|
| 1 | Excavating in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth and not exc 10 Sqm on planin any type of soil and getting out complete all as specified and directed. |
| 2 | Returning, filling in (soil) including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil complete all as specified and directed. |
| 3 | Removal of excavated material (soil) to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed. |
| 4 | M&L for plain Cement concrete 1:3:6 C-2 using 40 mm graded crushed stone aggregates in foundation filling and mass concrete complete all as specified and directed. |
| 5 | M&L for Brick work with old size bricks having crushing strength not less than 75 Kg/Sqm, straight or curved on plan exceeding 6 m mean radius with old size bricks built in cement mortar 1 : 4 complete all as specified and directed. |
| 6 | M&L for PCC 1:2:4 B-1 as in coping etc including necessary form work complete all as specified and directed. |
| 7 | M&L for Rendering 15mm thick on fair faces brick surfaces in cement mortar 1 : 4 finished even and smooth without using extra cement complete all as specified and directed. |
| 8 | M&L for Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work foretc con- forming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 9 | M&L for Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work for including portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc con- forming to Fe.310.Gde-E-410 complete all as specified and directed. |
| 10 | M&L for Applying two coats of cement based paint over concrete or newly plastered suraces incl preparing new plastered surfaces complete all as specified and directed. |
| 11 | M&L for painting with synthetic enamel paint two coats over a coat of red oxide primer including preparing the new untreated steel surfaces of any description over 10cm in width or girth complete all as specified and directed. |
| 12 | M&L for PCC 1:4:8 Type D-2 (40 mm graded aggragate) as in fdn, filling and mass concrete complete all as specified and directed. |
| 13 | M&L for Form work to sides of concrete foundations, footings, bases of columns, sides & soffits of foundation and plinth beams and similar work for rough finished flat surfaces of concrete complete all as specified and directed. |
| 14 | M&L for Form work to sides of square or rectangular columns, pillars, posts and struts for rough finished surfaces of concrete complete all as specified and directed. |
| 15 | M&L forRCC M-25as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 16 | M&L for RCC M-25 as in Columns, pillars, piers, posts and struts complete all as specified and directed. |
| 17 | S&F MS TMT bars 10mm dia & over cut to length bent to shape reqd incl cranking, bending spirally for hooping for cols, hooking ends and binding with steel MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 18 | Description all as per item No 18.00 above but for 5mm dia and over upto and incl 10mm dia in stirrups, spacers and binders complete all as specified and directed. |
| 19 | M&L for rendering 35 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and fair without using extra cement complete all as specified and directed. |
| 20 | Schedule of Credit |
