorated surfaces of walls by brooming down or steel wire brushing,scrapping down smoke soot,moulds,moss and efflorescent salts and trading oil and greasy spotsand then applying two coats of cement base paintover a layer of wall putty complete all as specified and directed. 143 M&L for preparation of old decorated surfaces of walls by brooming down or steel wire brushing,scrapping down smoke soot,moulds,moss and efflorescent salts and trading oil and greasy spotsand then applying two coats of distemper oil emulsion over a layer of wall putty complete all as specified and directed. 144 M & L forold decorated ceiling surfacesby brooming down or steel wire brushing,scrapping down smoke soot,moulds,moss and efflorescent salts and trading oil and greasy spotsandthen applyingtwo coats of white washcomplete all as specified and directed. 145 M&L for preparation of old painted wooden surfaces of any description over 10cm width or girth not otherwise described and applying onecoats of synthetic enamel paint complete all as specified and directed. 146 M&L for preparation of old painted steel surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. 147 S&F PVC wall Lining (hololow section) including fillets consisting of 5mm thick/hollow plain colour PVC sheetinclusive of solvent cement and fixing at site on PVC as per specification and drawing all as specified and diected. 148 Demolition concrete in ground floors and pavings n exc 15cm thickness (below or above ground level) complete all as specified and directed. 149 M&L 25mm thick cement concrete flooring type B0, 1:2:4 using 12.5 mm graded aggregate finished even and to receive interlocking tile and sand cushioning complete all as specified and directed. 150 M&L for sand filling (25mm thick) under floors or in foundations including watering and consolidation complete all as specified and directed. 151 M&L Machine pressed precastrubber moulded concretecoloured interlocking paver block any shape and size confirming to IS 15468-2006 of 60 mm thickness with grey cement and pigmentM-35 Grade 20mm graded stone aggregate) complete all as specified and directed. 152 S & F pressed steel frames of frame size 125 x 60mmfor doors with one or more rebatesincluding necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified,supplied and fixed complete all as specified and directed. 153 S & F pressed steel frames of frame size 105 x 60mmfor doors with one or more rebatesincluding necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified,supplied and fixed complete all as specified and directed. 154 M&L for providing cement concrete (1:3:6) type C1 using 20 mm gradded stone aggregate for filling in pressed steel frames and other similar items complete all as specified and directed. 155 S & F 35mm thick shutter, plain, framed, panelled shutters factory made(any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed. 156 S & F Second class hard wood glazed and skeleton Door/ window shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc divided into squares with plain, chamfered or rounded mitred and rebated sash bars any number& fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part-I, section 8 clause 8.24 (a) complete all as specified and directed. 157 S&F 125 mmbutt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed type C-21 complete all as specified and directed. 158 S&F aluminium handle cast type anodised, 150mm long complete all as specified and directed. 159 S&F 300mm long aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed. 160 S&F aluminium anodised barrel tower bolts of extruded section 150mm long complete all as specified and directed. 161 S&F 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. 162 S & F for floor door stopper of aluminium alloy body and tongue, Overall length of cover plate 140mm anodised, with hard drawn steel spring, complete all as specified and directed. 163 Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed. 164 M&L mild steel work i.e. Angle iron/flat ironas in post and struts (Angle Size upto & above65x65x6 & FI 40x6 mm)in fencing includingcutting tops to shape, drilling holes, notching for wire etcconforming toFe-290 grade E-165 complete all as specified and directed . 165 S&F10mm dia MS round bar for fixing of chain link fencing with post complete all as specifies and directed. 166 M&L Preparation of new steel primed surfaces of any description, n exc10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specifies and directed. 167 Supply only chain link fencing galvanised mild steel hot dipped (IS-2721) of 4 mm dia of mesh size 100x100 mm complete all as specified anddirected. 168 Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wirecomplete all as specified anddirected. 169 S & F flat iron strip for supporting chain link fencing complete all as specified anddirected. 170 Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured complete all as specified anddirected. 171 M&L for 150 mm thick Hardcore of brocken stone or boulders gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified anddirected. 172 M&L 50 mm thick cement concrete flooring type B0, 1:2:4 using 12.5 mm graded aggregate finished even and to receive interlocking tile and sand cushioning ccomplete all as specified anddirected. 173 M&L for Flush pointing to brick walls in CM 1:4 complete all as specified anddirected. 174 M&L for Keyed pointing to brick walls in CM 1:4 complete all as specified anddirected. 175 S&F forJoist, channel, angle, or tee sections, fixed independently, withoutconnecting plates, etc. (cut to ordinary lengths i.e. Within 20mm of the length indicated complete all as specified anddirected. 176 S&F for 1.25 mm th Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified anddirected. 177 S&F for Framed work as in doors or gates of angle or other sectionwith gusset plates, rails, braces, etc., complete, drilled forfixing of steel sheeting or other covering. Doors, etc. to beprepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified anddirected. 178 Taking down carefully aluminium point wiring (light, fan, socket or power, bell complete fitting such as sockets, ceiling roses, pendants, batten holders, regulators and making good the disturbed surfaces of wall, floors, ceiling in CM 1:3 etc complete all as specified and directed. 179 M & Lfor concealed conduit point wiring complete for light/ fan on independent /combine boardwith cable 1.5 sqmm (Nominal area) FRLSPVC insulated multistranded unsheathed copper conductor,drawn in and includingPVC Concealed conduitpipe medium grade 20 mm dia, pipe hooks , elbows, juction covers and junction boxes , aftercutting in wall chasing for conduits and sinkings for metal flush boxes suitable lengthandthickness for mounting, switches, sockets,fan regulator making the gooddisturbed surfaces of wallin CM 1:3 with white wash or existing colour including provision ofcontinuousearth continuity conductoralong with point wiring of 1.5 sqmm copper PVC insulated cable for one light/ fan point controlled by one switchand connected to commonearth dolly, complete all as specified anddireced. 180 All as per Srl item No 183 here in before but for one switch socket combination5/6 amp on independent board complete all as specified and directed. 181 All as per Srl item No 183 here in before but for one three pin socket outlet 5 Amp on same board with other switches complete all as specified and directed. 182 All as per Srl item No. 183 here in before but for one switch socket combinationt 6 pin 5/ 15 Amps on independent board with copper conductor 2.5 Sqmm including with same size conductor for earth dolly complete all as specified and directed. 183 S & F switch piano flush type 5/6 Amps single pole one way complete all as specified and directed. 184 S & F switch socket combination 5 pin, type 5/6 Amps flush type complete all as specified and directed. 185 S & F switch socket combination 6 Pin, 5/16 Amps flush type complete all as specified and directed. 186 S & F Socket outlet 5 pin 5 Amps flush type complete all as specified and directed. 187 S & F stepped type, fan regulator not less than 120 watt for ceiling fan 1200/1400mm sweep complete all as specified and directed. 188 S & F ceiling rose surface bakelitethree terminals complete all as specified and directed. 189 S & F in replacement of existing light fitting withLED batten with Eye Soft technology & glarefree diffuser for perfect application in modern homes or aliminium housing andintegrated electronic driver,20 watt having input voltage AC90-300V, 50 Hz , 6500K, and all other accessories including connection with flexiblecable copper conductortwin coreof size 23/.2 mm upto ceiling rose/connector complete all as specified and directed. 190 S&Fin replacement security light fitting LED TYPE 25 watt with all necessary acessories, Clear transparent acrylic cover, prewire suitable to operated on 230 volt 50 HZ AC & Supply and fixing to wall / on pole including fixing arrangement with suitable galvanized iron pipe “light grade” brackets 2 mtr length bent to shape to obtained required shape including clamps, nuts / bots / washers etc connecting with suitable flexible copper wire of size 23/0.0076 complete all as specified and directed. 191 S & F in replacement of sub-main wiring with two single core cables PVC insulated and un-sheathed 6 sqmm (Nominal Area) FRLSH stranded copper conductor drawn in and including steeldia 25mm “medium quality” conduit including 6.00 Sq mm (Nominal Area) copper cableas earthcontinuity conductor after chasing in wall and making good the disturbed surfaces and white wash or existing colour , necessary junction box and coversincluding necessary connections, PVCflexible pipes are used in pannel board while connecting the cable complete all as specified and directed. 192 S & F sheet metal enclosure for double door DB made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted SP & N 8 ways, 240 Volts, ISI marked 200 amps bus bar stove enameled dust and vermin proof suitable for incorporation MCBs and isolators etc complete all as specified and directed. 193 S & F sheet metal enclosure for double door DB made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted SP & N 4 ways, 240 Volts, ISI marked 200 amps bus bar stove enameled dust and vermin proof suitable for incorporation MCBs and isolators etc complete all as specified and directed. 194 S & F MCB ‘C’ series type suitable for 240 volts, AC supply 32 Amps, S P & N with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed. 195 S & F MCB ‘B’ series type suitable for 240 volts, AC supply 32 Amps, S P & N with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed. 196 S & F MCB ‘B’ series type suitable for 240 volts, 10 KA, AC supply 20 Amps, single pole (SP) with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed. 197 S & Fin replacementMCB ‘B’ series type suitable for 240 volts,10 KA,AC supply6 to 32 Amps , single pole (SP) with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed. 198 M & L for Earthing complete with GI earth plate electrode 60 cm x 60 cm x 6 mmthick burried directly in ground (earth pit not less than 2.25 Mtr deep below ground level ) with top edge of plate not less than 1.5 Mtr below ground level , connecting to GI earth lead 4 mm dia GI earth wire ,by means of bolts,nuts and washers of GIand protection by provisionof GI medium grade pipe 15 mm bore including provision of concrete pit in PCC (1:2:4) type B1 using 20 mm grade stone aggregate with 40 mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 gs /Sqmm ) and frame of angle iron 25mmX25mmX6mm with lugs 02 Nos and with 6 mm dia MS bar handle made to shape ,GI light grade 20mm bore pipe for watering perforated at the bottom 1.75 meter long placed ontop edge of earth plate common salt and charcoal filling test point made out of 40 mmX 8 mm FI with fixing arrangement ,funnel, wire mesh and earth work inhard dense soil ,returning filling in and removal of surplus soil to a distance not exceeding50 mtrs all as per electric plate no.3 of SSR part 1 and connecting to earth test point including taking out unserviceable earthing with all acessories all as specified or indicated including testing on complete all as specified and directed. 199 Fixing only exhaust fan of any size and any type complete all specified and directed.Note : Exhaust Fan shall be issued free for fixing under Sch B. 200 Fixing only ceiling fan of any size and any type complete all specified and directed.Note : Ceiling Fan shall be issued free for fixing under Sch B. 201 Fixing only electric water heater any type and any capacity including fixing / grouting nut, bolts complete all as specified and directed.Note : Water heater shall be issued free for fixing under Sch B. 202 S&F compact & decorative energy efficient LED mirror light fitting with antiglare diffurser and decorative end caps suitable input voltage AC 90-300V, 50Hz, 6500K, and all other accessories including connectin with flexible cable copper conductor twin core of size 23/.2mm upto ceilign rose/connector complete all as specified and directed. 203 S&F compact & decorative energy efficient LED mirror light fitting with antiglare diffurser and decorative end caps suitable input voltage AC 90-300V, 50Hz, 6500K, and all other accessories including connectin with flexible cable copper conductor twin core of size 23/.2mm upto ceilign rose/connector complete all as specified and directed. 204 S&F angle holder insulated body with back plate for conduit fittings complete all as specified and directed. 205 S&F LED lamp 9W for angle holder complete all as specified and directed. 206 Supply and filling in sand for cable protection complete all as specified and directed. 207 Supply and lay standard size bricks subclass B type complete all as specified and directed. 208 Supply and lay in replacement jointing and testing and commissionign in replacement of 10 sqmm x 2core XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty multi standed aluminium conductor & PVC sheathed LT cable 1100 V grade conforming to IS-7098 laid in trenches/ducts/fixed on poles wall/laid under roads/paths/drain/culverts or passing through pipes complete all as specified and directed. 209 Supply and lay GI pipe 50mm light grade for cable protection in walls trenches or any situation including clamp nut bolt etc complete all as specified and directed. 210 Supply and lay GI pipe medium grade ISI marked 25mm dia including all fitting in old/new position complete all as specified and directed. 211 M&L cutting existing GI water tubing of size 100m bore for alternation or addition including screwing/threading and jointing with suitable size GI socket complete all as specified and directed. 212 M & Lfor concealed conduit point wiring complete on independed/combined boad with cable 2.5sqmm (nominal area) FRLSH, PVC insulated multi multistranded unsheathed copper conductor, inlcuding conduit fitting after chasing in wall and making good the disturbed surfaces include sunken iron box, 3mm thick bakelite sheet cover, pipe hooks elbows, brass screws washers with provision of earth continuity conductor of 2.5sqmm copper single core PVC FRLSH insulated cable controlled by one switch and connected to commont earth dolly for one socket outlet 3 pin 15 amps complete all as specified and directed. 213 Supply and fix in industrial socket metal clad plug and socket with MCBs single pole 20 amps complete all as specified and directed.
