Tender For Civil conservation and painting work in Block No. 3 and 4 of MLA Niwas-4 (Royal Hotel) - Dismantlingoldplasterorskirtingrakingoutjointsandcleaningthe surface for plaster including disposal of rubbish to the dumping ground within 50 metres DSR 15.56 2 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand) DSR 13.2.1 3 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.(D.S.R Item-13.80) 4 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour :Newwork(twoormorecoats)overandincludingwater thinnable priming coat with cement primer having VOC content less than50 gram/litre DSR 13.41 5 Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brandandmanufacturerincludingapplyingadditionalcoatswherever required to achieve even shade and colour ( Old work one or more coats) DSR13.81.1 6 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. (DSR 13.91) 7 Providing and fixing C.P. Brass extension nipple (size 15 mm x 50 mm) ofapproved make and quality as per direction of Engineer-in-charge. DSR 18.53A 8 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :( One or more coats on old work)(DSR13.99.1) 9 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.( For thickness of tiles 10 mm to 25 mm) DSR15.23.1 10 Providing and laying in position cement concrete of specified grade excluding the cost ofcentering and shuttering - All work up to plinth level :1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)DSR4.1.2 11 ProvidingandfixingG.I.PipescompletewithG.I.fittingsandclamps, including making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall :(15 mm dia nominal bore ) DSR18.11.1 12 ProvidingandfixingG.I.pipescompletewithG.I.fittingsincluding cutting and making good to the wall etc.Internal work 25 mm dia nominal bore(Exposed on Wall )DSR18.10.3 13 ProvidingandfixingG.I.UnioninexistingG.I.pipeline,cuttingand threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : (15 mm nominal )DSR 18.47.1 14 ProvidingandfixingG.I.UnioninexistingG.I.pipeline,cuttingand threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : ( 20 mm nominal bore)DSR 18.47.2 15 ProvidingandfixingG.I.UnioninexistingG.I.pipeline,cuttingand threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : ( 25 mm nominal bore)DSR 18.47.3 16 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain&brassthreadedfittingsandfixingthepipewithclampsat1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc 20 mm nominal dia Pipes)DSR 18.8.2 17 Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.(DSR 11.40) 18 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.(DSR 8.31) 19 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.Size 600x600(DSR 11.41.2 ) 20 Renewing glass panes, with wooden fillets wherever necessary: Float glass panes of nominal thickness 5 mm (weight not than 12.5kg/sqm)DSR14.6.2 21 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.(DSR 9.83) 22 Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia wire and 1.4 mm wide aperture with matching wood beading (DSR -9.7.8) 23 Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part 1) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply vereering with vertical grains or cross bands and face veneers on both faces of shutters:30 mm thick including ISI marked Stainless Steel bolt hinges with necessary(DSR -9.21.2) 24 Providing 40x5 mm flat iron hold fast 400 mm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 300x100x150mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).(DSR -9.53) 25 Providing and fixing brass curtain rods ofwall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete.(25 mm diameter.)DSR14.28.2 26 Cutting Holes up to 15x15 cm in RCC floors and roofs for passing drain pipe etc , and repairing the holes after insertion of drain pipe etc with cement concrete 1:2:4 ( 1 cement:2coarse sand : 4 graded stone aggregate 20 mm nominal size ) , includinmg finishing complete so as to make it leak proof.(DSR 18.77) 27 Providing and fixing ISI marked IS:1341 M.S. pressed butt hinges bright finished with necessary screws etc. 100x58x1.9mmcomplete (DSR9.55.2) 28 Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete (Copper oxidised as per IS 1378). 300x16(DSR -9.62.1) 29 Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete (Copper oxidised as per IS 1378). 250x16 mm (DSR -9.62.2) 30 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378). 250x10 mm(DSR -9.63.1) 31 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378). 200x10 mm(DSR -9.63.2) 32 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (Copper oxidised as per IS 1378). 125 mm (DSR -9.66.1) 33 Providing and fixing bright finished brass lower bolts (barrel type) with necessary screws etc complete. 250x10 mm(DSR -9.74.1) 34 Providing and fixing bright finished brass lower bolts (barrel type) with necessary screws etc complete. 200x10 mm(DSR -9.74.2) 35 Providing and fixing C.P.Brass bib cock of approved quality conforming to IS: 8931 15 mm nominal bore ( 18.49.1) 36 Providing and fixing C.P. Brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931 ( 15 mm nominal bore)DSR 18.53.1 37 Providing and fixing water closet squaiting pan (indian type W.CPan) with 100 mm sand cast Iron P or S trap. 10 liter low level white P.V.C flushing cistern. Including flush pipe, with manually controlled device (handle lever) conformingto IS : 7231, with all fittings and fixtures complete. Including cutting and making good the walls and floors wherever required white Vitreous chin orissa pattern W.C. Pan of size 580x440 mm with integal typefoot rests. (DSR17.1.1) 38 Providing and fixing wash basin with C.l. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require. White Vitreous china Wash basin Size-630x450 mm with a pair of 15 mm C.P. brass pillar taps. (17.7.1) 39 Providing and fixing PVC low level flushing cistern with manually controlled device (handle lever) Conforming to IS : 7231with all fittings and fixtures complete 10 litre capacity white.(17.18.1). 40 Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete. Semi rigid pipe 32mm dia (17.28.1.1). 41 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass Screws and washers complete. (DSR17.31). 42 Providingandfixing600x120x5mmglassshelfwithedgesroundoff, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 43 Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge (DSR 1.1.18) 44 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :( Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture)(DSR13.62.1)
