Tender For Repair And Painting Works At Government Iti, Gulabpura. District Bhilwara - 1 13.1 Repairs To Plaster Of Thickness 12Mm To 20Mm In Patches Of Area 2.5 Sq. Metres And Under Including Cutting The Patch In Proper Shape, Raking Out Joints And Pre, gulabpura-Rajasthan

Tender For Repair And Painting Works At Government Iti, Gulabpura. District Bhilwara - 1 13.1 Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead With cement mortar 1 :4 ( 1 cement : 4 coarse sand) Sqm 235.00 400.0094000.002 12.9 Rough cast plaster upto 10m height above ground level with a mixture of sand and gravel or crushed stone from 6mm to 10mm nominal size dashed over and including the fresh plaster in two layers, under layer 12mm cement plaster 1:4 (1 cement : 4 coarse sand) and top layer 10mm cement plaster 1:3 (1 cement : 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement. Ordinary cement finish using ordinary cement Sqm 340.00 120.0040800.003 13.29 Repair to damaged RCC slabs, beams and columns etc for strengthening with cement mortar 1 : 2 in following steps :- (i) Choping losse and cracked concrete to required depth, cleaning the exposed surface of steel and concrete with wire brush and sand papering , cleaning of concrete surface with water as necessary and getting dried. (ii) Applying Epoxy primer on the exposed steel bars. (iii) Applying Epoxy hardener and resin mix (as per manufectureds specification) on concrete and steel bars with brush. (iv) Speading dry cement mortar 1 : 2 mix over epoxy treated wet surface and allow it to dry for one day. (v) Plastering the surface with cement sand mortar 1 : 3 upto depth of 30mm complete. (vi) Cure the plastered surface for 15 days, All work including scaffolding etc. complete in all respect. Sqm 1568.00 40.0062720.004 12.37.3 Removing dry or oil bound distemper by scrapping sand papering and preparing surface smooth including necessary repairs to scratches by sandla/loi and all scaffolding (for colour Sqm 4.00 8000.0032000.005 12.22 Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth a 12.22.1 New Plastered Surface (three or more coats) Sqm 84.00 1000.0084000.00b 12.22.2 Old Plastered Surface (two or more coats) Sqm 46.00 3000.00138000.006 12.4 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding: a 12.40.1 Two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect. Sqm 80.00 3000.00240000.00b 12.40.2 Old work (One or more coats ) Sqm 40.00 2000.0080000.007 12.43 Painting exterior surface of Wall with 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer, putty, etc complete in all respect including scaffolding and safety provision a 12.43.1 New Work Sqm 123.00 2000.00246000.00b 12.43.2 Old Work Sqm 50.00 500.0025000.008 12.4 Finishing walls with textured exterior paint of required shade as per approved colour complete as per manufacturers specifications including primer coat and protecting coat including scaffolding and safety provision 12.44.2 Trowel Finish av. thickness 1000 to 1200 microns. Sqm 347.00 500.00173500.009 12.45 Applying priming coat : 12.45.3 With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works Sqm 23.00 500.0011500.00ITI Gulabpura painting Page 1 of 2 S.No BSR Item no. Description Unit Rate QuantityAmount10 12.46 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : a 12.46.1 Two or more coats on new work Sqm 69.00 500.0034500.0011 13.4 Renewing glass panes,with putty and nails wherever necessary a 13.4.1 Float glass panes of thickness 4 mm Sqm 617.00 40.0024680.00b 13.8 Renewal of old putty of glass panes (length) Rm 18.00 500.009000.0012 17.35 Providing and Fixing Chiken wire mesh at the joint of masonry members/ R.C.C. Members with Nails complete in all respect. Sqm 77.00 150.0011550.0013 5.16 Brick work with mechanised autoclaved flyash lime bricks conforming to IS: 12894 :2002 of class designation 100 in superstructure above plinth level upto floor V level in. 5.16.2 Cement mortar 1 : 6 (1 cement : 6 coarse sand) Cum 4645.00 4.0018580.0014 9.8 Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide Kg 96.00 285.0027360.0015 3.16 P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm 2 .) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. a 3.16.3 110 mm dia Mtr 282.00 50.0014100.0016 3.17 P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: a 3.17.1 Coupler (socket) i (ii) 110mm dia Each 108.00 20.002160.00b 3.17.9 Bend 87 .5 i (ii) 110mm dia Each 161.00 30.004830.00c 3.17.15 Pipe Clip i (ii) 110mm dia.

INR 1000 /-

INR 27520.0 /-

INR 13.76 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB