|
| 1 | Taking down chowkhats or frames area not exc. 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 2 | Taking down chowkhats or frames area exc. 1.50 Sqm but not exc. 4.00 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 3 | Taking down shutter of any description n exc 1 sqm each complete all as specified and directed. |
| 4 | Taking down shutter of exc 1 and n.exc 2 Sqm each complete all as specified and directed. |
| 5 | Taking down shutters and refixing in the same opening exc 1.00 sqm but n.exc 2.00 sqm each of any description complete all as directed. |
| 6 | M&L 2nd class hardwood, Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed. |
| 7 | S&F of 30 mm thick 2nd class hard wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed. |
| 8 | S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commerical type on both sides complete all as specified and directed. |
| 9 | S&F of35 mm thick2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. divided into squares, with out sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. and size of the members of shutter is as specified in clause No. 8.24 (a) of MES schedule 2009, part – I (Specifications) complete all as specified and directed. |
| 10 | S&F in repairs 18/19 mm thick block board grade 2nd quality interior grade decorative veneer on one faces fixed with screwed to timber frame complete all as specified and directed. |
| 11 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes far top and bottom rails, MS frame shall be covered with heatmoulded plain colour PVC “C” channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail;Paneling of plain colour PVC sheets to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cementcomplete all as specified and as directed. |
| 12 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm Prelam colour PVC sheet & edges painted to match with prelam sheet reinforced with M.S. Square tube, & fixing in opening complete asper specification & drawing as specified in SSR Part I, Section 8 and as directed. |
| 13 | S&F Powder coated (minimum thickness of powder coating 50 micron) Anodised aluminium frame for doors, windows, ventilators, partitionswith one or more rebates including joining cleat for fixing etc. complete all as specified and directedNote:- Design/pattern, profile sizes and other dimensions shall be of standard sizes and as directed |
| 14 | S&F Powder coated (minimum thickness of powder coating 50 micron) anodised aluminium doors shutters including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, along with standard locking arrangements, handles, tower bolts etc as required. complete all as specified and directedNote:-(i) Labour charges for fixing of glass/wire guage is inclusive in the unit rate quoted. Glass/Wire Guage shall be measured and paidseperately at supply only rates (ii) Design/pattern, profile sizes and other dimensions shall be of standard sizes and as directed |
| 15 | S&F Powder coated (minimum thickness of powder coating 50 micron) anodised aluminium windows/ventilators/partitionsany type including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, along with standard locking arrangements, handles, tower bolts etc as required. complete all as specified and directedNote:- (i) Labour charges for fixing of glass/wire guage/aluminum grills is inclusive in the unit rate quoted. Glass/Wire Guage/aluminum grills shall be measured and paidseperately at supply only rates (ii) Design/pattern, profile sizes and other dimensions shall be of standard sizes and as directed |
| 16 | Supply only 4mm thick tinted glass, ordinary quality fixed with Aluminum frame work n. exc 0.5 sqm in each pane complete all as specified and as directed. |
| 17 | Supply only 4 mm thick tinted glass, ordinary quality fixed with Aluminum frame work exc 0.5 sqm in each pane complete all as specified and as directed. |
| 18 | M&L for 12 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed to aluminiumframe work complete all as specified and directed |
| 19 | S&F instainlesssteel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 20 | S&F in repair stainlesssteel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 21 | M&Lhacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete, all as specified and as directed. |
| 22 | M&L for 3 mm thick sheet glass ordinary qualityand glazing with oil putty in squares not exc. 0.5 Sqm in each pane complete all specified and as directed. |
| 23 | S&F 200 mmlong Aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and as directed. |
| 24 | S&F 125 mmlong Aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and as directed. |
| 25 | S&F 300 mm aluminium alloy sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy fixed complete all as specified and as directed. |
| 26 | S&F 150 mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed. |
| 27 | S&F 100 mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed. |
| 28 | S&F 100 mm size Butt hinges, medium weight, cold rolled mild steel and fixed complete all as specified and as directed. |
| 29 | S&F 75 mm size Butt hinges, medium weight, cold rolled mild steel and fixed complete all as specified and as directed. |
| 30 | S&F 100 mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 &ISI marked complete all as specified and directed. |
| 31 | S&Fmild steel hold fasts; for securing chowkhats and similar small articles conforming to Fe-290 Gde-E-165 incuding treating hold fast with tar or coal tar black paint, sandingcomplete all as specified and as directed. |
| 32 | M&Lproviding plain cementconcrete type C-1, (1:3:6), (using 20 mm graded stone aggregate), as in copings,fixing of hold fast, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed. |
| 33 | S&F in repair floor door spring metal body of required size complete all asspecified and as directed |
| 34 | M&L for preparing new wooden surfaces of any description, not otherwise describe over 10cm width or girth and applyingtwo coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 35 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards /slabs/ blankets, any thickness, including cover fillets complete all as directed. |
| 36 | S&Fpowder coated anodised aluminium interlocking snap grid frame work size (600 mm x 600 mm) consists of main tee runners of size 38mm x 25mm x1.5mm and cross wall angle of size 25 mm x 25 mm x 1 mm spaced between the main Tee at 600 mm centre to centre to form a grid of 600 mm x 600 mm etc completeincluding necessary notching preparing holes and supporting hanger comprising of J hooks soffit cleat holding clip, level clip etc as per manufacturer instructions complete all as specified and directed. |
| 37 | M&L for 4 mm thick, Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Alumi nium framework with screwscomplete all as specified and as directed. |
| 38 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed |
| 39 | S&F of mild steel framed work such as grills, gratings etc. with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar work conforming to Fe-290 Grade E-165complete all as specified and directed. |
| 40 | S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 1161-1998 grade St-240 complete all as specified and directed. |
| 41 | M&L preparing new Steelsurfaces of any description, not otherwise describe over 10cm width or girth and applyingtwo coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 42 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as directed. |
| 43 | S&F Prepainted galvalume aluminium zink coating GI based corrugated/semi corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 44 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screwscomplete all as specified and as directed. |
| 45 | M&Lforbituminous primer @ 0.30 KG/Sqm over the cementplaster inclpreparation of surfacesas permanufacturers instruction complete all as specified andas directed by the Engr-in-Charge. |
| 46 | M&L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified |
| 47 | Demolition of brick work/ block masonry or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles and removal all rubbish material complete all as specified directed. |
| 48 | Materials and labour for Brick work with sub class \"B\" bricks straight or curved on plan exc 6.00 m mean radius built in CM 1:6 complete as specified and directed. |
| 49 | M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed. |
| 50 | Taking down cement or cement lime plaster any description on any walls etc including raking out joints, hacking etc complete all as specified and as directed. |
| 51 | M&L for 15mm thick rendering with cement mortar (1:4)on fair faces of brick work in two layers (10mm& 5mm) seperately mixed with water proofing compound in top layer as per manufacturer\"s instructions and finishing the surface even and fair without using extra cement complete all as specified and as directed.Note:- WPC shall be measured and paid seperately under appropiate item. |
| 52 | Supply only liquid water proofing compound complete allas specified and as directed. |
| 53 | M&L for rendering 10 mm thick onfaces of brick work or concrete surface in CM (1:6), finished even and smooth without using extra cementcomplete all as specified and directed. |
| 54 | M&L Preparing new plastered surface. and applying two coats acrylic distemper over one coat of primer complete all as specified and directed. |
| 55 | M&L for preparing newly plastered or unplastered walls surfaces and applying two coats of cement base paint over and including a coat of cement base primer complete all as specified and directed. |
| 56 | M&L for preparation of old plastered surfaces of walls and applying two coat of cement base paint complete all as specified and directed. |
| 57 | M&L for preparation of old surfaces of walls and distempering one coat with 1st quality acrylic distemper/oil emulsion paint of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification. complete all as specified and directed. |
| 58 | M&L for preparation of old surfaces of ceilingand distempering one coat with 1st quality acrylic distemper/oil emulsion paint of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification. complete all as specified and directed. |
| 59 | M&L complete removal of existing treatment on wall and apply two coat of oil bound distemper over one coat of primer over 3 mm thick wall care putty complete all as specified and directed |
| 60 | M&L for preparation of old or previously treated steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 61 | Demolition Stone slabs and tiles of any description or thickness in floors, aprons etc laid and pointed in any mortar |
| 62 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 63 | M&L 25 mm thick PCC B-0, (1:2:4) using 12.5 mm graded crushed stone aggregate as in PCC underlayer complete all as specified and directed. |
| 64 | M&L 75mm thick cement concrete (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection and finished even and smooth without using extra cement complete all as specified and as directed. |
| 65 | Dismantling floorhearth or wall tiling including cement mortar bedding but not backing and removing debrires from the site complete all as specified and as directed. |
| 66 | M&L Virified Ceramic light shade tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including cement screed 15 mm thick 1:6 complete all as specified and as directed. |
| 67 | M&L Virified Ceramic light shade tiles 10 mm thick (square/ rectangular) polished in vertical surfaces and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick backing with CM (1:4) complete all as specified and as directed. |
| 68 | M&L Coloured glazed ceramic tiles 300 x 450 x 7 mm/450 x 350 x 7mm thick in vertical surfaces and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick backing with CM (1:4) complete all as specified and as directed. |
| 69 | M&L Non skid coloured tiles7 to 8mm thick(square/ rectangular) area of each tiles exc.11 sqm but not exc 0.18 sqm in flooretc set and jointed in neat cement slury over and including cement screed 15 mm thick 1:6 complete all as specified and as directed. |
| 70 | M&L 18-20mm thick black Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in over and including20mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including necessary dismantling of existing unserviceable one complete all as specified and as directed. |
| 71 | S&F machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 Grade laid over including 50mm thick sand bed layer complete all as specified and as directed. |
| 72 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed |
| 73 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls for 110 mm bore of pipe as in rain water/soil waste etc complete all as specified and directed. |
| 74 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls for 75 mm bore of pipe as in rain water/soil waste etc complete all as specified and directed. |
| 75 | Takingup or down 15 mm bore GIpipe and connection complete all as specified and as directed. |
| 76 | M&L for 15 mm bore tubes, medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed |
| 77 | Takingup or down 20 mm bore GIpipe and connection complete all as specified and as directed. |
| 78 | M&L for 20 mm bore tubes, medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed |
| 79 | Takingup or down 25 mm bore GIpipe and connection complete all as specified and as directed. |
| 80 | M&L for 25 mm bore tubes, medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed |
| 81 | Supply and fix in repair 24\"x31\"x10\" Stainless steel kitchen plate rack fixed with chromium plated brass screws and cup washers complete all asspecified and as sdirected. Make- JAINKO- CAT No-KRJ-2 or equivalent as approved by GE from list of approved make. |
| 82 | S&F Rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top) (conforming to IS 12701-1996) multi layer hoisted and fixed in position 500 ltrs capacity complete including dismantling of tank complete all as specified in SSR Part I complete all as specified and as directed |
| 83 | S&F Rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top) (conforming to IS 12701-1996) multi layer hoisted and fixed in position 1000 ltrs capacity complete including dismantling of existing tank complete all as specified in SSR Part I complete all as specified and as directed |
| 84 | S&F in repair ball valve high pressure of PTMT suitable for 20mm bore pipe (minimum weight -210Gm) with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and directed |
| 85 | S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including 150mm cement concrete (1:5:10) type E-2using 40mm graded crushed stone aggregate) complete all as specified and as directed. |
| 86 | S&F in repair, 10 ltr capacity PVC valve less, symphonic action type,flushing cistern, low level, withinlet ball valve, float and brackets includingflush pipe and PVC connection pipe 15mm bore with PTMT nuts of length 450mm, complete all as per directed byEngr-in-charge. |
| 87 | S&F in repairs coloured plastic water closet seatcover, closed pattern with flat bottom including mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 88 | S&F in repair Health faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in allas specified. |
| 89 | S&F toilet paper holder with flat recessed type stainless steel complete all as specified and directed |
| 90 | S&F in repairs 15 mmborebib tapcastcopperalloy with crutch or butterflyhandlescreweddown,screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engineer-in-Charge. |
| 91 | S&F in repair vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe)complete all as specified and as directed. |
| 92 | S&F in repairs vitreous china wash basin, white, flat back, size550x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets including cutting for and pinning in ends of brackets or erecting stand complete all as specified and as directed. |
| 93 | S&F in repair 15 mm bore pillar taps, cast copper alloy chromium plated with capstan head screwed down high pressure, with or without lettered HOT or COLD with long screwed shanks and fly nuts, screwed fly nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 94 | S&F in repair 600 x 450mm bevelled edge mirror of selcted quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers all as specified complete all as specified and as directed |
| 95 | S&F in repair tubular towel rail 600 mm long of PTMT fixed with and including chromium plated brass screws and wooden / plastic cleats (mimimum weight 190 gms), complete all as directed. |
| 96 | S&F in repair 15 mm stop valves (concealed type), cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed fancy type, chromium plated |
| 97 | S&F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing canilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mmx330mmx160mm complete all as specified and directed . |
| 98 | Supply and fix 75mm bore PVC (SWR) bends of any radius complete all as specified and as directed. |
| 99 | Supply and fix in repairs 110mm bore PVC (SWR) junction single (Single \"T\") equal or unequal with access door complete all as specified and as directed. |
| 100 | Supply and fix in repairs 110mm bore PVC (SWR) bends of any radius complete all as specified and as directed. |
| 101 | S&F in repairs 15mm bore PVC connections, with PTMT nuts of length 450mm complete all as specified and directed. |
| 102 | S&F in repair Door closer hydraulically regulated,designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified |
| 103 | S&F 30mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commerical type on both sides complete all as specified and directed. |
| 104 | S& F 30 mm thick 2nd class hard woodglazed and skeleton shutters, divided into squres open rebated and prepared to receive glass, gauze, etc, (with sash bars),edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, sizes of members of shutters, if windows , ventilators, etc are provided with stiles and rails as specified in SSR Part -I. section 8, clause 8.24(b)complete, all as specified and as directed. |
| 105 | S&F 5.5 mm thick tinted glass andfixed to aluminium frame workin squares exceeding 0.50 sqm in each pane complete all as specified and as directed. |
| 106 | S&F 100 mm aluminum handle fabricated type anodized, complete all as specified. |
| 107 | M&L for Preparation of New surfaces of wallsand applying two coat of distempering with 1st quality acrylic distemper(ready mixed) having VOC content less than 50gms/litre, of approved manufacturer, of required shade and colour complete all as specified and directed |
| 108 | Supply, fixing and errecteing in position in repairs steel rolling shutters with thickness of laths 1.25 mm , push pull or manual type with out ball bearingincluding top cover, bottom plate,anchoring rod, hasp and staple, mild steel handle including applying one shop coat of red oxide primer, erected in position complete all as directed.Note: Net area of opening shall be measured for purpose of payment. |
| 109 | S&F saftey lever locks mild steel with 4 levers for rolling shutters all as specified and directed |
| 110 | Taking down and opening the existing Steel rolling shutter, pull push type,not exc 12sqmeach in area as clear opening, including hood cover, cleaning the sides guides , suspended shaft, anti guide channels, straightening/rolling shaft and replacement of bolts & nutsafter greasing all the moving parts of rolling shutter and refixing in the same opening to make it for smooth functioningcomplete all as specified & as directed. |
| 111 | All as per item No.110.00 here-in-above but gear operated shutter area exc 12 Sqm but not exc 25 sqm each including adjustment of gear assembly. |
| 112 | M&L for cleaning and degermination of water storage tank 500 Ltr capacitr of any description and in any position and making locking arrengment to tank cover comprising following seven stages of operation complete all as under (i) Drain out the water by using exit valve or our own high capacity dewatering system (ii) Cleaning all the algae formation inside the tank by using laboratory tested branded chemical of the company and scrubbing the walls of the tanks. (iii) Fresh water cleaning by high speed jet pumpwith pressure 5 PSI. (iv) First bacteria screening is Sterilization by usingLaboratory certified branded compound, (v) Cleaning the floor of the water tank byheavy duty industrial vacuum cleaner. (vi) Second bacteria screening and sterilizing method by using ultra violet ray Ejector covering 360 degree with in the tank and kills all suspended bacteria. (vii) Cleaning and third bacteria screening is to sterilize the floor of the water tank by using laboratory certified branded strong oxidizing agent and complete all as specified and directed |
| 113 | All as per item No.112.00 here-in-above but 1000 Ltr capacity |
| 114 | All as per item No.112.00 here-in-above but 2000 Ltr capacity |
| 115 | All as per item No.112.00 here-in-above but 5000 Ltr capacity |
| 116 | M&L for Removal of wild growth / plants /shrubs on external surface of bldgs at any height upto root level including making good the distrubed surface in cement mortar 1:4 with water proofing compound as per manufacturers instructions and directed by Engr-in-Charge |
| 117 | Supply only PVC cover for 500 Ltr PVC water storage tank |
| 118 | Supply only PVC cover for 1000 Ltr PVC water storage tank |
