Tender For Urgent Repair Works At Amber Palace, Jaipur - Carriage Of Building Rubbish Stone Metal (Grit And Ballast Etc.) With A Lead Of 10 Kms. (G-4.1/4.2) Providing And Laying In Position Cement Concrete Including Curing, Compaction Etc., amber-Rajasthan

tender for Urgent Repair Works At Amber Palace, Jaipur - Carriage of Building Rubbish Stone metal (Grit and ballast etc.) with a lead of 10 kms. (G-4.1/4.2) Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering All work up to plinth level. M15 grade Nominal Mix 1:2:4 (1 cement: 2 coarse sand 4 graded stone aggregate 20mm nominal size).(B 3/31 21 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M10 grade Nominal Mix 1:3: 6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) (R-3/314) Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete Old Plastered Surface (two or more coats) Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding: (a) Old work (One or more coats) (B-12/12.40.2) Painting with synthetice enamel paint of approved brand and manufacture to give an even shade: (b) One or more coats on old work. (B-12/12.46.2) Supply of Labour as per requirment with required Tools & plants (a) Fitter (grade 1) (Code no.116) (b) Beldar(Code no.114) Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778: 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer in Charge. (External work). 20mm nominal size (S-2/2.37.2) 25 mm nominal size (S-2/2.37.3) Providing and fixing Superior quality CP Brass fittings of approved make as per direction of Engineer-in-charge Long body Bib Cock 15 mm nominal size P&F rigid PVC Pipe (IS:4985 mark) class II/ (4) Kg. /Cm².) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. (a 75 mm dia(S-3/3.16.3) (b) 110 mm dia(S-3/3.16.3) Supplying & Fixing R.C.C. Manholes covers with frame of approved make (Light duty). (a)Size 600 X 450mm (S-3/3.33.5) (b)Size 450 X 450mm(S-3/3.33.6) P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: Door Tee 110mm dia(S-3/3.17.4(i)) Bend 87.5 75mm dia(S - 3/3.17 * 0.9(i)) 110mm dia(S-3/3.17.9(ii)) Door Bend (Top Side) 110mm dia(S-3/3.17.10(i)) Barricading with Sal ballies as per design including tying with vertical post by coconut strings including digging out holes in all types of soil complete in all respect with two horizontal members height 1.2 m upto 1.5m above ground level and vertical supports upto 2.5 centre and upto 3 days period including removal and cleaning the site complete in all respect & including dressing of sides and providing retro reflective tapes for traffic safety as per direction of Engineer-in charge in all types of soil. (S - 5/5.18) Add extra for item No. 5.18 & 5.19 in barricading for each subsequent day after 3 days(S-5/5.20) P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make Gun-metal 50 mm nominal bore. (S - 2/2.15 * 0.6) French sprit polishing : (b) One or more coats on old work B - 12/12.48 * 0.2 ). Dry Cleaning of sofa sets using shampooing machine with all materials & drying it do the level using machinery at designated place by engineer-in-charge one seat of sofa (payment for multi seater sofa will be done as the number of seats of that sofa.) Single Seater Sofa Two Seater Sofa Three Seater Sofa Providing and fixing Superior quality CP Brass fittings of approved make as per direction of Engineer-in-charge (i)Health focet (Premium heavy Quality) as approved by Engineer-in-Charge Providing & applying Lime Kara 1:2 (1lime cream: 2 Zikki powder) grinding mortar with grinding mill/manualy on lime base, on flat surface in two coats. First coat applying 3mm to 4mm. thick and curring properly at least 7 days, second finishing coat done after 7 days of previous coat as per traditional practice. (thickness not more then 6 mm) (C-4/46) Providing and fixing fine dressed sand stone/approved stone JALIas per existing matching geometrical design including moulding work with fine finishing, fixing with thambli by proper adhesive and white cement with pigment including making groove etc. complete in all respect. (C-5/5 16.2 b) Providing and Fixing fine dressed sand stone /approved stone Thambli (katahara pillers including) kalash on top, fixing on dasa as per existing design for fixing of stone jalies/railings including making grooves as per required size. Size 100x100x750mm including kalash with moulding. (C) 5/5.9.26) Khameera Colour Washing as per traditional practice to prepare the Khameera the lime should be slaked at least for 7-10 days and regularly it should be stirred by adding curd Gugal, for non-synthetic colour adding gum (babool gum) as per specification. Then applying prepared solution on walls three to four thin coats as desired finishing. (C-4/43) Deduct for khameera work if kangoora / design /lining work not done(C-4/4.4) Filling of Stone Pitching open joint in Pathways with cement concrete 1:2:4 including cleaning of joints properly and curing of joints upto 7 days complete as directed by Engineer In Charge. Removing & refixing of 75mm thick sand stone in lime surkhi mortar 1:2 and pointing of flooring with lime surkhi mortar 1:2 including pigment to matching the shade. Removal of Bee hives from various places such as Chhajas in Amber Palace approx ht. 100 to 150. The Rates are including providing necessary scaffolding (Like Jhula, Ladder etc.) with all lead. lift and safety arrangements. After the removing of Bee hives the surface to be cleaned neatly &necessary chemical coating be applied on surface as per direction of Engineer In Charge. SITC of brass nozzle with Gl Pipe for mughal style fountain as per sample approved by Engineer in Charge. Providing & Fixing of Stone body under brass nozzle made out of karauli red stone as approved by Engineer in Charge Providing & Fixing Brass fittings on existing wooden doors of approved make including removal of old fittings complete as per direction of egineer in Charge. Aldrop of Size 250 mm SITC of Marble Fountain in SeeshMahal including all fittings as per sample approved by Engineer In Replacing of old damaged wooden strips by new strips including enamel paint, labour & Hardware complete in all respect as per direction of Engineer in Supply of two seater sofa set made out of M.P.wood grade 1st and 19 mm block board ISI mark with 4mm teak ply over 19mm board(Green ply Icentury make). The seat shall be thick P.U. foam and back shall be 32 density 3 thick P.U. foam. The tapestry cloth shall not be less than Rs.500/- per mtr. including all hardare,melamine polishing, beading etc. comoplete as per approved design, drawing and direction of Engineer In Charge Size 48X30X32 Supply of Diwan of Size 72 ^ prime prime *48^ prime prime made out of M.P.teak wood and 19mm board ISI marked with 4mm thick teak ply over 19mm board (Green ply /century make on all visible sides including mattress of Size 72 ^ prime prime *48^ prime prime made out of foam 150 mm thick The Diwan should be of box type including all hardware, melamine polish,etc. complete as approved design, drawing and direction of Engineer in charge Supply of Premium Lite Dual Comfort Mattress of 72 ^ prime prime *48^ prime prime Neelkamal, kuri on or equivalent) made out of foam 150mm thick complete as per direction of Engineer in charoe (A) Cleaning and removing of the existing surface and other loose material over the roof. (B) Application of single coat of R.B. Cares Unisel or equivalent mixed with water in the ration of 1:1 via brush over the surface as a bounding coat and allow the same to air cure for atleast 2 hrs. (C) Application of R.B. Cares two component Uniseal mortar or equivalent two coats (minimum thickness of 90-100 microns each) (dry powder 80% chemical 20% acrylic resin having 52% solid contents) with proper mix proportion of part 1 and 2 via trowel. Allow the coating to air cure for minimum 3 hrs. (D Application of Fibre glass mesh (made up of unylon and plastic with weaving size of 10X10 yarn/inch duly coated with alkanline resistant polymer) along with R.B. Cares Elastomeric Water Proofing Membrance Paste mixed with water in the ration of 5 kg is to 1 litre over the mesh to provide a minimum thickness of 100 merons. (E) Application of R.B. Cares two component Uniseal mortar of equivalent two coats (minimum thickness of 90-100 microns each) (dry powder 80% chemical 20% aerylic resin having 52% solid dontents) with proper mix proportion of Part 1 and 2 via trowel. Allow the coating to air cure for minimum 3 hrs. Providing & fixing of wall mounted water closet ivory coloured vitreour china (hindware, Cera), crystal size 600x360x400 mm including fixing of chair complete including making good the wall & as per direction of Engineer Incharge. Providing and Fixing wall mounted liquid soap dispenser of superior quality and approved make capacity 500 ml. (approx) complete as per approved by engineer incharge. Oiling with linseed oil (two or more coats) on wooden doors & windows and wooden railing at variuas place in Amber Palace including filling of craks & preparation of base with putty etc. painting two coats of antitermite paint by using chemical emulsion as per IS 10013 (Part III)-1989 and Painting two coats with oil type wood preservative of approved brand complete in all respects as per direction of Engineer In Charge including all leads and lifts.

INR 500 /-

INR 18820.0 /-

INR 9.41 Lakhs /-