|
| 1 | Earthwork in excavation for foundation of structure as per drawings and technical specification, including setting out, construction of shoring and bracing, removal of sumps and other deleterious matter, dress of sides and bottom backfilling with approved material. |
| 2 | PCC Grade M-15 in open Foundation complete as per drawing and Technical specifications. |
| 3 | Brick masonry work in cement mortar 1:3 in parapet excluding pointing and plastering as per drawing and technical specifications Clauses 600, 900 and 1208.4 |
| 4 | Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications |
| 5 | Rainforced cement concrete M 25 grade approach slab including reinforcement and formwork complete as per drawing and technical specifications clauses 800and 1211 |
| 6 | Rectification of Bearings as per Technical Specifications |
| 7 | Replacement of Expansion Joints complete as per drawings |
| 8 | Construction of K.C.Drain in both sides of the road etc. up to out fall |
| 9 | Construction of Chute Drain |
| 10 | Fabrication and supply of steel Railing including cost of steel allcarriage welding cutting labour grinding smooth finishing including applying of one coat of red oxide steelprimer paint required for proper completion of the work as per direction of Engineer in charge. |
| 11 | Wall painting (two coats) with plastic emulsion paint of First quality approved brand and manufacture on undecorated wall surface to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter and sand prepared smooth. |
| 12 | Painting Iron work in large area with one coat ready mixed paint priming one coat ofapproved paint (British ANTISOL or equaivalent) including supply of all materials labour and T&P etc.required for proper completion of the work paint to be used should conform to the I.S.I No 130-1950 |
| 13 | Supply and installation of delinators (Roadway indicators, hazard markers, obejct marker) 80-100 cm. high above ground level, painted black and white in 15 cm wide strips, fitted with 80x100 mm rectangular or 75mm dia circular reflectorised panel at the top buried or pressed into the ground and confirming to IRC:79 and the drawings. |
| 14 | Providing and erecting a \"W\" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail , 70 cm above road /ground level ,fixed on ISMC series channel vertical post ,150 x 75 x 5 mm spaced 2 m centre, 1.8 m hight 1.10 m below groung /road level,all steel parts and fitments to be galvanised by hot dip process,all fitting to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330mm long complete as per clause 810. |
