Tender For “Various System Strengthening Works Under Business Plan- 2025-26 Under The Jurisdiction Of E.E, Eudd-Thakurganj, Lesa, Central Zone, Lucknow
Tender Value
Ref. Documents
Estimated cost
Bid Submission
11 Jun 2025
0 days left
EMD
12000
Bank guarantee accepted
Document Fee
3540
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
thakurganj → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For “Various System Strengthening Works Under Business Plan- 2025-26 Under The Jurisdiction Of E.E, Eudd-Thakurganj, Lesa, Central Zone, Lucknow
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 29-May-2025 | Date Extend 2 | Date | 04-Jun-2025 |
| 2 | 04-Jun-2025 | Date Extend 3 | Date | 11-Jun-2025 |
BOQ
| Sl. No. | Item Description |
| 1 | Safe carriage loading unloading with proper stacking of following materialfrom ESC Daliganj to Work Site/JE dump store. |
| 2 | 11/0.4 KV 250/400 KVA T/F |
| 3 | 11 KV XLPE Cable AL (3*70)Sqmm. |
| 4 | 11 KV Cable (3*70) O/D Jointing Kit |
| 5 | LT XLPE Cable Al (1x400)sqmm. |
| 6 | LT XLPE Cable Al (1x240)sqmm. |
| 7 | LT ABC (3x120+1x95+1x16)Sqmm. |
| 8 | 11 KV Complete Polymer Pin Insulator 45 KN |
| 9 | 11 KV DO Fuse Set with fixing clamp |
| 10 | ST Pole 11 Mtr Long |
| 11 | Installing, commissioning of 250/630 Kva Transformer including its connection in between 11 Kv line and LT line mounting of copper L-Piece 300x65x6 mm providing Al crimping lugs of size 250 mm²( All the materials except T/f will be arranged by the contractor) |
| 12 | Construction/ Repairing of T/F plinth of size 2x2x1.5 m on a padding 0.25M deep in ground 1:5:10 cemend sand and brick ballast on the top of padding brick work Ist class brick of 0.95 mtr hight & 0.35 mtr wall will be constructed. Rest wall should be 0.23 mtr thick.brick work in ratio 1:4 cement & cores Sand in the hollow portion the sand should be filled from the ground level up to 15 centimeter below from the top of wall,Cement,sand & brick Ballasts should be filled up to 15 centimeter.Two no. of channel 100x50 in length 1500mm will be grouded.0.35 CM.RCC will be done with cores sand, cement and stone ballast in the ratio of 1:2:4.The t/fs plinth should be plastered on all sides 12mm thick in ratio 1:6 by cement and cores sand. (All the material will be arranged by the contractor .) |
| 13 | Construction of missionary type Distribution Pillar box with first class brick ballast cement, coarse sand, local sand, brick ballast and MS Round bar of 10 mm dia including Straight MS Angle 50X50X6X750 mm- (All the material will be arranged by the contractor). |
| 14 | ChemicalEarthing for Transformer withouterpipe diameter50mm,innerStrip40x6,length3000 mm. galvanization up to 200 micro, earthing pipe withcrystallineconductivemixturefilledinside thepipewithanti-corrosion&highconductive alongwith50Kg(As perrequired) ofBFC which should be capable to reducing the soil resistively with good moisture retaining capacity.(Specificationofchemicalearthingand drawing is hereby enclosed). All material shall by supply by the contractor. |
| 15 | Erection, Grouting, plinthing, earthing of Single STP 11 Mtrincluding mounting of clamps and connectors for stringing and sagging of Aerial Bunched Conductor (Only pole will be provided by the department). |
| 16 | Construction of retaining wall, fabrication & erection of Wire mesh fencing around Transformer and Distribution Pillar Box with retaining wall & 1 no. gate with locking arrangement made of MS Angle iron of size 50x50x6 mm jointed with nuts and bolts. The panel must be supported with MS Flat of size 50x6 mm.Wiremesh of size 8 SWG rectangle type, its painting as per norms of RESSPO.(All the material will be arranged by the contractor at his own cost). |
| 17 | Hoisting of 11 KV 3x185 sqmm XLPE Cable (All the material will be arranged by the contractor at his own cost except cable). |
| 18 | Cable laying of 11 KV 3x70 sqmm XLPE Cable in normal soil by digging of trench 700 mm deep 500 mm wide including supply of required materials as fine sand, 1st class bricks,stone slab. (All the material will be arranged by the contractor at his own cost except cable). |
| 19 | Laying of LT XLPE cable of size 1x240/400 Sq. mm in between T/F and distribution pillar box to LT Pole its proper connection & jumpering. (Only cable will be provided by the department) |
| 20 | Erection & commissioning of ABC including its proper stacking. (ABC will be provided by the Department, Clamps & Connectors will be arranged by the Contractor ) |
| 21 | High Pressure testing of 11 KV 3x185 sqmm. XLPE cable with DC voltage at 18 KV with hold up to 5 minutes. (All the material will be arranged by the contractor). |
| 22 | Supply and fixing of followings items |
| 23 | Dropper Channel (100x50x2028) |
| 24 | Top Channel (125x65x2240) |
| 25 | AL Lugs (400 KVA) |
| 26 | Copper L Piece (250 KVA) |
| 27 | Clamp with Nuts Bolt and washers |
| 28 | Complete Tailless LT Fuse Unit Set 500 Amp. |
| 29 | 11 KV Danger Board with clamp |
| 30 | Eyehook With Clamp |
| 31 | Copper Strip for making LT Bus bar |
| 32 | Earthing complete rod and 6 swg GI Wire Earthing |
AI Tender Summary
Tender Timeline
Jun 04, 2025
11:30 IST
Tender Published
Tender notice published.
Completed
Jun 04, 2025
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jun 11, 2025
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedJun 11, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 11, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender