tender for Various Repair Works In Residential Building Number C-1 To C-6 Of Scrb Quota In Rpa Campus Jaipur, construction of road & other development works, Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge. 1:3: 6 or richer mix. Taking out doors, windows and clearstory windows shutters (steel or wood) including stacking within 50 meters lead: Of area 3 square meter and below. Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar. Labour charges for removing C.I./A.C. pipes of all sizes including accessories with care and stacking of useful material. Dismantling tile work in floors and roofs laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meter lead:For thickness of tiles 10mm to 25mm. Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. Dismantling Gl pipes (external work) including excavation and refilling trenches after taking out the pipes and including stacking of pipes within 50 meter lead: 15mm to 40mm nominal bore. Repair to stone masonary in cement sand mortar 1:6 with old and new stone. Repair of door, window shutters including cost of material and labour for change of damaged: Aldrop of mild Steel 12 long x12mm dia Stopper of Aluminium with Double Rubber Gutka Making holes in stone masonry wall upto 450 mm x 450 mm size and making good in CM 1:6. Grading roof for water proofing treatment with water proffing compound Cement concrete 1:2:4 (1) cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) Providing gola 75x75 mm in cement concrete 1:2:4 (1) cement: 2 coarse sand: 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design: Providing & laying broken glazed titles on roof ( broken glazed tiles not less than 9 Kg/Sqm) on top of hot bitumen @ 1.7 Kg/Sqm. (1.40 Kg of VG-40 (30/40)grade and 0.30 Kg/Sqm. Of VG 10 (80/100) grade) and joints filled with cement mortar 1:2 (1 cement: 2 marble dust mixed with waterproofing.compund all complete as.ner Making khurras 450 x 450mm with average minimum thickness 50mm cement concrete 1:2:4 over P.V.C. Sheet 1 Mtr. x 1 Mtr. x 40micron finished with 12mm cement plaster 1:3 and one coat of neat cement, rounding edges and making and finishing the out let complete. Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry. making of lines or groove etc complete but excluding the cost of nosing of steps etc. complete.40mm thick with 20mm thick nominal Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10 cm of 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section (IS 1038-1983) joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required:Partly fixed and partly openable [ fixed area not to exceed 33%1 Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance. Providing and fixing Square bars or other flat welded to window, ventilatiors etc. Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure A :30 mm thick.Commercial Veneer both Extra for providing external lipping with 2nd class teak wood battens 6 mm minimum depth on all edges of shutters (over all area of door shutter to be measured) Over item no. 8.13. Providing and fixing Marble stone flooring table rubbed, 15-18 mm thick over 20mm (Av.) thick base of CM 1:4 (1 cement: 4 coarse sand) jointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete.Keseriaji Abu Ambaji (Green Marble) Above 3601 Cm2 Slabs Extra for providing edge moulding to 15-18mm thick marble? GranitelKota stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc, complete as per design approved by Engineer-in-Charge. Marble work Half Edge Extra for providing opening of required size & shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/Granite/stone work including necessary holes for pillar taps etc. including rubbing and polishing of cut edges etc. complete Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS: 13753 & IS:15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS: 13755 and IS 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4).. Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in Cement mortar 1:6 (1 cement: 6 coarse sand) Providing & fixing precast cement concrete coping 1: 2:4 mix 50mm thick complete as per specification: Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying: a) first layer of slurry of cement @ 0.488 kg/sqm mixed with water proffing cement compound @0.253 kg//sqm This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proffing cement compound @ 0.126 kg/sqm This layer will be allowed to air cure for 4 hours followed by water curing for 48 hours. The rates includes preparation of surface treatment & sealing of all joints, corners, junction with polymer mixed slurry. P & F Indian type white glazed vitreous china 1st quality W.C. orissa pan (IS:2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor: Size 580x440mm. Labour charges for removing W.C. pan (any type) of all sizes with care including all necessary fittings P or S trap. P & F WWC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make, P.V.C Waste pipe with PVC nut 32 mm complete including cutting & making good the wall Size 550 mm x 400 mm P & F Kitchen & Lab. Sink of approved make with C.I. brackets duly painted, 40 mm C.P. waste coupling, C.P. Brass chain with rubber plug, 40 mm G.I. waste pipe up-to floor level complete including cutting and making good the wall & floor 1.0 mm thick stainless steel AISI 304 & IS 13983-1994 kitchen sink of approved make as per Engineer-in-charge with large waste coupling. Overall size (inches) 22 x 18 x 7 Bowl size (inches) 20x16x7 Filling of sunk portion of roof with earthen pots of required height including filling voids with 1:3:6 light concrete, using brick bats complete levelling and dressing the surface by 50mm thick cement concrete 1:2:4 as per specification. Providing & fixing C.P.flange for 15mm dia taps. Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings ic fixing the pipe with clamps at 1 metre spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (Internal work 25 mm nominal size 32mm nominal size P & F Bib Cock (IS: 8931 Mark), Superior quality of approved make: C.P. Brass bib cock, 15mm nominal bore. C.P. Brass Long body, 15mm nominal bore weight not less than 690 gm P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. C.P. Inlet connection 15mm.Brass (IS: 8931 marked)with 37 cm long pipe and nut. P & F Flush Cock/Flush Valve (IS: 9758 Mark) for WC of approved quality make:CP brass push type concealed 25mm nominal bore. P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make: Gun-metal 15mm nominal bore. Gun-metal 25 mm nominal bore. P & F PVC Storage Tank ISI Marked (IS: 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 500 litres capacity. Hoisting Charges for each floor For 200 litre to 750 litre capacity Supply & fixing G.I. Union ISI marked in G.I. pipe line as required complete in all respect of size: 15mm dia nominal bore 25mm dia nominal bore Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,) 20mm nominal outer dia pipes 25 mm nominal outer dia pipes Providing Laying & jointing glazed S.W. pipes grade A (IS:651 marked) of approved make with spun yarn & stiff mixture of cement mortar 1:1, excavation & refilling of earth in all types of soil upto 1.2m depth, S.W. fittings, including testing of joints etc, complete. 150mm dia Providing & Laying C.C. 1:5:10 (Stone aggregate 40mm nominal size) all around S.W. pipe including 15 Cm. thick bed concrete (Width W= Diameter of pipe in Cm+30 Cm.)(Excluding cost of pipe) 150mm dia S.W. pipe Labour charges for Removing S.W. pipes including breaking of joints & bed concrete, stacking of useful material at site within 50 mtr. Lead and disposal of unserviceable material within 0.5 Km. lead:100 & 150mm dia pipe P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm².) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. 110 mm dia P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: Coupler (socket)110mm dia Bend 87.5 110mm dia Pipe Clip 110mm dia Door Tee 110mm dia Raising manhole cover and frames slab to required level including dismantling existing slab and making good the damage as required (raising depth of manhole masonry to be paid separately). Rectangular manhole 90x60 cm Construction of manhole in all type of soil inner size 90 X 60 Cm. 300 mm thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5:10 in foundation, 20 mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring, making channels, 80mm thick stone slab covering with 40mm thick M-15 grade C.C. flooring, Cement cover with frame of 450mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead. Depth up to 0.5 M Add extra over item 3.19.1 for every additional 0.10m depth above 0.5 m depth. Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 m,10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring, earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr. Inside size 300 X 300 mm depth upto 0.5 M Cement cover with frame. Inside size size 450 x 450mm depth upto 0.5 M Cement cover with frame Construction of Cement Concrete Chamber 125mm dia.C.P. Brass grating Construction of Cement Concrete Chamber 125mm dia on depressed floor upto 45cm height from floor with C.P. Brass grating Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for sciland waste discharge system (IS:13592: 1992 Marked) of approved quality/make 75 mm dia 110 mm dia Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592: 1992 Marked) of approved quality/make Coupler 75mm dia 110mm dia Bend 87.5 Dg. 75mm dia 110mm dia Pipe Clip 75mm dia 110mm dia Nahni Trap without Jali 4 110mm dia Vent Cowel 75 mm Vent Cowel 110mm dia Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish: 20mm thick. Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete New Plastered Surface (three or more coats) Distempering with oil bound wegbable distemper of approved brand and manufacture to give an even shade including all scaffolding: New work (two or more coats) over and including scrapping and priming coat with cement primer. Applying priming coat: With ready mix Aluminium primer of approved brand and manufacture on resinous wood and plywood, Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work Stone slab roofing on ground floor with fine grained stone slab from approved quarry including filling of joints of parapet and slab on both sides in cement sand mortar 1:4, with ceiling pointing in cement sand mortar 1:3 complete as per specification and instruction of Engineer In Charge P & F Square-mouth gully trap A grade (IS 651-1992) :marked) of approved make complete with C.I. grating, frame & Cover masonary chamber in C.M. 1:6, 100mm thick C.C. 1:5:10 base concrete, 40mm thick C.C.M-15 grade coping, 12mm thick cement plaster in CM 1:3 complete as per approved design & type. Trap size 150 X 100mm, ferrow cement cover with frame, Internal Chamber size 300 X 300mm. Wiring of light point fan point/ exhaust fan point/call bell point with1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copperconductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulatedunsheathed flexible copper earth conductor 1.1 kV grade (IS:694) inrecessed ISI marked MMS ( IS:9537 PIII) virgin material PVC conduit &its ISI marked (IS:3419-1988) accessories, round tiles, 1.2 mm thick HotDipped Galvanized Modular Box with earth terminal, 10A Modularswitch, Modular face plate with grid plate, 3 pin ceiling rose/Holder/3way connector, screws, making connections, testing etc. as required. For specification of copper Conductor, Phenolic Laminated sheets & Electrical Wiring accessories refer Chapter E04, E05 & E-07 Foradditional technical parameters of product/work Short point (up to 3 mtr.) Medium point (up to 6 mtr.) Description Wiring of 3/5 pin 6 amp. Light plug point with 1.5 sq. mm nominal sizeFR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) in recessed ISI marked MMS (IS:9537 P III) PVC conduit & its ISI marked (IS:3419-1988)accessories, Hot Dipped Galvanized Modular box of 1.2 mm thick with earth terminal, 10 A modular switch, 3/5 pin 6 A modular socket, Modular face plate with grid plate, screws, making connections, testing etc. as required. For specification of copper Conductor, Phenolic Laminated sheets & Electrical Wiring accessories refer Chapter E-04, E-05 & E-07 For additional technical parameters of product/work refer Annexure A attached with this BSR On board Medium point (up to 6 mtr.) Supplying and fixing of power plug point with Modular accessories as perPWD specification for electrical Works, on hot dipped galvanized modularbox of 1.2 mm thick with earthing terminal/connector on surface or inrecessed with suitable size of modular face place with grid plate and coverplate including cost of ISI marked modular 16 amp. Switch (IS :3854) and6/16 amp. socket outlet (IS:1293) making connection, testing, etc. asrequired. For specification of Wiring accessories refer Chapter E 07related item & For additional technical parameters of product work refer Annexure A attached with this BSR Providing & Fixing of BEE Star rated copper wounded double ball bearing capacitor start, aluminium body & Metallic blade ceiling fan Conforming to all the performance requirements laid down in IS 374:2019 including all amendments, as applicable; & Carry BIS licensing (i.e. ISI marking) with down rod up to 80 cm with secondary support safety cable (steel rope), cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/work. refer Annexure A attached with 1200 mm Sweep BEE 3 Star rated (service value >=5.0 to 5.5 Providing & Fixing of IS 11037:1984 marked non modular socket size flush type 180 watt rotary minimum 5 step fan regulator with CM/L no. printed and made out from industrial grade Polycarbonate or fire resistant ABS material including making connection testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/work, refer Providing & Fixing of IP20 SMD Mid Power LED batten type integrated light fixture made from Powder coated Extruded aluminium housing with in built driver, System lumen efficacy≥ 110 lm/Watt output, internal surge protection of 2.5 KV with Short & Open circuit protection THD < 10%, P. F.≥0.95, CRI >80, life time of minimum 50000 Burning Hours with, 70% of intial Lumen maintaned till life ends, CCT 3000°K/4000°K /5700°K/6000°K/6500°K (As per ANSI Bin), Maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate (T.C.). Manufactures Word Mark Name Engraved/Embossing Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate /Report from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work Annexure A attached with this BSR refer 1170mm(+/-10%) LED batten with min. lumen output 2200 1m Providing & Fixing of Recessed/surface mounting heavy duty horizontal type Double Door (Metal/Glazed)Distribution board with Metal end box made out from Galvanized steel/CRCA sheetnot less then 1.2 mm thick conforming to IS-8623-1 & 3 / IEC61439-1 & 3, powder painted complete with reversible door (fordouble door DB only )100 amp. insulated copper bus bar/shortinglink copper neutral link, copper earth link, color codedinterconnecting wire set of suitable rating and dinbar maskingsheet, making internal DB terminations with copper lugs, Ferrules, detachable gland plate, including making connections, testing etc.as required. OEM shall have submit NABL/CPRI/ERDA accrediatedlab type test reports & All as per pre approved by Engineer incharge. For additional technical parameters of product/work t/work refer Annexure A attached with this 8 Way (8+2) Providing & Fixing of 240/415 V AC MCB with positive isolation of 10 kA breaking capacity (B/C/D tripping characteristic as per type ofload and site requirement) 4 KV impulse withstand voltage, ISImarked IS 8828(1996)/conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanisum, energy limiting of class 3 as per IEC, minimum phase termination capacity of 35sq.mm. conductor line load reversibility IP 20 contact protection and fittedin existing distribution board/sheets, minimum electrical operation20,000 upto 20 A rating and 10,000 upto 63 A, 5000 for 80 A &above rating including making connections, testing etc. as required. OEM shall have submit NABL/CPRI ERDA accrediated lab typetest reports & All as per pre approved by Engineer in charge. Foradditional technical parameters of product Annexure A attached with this BSR work refer Double pole MCB(With B/C curve tripping Characteristics) 6 A to 32 A rating Single pole MCB (With B/C curve tripping Characteristics) 6 A to 32 A rating Supplying and drawing FR PVC insulated & unsheathed flexible copperconductor as per PWD specification for electrical Works with ISImarked (IS:694) and as per IS 8130 2013 of 1.1 kV grade. Wire shouldbe made from 99.90% purity copper, class 5 stranding in acc. toIS:8130/IEC 60228 for lower watt loss, oxygen free for less chances of oxidization, insulation PVC type A/C/D, flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5, in existing surface or recessed PVC/ MS conduit/casing capping makingconnections with Copper Lugs of suitable size, Ferrules,testing etc. asrequired. OEM Must have its own in house NABL lab setup for alltesting facilities for wires. For additional technical parameters ofproduct/work refer Annexure A attached with this BSR 2 x 6.0 sq. mm. + 1 x 2.5 sq. mm. 2 x 2.5 sq. mm. + 1x1.5sqmm S&F following sizes (dia.) of ISI marked virgin material MMS (IS:9537 P-III) PVC conduit along with ISI marked (IS:3419-1988) accessories asrequired in recess including cutting the wall, covering conduit andmaking good the same as required. For additional technical parameters of product/work refer Annexure A attached with this BSR 20 mm 25 mm Plate Earthing as per IS:3043 with Hot dipped G.I. Earth plate of size600mm x 600mm x 6.0mm by embodying 3 to 4 mtr. below the groundlevel with 20 mm dia. G.I. B class watering Pipe including all accessorieslike nut, bolts, reducer, nipple, wire meshed funnel, and Heavy dutyweather proof poly-propylene earth pit chamber with lockable Jam freelid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to260 mm, Bottom Dia 300 to 350 mm. and Height 250 to 300 mm. andembodying the pipe complete with alternate layers salt and coke/charcoal, testing of earth resistance for value of 5 ohms or less asrequired & must record by engineer in charge during site visit and ensureto enter in measurment book.All as per pre approved by Engineer incharge. For additional technical parameters of products/work refer Annexure A attached with this BSR Supply & Laying following size earth wire in horizontal or vertical run inground/surface/recess including riveting, soldering, saddles, makingconnection with GI/Cu purity purity >95% thimble etc. as required. All asper pre approved by Engineer in charge. For additional technicalparameters of products/ work refer Annexure A attached with this BSR. 8 SWG G.I. (Hot Dipped) Wire Providing & Laying P.V.C./XLPE insulated & P.V.C. sheathed Un-Arrmoured Aluminium cable confirming to IS:1554 P-I/IS:7098 PI of 1.1 KV with H4-Grade electrolytic aluminium conductor confirming to IS 8130 of purity >99.6%, Inner / outer sheath confirming to IS:5831 in existing RCC/Hume / Stoneware /PVC pipe/open duct/cable trench/Cable tray (with cable tie) including testingetc. as required of following size. OEM must have its own in house NABL accrediated Laboratory for testing procedure as per IS:10810. For additionaltechnical parameters of product/work refer Annexure A attached with this BSR 25.0 Sq. mm 3.5 core Providing & Fixing of energy efficient /energy saving IP 20 LED direct retrofit Bulb inexisting holder or fixture as required with system lumen efficacy ≥100 Im/Watt output,pf0.95, CRI>70, minimum life time of minimum 25000 Burning Hours with 70% of intialLumen maintaned till life ends, CCT 3000°K/4000°K/5700°K/6000°K/6500°K (As perANSI Bin), maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate (T.C.). Manufactures WordMark Name Engraved Embossing/ Screen printing on housing. OEM must have its own inhouse NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) certificate Report from OEM shall be submitted. All as per pre approved by engineer in charge foradditional technical parameters of product/work, refer Annexure A attacheded with this BSR 9 Watt Providing & Fixing of of Double ball bearing, copper wounded capacitorstart single phase metallic blade fresh air fan, in existing openingincluding cost of hardware flexible 3 core copper conductor makingconnections, testing etc. as required. All as per pre approved by Engineerin charge. For additional technical parameters of products/ work refer Annexure A attached with this BSR 225 mm sweep SITC of IP-42 and general construction confirming to IS:8623: 1993, wall/free standing floor mounted dust and vermin proof compartmentalised cubical panel as specifications and Other parameters required as per point (a), (b), (c), (d), (e), (f), (g), (h) as below:-(a) Thickness of CRCA sheet shall be 2.0 mm, cable alley compartments havingconcealed hinged type doors with key type lock with/without detachableextension type structure. Removable 3 mm. thick sheet steel gland plates withappropriate size of knockouts for cables complete panel shall undergo a process of degreasing, Water rinsing. Activation, derusting, pickling in acid bath, phosphatising & shall be subjected tonine tank process and then Powder coated with approved shade of minimum 70microns on both side of panel. The panel having PE foam/Neoprene rubber gasket of not less than 3mm thickness required hardware, concealed hinged door with key type locking arrangement for equipment/switchgear earthed with 2.5 sq.mm braided Interconnection between bus bar and switchgears cable shall be rigidlysupported and made out by flexible copper wires (up to 63 amp) and by solid busbbar (>63 amp) control wiring will be carried out with 1.5 Sq.mm, Earth wire with 2.5 Sq.mm and CT with 2.5 sq.mm flexible copper wire only. All joints/interconnections of copper bus bar shall be dully tinned Clearance between main bus bar and risers/metal parts shall be at least 10 mm additional to width of bus bar Bus bar is insulated by Heat Shrinkable sleeves. Earth and Neutral bus bar shall be half of the size of phase bus bar. (Cost of Bus bar/Flexible wire for Interconnection between Main busbar and Switchgear is to be Paid Extra) Wiring between components within switchgear and Incoming/outgoing cableshall be done through the terminal block only. Direct connection shall not bepermitted. Each terminal block shall be one piece moulded, barrier type, 650 voltgrade, complete with washers, heads, studs with two nuts and identification stripsand shall have adequate continuous current rating. For tap-offs, adjacentterminals with shorting strips shall be used. 10% Spare terminal blocks shall beprovided. Wire identification on marking strip shall correspond to the designationof the wiring diagrams. All wire terminals on the equipment shall also be markedwith All wiring shall be enclosed in plastic channels and neatly bunched and closedin metering chamber. Wiring between terminals of various devices shall be point to point (no wire splitting or tee connections) with wires neatly trucked along the back of the panels, adequately supported to prevent sagging Floor mounted panel shall be mounted on Base frame of ISMC channel size 100x 50 x 5 mm (to be paid Extra Tests: The insulation resistance (with 1000 V Megger) and High voltage Power frequency test (by applying a voltage of 2.5KV for one minute) shall be measured between phases, between phase and neutral and between phase and earth. bothbefore and after high voltage power frequency test. The insulation resistance shallnot be less than three megaohm. CT Secondary current injection test shall also becarried only outer surface area on all sides shall be measured & panel to be fabricated only from CPRI approved fabricator only (CPRI Test certificates to be submitted Allas per pre approved by Engineer in charge. For additional technicalparameters ofproducts/ work refer Annexure A attached with this BSR Supplying and fixing of Aluminium (IEC 60105 ISO 209-1,2) Copper (IEC 60028) bus bar by means of SMC DMC type insulator with standard short circuitwithstand capacity, high tensile nuts and bolts spring washers in existing panelincluding bending, cutting in required shape and size and colour coding with heatshrinkable PVC sleeves. All as per pre approved by Engineer in charge. Foradditional technical parameters of products/work.refer Electrolytic grade Aluminium bus bar 6010 grade Providing & Fixing of 110/220 V, unibody LED Indicating lamp IEC 60947withintegral circuit, IP 65 above panel & IP 20 terminal block, Approx. body dia for panel not less then 20 mm, length min. 50mm, front LED cover dia min. 29 mm, contact material phospher bronze for Led, PCB contacts shall be of brass (tinplated), impulse dielectric tested for 2.5 KV, Rated insulation resistance shall be 100 M ohm at 500VDC including connection etc. as required. All as per preapproved by Engineer in charge. For additional technical parameters of products work refer Annexure A attached with this BSR. Red/yellow/Green colour SITC of 3/4 pole current limiting Moulded case circuit breaker (MCCB)made of flame retardent & heat resistant material having followingcurrent rating, short circuit breaking capacity at 440/415 V, 50 Hz; O/L &S/C settings, conforming to IS/IEC 60947 P-2 2003 with front face andcentralised adjustable, trip free mechanisum, true contact positionindicator, line load interchangeability, designed for both horizontal &vertical mounting without any adverse effect on electrical performance, suitable for operation upto 55 degree and without derating upto 40 degree, pollution degree 3, having positive isolation capability, push(test) to trip, trip time less then 10 ms under s/c condition, Breakingcapacity Ics = 100% Icu. U imp=8 KV, rated insulation voltage 690 V.provision for UVR, shunt trip, earth fault trip, door interlock, pad lock &rotary handle, including making connections etc. as required.OEM shall have submit NABL / CPRI/ERDA accrediated lab type test certificatebefore execution approved All as per pre 4 pole MCCB With Thermal Magnetic release up to 100 Amp, 25 kA, adjustable O/L & adjustable S/C setting, Supply & Laying following size B class, G.I. Pipe confirming to IS: 1239P-1 (2004) with accessories like bend, socket etc. for laying earthconductor/stripcable in ground surface/recess as required. All as per pre approved by Engineer in charge. (Earth Excavation will be PaidExtra) All as per pre approved by Engineer in charge. For additional technical parameters of products/work, refer Annex ure A attachedwith this BSR. 40 mm dia Rewinding of ceiling fan motor (starting and running winding) including all necessarymaterial. The motor is to be wound taking no. of coils, turns and pitch as it was originally wound with required size super enamelled wire with E class insulation material and makingconnections etc. as required. Replacement of material or components shall be use as per guidelines of OEM of original product. All the scrap material should be retained by the contractor. (New model Labour charges for removing and refixing of Ceiling fan/Exaust fan from site Providing & Fixing of Heavy duty capacitor start, copper wound Double ball bearing 900/1400 RPM single phase Exhaust fan conforming to IS:2312 ISI marked in existing opening including making connections testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/work, refer 300 mm sweep(900/1400 RPM) etc
