Tender For Repair / Maintenance To Wooden Furniture In Army Area At Udaipur Mil Stn, udaipur-Rajasthan

Tender For Repair / Maintenance To Wooden Furniture In Army Area At Udaipur Mil Stn; 1 Material and Labour for preparation of old polished wooden surfaces by grinding orscrapping and filling Caritics if any, with filler/putty to achieve even and smooth surface , sand papered and applying coat(s) of french polish ready made of brand approved to the following furniture to acheieve uniform glossy finish to the entire satisfactionof Engineer-in-charge complete all as specified and directed . 2 (A)Ditto but polishing Peg Table -ditto-. 3 (B) Ditto but polishing Sofa set 4 seater -ditto-. 4 (C ) Ditto but polishing Sofa set 5 seater -ditto-. 5 (D) Ditto but polishing Table Writing-ditto-. 6 (E) Ditto but polishing Table Centre. 7 (F) Ditto but polishing Table Bed side . 8 (G) Ditto but polishing Table dinning 6/8 person. 9 (H) Ditto but polishing Table 3x2 with drawer/without drawer -ditto-. 10 (J) Ditto but polishing Teapoy -ditto-. 11 (K) Ditto but polishing Side Board -ditto-. 12 (L) Ditto but polishing Table dressing ladies -ditto-. 13 (M) Ditto but polishing Table dressing gents -ditto-. 14 (N) Ditto but polishing Chair dinning with long back -ditto-. 15 (O) Ditto but polishing Chair Dining -ditto-. 16 (P) Ditto but polishing Chair Easy -ditto-. 17 (Q ) Ditto but polishing Chair Writing -ditto-. 18 (R) Ditto but polishing Hat stand with mirror -ditto-. 19 (S) Ditto but polishing Chair wooden bottom -ditto-. 20 (T) Ditto but polishing Stool Dressing CB -ditto-. 21 Material and Labour for replacementofold existing unserviceable wooden members of CHAIR DINING and supply and replacement of broken parts of wooden furniture by 1st class Hard wood(Teak wood)members well seasoned free from knotsduly finished to match with existing finish, fabricated as per shape & size fixed with suitable size bamboo pins and fevicol including tightening of other joints as directed by Engineer -in-charge and shown in drawing. 22 (A) Front leg 23 (B) Rear leg 24 (C) Side rail with hole 25 (D) Front/back rail with hole 26 (E) Stiffener bottom 27 (F) Back rest made slightly curved in shape 28 Material and Labour for replacementofold existing unserviceable wooden members of Chair Writing and supply and replacement of broken parts of wooden furniture by 1st class Hard woodmembers well seasoned free from knotsduly finished to match with existing finish, fabricated as per shape & size fixed with suitable size bamboo pins and fevicol including tightening of other joints as directed by Engineer -in-charge and shown in drawing. 29 (A) Front leg 30 (B) Rear leg 31 (C) Side rail with hole 32 (D) Front/back rail with hole 33 (E) Stiffener bottom 34 (F) Back rest 35 (G) Arms 36 Material and Labour for replacementofold existing unserviceable wooden members of Chair easy and supply and replacement of broken parts of wooden furniture by 1st class Hard woodmembers well seasoned free from knotsduly finished to match with existing finish, fabricated as per shape & size fixed with suitable size bamboo pins and fevicol including tightening of other joints as directed by Engineer -in-charge and shown in drawing. 37 (A) Front leg 38 (B) Rear leg 39 (C) Front/Back frame with hole 40 (D) Hand rest 41 Material and Labour for replacementofold existing unserviceable wooden members of Chair Dining Officer and supply and replacement of broken parts of wooden furniture by 1st class Hard woodmembers well seasoned free from knotsduly finished to match with existing finish, fabricated as per shape & size fixed with suitable size bamboo pins and fevicol including tightening of other joints as directed by Engineer -in-charge and shown in drawing. 42 (A) Front leg 43 (B) Rear leg 44 (C) Side rail 45 (D) Front/back rail 46 (E) Stiffener bottom 47 (F) Back rest (TW Ver Strips) 48 Material and Labour for replacementofold existing unserviceable wooden members of Sofa set 4/5 seater and supply and replacement of broken parts of wooden furniture by 1st class Hard woodmembers well seasoned free from knotsduly finished to match with existing finish, fabricated as per shape & size fixed with suitable size bamboo pins and fevicol including tightening of other joints as directed by Engineer -in-charge and shown in drawing. 49 (A) Three Seater Front leg 50 (B)Three Seater Rear leg 51 (C )Three Seater Side rail 52 (D)Three SeaterFront /Back Rail 53 (E )Three Seater Front/Back Wooden Battens 54 (F) Three Seater Front/Back wooden Bearers 55 (G) Three Seater Hand rest 56 (H) Three Seater 12 mm ply for Back/Bottom 57 (J) Single Seater Front leg 58 (K)Single Seater Rear leg 59 (L)Single Seater Side rail 60 (M) Single SeaterFront /Back Rail 61 (N) Single Seater Front/Back Wooden Battens 62 (O) Single Seater Front/Back wooden Bearers 63 (P) Single Seater Hand rest 64 (Q) Single seater 12 mm ply for Back/Bottom 65 Material and Labour for replacementofold existing unserviceable wooden members ofChair wooden bottom and supply and replacement of broken parts of wooden furniture by 1st class Hard woodmembers well seasoned free from knotsduly finished to match with existing finish, fabricated as per shape & size fixed with suitable size bamboo pins and fevicol including tightening of other joints as directed by Engineer -in-charge and shown in drawing. 66 (A) Front leg 67 (B) Rear leg 68 (C) Side rail 69 (D) Front/back rail 70 (E) Stiffener bottom 71 (F) Back rest 72 Removing old unserviceable plywood seat from Chair wooden bottom and Supply and fixing of new plywood seat of 6mm thick BWR quality ISI marked. complete all as specified in drawing and as directed by Engr-in charge. 73 Material and Labour for replacementofold existing unserviceable wooden members ofTable Centre/2 tier and supply and replacement of broken parts of wooden furniture by 1st class Hard woodmembers well seasoned free from knotsduly finished to match with existing finish, fabricated as per shape & size fixed with suitable size bamboo pins and fevicol including tightening of other joints as directed by Engineer -in-charge and shown in drawing. 74 (A) Legs 75 (B) Long rail 76 (C) short rail 77 (D) Stiffeners 78 Material and Labour for replacementofold existing unserviceable wooden members of Peg Table and supply and replacement of broken parts of wooden furniture by 1st class Hard woodmembers well seasoned free from knotsduly finished to match with existing finish, fabricated as per shape & size fixed with suitable size bamboo pins and fevicol including tightening of other joints as directed by Engineer -in-charge and shown in drawing. 79 (A) Legs 80 (B) Long rail 81 (C) short rail 82 (D) Stiffeners 83 Material and Labour for replacementofold existing unserviceable wooden members of Teapoy wooden and supply and replacement of broken parts of wooden furniture by 1st class Hard woodmembers well seasoned free from knotsduly finished to match with existing finish, fabricated as per shape & size fixed with suitable size bamboo pins and fevicol including tightening of other joints as directed by Engineer -in-charge and shown in drawing. 84 (A) Legs 85 (B) Long rail 86 (C) short rail 87 (D) Stiffener 88 Material and Labour for replacementofold existing unserviceable wooden members of Table 3X2 without drawer and supply and replacement of broken parts of wooden furniture by 1st class Hard woodmembers well seasoned free from knotsduly finished to match with existing finish, fabricated as per shape & size fixed with suitable size bamboo pins and fevicol including tightening of other joints as directed by Engineer -in-charge and shown in drawing. 89 (A) Legs 90 (B) Long rail 91 (C) short rail 92 (D) Stiffener 93 Material and Labour for replacementofold existing unserviceable wooden members of Table 3X2 with drawer and supply and replacement of broken parts of wooden furniture by 1st class Hard woodmembers well seasoned free from knotsduly finished to match with existing finish, fabricated as per shape & size fixed with suitable size bamboo pins and fevicol including tightening of other joints as directed by Engineer -in-charge and shown in drawing. 94 (A) Legs 95 (B) Long rail 96 (C) Drawer with knob 97 (D) short rail 98 (E) Stiffener 99 Material and Labour for replacementofold existing unserviceable wooden members of Table dining 6/8 person and supply and replacement of broken parts of wooden furniture by 1st class Hard woodmembers well seasoned free from knotsduly finished to match with existing finish, fabricated as per shape & size fixed with suitable size bamboo pins and fevicol including tightening of other joints as directed by Engineer -in-charge and shown in drawing. 100 (A) Legs 101 (B) Long rail 102 (C) short rail 103 (E) Stiffener 104 Removing old unserviceable & broken parts of Side Boardand Supply & fixing of new parts of 18/19mm prelaminated particle board ISI marked phenol formaldehyde bonded including 4mm thick 1st class teak wood beadingComplete all as specified & shown on drawing and as directed by Engr-in-charge. 105 (A) Top/Bottan 106 (B) Left/Right sides 107 (C) Drawers with knob 108 (D) Shelf 109 (E) Shutter door including piano hinge & Knob 110 (F) Teak Wood frame for botton 111 (E) Knods 112 Supply and fixing of broken parts of Table writing by 18/19 mm thick commercial block board with 1 mm thick lamination sheet on one face duly finish fabricated as per existing shape and size, fixed with suitable size bamboo pins and fevicol including tightening of other joints if any complete all as per specified and shown in drawing and as directed by Engr-in-Charge:- 113 (A) Legs. 114 (B) Long rail. 115 (C) Short rail. 116 (D)18/19 mm thick commercial block board with 1 mm thick lamination sheet on one facefor Right and left side of the box 117 (E) Drawer with knob. 118 (F) Back Side. 119 (G) Shutter / Door with one CB knob, two hinges and Shelf. 120 (H) Long stiffener. 121 (J) Short stiffener. 122 (K) 6 mm ply 123 Removing old unserviceable & broken parts of Table bed sideand Supply of new parts of 18/19mm prelaminated particle board ISI marked phenol formaldehyde bonded including 4mm thick 1st class teak wood beading and all around 16 Gauge 20mm square conduit pipe . Complete all as specified & shown on drawing and as directed by Engr-in-charge. 124 (A) Top 125 (B) Bottom 126 (C) Shelf/Drawers 127 (D) Left/Right sides 128 (E) Conduit frame incl back side,front side 129 Removing old unserviceable & broken parts of Table bed sideand Supply of new parts of 18/19mm prelaminated particle board ISI marked phenol formaldehyde bonded including 4mm thick 1st class teak wood beadingComplete all as specified & shown on drawing and as directed by Engr-in-charge. 130 (A) Top 131 (B) Bottom 132 (E) Left/Right sides 133 Removing old unserviceable & broken back side of Table bed sideand Supply of new back side of 6mm thick comercial plywood BWR quality ISI marked. Complete all as specified. 134 Removing of old/unserviceable and Supply and fixing new 75 mm thick 40 density foam seat covered with fabric/tapestry cloth of CHAIR DINING OFFRS, good quality as approved by AGE(I), complete all as specified and directed. 135 Removing of old/unserviceable and Supply and fixing new 75 mm thick 40 density foam seat covered with leatherite/fabric or tapestry cloth of DRESSING TABLE STOOL, good quality as approved by AGE(I), complete all as specified and directed. 136 Removing old unserviceable plastic cane and Supply & Recanning of furniture with 2mm wide half-round cream/white colour plastic cane & 4 mm wide cane for closing the holes including removing old cane complete as specified and shown on drawing. 137 (A) Chair dinning 138 (B) Chair writing 139 (C) Chair easy 140 (D) Stool dressing CB 141 Removing old unserviceable parts of Table dressing ladies and Supply and fixing new parts of 18mm commercial block board BWR quality ISI marked laminated with 1mm thick lamination sheet, looking mirror of 5mm thick with 6mm thick back ply commercial type BWR quality ISI marked including 1st class TW frame all around the mirror.Complete all as specified & directed by Engr-in-charge. 142 (A) Top/ Bottom 143 (B) Sides 144 (C) Drawer with knob 145 (D) Looking mirror 146 (E) Back frame 147 (F) Back ply of mirror 148 (G) Sliding mirror 149 (H) Aluminium chennal for sliding mirror 150 (J) Back ply of box 151 (k) Knobs 152 Removing old unserviceable parts of Table dressing ladies Incl stool and Supply and fixing new parts of 18mm commercial block board BWR quality ISI marked laminated with 1mm thick lamination sheet, looking mirror of 5mm thick with 6mm thick back ply commercial type BWR quality ISI marked including 1st class TW frame all around the mirror.Complete all as specified & directed by Engr-in-charge. 153 (A) Top/Side 18 MM TH PRE LAMINATED MDF AS SPEC 154 (B) Bottom 12 MM TH PLYWOOD 155 (C) Drawer with 50 MM LONG D SHAPED STAINLESS STEEL HANDLE AS SPEC. 156 (D) 5 MM TH. ELECTRO COPPER PLATED MIRROR OF POLISHED SHEET GLASS AS SPECIFIED 157 (E) TW 25X20 ALROUND MIRROR FRAME 158 (F) 6 MM TH. PLY WOOD BACK of mirror 159 (G) 1NOS PER SHUTTER STAINLESS STEEL PIANO HINGE AS SPEC(02 Nos) 160 (H) 75 MM LONG D SHAPED STAINLESS STEEL HANDLE 161 (J) 75 MM FOAM 40 D CUSHION COVERED WITH LEATHERITE AS SPEC 162 (K) 12MM TH PLY OPENABLE SHUTTER 163 (L) 50mm Dia HEAVY DUTY REVOLVING NYLON DOUBLE WHEELS 164 (M) Drawer TELESCOPIC Channel 165 (N)MAGNETIC CATCHER WITH STAINLESS(1NOS), 166 Removing old unserviceable parts of Hat Stand with Mirror and supply and fixing new parts of 19mm thick particle board. 1.5 mm thick prelaminated teak face sheet, looking mirror of 5mm thick with 6mm thick back ply commercial type BWR quality ISI marked including 1st class TW frame all around the mirror complete all as specified and directed by Engr-in-Charge:- 167 (A) Looking mirror 168 (B) Back frame. 169 (C)Back ply of mirror. 170 (D)Hanging clips 171 (E) Clamps 4 nos 172 Removing old unserviceable/missing hard pvc shoe from all types of wooden furniture articles and Supply and fixing new hard PVC shoe.Complete all as specified & shown on drawing and as directed by Engr-in-charge. 173 Removing old unserviceable top of following furniture articles and Supply and fixing of new top of 18mm thick prelaminated particle board ISI marked phenol formaldehyde bonded including 4 mm beading of 1st class Hard wood(Teak wood) (teak wood) all around the top and apply two coat of french polish to achive glossy finish complete all as specified in drawing and as directed by Engr-in-charge. 174 (A) Table centre/ 2 tier 175 (B) Table dining 6/8 person 176 (D) Teapoy wooden 177 (E) Peg table 178 (E) Table writing 179 (F) Table 3x2 with/witout drawer 180 Supply and fixing of wooden brackets triangular shaped and size 75X75mm of 1st class Teak wood and fixed to wooden Chairs by using screws & adhesive complete all as specified & directed by Engr-in-Charge. 181 Removing of old unserviceable Foam cushion and Supply and fixing new 100 mm thick synthetic cushion of 40 density cool foam for a seat or a back ,complete all as specified and directed Note:- (One Nos of seat or back shall be measured and paid as one unit). Make: Sleepwell/Courlon/Dunlop 182 Removing of old faded cushion cover only of a seat or back of SOFA SET 5 /4 SEATER and Supply and fixing new cover only for 100 mm thick cushion with tapestry cloth of good quality and shade as approved by AGE(I). Note:-(One Nos of seat or back shall be measured and paid as one unit). 183 Removing of old/unserviceable and Supply and fixing new 4 x 10 mm thick RIBS moulded along with seat in single piece and PVC seat 4mm thick with holes & screwed with frame of CHAIR DINING JCO/ORS of good quality as approved by AGE(I), complete all as specified and directed. 184 (A) Front leg 185 (B) Rear leg 186 (C) Side rail with hole 187 (D) Front/back rail with hole 188 (E) Stiffener bottom 189 (F) Arms

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	13-06-2025	Bid Auto Extn Corrigendum	Bid Auto Extn Corrigendum	20-06-2025

INR 500 /-

INR 18000.0 /-

INR 9 Lakhs /-