Annual Rate Contract For Repairing Of Various Size And Make Pipe Line Under Sub Dn Siwana; 1 Repairing of leakage in existing Distribution/Rising Main/Transmission Main AC/PVC/HDPE pipe lineup to 1.5 mtr depth of sizes as given below by digging out suitable size of pit at site of work including taking out the burst pipe from trench, dewatering and providing adequate safety arrangement at site. This will also include cutting of pipe ends, fixing of pipe piece with jointing material, tightening of CID Joints to make repair leak proof and then refill the pit from excavated sand by ramming it at sides of pipe & upto ground level for entire job contractor will use his own T&P & labour and will arrange transportation of material required from Jen store. (Required material such as pipe piece, CID Joints shall be provided by Department free of cost)- In all type Soil AC/PVC/HDPE pipe- 50/63/75mm 2 80/90mm 3 100/110mm 4 125/140mm 5 150/160/180mm 6 200/225mm 7 250/280mm 8 300/315mm 9 350mm 10 400mm 11 450mm 12 500mm 13 Add on above item no. 1 for B.T. Road 5% 50/63/75mm 14 80/90mm 15 100/110mm 16 125/140mm 17 150/160/180mm 18 200/225mm 19 250/280mm 20 300/315mm 21 350mm 22 400mm 23 450mm 24 500mm 25 Add on above item no. 1 for C.C. Road 20% 50/63/75mm 26 80/90mm 27 100/110mm 28 125/140mm 29 150/160/180mm 30 200/225mm 31 250/280mm 32 300/315mm 33 350mm 34 400mm 35 450mm 36 500mm 37 Repairing of leakage in existing Distribution/Rising Main/Transmission Main CI/MS/DI pipe line up to 1.5 mtr depth of sizes as given below by digging out suitable size of pit at at site of work including taking out the burst pipe from trench, dewatering and providing adequate safety arrangement at site. This will also include cutting of pipe ends, fixing of pipe piece with jointing material, tightening of CID Joints to make repair leak proof and then refill the pit from excavated sand by ramming it at sides of pipe & upto ground level for entire job contractor will use his own T&P & labour and will arrange transportation of material required from Jen store. (Required material such as pipe piece, CID Joints shall be provided by Department free of cost) - In all type Soil- 80mm 38 100mm 39 125mm 40 150mm 41 200mm 42 250mm 43 300mm 44 350mm 45 400mm 46 450mm 47 500mm 48 Add on above item no. 4 for B.T. Road 5% 80mm 49 100mm 50 125mm 51 150mm 52 200mm 53 250mm 54 300mm 55 350mm 56 400mm 57 Add on above item no. 4 for C.C. Road 10% 80mm 58 100mm 59 125mm 60 150mm 61 200mm 62 250mm 63 300mm 64 350mm 65 400mm 66 Minor repair of leakages such as lead caulking, plugging, clamping and ring fixing in existing Distribution/Rising Main/Transmission Main AC/PVC/HDPE/CI/MS/DI pipe line up to 1.5 mtr depth of sizes as given below by digging out suitable size of pit at site of work including dewatering and providing adequate safety arrangement at site to make repair leak proof and then refill the pit from excavated sand by ramming it at sides of pipe & upto ground level for entire job contractor will use his own T&P & labour and will arrange transportation of required material from store. (Required material such as lead wool, white hump, plugs, clamps etc. shall be provided by Department free of cost)- In all type Soil- 50/63/75mm 67 80/90mm 68 100/110mm 69 125/140mm 70 150/160/180mm 71 200/225mm 72 250/280mm 73 300/315mm 74 350mm 75 400mm 76 450mm 77 500mm 78 Add on above item no. 7 for B.T. Road 5% 50/63/75mm 79 80/90mm 80 100/110mm 81 125/140mm 82 150/160/180mm 83 200/225mm 84 250/280mm 85 300/315mm 86 350mm 87 400mm 88 Add on above item no. 7 for C.C. Road 20% 50/63/75mm 89 80/90mm 90 100/110mm 91 125/140mm 92 150/160/180mm 93 200/225mm 94 250/280mm 95 300/315mm 96 350mm 97 400mm 98 Replacement of CI/ DI Double flange sluice valves,non return valves,butter fly valves etc. in existing Distribution/Rising Main/Transmission Main pipe line up to 1.5 mtr depth of sizes as given below by digging out suitable size of pit at site of work including providing and fixing MS Nut and Bolt and rubber gasket, dewatering and providing adequate safety arrangement at site and then refill the pit from excavated sand by ramming it at sides of pipe & upto ground level for entire job contractor will use his own T&P & labour and will arrange transportation of required material from store. (Required material such as Valve, Tail piece, CID Joints etc. shall be provided by Department free of cost)- In all type Soil- 80 mm 99 100 mm 100 125 mm 101 150 mm 102 200 mm 103 250 mm 104 300 mm 105 350 mm 106 400 mm 107 450 mm 108 500 mm 109 Add on above item no. 10 for B.T. Road 5% 80mm 110 100mm 111 125mm 112 150mm 113 200mm 114 250mm 115 300mm 116 350mm 117 400mm 118 Add on above item no. 10 for C.C. Road 5% 80mm 119 100mm 120 125mm 121 150mm 122 200mm 123 250mm 124 300mm 125 350mm 126 400mm 127 Removal of Choking from pipe line, including tree roots, malba, sand and otherby manually or other means, cleaning of line and testing in existing Distribution/Rising Main/Transmission Main AC/PVC/HDPE/uPVC pipe line up to 1.5 mtr depth of sizes as given below by digging out suitable size of pit at site of work including dewatering and providing adequate safety arrangement at site. This will also include cutting of pipe ends, fixing of pipe piece with jointing material and then refill the pit from excavated sand by ramming it at sides of pipe & upto ground level for entire job contractor will use his own T&P & labour and will arrange transportation of required material from store. (Required material such as pipe piece CID Joints shall be provided by Department free of cost)as per satisfaction of EIC. Rates for per pit.- In all type Soil -75mm 128 90/80 mm 129 110/100 mm 130 140/125 mm 131 180/160/150 mm 132 225/200 mm 133 250 mm 134 300 mm 135 Add on above item no. 12 for B.T. Road 5% 75mm 136 90/80 mm 137 110/100 mm 138 140/125 mm 139 180/160/150 mm 140 225/200 mm 141 250 mm 142 300 mm 143 Add on above item no. 12 for C.C. Road 5% 75mm 144 90/80 mm 145 110/100 mm 146 140/125 mm 147 180/160/150 mm 148 225/200 mm 149 250 mm 150 300 mm 151 Removal of Choking from pipe line, including tree roots, malba, sand and otherby manually or other means, cleaning of line and testing in existing Distribution/Rising Main/Transmission Main CI/MS/DI pipe line up to 1.5 mtr depth of sizes as given below by digging out suitable size of pit at site of work including dewatering and providing adequate safety arrangement at site. This will also include cutting of pipe ends, fixing of pipe piece with jointing material and then refill the pit from excavated sand by ramming it at sides of pipe & upto ground level for entire job contractor will use his own T&P & labour and will arrange transportation of required material from store. (Required material such as pipe piece CID Joints shall be provided by Department free of cost)as per satisfaction of EIC. Rates for per pit.- In all type Soil- 80mm 152 100 mm 153 125 mm 154 150 mm 155 225/200 mm 156 250 mm 157 300 mm 158 Add on above item no. 15 for B.T. Road 5% 80mm 159 100 mm 160 125 mm 161 150 mm 162 225/200 mm 163 250 mm 164 300 mm 165 Add on above item no. 15 for B.T. Road 5% 80mm 166 100 mm 167 125 mm 168 150 mm 169 225/200 mm 170 250 mm 171 300 mm 172 Add on above item no. 1.6.1 if depth of pipe line is above 1.5 mtr upto 3.0 Mtr 173 100 mm 174 125 mm 175 150 mm 176 225/200 mm 177 250 mm 178 300 mm 179 Disconnection of water connection from existing pipe line in all type of soils up to 1.5 mtr depth by digging out suitable size of pit at site of work, with cutting of service line and refixing of clamp revolving it 180 degree refill the pit from excavated sand by ramming it & upto ground level for entire job contractor will use his own T&P & labour. 180 Add on above item no. 18 for B.T. Road 5% 181 Add on above item no. 18 for CC Road 10% 182 Removal of sluice valve in existing pipe line up to 1.5 mtr depth by digging out suitable size of pit at site of work including dewatering and providing adequate safety arrangement at site. This will also include cutting of pipe ends, fixing of pipe piece with jointing material to make repair leak proof and then refill the pit from excavated sand by ramming it at sides of pipe & upto ground level for entire job contractor will use his own T&P & labour and will arrange transportation of required material from store. (Required material such as pipe piece CID Joints shall be provided by Department free of cost) In all type Soil - 80 mm dia pipe to 100mm 183 125 mm dia pipe to 150mm 184 200 mm dia pipe to 250mm 185 300 mm dia pipe to 350mm 186 400 mm dia pipe 187 450 mm dia pipe 188 500 mm dia pipe 189 Add on above item no. 21 for B.T. Road 80mm dia pipe to 100mm 190 125 mm dia pipe to 150mm 191 200 mm dia pipe to 250mm 192 300 mm dia pipe to 350mm 193 Add on above item no. 21 for C.C. Road 80mm dia pipe to 100mm 194 125 mm dia pipe to 150mm 195 200 mm dia pipe to 250mm 196 300 mm dia pipe to 350mm 197 Work of Inter Connection in AC/PVC/HDPE pipe line up to 1.5 mtr depth by digging out suitable size of pit at site of work including dewatering and providing adequate safety arrangement at site, cutting of existing pipeline, jointing of Tee (complete) and other specials to make inter connection repair leak proof and then refill the pit from excavated sand by ramming it at sides of pipe & upto ground level for entire job contractor will use his own T&P & labour and will arrange transportation of material required from store. (Material such as Tee/ Tee Clamp/rubber sheet/ CID joints required for inter connection shall be provided by the department free of cost). In all type Soil- 80 mm to 110 mm 198 125 mm to 165 mm 199 200 mm to 300 mm 200 Add on above item no. 24 for B.T. Road 5% 80mm to 110mm 201 125 mm to 165 mm 202 200 mm to 300 mm 203 Add on above item no. 24 for C.C. Road 5% 80mm to 110mm 204 125 mm to 165 mm 205 200 mm to 300 mm 206 Work of Inter Connection in CI/DI/MS pipe line up to 1.5 mtr depth by digging out suitable size of pit at site of work including dewatering and providing adequate safety arrangement at site, cutting of existing pipeline, jointing of Tee (complete) and other specials to make inter connection repair leak proof and then refill the pit from excavated sand by ramming it at sides of pipe & upto ground level for entire job contractor will use his own T&P & labour and will arrange transportation of material required from store. (Material such as Tee/ Tee Clamp/rubber sheet/ CID joints required for inter connection shall be provided by the department free of cost).- In all type Soil- 80 mm to 100 mm 207 125 mm to 150 mm 208 200 mm to 300 mm 209 350 mm to 450 mm 210 Add on above item no.27 for B.T. Road 5% 80mm to 100mm 211 125 mm to 150 mm 212 200 mm to 300 mm 213 350 mm to 450 mm 214 Add on above item no.27 for C.C. Road 5% 80mm to 100mm 215 125 mm to 150 mm 216 200 mm to 300 mm 217 350 mm to 450 mm 218 Labour charges for removal of complaint of polluted water supply to the consumers - Survey of the locality of polluted water supply for preliminary assessment of source of pollution during supply hours 219 Labour charges for digging of pit of suitable size for removal of water pollutiononexisting distribution AC/PVC/uPVC/HDPE pipe linesup to 1.5 mtr depth including cutting of pipe and assessment of direction of flow of polluted water during non supply hours, identifying the source of pollution and repairing of fault in pipe line byfixing of pipe piece with jointing material (pipe and jointing material shall be supplied by department) to make it leak proof and then refilling the pit from excavated sand by ramming it at site of pipe upto ground level. The rate includes all labour charges to complete the work for pipe size - In all type Soil- 50 to 75 mm 220 80-110 mm 221 125 to 165 mm 222 200 to 300 mm 223 350 to 400 mm 224 Add on above item no.31 for B.T. Road 5% 50 to 75mm 225 80-110 mm 226 125 to 165 mm 227 200 to 300 mm 228 350 to 400 mm 229 Add on above item no.31 for C.C. Road 10% 50 to 75mm 230 80-110 mm 231 125 to 165 mm 232 200 to 300 mm 233 350 to 400 mm 234 Labour charges for digging of pit of suitable size for removal of water pollution onexisting distribution CI/DI/MS pipe linesup to 1.5 mtr depth including cutting of pipe and assessment of direction of flow of polluted water during non supply hours, identifying the source of pollution and repairing of fault pipe line byfixing of pipe piece with jointing material (pipe and jointing material shall be supplied by department) to make it leak proof and then refilling the pit from excavated sand by ramming it at site of pipe upto ground level. The rate includes all labour charges to complete the work for pipe size - In all type Soil- 80-100 mm 235 125 to 150 mm 236 200 to 300 mm 237 350 to 450 mm 238 Add on above item 33 for B.T. Road 5% 80-100mm 239 125 to 150 mm 240 200 to 300 mm 241 350 to 450 mm 242 Add on above item 33 for C.C. Road 5% 80-100mm 243 125 to 150 mm 244 200 to 300 mm 245 350 to 450 mm 246 Restoration of bitumen road by patch work of WBM using crushed / broken aggregate as per the standard specification and consolidation with hand rammer spreading and consolidation of binding material , cleaning of surface of WBM and providing of seal &tack coat as per site condition by using ready cold mixup to the satisfaction of engineer in charge.The rate includes the makingof pit in regular shape, all labour, material and T&P charge complete job. 247 Restoration of cement concreteroad including making of pit in regular shape, ramming and consolidation of surface, laying, positioning and compactingcement concrete ( M-20 ) minimum thickness 200 mm upto the satisfaction ofengineer incharge.The rate includes the makingof pit in regular shape, all labour, material and T&P charge complete job. 248 Filling with locally available river sand at all levels including watering ramming consolidating and dressing complete including cost of sand. RUIDP 2017 249 Welding on M.S. / G.I./CI Pipes and other material by Electric Welding, this includes all the material like welding rods/ equipment like welding machine/ generater, if required for job. On site
