|
| 1 | Dismantling posts or struts (wood, steel or R.C.C.) any section, embeded in concrete including taking out embedded portion and making good disturbed ground complete all as specified and as directed. |
| 2 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 3 | Dismantling fencing wire mesh anytype and sizecomplete all as specified and directed. |
| 4 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out and getting out in soft/loose soil complete all as specified and as directed. |
| 5 | M&L for providing plain cement concrete type D-2, 1:4:8using (40mm graded stone aggregate ) as in foundation and mass filling complete all as specified and as directed. |
| 6 | M&L for rolled mild steel Fe-410 (Grade E-250A) angle or tee section as in post, cut to length and bend to shape as directed, fixed independetly without connecting plate etc, including provision of 05 to 06 Nos. gaps/ cuts/ holes in each post for providing/ laying barbed wire complete all as specified and as directed.(Note :- Barbed wire shall be measured and paid separately under respective item) |
| 7 | M&Lforframed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing using Fe-410W (Gde E-250) quality B complete all as specified and directed. |
| 8 | S&F for MS bolts and nuts purpose made with hexagonal or square head one end and screwed the other, or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nuts exc 30cm long of not exeeding 12 mm dia of bolts complete all as specified and as directed. |
| 9 | M & L Round Bar 10mm dia and over cut to length bent to shape required and binding with and including MS wire within (annealed) not less than 0.9mm dia or securing with clips using (FE410 (Gde.E-250) quality-A or Fe 290 (Gde - E-165) complete all as specified and as directed. |
| 10 | Supply and fix galvanised , 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and staining and fixing to any type of standard rails, straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as specified and as directed. (Note :- Each line of wire shallbe measured seperately) |
| 11 | Supply and fixing PVC coated GI chain link fencing of required width in mesh size 50mm X 50 mm made with GI wire of dia 4 mm and PVC coated to achieve outer dia not less than 5 mm in required colour and shade including strengthening withnuts, bolts and washers complete all as specified and directed. Note :- Nuts , bolts and washer shall be measured and paid seperately under respective. |
| 12 | M&L for preparation of new steel or iron surface of any description, exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete and all as specified and directed. |
| 13 | M&L for preparation of new steel surfaces of any description, not exceeding 10cm in width or girth when unconnected and applying two coat of synthetic enamel paintover a coat of red oxide primer complete and all as specified and directed. |
