|
| 1 | Work |
| 2 | Earth work in cutting or in embankment in ordinary soil,excavation to be in the form of regular pit not exceeding 1/2 metre(20\"\") in depth and earthwork in embankment to be 20 cm (8\"\") layers including ramming and dressing the surface to required levels and slopes and also including 1.5 mts lead. The earth form cutting to be used in making embankment or to be desposited on spoil banks withen 30 m. (100 ft.) distance as directed by the Engineer-in-charge As per S.I. No 253 |
| 3 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with threewheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, stone screening/binding material to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per Technical Specification Clause 405. |
| 4 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with threewheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, stone screening/binding material to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. |
| 5 | Providing and applying primer coat with emulsion (SS) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means as per Technical Specification Clause 502 |
| 6 | Providing and applying tack coat with Bitumen (VG-10) using bitumen distributor at the rate of 0.35 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503. |
| 7 | Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A as per Technical Specification Clause 508 |
| 8 | Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C,as per Technical Specification Clause 510 |
| 9 | Brick edging 7 cm wide on both sides of the road With Staraight over burnt bricks complete as per PWD specification no. 20.15 |
| 10 | Supply and fixing of informatory M.S. sighn board size 1.20x0.90 mtr made of 18 gauge M.S. sheet in ISA 40x40x5 mm fraim supported in back side of 40x5 mm flat iron or on all of 2.15 mm with 150 mm long horizontal log (hold fast) at bottem braced with 40x5 mm flat iron 1.98 meter long electrically welded and painted with one coat primer. as S.I.No 503. |
| 11 | Painting two coat with super synthetic enamel paint as NBO. 19.29 and S.I. No 642, letter wrinting size above 8 cm up to 15 cm as per 9© and no 20 B and fixing of sign board with c.c. 1:4:8 with S.I. No 305(a) and slso transportation at site complete in all respect. |
| 12 | Provision of inauguration or Openingproject including diging foundation layig c,c, in 1:6:12 as per S.I.No 273, brick work in 1:4 with S.I. No 305a, plaster in 1:4 with S.I. No 584. and snowcem S.I. No 660 including fixing 60x75 cm sixe 20 mm thick granite stone with digged letter including cost of polishing complete in sll respect. |
