Up Gradation And Renovation Of Gitanjali Stadium And Its Infrastructural Improvement Works And Including Sports Ground At Rajdanga, Kasba, Kolkata-107 (Electro-Mechanical Part)
Tender Value
48.65 Lakhs
Estimated cost
Bid Submission
10 Jun 2025
0 days left
EMD
97304
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kasba → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Up Gradation And Renovation Of Gitanjali Stadium And Its Infrastructural Improvement Works And Including Sports Ground At Rajdanga, Kasba, Kolkata-107 (Electro-Mechanical Part)
BOQ
| Sl. No. | Item Description |
| 1 | Supply & Delivery of 12 Mtrs. GI octagonal pole((With monkey ladder system) fabricatedpart as per dimension: Top dia-90mm, bottom dia-250mm, section-2 nos(section length-6200mm), thickness-3mm, base plate-350mmx350mmx20mm including foundation bolt-M24x750mmx4nos \"J\" type bolts including Supply and fixing of Standard Channel bracket suitable for fixing 4 nos LED floodlight complete as per drawing and direction of EIC |
| 2 | Foundation for 12mtr long Gl pole: Design, drawing & civil foundation work and erection of 12 mtr. long Gi octagonal pole by dismantling of foundation approx 0.6 mtr.x 0.6 mtr.x 1.91 mtr. including rernoving of spoils and necessary trimming the side of trench levelling dressing and after that dressing bed levelling and filling joints & PCC after that tor rod proper size, stirrups, binders etc and vertically M.S Tor Rod suitable dia complete with binding with black annealed wire, shuttering and concrete including fixing of pole foundation bolts( with graded stone chips 20mm as IS proportion (1:2:4) complete and water rigidity next seven days |
| 3 | Supply & Delivery of High wattage & High efficiency LED floodlight Luminaires with high power single die ceramic base LED and IP66 single piece die cast housing and high impact resistance (IK10) PC cover with Drivers are fully integrated into each model, 120-277V, CCT:6500K, System efficacy ≥ 135 LPW, Min.40,000lm, 10KV SPD, (make- Philips, BVP485 LED385 CW FLNB A1 PSU GR SPD) or equivalent and as per technical specification and direction of EIC. |
| 4 | Supply of robust and reliable, high eiificiency with single die ceramic base IP66, CCT-6500K Min. 150W LED road lighting luminaire, make-Philips, BRP 340 LED 150 CW HO SLC S2 PSU GR or equivalent, as per technical specification and direction of EIC. |
| 5 | Supply of LED post top, 5700k, 3150lm, 70lm/w, Min. 45W, 140-270V, 50Hz, made in die-cast aluminium bottom housing and spun aluminium top reflector with decorative clear acrylic diffuser and IP 65 protection, make-Bajaj, BGCTN 45W LED WH or equivalent,as per technical specification and direction of EIC . |
| 6 | Hoisting, fixing and commissioning of luminaries including making necessary connections & earthing attachment(a) HPSV/LED Luminaries |
| 7 | Supplying & Erection of medium size feeder pillar box of Size (1200 x 750 x 450 mm) made up of 2 mm thick MS Plate along with suitable M.S. Angle. The P.B. have double hinge door at the front & back with suitable locking arrangement. The box will be painted by 2 coat of aluminiam paint over 1 coat of red oxide paint. Suitable arrangement should be provided for fixing of Timer unit, fuse unit & other accessories. Leg of the pillar box will be 900 mm in length by made up of (35 x 35 x 3 mm MS Angle with suitable base Plate. Legs of the Pillar box will be erected at 300 mm below the ground level with cement concrete (6:3:1). Rest portion coverd by 5\" Brick Wall with plastering & net cement & bottom portion filled with silver sand as drawing & direction of E.I.C with supply & Fixing of following accessories:1no. 415V, 100A TPN SFU with sheet steel enclosure1no 3 Pole Power Contactors, L&T make,MNX95240 VAC Base/DIN Mounting Daily Time Switches 3 nos Kit-kat Rewireable Porcelain Fuse unit |
| 8 | Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below:By ISI-Medium GI pipe |
| 9 | Supply & Delivery of 1100 volt Grade PVC/XLPE insulated armoured/unarmoured aluminium/cu conductor cables of following sizes: |
| 10 | 4Cx16sqmm Al. Armoured |
| 11 | 4Cx10sqmm Al. Armoured |
| 12 | Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed |
| 13 | Laying only Cable upto 50 sqmm through existing RCC/Hume/ GIPipe/open masonary trench for single, 2, 3, 3½ & 4 core |
| 14 | Supplying & fixing medium gauge GI Pipe ( ISI-Medium)Protection with necessary fittings and jointing metarials asrequired40 mm dia |
| 15 | Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages andpainting |
| 16 | Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : |
| 17 | For 4 core, upto 16 sqmm |
| 18 | For 4 core, upto 10 sqmm |
| 19 | Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : |
| 20 | For 4 core, upto 16 sqmm |
| 21 | 4 core 10 sqmm cable |
| 22 | Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment6 way, make-Legrand. |
| 23 | Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.2+12 way |
| 24 | Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection. |
| 25 | DP, 40 A, Make- Legrand |
| 26 | FP, 63 A, make-Legrand. |
| 27 | Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connectionmake-Legrand. |
| 28 | SP, 6-32 A |
| 29 | Supplying and fixing double door sheet steel (16SWG), powder coated cable end box for TPN DB horizontal / vertical enclosure with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish with nuts bolts etc incl. provision for earthing attachment6 way, Horizontal |
| 30 | Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. |
| 31 | 2.5sqmm |
| 32 | 6 sqmm |
| 33 | Dismentling and shifting of existing main switches, dressing of existing cables, dismentling of nexisting battenwiring etc. including tools and tackles, complete in all respect as per setisfaction of EIC. |
| 34 | Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit \"FR\" (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. 175mmx100mmx65mm inspection box,making earthing attachment, painting the MS box and mending good the damages to original finish |
| 35 | a) Average run 6 mtr |
| 36 | Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit \"FR\" (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire as ECC, to 5A 3 pin flush type plug socket & Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. painting the MS box and mending good the damages to original finish |
| 37 | On Board |
| 38 | Distribution wiring in 1.1 KV single core stranded \"FR\"PVC insulated & unsheathed copper wire (Brandapproved by EIC) in 20mm size PVC rigid conduit \"FR\"(Precision make) incl. necy. fittings as required |
| 39 | 2 x 2.5 sqmm + 1 x 1.5 sqmm ECC |
| 40 | 2 x 6 sqmm + 1 x 4 sqmm ECC |
| 41 | Supply & Fixing 240 V, 4 nos. 6A, plug socket with separate 4nos. 6 A Piano key type switch, indicator & 16A kit-kat flushtype fuse (Brand approved by EIC) on sheet metal switchboard embedded in wall incl. S & F 240x200x65mm MS(16SWG) switch board and bakelite/perspex top cover of3mm thick by Brass screws after making housing for switch bycutting bakelite/perspex cover and making necessaryconnections as required. |
| 42 | S & F 250V A.C.1200 mm sweep, 370RPM speed,225CMM air delivery ceiling fan, make-Crompton (Model name-RIVIERA HI SPEED 1Star ) or equvalent, Step type electronic regulator, & MS fan clam complete with blades, canopy, fork, rubber bush etc. incl. S & F 2 X 1.5 PVC wire for down rod upto 30 cm. incl. S&F of upto 1mtr. extra down road, painting the rod with approved paint and making necessary connection as required, as per specification & direction of EIC. |
| 43 | Supply,delivery & fixing of single phase, 50 Hz, 45watt, 1400RPM, 720CMM, 225mm (9\") semi commercial, double bearing metal exhaust fan, Make-Crompton (Model No.-225mm TRANSAIR (Double Ball Bearing)) or equivalent,incl. fixing after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust as per specification & direction of EICMake-EPC/Crompton/USHA or equivalent. |
| 44 | Supplying and fixing TMC 502 P 1xT-LED 22W P3242 LED Batten complete with 1no 18W LED Tube, Make-Philips (Model No.-Mas LEDTube 1200mm 18W865 T8 I – 2100lm) or equivalent, as per specification & direction of EIC. |
| 45 | Supplying and fixing 700Lm, 6.5Watt, Natural white, IP65 protection, surface/wall mounting VistaGlow LED bulkhead, Make-Philips (Model No.-WT140W LED7S CW PSU S1 PC) or equivalent, as per specification & direction of EIC. |
| 46 | Supply & delivery at site 150mm dia (5mm thick Bansal Make) MS ERW column pipe duly flanged joint at both end i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and painting as per direction of EIC. |
| 47 | NON RISING cast Iron double flange SLUICE Valve as per ISI/14846 PN 1.6 rating complete with Bronze body & wedge Stainless Steel spindle, Gland packing, Rubber gasket150mm DIA Sluice Valve |
| 48 | Providing, installation, testing and commissioning ofnon-return valve of following sizes confirming to IS:5312 complete with rubber gasket, GI bolts, nuts,washers etc.as required :150mm dia |
| 49 | Supply and delivery at site \"KSB\" MAKE BOREWELL SUBMERSIBLE PUMP MOTOR SET MODEL BPDN 302/07A+UMAI-150-13/22, 15HP, 3 PHASE 440 VOLTS 2900 RPM STAR DELTA MOTOR, PUMP HAVING DELIVERY OUTLET 80 MM, DISCHARGE CAPACITY 45 Cub.Mtr/Hr. AT 61 MTR HEAD WITH 3 MTR LEAD CABLE ONLY,including less cost of old damaged materials as per direction of EIC. |
| 50 | S & F of rubber gasket of suitable size and thickness. |
| 51 | Supplying, fitting, fixing bolts with nuts, washer of length upto 75 mm and 150 mm dia. |
| 52 | Hiring charges for transportation vehicles for 12 Hrs @250.00/Hr. (TATA 407 or equivalent) incl. driver, helper, fuel, mobil, all complete with all materials handling accessories, all necy. Valid documents as per MV Rules and to be used from Workshop to pump house as per direction of EIC. |
| 53 | Installation, testing and commissioning of submersible pump-motor set incl. all accessories after lowering down the set along with coloumn pipes in a existing well. This item in incl. by S&F MS (4.85 mm thick) cover for tube well and one no. bend and two nos. holding clamp (75mmx12mm) for column pipe and also included arrangement for chain pulley blocks, tools, trackles and their all type of transportation |
| 54 | Supplying and Laying through pre-laid HDPE pipe of 3 core 4mm² PVC Insulated & PVC Sheathed Industrial Cable for Submersible Pump Motors 1100 Volt, conforming to IS 694, complete in all respect as per direction of EIC. |
| 55 | Supply of High Density Poly-ethylene Pipe conforming to IS - 4984 - 1985, 40mm Dia |
| 56 | Labour for fitting and fixing of 40 mm dia. high density poly-ethylene pipes or P.V.C. pipes for ground work including cost of jointing materials paints etc. fitting and fixing all necessary specials, cutting pipes, making threads, cutting holes where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary and refilling the same complete as per direction of the Engineer-in-charge. |
| 57 | Labour for jointing and lowering G.I. or E.R.W. or M.S. pipes including within the tube well bore vertically with necessary sockets, special fittings and welding as required including cost of all jointing materials, hire charges of tools and plants, cutting pipes to required sizes, making threads, welding pieces together etc. as necessary as per direction of the Engineer-in-charge. |
| 58 | Above 100 mm dia. and upto 200 mm dia. pipe |
| 59 | Supply, Delivery and fixing of Fully Automatic Star-Delta Starter 14-23A, 415V, 20HP with single phase prevention feature, bimetal complete protection against overload, Dust and vermin proof enclosure, 15 HP Star-Delta Starter, L&T make MB1 FASD SS95896DODO or equivalent, complete as per direction of EIC. |
| 60 | Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 40 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required |
| 61 | Connecting the equipments body to earth busbar includingS&F 20 mm x 3 mm galvanised (Hot Dip) MS flat on wall/floorwith GI saddles as required and connection to equipments incl.drilling holes, with bolts, nuts, washers etc. |
| 62 | FIRE PUMP HOUSE |
| 63 | MAIN PUMP : |
| 64 | SERVICING OF MAIN FIRE PUMP WITH REQUIRED MATERIALS (INCLUDING DISMATLING & RE-FIXING) (MATERIAL-C-CHANNEL, COUPLING GUARD, BLACK PAINT, PRESSURE GAUGE, 15 NB BALL VALVE, Foundation work, Gasket, Gland packing, etc. Complete in all respect.) |
| 65 | JOCKEY PUMP : |
| 66 | SERVICING OF JOCKEY FIRE PUMP WITH REQUIRED MATERIALS (MATERIALS- GREEZE, COUPLING GUARD, GLAND PACKING & BLACK PAINT,Foundation work, Gasket,etc. Complete in all respect.) |
| 67 | DIESEL PUMP : |
| 68 | SERVICING OF DIESEL FIRE PUMP WITH REQUIRED MATERIALS (MATERIALS-INJECTOR, COOLING, MOBIL, FILTER, GRREZE, GLAND PACKING, COUPLING , Foundation work, Gasket, Gland packing, et. Complete in all respect.) |
| 69 | MS ERW PIPE : |
| 70 | SUPPLY & LAYING OF 200 NB MS ERW (MEDIUM GRADE) PIPE |
| 71 | SUPPLY & LAYING OF 150 NB MS ERW (MEDIUM GRADE) PIPE (FOR UNDER GROUND)(Make: JINDAL/TATA) |
| 72 | SUPPLY & LAYING OF 100 NB MS ERW (MEDIUM GRADE) PIPE(Make: JINDAL/TATA) |
| 73 | VALVES: |
| 74 | SUPPLY & INSTALLATION OF 150 NB BUTTERFLY VALVE WITH 1.6 PN (WAFER TYPE) (Make: KARTAR) |
| 75 | SUPPLY & INSTALLATION OF 3 WAY FIRE BRIGADE INLET(Make: KARTAR) |
| 76 | SUPPLY & INSTALLATION OF 25 NB BALL VALVE WITH 1.6 PN(Make: KARTAR) |
| 77 | SERICING OF HYDRANT VALVE (INCLUDING, GASKIT, NUT & BOLT, DISH WASHER, CAP WITH CHAIN, Welding, jointing etc.) |
| 78 | SUPPLY & LAYING OF 4 MM THIK WRAPPING & COATING (FOR UNDER GROUND PIPE)(Make: IWL) |
| 79 | 63 mm dia,15 m long RRL hose pipe with 63 mm dia male and female couplings dulyb ound withGI wire SS Coupling (Grade 304) (Make: SAFEX) |
| 80 | First Aid hose reel in red colour drum with 30 mts long and 20 mm dia heavy duty rubber water hose, 20 mm dia ball valve, terminating with SS coupling&triple purposenozzleof 6mm outlet with shut off valve.(Make: FIRESHIELD) |
| 81 | PRIMER & PAINT FOR PIPE (FOR ENTIRE OVER GROUND PIPE) (Make: BERGER) |
| 82 | DIGGING & FILLING FOR UNDERGROUND WORK ETC. |
| 83 | LOADING & UNLOADING & TRANSPORTATION |
| 84 | Supply & Delivery & fixing of 12 V 100 Amp - 2 nos Battery & Automatic Battery Charger, |
| 85 | Supply & Delivery,refilling & restoration, of Disel Oil |
| 86 | Supply & Delivery,refilling & restoration, of Mobil Oil |
| 87 | Supply & Delivery & fixing of Silencer unit, |
| 88 | Supply & Delivery & fixing ofFoot-valve of as per required size and Servicing of Priming line including servicing of Pump, Valve as requires. |
| 89 | TESTING, installation, COMMISSIONING, Design, documentation and require accessories for run the system |
| 90 | Add GST @ 18% |
| 91 | Add CESS @ 1% |
AI Tender Summary
Tender Timeline
May 26, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedJun 10, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 13, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender