|
| 1 | Earth work in excavation by mechanical means (Hydraulic Excavator)/manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sum on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter.All kinds of soils |
| 2 | Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in:Cement Mortar 1:6 ( 1-Cement : 6-Sand). |
| 3 | Random Rubble stone masonry with hard stone insuperstructure above plinth level and upto five level above 30cm. thick walls in :Cement Mortar 1:6 ( 1-Cement : 6-Sand). |
| 4 | Stone work (machine cut edges) for Wall cladding/ Veneering work up to 10m height with 20 to 30 mm thick Red Sand Stone (Karauli ) and backing filled with a grout of 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing by means of cramps which shall be paid separately)Exposed face machine cut |
| 5 | Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). |
| 6 | Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). |
| 7 | Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide |
| 8 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape whenever required.1.00 mm thick with zinc coating not less than 275 gm/m2 |
| 9 | Kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand)For area of each slab from 901 to 2000 Sq.Cm : |
| 10 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement : 3 coarse sand ) including making joints with without grooves (thickness of joints except at sharp curve shall not to more than 5mm) including making drainage opening wherever required complete including painting etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineerin- charge). |
| 11 | Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc. |
| 12 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level.M20 grade Nominal Mix1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stoneaggregate 20mm nominal size). |
| 13 | Providing and fixing of Reinforced Ferro cement Drain cover designed for class \"AA\" loading duly marked on cover with adequate steel reinforcement having thickness 75 mm to 150 mm anti- corrosive bitumen painted M.S. plate Rim and on M.S. lifting hooks admixture like plasticizer bond improving compound shrinkage resistance compound abrasion resistant complete as per approved design etc. for drain Opeining Size 701 to 1200 mm Standard Drain Cover Size 1500mm x 600mm x 125mm |
| 14 | Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding.New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). |
| 15 | Providing, Laying & Jointing in standard lengths HDPE PE-80 PN-6 pipes conforming to IS-4984:1995 (UP TO DATE) with necessary jointing material like mechanical connection i.e. thread/insert/quick release coupler joint/compression fitting joint of flanged joint and specials jointing pipe by butt fusion welding method, including all taxes (central and local), transportation and freight charges inspection charges loading/unloading charges, stacking the same in closed shade duly protecting from sunray and rain including cost of labour and material, specials (Tees, bend etc.) and also including the excavation of trench up to 1.5 Meter depth in all type of soil cutting of road surface pavement where required lift up to 1.5- Mt. stacking the soil clear from the edge of excavation and refilling of soil after laying and jointing of pipe line with proper compaction and disposing of all surplus soil as directed with in lead of 50 Meter with satisfactory, hydraulic testing etc. complete as per technical specifications and direction of Engineer-in-charge. (supply up to 90 mm dia. Coil & above 90 mm dia straight length in 6.0 M)90 MM Dia |
| 16 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :One or more coats on old work. |
| 17 | Green / Black1501 Cm2 to 3600 Cm2 Tiles |
| 18 | Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish :20mm thick. |
| 19 | COCKS, MIXERS, DIVERTORS & VALVESNote :(a) The rates are for ISI marked item.(b) If the items are Non-ISI marked, reduce the rate by 25%.P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make:C.P. Brass Long nose, 15mm nominal bore weight not less than 810 gm |
| 20 | Dismantling tile work in floors and roofs laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meter lead:For thickness of tiles 10mm to 25mm. |
| 21 | Filling the gap upto 5 mm depth and 5 mm width in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. |
| 22 | Extra for providing edge moulding to 15-18mm thick marble/ Granite stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.Granite Work |
| 23 | SITC of radial / mixed flow submersible motor pump sets ISI marked (IS:8034-1989) of approved make with required accessories including making connection suitable for T.W./ D.C.B./ Open well. The job includes lowering of riser pipe, G.I./ H.D.P.E. pipe with rope, cables, installation of complete fitting and accessories, jointing of electrical cables up to switch board. All labour for testing of submersible pumps set and supply of water to water mains, complete in all respect.100 mm diameter Submersible pump shall have following HP Rating, phase, Head, minimum Discharge respectively. 5.0 HP, 3-Ø, (55-150)Mtr, (166-60)LPMComplete Rate Group-I |
| 24 | SITC of Cutting back up surface up to 2 Mtr. Depth by digging by Bogi including all layers of crust for laying pipe line etc. and making good to original condition (excluding cost of bitumen) |
| 25 | Providing laying & Jointing of ISI mark centrifugally cast (Spun) ductile iron pressure pipe for water with socket and spigot end and Tyton joint confirming to IS 8329/2000 and departmental specification in standard length (As required) for (Class K-7) suitable for push on joint (rubber gaskets jointing) with side cement mortar lining with cutting of pipe and fixing of C.I. special joint where ever required. This also include the excavation of trench up to 1.5 Meter depth in all type of soil cutting of road surface pavement where required lift up to 1.5 Mt. stacking the soil clear form the edge of excavation and refiling of soil after laying and jointing of pipe line with proper compaction and disposing of all surplus soil as directed with in lead of 30 Meter. This also include getting the pipe line tested and site clearance etc.(D-878 dt.01.09.2008)150 mm |
| 26 | Dismantling Stone Masonry as per MoRD Specification Clause 202. Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of stone masonry, including disposal of unserviceable material and stacking the serviceable material with all lift and lead of 1000 m as per MoRD Specification Clause 202. Rubble Stone Masonry in Cement Mortar |
| 27 | Dismantling of Flexible Pavements Dismantling of Flexible Pavements and disposal of dismantled materials upto a lead of 100 m, stacking serviceable and unserviceable materials separately as per MoRD Specification Clause 202By Mechanical MeansBituminous Courses |
| 28 | Scraping Plaster in Lime or Cement Mortar from Brick/Stone Masonry as per MoRD Specification Clause 202. |
| 29 | Brick work in Super Structure for wall with Special hand made brick of size 230x112x75 mm (Pioneer make), having compresive strength > 400 Kg/cm2 & Water absorption < 8%, as per approved sample in CM 1:4 including making horizontal & vertical grooves 10 mm wide complete in all respec as perspecification & as directed by Engineer in charge. at all levels. |
| 30 | Providing & laying chokha red stone flooring using average stone size 1000x400x50 mm with in 110.000 sqm approved pattern & design laid over 20 mm thick of CM 1:4 with grooved joint as per e in required slope including raking & finishing of joints etc complete in all respect & as directed by Engineer incharge |
| 31 | Supply, Installation, commissioning and testing of 15 HP Monoblock submersible pump of Kirloske, AC 3 phase 380/440 Volt, 50 cycle, each supply with foundation bolt, suction stainless steel mesh filter cover with 10 Mtr. Of 2.5 sq mm submersible cable duly insulated.( Head 22-32m and Discharge 3.5-7.8 LPS |
| 32 | P/F 25 mm dia Bamboo Railling fixed on side, clamps &hooks & other necessary fixing arrangement, in required pattern, finishing with Paint etc complete in all respect, at all levels as per direction of engineer incharge. |
| 33 | Supply and Fixing of signage board having Digital Vinyl Print with gloss lamination & pasted on 3mm ACP sheet and with instalation and transportatin complete in all respect as per direction of Engineer in charge. |
| 34 | Providing and fixing glass mosaic tiles of (20mmx20mmx4mm) as per design and as per approved pattern & shape including necessary fixing arrangement, with all levels etc. complete in all respect & as directed by Engineer in charge |
| 35 | Providing and fixing of self closing spring loaded quick coupling 1 1/2\" hydrant ;made of Aluminium alloy doly procted ints main parts by brass stainless steel and techno polymors & having self closing thermoplastic hinged lid for Gear driven Rain Gun Sprinkler |
| 36 | Providing and fixing or 1-1/2\" alluminium alloy hydrant key for Impact type Rain Gun Sprinkler |
| 37 | Providing and fixing or M.S. service shaddle including fasteeners complete 90 mm x 1,5\" |
| 38 | Painting with PU paint of approved brand and manufacture to give an even shade Two or More coats on new work |
| 39 | Providing and laying Brick on edge flooring in pathway along stream in Bhaskar valley, using Machine made bricks of size 230.x.112 x 7.5 mm. having compressive strength > 400 kg/cm² & Water absorption <8% (Pioneer or equivalent make), laid over 20mm thick bed of Cm 1:4 in require pattern & design and as per drawing, finished with white CM 1:3 mixed with pigment of matching shade etc. complete in all respect as per specification & as directed by Engineer in charge. |
| 40 | Providing arid fixing combination flooring for pathways and in beds of stream and ponds using WHITE/GREEN/RED/BLACK RIVER PEBBLES embedded in cement sand mortar 1:4 mixed w pigment of matching shade etc., complete in all respect & as directed by Engineer in charge. |
| 41 | P/F 75 mm thick & of size 250 x 600 mm polished Black Kaddapa stone dasa with gola, laid over 20 mm thick base of CM 1:4 as per enclosed drawing No 04 including making gola, raking & finishing of joints to match the colour of stone etc complete in all respect & as dirceted by Engineer incharge. |
| 42 | Providing & fixing Bidasar & Chittor Boulders for annicuts, side walls protection of stream, properly aid, embeded/interlocked & jointed as directed by engineer incharge. Using boulder size 2‘x1to 1 1/2‘x1‘ weight> 75 Kg |
| 43 | supply & fixing ornamental sculpture made up of fibre glass as per approved pattern, Shape, Carving & painting work including necessary fixing arrangement with all levels etc. complete in all respect as per direction of Engineer in charge.Crocodile (size 5‘ long) |
| 44 | supply & fixing ornamental sculpture made up of fibre glass as per approved pattern, Shape, Carving & painting work including necessary fixing arrangement with all levels etc. complete in all respect as per direction of Engineer in charge.Duck (size 2‘ long) |
| 45 | supply & fixing ornamental sculpture made up of fibre glass as per approved pattern, Shape, Carving & painting work including necessary fixing arrangement with all levels etc. complete in all respect as per direction of Engineer in charge.Makau Parrot (size 2‘ long) |
| 46 | P/F 50 mm thick, fine dressed, chokha Red Jodhpur sand stone coping with gola, laid over 20 mm thick base of CM 1:4 as per enclosed drawing No 07 & 09 in required slope including making gola, raking & finishing of joints to match stone shade etc complete in all respect & as directed by Engineer in charge. |
| 47 | Waterproofing Treatment work with two-component, solvent-free, thixotropic coating, based on high quality elastomeric polyurethane resins: SURFACE PREPARATION: Thoroughly brush and clean all laitance, loose particles such as dirt, grease, mortar droppings, release agents, efflorescence, bird droppings, etc. Non-moving cracks having width up to 5 mm must be filled with PU sealant, and cured the surface for 24 hours. APPLICATION Apply two component epoxy Primer of Dr. fixit Tank Prime on the entire surface and air cured the surface for 8-10 hours. Apply Two coats with two-component, solvent free, thixotropic coating Polyurethane coating of Dr. Fixit Tank Pro Won the entire surface and air cured the surface for 72 hours |
| 48 | Floating Wetland modules specifically engineered with complex habitat types for the water shrew and other local species including: Modules with planting lanes. High buoyancy aprox.30Kg per sq.mt. Modules having longevity (>>10 years) of Heavy-duty marine-grade materials like 316 Stainless Steel andHDPE tubing structure and coir matrix with zero waste production, ensuring durability and longevity. Design flexibility with interlocking shapes and quick-connect SS flanges. Increased nutrient uptake with media columns. Minimum 10 No. per sq.mt. live perennial plant plantation. Includes 5 years free of cost maintenance which includes replacement of any broken or damaged parts and plants if required. |
| 49 | Anchoring of floating wetland designed to accommodate site conditions, including fluctuating water levels, vertical edges, and strong currents by using Concrete(M20) block size 300x300x150mm with steel anchor and 20mm thick Polypropylene rope. |
| 50 | Providing of free standing flood barriers made ofpolypropylene havingself-anchoring without additional fixings to immediately redirects the flowing water when required and having properties i.e quick and easy to deploy, suitable for use on firm even surfaces including tarmac, brickwork, concrete,paving and even on grass. Barriers should be lightweight and stackable for easy transportation and storage,easily washed down after use, ready for future deployment.Specifications: Damming ability: 50cm Dimensions of boxes : L: 980mm W:680mm H:530mm Effective Length: 900mm per box Weight: 6.1kg (13 lb) per box Speed of Deployment: 200m per hour Min. Curve Radius: 1m (In both directions) Material: Polypropylene Temperature Resistance: -30°c to +90°c |
| 51 | Providing and placing BLACK BEHRORE/KUNDKHORI SLATE 10-12 mm thick for stream bed/cladding along pathways size above 450 sq.cm. embedded in cement sand mortar 1:4/Adhesive compund mixed with pigment of matching shade etc., complete in all respect & as directed by Engineer in charge. |
