Tender For Development And Maintenance Of Scheme Area Parks In Division I-D, Kda Kota - 1 Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter.All kinds of soils 2 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stoneaggregate 20mm nominal size). 3 Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in:Cement Mortar 1:6 (1 cement : 6 sand) 4 6.2 Random Rubble stone masonry with hard stone in superstructure above plinth level and upto five level above 30cm. thick walls in :Cement Mortar 1:6 ( 1-Cement : 6-Sand). 5 Providing and laying damp-proof course with cement concrete grade M-150 (1 : 2 : 4) mortar prepared with 1% solution of water-proof compound complete as per specification .50mm thick 6 Plaster on new surface on walls in cement sand mortar 1:6including racking of joint etc. complete fine finish :20mm thick. 7 Finishing wall with water proofing cement paint of approvedbrand and manufacture and or required shade to give an evenshade including all scaffolding:New work (Two or more coats applied @ 3.84 kg/10 sqm). 8 Painting with synthetic enamel paint of approved brand and manufacture togive an even shade : Two or more coats on new work 9 Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide 10 Extra if square,rectangular hollow tubelarsections are used or grill made by flats only 11 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level.M20 grade Nominal Mix1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stoneaggregate 20mm nominal size). 12 Providing and laying ofpaver block as per IS 15658 : 2006 (Indian standard for precast concrete block for paving- specification) and IRC : SP:63-2004 (guidelines for the use of interlocking concrete block pavement) M-30, 60 mm thick to be used in non traffic areas like building premises, monument premises, land scapes, public gardens/ park, domestic drives, paths and patios, Embankment slopes, sand stabilization Area etc.( As per table 1 of IS 15658:2006 Category „B‟ Denated only two side like I,Z,T shape etc. as 13 Construction of embankment with approved Material obtained from borrow-pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting by vibratory roller 8-10 tonne to meet requirement of Table 300-2 including cost of compensation for earth taken from private land with lead upto 1 km as per MoRTH Specification : Clause No. 305. 14 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. 15 Painting exterior surface ofWallwith 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer, putty,etc complete in all respect including scaffolding and safety provision 16 Double Swing : Double Swing is suitable for 4 to 14 years Children and frame is made of NB pipes which should be following specifications :Area : 3.0 mtr x 2.50mtr.Safe play area : 4.0 mtr x 3.50 mtr.Height : 2.40 mtr. (on ground level)Leg support : 40mm NB pipes Top bar : 50mm NB pipe Seat : 9mm thick reinforced rubber (Non skid chequired top, bearing : Housing special casting heavy duty bail bearing, suspension : 7mm dia Electro Galvanized chain 17 Single See Saw : The Single See Saw suitable for 4 to 8 years children and made of MS pipes which should be following specification : Area Required : 1.50 mtr.x 3.0 mtr.Height : 0.90 mtr. Main Pipe : 50 NB pipePlank : 40 NB pipeHandle : 20 NB pipe Seats : MsS sheet (5mm thick) FRP 18 Wave Slide : The sliding chute of wave slide is made of 6mm thick fibre glass reinforced plastic. (Binani or equivalent make) with a smooth surface consist of 3 sliding mould of 2.00 ft. (approx). The platform made out of 10 gauge MS sheet and shall be supported on 33mm OD 14 gauge. The ladder shall be 60cm wide (approx) and will be made of 25mm NP pipe with 15mm dual steps. The slide shall be supported on three parallel supports of different length. the size of the slide above the ground level shall be as follows platform height 2.40, slide length 4.20m and slide width 0.50 mtr. (approx) 19 Providing and supplying of Garden bench (Victorian) at site both side of garden bench is made of cast iron having back height of 720 mm and seating height of 390 mm (approx.) it may vary at some places and both side of Garden bench is connected with 10 Nos. MS tube of rectangular section size 65×25×3mm having length of 1520 mm for seating purpose with extra support 25×5 mm MS flat for extra stability. All sharp and rough edges of bench is to be grinded with grinder and all fill up with m-seal, and fixed at required position and this bench is having the provision of hold & fast system weight not less than 95Kg(for grouting) bench is complete with a coat of 1st class red oxide and with three coats of synthetic enamel of 1st class quality paint in green colour finally bench is assembled with nuts and fixing at the site complete with the direction of E-I-C. 20 Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in : Cement mortar 1 : 6 (1 cement : 6 coarse sand) 21 Supply of dry manure including loading unloading,transportation & stacking at site. Goat dungmanure 22 Supply of Chemical Fertilizers at store in bags weighing not less than 50 kg each including loading unloading & transportation 23 Supply & Stacking good soil of earth at site complete including loading unloading & Transportation etc. 24 Spreading of manure , good earth in required thickness (cost of manure and good earth to be separately ) 25 Supply of different varities of tree/shrubs/climbers according to height and age of the plant at side including loading/unloading & transportation etc.complete 26 Different flowering plants 900mm to1500mm 27 Different varieties of shrubs 600mm to 900 mm 28 Different varieties of climbers 900mm to 1500 mm 29 laosnd }kjk fuEu çtkfr;ksa ds kcZl dh vkiwfrZ ,oa yxkukAikS/kk LoLFk gksuk pkfg,A ikS/kksa dh Å¡pkbZ 0-40 ls 0-50 eh- rd A 30 Crape Myrtal /Hemelia /Lantana Selloviana /Lantana Yellow /Rukmani /Gaudichaudi 31 Jade Plant /Aclypha Tricolor /Kaner Dwarf /Copper Plant /Gudhal /Chandni/ Kamini Muraya /Callindra Pink Off. 32 Maintenance of Hedge, Climbers, Shrubs at parks including watering, trimming, preparation of thawala, manure and complete work. 33 Supply of different varieties of bougainvillea in ply bags/earthen pot according to height growth and age of plant at site including loading unloading and transportation etc. complete 34 Different varieties of bougainvillea 600mm to 900mm 35 Supply of different varieties of rose plants in poly bag/ earthen pot according to height growth and age of the plant at site including loading unloading and transportation etc. complete 36 Different varieties of grafted rose plants in poly pot/earthen pot 37 Supply of different varieties of palms in poly bags/earthen pot according to height growth and age of plant at site including loading unloading and transportation etc. complete 38 Bottle palm 5 to 8 feet 39 Fox talepalm 5 to 8 feet 40 T cycuss3 feet 5 feet 41 Supply of different varieties of indoor plantsin poly bags/earthen pot according to height growth and age of plant at site including loading unloading and transportation etc. complete 42 Deshi crotons 43 Selective varieties of crotons 2 to 3 feet 44 Rubber plants etc 45 Differentfycus plants tolairy 100mm to 125 cm height 46 Different champa 125 cm to 215 cm height 47 Digging pits in ordinary soil and refilling the same with the excavated earth mixed with manure in the ratio of 2:1 by volume ( 2parts of stacked volume of earth after reduction by 20% 1 part of stacked volume of manure after reduction by 8%) flooding wit 48 yxs gq;s ikS/kksa dk la/kkj.k dk;Z &laosnd }kjk yxs gq;s ikS/kksa dh lkj laHkky@la/kkj.k dk;Z djuk gksxk] ikS/kksa dh vPNh o`f) gsrq laosnd }kjk le;≤ ij vko’;drkuqlkj vçoqM [kkn] fu;fer ikuh nsuk o dhVuk’kd dk ç;ksx ,oa fujkbZ&xqM+kbZ] Fkkaoys cukuk o ikS/kksa dks lh/kk j[kus ds fy, ckal dh [kIiph yxkuk vkfn dk;Z la/kkj.k esa kkfey gSA ftldk çcU/k laosnd }kjk vius Lrj ij djuk gksxkA yxkus ds 12 ekg rd A 49 nwc dk la/kkj.k dk;Z &yxh gqbZ nwc dk la/kkj.k dk;Z esa [kjirokj fudkyuk] fu;fer flapkbZ djuk] [kkn Mkyuk ,oa e’khu ds }kjk fu;fer dVkbZ djuk rkfd nwc vPNh rjg ls fodflr gks ldsA 50 Supply of PVC hose pipe of different sizes at store including transportation etc. complete. 51 38 mm dia 52 P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make : (-do-) 25mm nominal bore. 53 Providing and fixing 3-layer PP-R (Polypropylene random coplymer ) pipes SDR 7.4 UV stabilized and antimicrobial fusion welded, having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylene random fittings including trenching, refilling and testing of joint complete as per direction of Engineer - in charge. (EXTERNAL WORKS) PN-16Pipe, 25 mm OD 54 P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /makeincluding joining the pipe with solvent cement rubber ring and lubricant.110 mm dia 55 Construction of Tube-well upto 100 Meter depth and above in all type of rocks by DTH system and over burden, to accommodate casing pipe of following sizes in all types of soils and over burden including lowering of casing pipes, but excluding cost of casingpipes as per IS : 2800 (Part I & II) 1979 specifications. The work would be completed after obtaining sand free water. The tube well should have a throughout bore as per nominal dia of casing pipe: 200 mm –do- 56 Supply of ERW M.S. black casing pipe ISI marked (IS:4270/1992) of grade Fe410 of following sizes at site of work. 200 mm Nominal bore of pipe 57 S & F tube well cover ofM.S.sheet (6mm thick) with nuts and bolts complete for casing size: 200mm dia 58 SITC of Radial / mixed flow ISI marked water and anti-corrosive liquid filled submersible motor pump setssuitable for 100/150mm dia borewell.The size of adopter fixed on top of the motor should exceed the top of coupler , for safegaurd the coupler. The construction material of motor and pump should match IS: 8034 : 2018 and IS: 9283 guideline. The radial flow pumpset should operate at 5 star energy efficiency level of BEE and mixed flow pump set should operate at 3 star energy level of BEE, accompained by valid BEE certificate. Motor should be IE2 class as per IEC 60034-2-1: 2007, IEC 60034-30: 2008,& IS12615:2011with required accessories including making connection suitable for Bore well. The job includes labour part of lowering ofriser pipe G.I./H.D.P.E. with rope, cables & pump, installation of complete fitting and accessories, jointing of electrical cables up to Starter. All labour for testing of submersible pumps set and supply of water to water mains, complete in all respect. OEM shall have submitNABL / CPRI / ERDA accrediatedlab type test certificate before execution. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 59 150 mm diameter Submersible pump shall havefollowing HP Rating, phase, Head range, Discharge range respectively. 3.0 HP, 3-Ø, (54 -95)Mtr, (250-50) LPM 60 P/Laying ISI marked P.V.C. insulated submersible cable confirming to(IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from99.90 % purity copper, stranding in acc. to IS:8130/IEC 60228 forlower watt loss , oxygen freefor less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5,existing pipe / open trench / Cable tray / on surface including making connection etc. as required. For additional technical parameters of product / work refer Annexure A attached with this BSR 61 4.0 Sq.mm 3 core flat / Round 62 Providing & Fixing of HDPE pipe Confirming to IS:4984:2021for water supply suitable for submersible & jet pump with required fittings ie socket, elbows, tee etc. complete in all respect. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . for Horizontal installation 63 40 mm OD4kg/ cm2
