Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 13-06-2025 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 20-06-2025 |
| 2 | 03-06-2025 | Corrigendum25 | BOQ | 13-06-2025 |
| Sl. No. | Item Description |
| 1 | Excavation in post holes (or similar holes) each n exc 0.5 cum, getting out in any type of soil and removing soil to a distance n exc 50 m and making good surface complete all as specified and directed. |
| 2 | S&F hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 3 | M&L for cement concrete (1:3:6) type C-2 (using 40 mm graded crushed stone aggregate) as in foundations filling and mass concrete complete all as specified and directed. |
| 4 | Supply only chain link MS galvanised fencing, any size or type (weight not less than 2.8 Kg/ sqm) as complete all as specified and directed.Note : Actual weight of the fencing shall be ascertained by Board of Officers to be convened by GE. |
| 5 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed. |
| 6 | M&L for mild steel round bars 10 mm dia or over, cut to length, bend to shape required, fixed independently to support chain link fencing conforming to Fe-410-W (Gde. E-250) quality-A or Fe 290 (Gde E-165) complete all as specified and directed. |
| 7 | S&F mild steel screw bolts, dia of neck 5 to 10mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and directed. |
| 8 | M&L for preparation of new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 9 | Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, laying of pipe and cable etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in any type soil complete all as specified and directed. |
| 10 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick in soils complete all as specified and directed. |
| 11 | Removing excavated material (soils) n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. |
| 12 | M&L for brick work with sub class \"B\" old size bricks, straight or curved on plan exceeding 6 m mean radius built in CM (1:4) complete all as specified and directed. |
| 13 | M&L for providing plain cement concrete (1:2:4) type B1 (using 20 mm graded crushed stone aggregate) as in coping including weathering rounded/ chamfered angles and throating as directed including use and waste of necessary form work complete all as specified and directed. |
| 14 | M&L for rendering 15 mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 15 | M&L for preparation of new plastered surface of wall and applying two coats of cement base paint complete all as specified and directed. |
| 16 | M&L for cement concrete (1:4:8) type D-2 (using 40 mm graded crushed stone aggregate) as in foundations filling and mass concrete complete all as specified and directed. |
| 17 | M&L for rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to Fe 410-W (Gde E- 250) quality-A complete all as specified and directed. |
| 18 | Use and waste of formwork to sides of flat rough finished surfaces of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed. |
| 19 | Use and waste of formwork to sides of square, rectangular or polygonal rough finished surfaces of concrete pillars, posts, struts, piers, columns and stanchions complete all as specified and as directed. |
| 20 | M&L for reinforced cement concrete (1:2:4), type B1 (using 20 mm graded crushed stone aggregate), nominal mix, as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed. |
| 21 | M&L for reinforced cement concrete (1:2:4), type B1 (using 20 mm graded crushed stone aggregate), nominal mix, as in columns, pillars, piers, posts and struts complete all as specified and as directed. |
| 22 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 23 | Ditto all as per serial Item No. 22 described here-in-before but 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders. |
| 24 | M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking plat forms and like in 15mm thick cement mortar as backing coat/ rendering/ screed bed in (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 25 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and as directed. |
| 26 | Ditto all as per serial item No. 9.00 described here-in-before but depth exc 1.5m and n.exc 3.00m. |
| 27 | Use and waste of formwork to sides and soffits of flat rough finished surfaces of concrete of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and as directed. |
| 28 | M&L for reinforced cement concrete (1:2:4), type B1 (using 20 mm graded crushed stone aggregate), nominal mix, as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed. |
| 29 | M&L for brick work with sub class \"B\" old size bricks, straight or curved on plan exceeding 6 m mean radius built in CM (1:6) complete all as specified and directed. |
| 30 | M&L for earth filling under floors or in foundations including watering and consolidation in layers n.exc 25cm thick complete all as specified and directed. |
| 31 | M&L for rolled mild steel as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe 410-W (Gde E- 250) quality-A complete all as specified and directed. |
| 32 | M&L for rolled mild steel as in plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment conforming to Fe 410-W (Gde E- 250) quality-A complete all as specified and directed. |
| 33 | S&F mild steel screw bolts, dia of neck 16 to 20mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 15cm and n exc 22.5cm long complete all as specified and directed. |
| 34 | S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 35 | S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 36 | M&L for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe. 290. Gde-E-165 complete all as specified and directed. |
| 37 | S&F steel rolling shutters, 1.25mm thick laths without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete gear operated type with bevel gear box and crank handle complete all as specified and directed. |
| 38 | S&F safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed. |
| 39 | S&F Ball bearing for rolling shutters complete all as specified and directed. |
| 40 | S&F 20mm thick 2nd class softwood clean sawn boards or planks, width n exc. 25 cm as in eave boards/ wall boarding etc. complete all as specified and directed. |
| 41 | M&L for preparation of new wooden surfaces of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 42 | M&L for rendering 10mm thick in CM (1:4) on fair faces of brickwork or concrete surfaces and rendering is to be finished even and smooth (without using extra lime or cement) complete all as specified and directed. |
| 43 | M&L for rendering 10mm thick in CM (1:6) on fair faces of brickwork or concrete surfaces and rendering is to be finished even and smooth (without using extra lime or cement) complete all as specified and directed. |
| 44 | M&L for preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat of suitable primer complete all as specified and directed. |
| 45 | M&L for broken stone or boulders hardcore of gauge n exc. 63mm, deposited, spread and leveled in layers n exc. 15cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 46 | M&L for 75mm thick PCC (1:3:6), type C-2, (using 40mm graded crushed stone aggregate) as in plinth protection, finished concrete surfaces even and smooth without using extra cement and filling joints with bitumastic filling in proportion bitumen and coarse sand mixture. (1:2) complete all as specified and directed. |
| 47 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed. |
| 48 | M&L for glazed ceramic coloured tiles 450 x 350 x 7 mm thick as in vertical surfaces such as dado, skirting set jointed in neat cement slurry including pointed in white or coloured cement to match with shade of tile over and including 10 mm thick backing coat/ rendering in cement mortar (1:4), complete all as specified and directed. |
| 49 | S&F 6MM thick non asbestos fiber cement designer board / pre-laminated self embossed texture designer board E-Board classic size 600 x 600m, HPSC (High pressure steam cured) to be fixed or inserted to pre laminated GI frame work for seamless ceiling size 600 x 600 mm with main runner 38 x 24 x 0.9 mm thick cross tee 8.6 x 0.9 mm and wall angle 19 x 19 x 0.9 mm duly suspended with 6mm dia GI bar hanger 1200mm centre to center both ways fixed with steel dash fasteners or from purlin from the roof with alignment dip complete as per manufacturer\"s instructions and as directed. |
| 50 | M&L for providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections/ 3 truck and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Chief. |
| 51 | S&F powder coating of any colour (thickness of powder coating not less than 50 micron) Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws, handle, locking arrangement etc. complete all as specified. |
| 52 | S&F powder coating of any colour (thickness of powder coating not less than 50 micron) Anodised aluminium window and ventilator shutters, side hung type without sash bars, or 3 track shutter, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No) hinges type B-21 100mm long (2 Nos) suitable handle (1 No), locking arrangement etc. complete all as specified. |
| 53 | S&F 5.5 mm thick toughened sheet glass selected quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified. |
| 54 | S&F 10mm thick toughened glass as in hinged door, partitions, windows, automatic doors, cut to required shape complete all as directed. |
| 55 | S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples etc complete all as specified and directed. |
| 56 | S&F 12MM thick non asbestos fiber cement designer board / pre-laminated self embossed texture designer board E-Board classic size 600 x 600m, HPSC (High pressure steam cured) to be fixed or inserted to pre laminated GI frame work for seamless ceiling size 600 x 600 mm with main runner 38 x 24 x 0.9 mm thick cross tee 8.6 x 0.9 mm and wall angle 19 x 19 x 0.9 mm duly suspended with 6mm dia GI bar hanger 1200mm centre to center both ways fixed with steel dash fasteners or from purlin from the roof with alignment dip complete as per manufacturer\"s instructions and as directed. |
| 57 | M&L for framed brackets of angles or tees with web and flanges, tubular pipes cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 58 | M&L for 75mm thick PCC (1:4:8), type D2 (using 40mm graded crushed stone aggregates) as in sub base or floors etc. complete all as specified and as directed. |
| 59 | M&L for vitrified ceramic tiles 10 mm thick (square/ rectangular) dark shade, polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with shade of tile laid over and including 15mm thick screed bed or bedding layer in CM (1:6), including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) etc complete all as specified and directed. |
| 60 | S&F 0.63 mm galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with coach screws and washers, in roofs, walls etc with grade of zinc coating 275 complete all as specified and as directed. |
| 61 | S&F 0.63 mm plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 fixed with coach screws and washers complete all as specified. |
| 62 | M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/ litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over any surfaces complete all specified and directed. |
| 63 | M&L for complete removal of existing treatment from old plastered surfaces and applying 2 mm thick wall care white putty to obtain smooth/ even finish using sand paper complete all as specified and directed. |
| 64 | M&L for rubber moulded chequered cement concrete tiles with grey cement cement and pigments of size 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors laid over and including20 mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed. |
| 65 | Demolition of plain cement concrete (un-reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) etc complete all as specified and as directed. |
| 66 | Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc complete all as specified and directed. |
| 67 | Dismantling of plain or corrugated steel sheeting, any gauge thickness, including nanital or similar pattern roof covering complete all as specified and directed. |
| 68 | Taking down copper/ aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed. |
| 69 | M&L for making point wiring system with single runs of PVC insulated FRLS wire, 1100 volt grade with multistranded copper conductor wire of size 1.5 Sqmm (Nominal area) any type any lengthy drawn through in PVC casing capping / PVC conduit of suitable size along with its allconnected fittings accessories including providing of modular type/size of pressed steel terminal sunken boxes or PVC flush type boxand dully fixed it concealed in wall or surface on wall (type of wiring fixing/laying work to be carried out at site as per decided & direction of EIC) and providing alongwith modular type back and face top covered plate frame for housing / mounting of switches sockets, regulators etc and also using /drawn of 1.5 sqmm PVC insulated FRLS wire 1100 Volt grade with multistranded copper conductorwire used as a continuous earth wire which is connected with terminated the box to ceiling rose / fitting complete and including making good to all disturbed surfaces of wall/ceiling, wall panel and floor area of wiring system and to match the existing surface of wall/floor/ceiling etc. for the following complete all as specified and directed :- |
| 70 | One light /fan point controlled by one, one way switch. |
| 71 | One 3/5 pin socket outlet, 5 Amps on same board controlled by one, one way switch |
| 72 | One 3/5 pin socket outlet point, 5 Amps on independent board controlled by one, one way switch |
| 73 | one bell point controlled by one, one way bell switch. |
| 74 | Ditto all as per serial Item No. 69.00 described here-in-before, but using PVC insulated FRLS wire 1100 volt grade with multistranded copper conductor wire of size 2.5 Sqmm for power socket point on independent board point wiring systemand also providing of 2.5 sqmm PVC insulated FRLS wire 1100 volt grade ISI Marked with multistranded copper conductor wire used as a continuous earth wire for power point wiring system complete. |
| 75 | S&F modular switch one way 6 Amps, one module, complete all as specified and directed. |
| 76 | S&F ceiling rose, 3 terminals PVC/ polycarbonate, isolated body complete all as specified and directed. |
| 77 | S&F Modular fan regulator electronic rotary, 0-4 steps stepped type 100 watt 240 volts 50Hz hum free 2 modulewith modular plate and frame complete all as directed. |
| 78 | Supply and fixing LED lights fitting 1x 20W/22W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed. |
| 79 | Supply and fixingrecessed / ceiling concealed mounted flat slim panel square shape with LED luminaries panel type fitting suitable for of size 600 mm x 600 mm of rating capacity in 35W/36 Watt 220 volt AC recessed type with high efficiency PMMA diffuser soft glare free light with driver, holder & LED lamps complete light fitting set all as per existing fitting type/ size of sample /model and make and suitable used for roof ceiling and required fitting use in both warm/white type colour complete setproviding of suitable type of flat flexible two/three core cable and making electric connection complete set including making in additional extra corner cutting work on existing hole of ceiling surface (when if required at site) for setting & fixing of new light fitting complete and also providing of suitable type of flat flexible two/three core cable and making electric connection, complete all as specified and directed. |
| 80 | Supply and fixing LED mirror light fitting with high out put diffuser 2\" long of 10 Watt220 volt AC decorative type with driver holder and LED lamp with having energy efficient type complete light fitting set and including providing of suitable type flat flexible cable for electric connection from ceiling rose to fitting and making electric connection, complete all as specified and directed. |
| 81 | M&L for taking down carefully existing ceilingand removing fan blade and body parts and cleaning all dust and filling cavities with filler material, oiling, greasing including painting fan with blade complete body by applying two coats of synthetic enamel paint and assemble the same alongwith all connecting & fixing accessories such as rubber reel, nut, bolt, washer, lock pin, clamp etc and hanging and refixing the same in position with providing nut, bolt and washer etc and making electric connection complete all as specified and directed. |
| 82 | S&F sheet metal enclosure factory made for DBs single pole and neutral 240 volts 4 way with 200 Amps rated bus bar fixed on wall including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning and making good of wall surfaces complete all as specified and directed. |
| 83 | Supply and fixingMCB SPN 40 to 63 Amps with breaking capacity 10KA \"C\" Curve series, 240 Volts, 50 Hz AC, complete all as specified and directed. |
| 84 | Supply and fixingMCB SP 40 Amps with breaking capacity 10KA \"C\" Curve series, 240 Volts, 50 Hz AC, complete all as specified and directed. |
| 85 | M&L for sub main wiring system with two runs PVC insulated FRLS wire, 1100 volt grade with multistranded copper conductor wire of size2x4 Sqmm and one run of 1x4 Sqmm (Nominal area) (ISI Marked) as in earth wire any type any length drawn through in heavy dutyISI markedPVC Casing capping / PVC conduit of suitable size along with its all fittingsand connected accessories and duly fixed concealed on wall or surface on wall and making good the disturbed wall surface complete all as specified and as directed.Note:- 3 runs of 4sqmm wire and one run of PVC casing capping/conduit shall be measured and 1.0 RM. |
| 86 | Supply and fixing sheet metal enclosure duly powder coated with single pole and neural enclosure with having a two pin and earth plug & top and mounting channel alongwith one 01 MCB SP 20 Amp and dully fixed surface on wall or concealed in wall and making all necessary electrical connection, complete all as specified and directed. |
| 87 | S&F ventilating exhaust fan made out of sturdy engineering plastic body complete with louvers and shutter, 300mm sweep suitable to work on 230 Volts 50 Hz, 1200 RPM, copper winding including making of suitable type /size of hole on wall and fixing complete with nut, bolt etc and making good disturbed surfaces complete all as specified and directed. |
| 88 | S&F electric water heater storage type steel body with inner copper tank and heating element upto 2KW of storage capacity 25 ltr, BEE5 star rating and providing all connecting accessories such as safety valve, thermostat, NRV, connection pieces complete all as specified and directed. |
| 89 | S&F modular type socket 5/6 Amps 220 Volts, 3/5 pin two module complete as specified and directed. |
| 90 | S&F modular type switch 15/16 Amps 220 Volts for one module complete as specified and directed. |
| 91 | S&F modular type socket 15/16 Amps 220 Volts, 5/6 pintwo module complete as specified and directed. |
| 92 | S&F wall mounted fan 400mm sweep single phase230 Volts AC complete with blade and connecting fixing accessories complete all as specified and directed. |
| 93 | S&F ventilating exhaust fan made out of sturdy engineering plastic body complete with louvers and shutter operational of size 250mm sweep suitable to work on 230 Volts 50 Hz, 1200 RPM, copper winding including making of suitable type /size of hole on wall and fixing compete with nut, bolt etc all as specified and directed. |
| 94 | Supply and fixingMCB SP 6 to 32 Amps with breaking capacity 10KA \"C\" Curve series, 240 Volts, 50 Hz AC, complete all as specified and directed. |
| 95 | Supplying and fixing twin core flat/ circular cable of size 10 sqmm 1100 Volts grade, heavy duty cable PVC insulated multistranded aluminium conductor cable served with inner sheathed of PVC tap and overall PVC sheathed and making electric connection, complete all as specified and directed. |
| 96 | Supply and fixing of rigid non metallic PVC conduit of size 15/20/25 mm bore heavy duty with all fitting laid in trenches/ wall including providing clamping arrangement for holding of pipe on wall inproper size of clamps, nut bolt and washer etc., complete all as specified. and directed. |
| 97 | M&L for earthing, complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (Earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.5 mtr below normal ground level connecting to the galvanised iron earth lead wire of 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron and earth strip protected by provision of GI light grade pipe 20 mm bore including provision of concrete pit in PCC (1:2:4) type B-1 using 20mm graded of stone aggregate with XPM (weight not less than 4 Kg/Sqm) and frame of angle iron 25x25x6mm with lugs 02 Nos and with 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate common salt and charcoal filling test point made out of 40mm/6mm flat iron with fixing arrangement funnel wire mesh and earth work in hard dense soil returning filling in and removal of surplus soil to a distance not exceeding 50 mtrs all as per electrical plate No 03 of SSR-2009 Part-I and connecting to earth test point complete all as specified and directed. |
| 98 | S&F Modular bell push 6A one module, complete all as specified and directed. |
| 99 | S&F Buzzer, ding dong, AC, 230 V, Single pole (ISI marked) completedall as specified and directed. |
| 100 | Supply and fixing of sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrangement system suitable ofsize/type of distribution board of rating SPN 8 way type 220 volt AC supply systemwith IP protection rating with ISI marked and having neutral and earth link bus bar and mounting base channel suitable for holding MCBs incomer and outgoingsystem complete set and including dully fixed surface on wall or concealed in wall and making all necessary electrical and also refixing the electric meter and its wiring connection including taking down of existing meter and DB\"s, complete all as specified and directed. |
| 101 | Supplying and fixing twin core flat/ circular cable of size 16 sqmm 1100 Volts grade, heavy duty cable PVC insulated multistranded aluminium conductor cable served with inner sheathed of PVC tap and overall PVC sheathed and making electric connection, complete all as specified and directed. |
| 102 | Ditto all as per serial Item No. 69.00 described here-in-before, but using PVC insulated FRLS wire 1100 volt grade with multistranded copper conductor wire of size 4 Sqmm for power socket point on independent board point wiring systemand also providing of 4 sqmm PVC insulated FRLS wire 1100 volt grade ISI Marked with multistranded copper conductor wire used as a continuous earth wire for power point wiring system complete. |
| 103 | S&F angular/ batten type shape lamp holder with PVC/ Polycarbonate insulated body, alongwith brass adaptor and back plate for housing of bulb complete all as specified and directed. |
| 104 | Supply and fixingrecessed/ceiling concealed mounted down lighter lightfitting of round/Square flat shapes decorative type with high efficiency PMMA diffuser soft glare free light with drivers & LED luminaries of rating capacity in 15W 220 volt AC complete set including making in cutting or additional extra corner cutting work on existing hole of ceiling surface (when if required at site) for setting & fixing of new light fitting complete and also providing of suitable type of flat flexible two/three core cable and making electric connection, complete all as specified and directed |
| 105 | Supply and fixing surface wall mounted decorative wall bracket light fitting with having stainless steel rust free fixture with white glass diffuser alongwith bulb holder based adaptor suitableused for7.5W / 9 W LED filament lamp E27 base system including providing of1N x 9W LED lamp in required fitting use in both warm/white type colour complete light fitting set and complete set and including providing of suitable type of flat flexible two/three core cable and making electric connection, complete all as specified and directed. |
| 106 | Supply and fixingsurface mounted LED decorative type angle adjustable sport light/ bed side study lamp light fitting with lamp in matt finish for premium aesthetics with based of suitable rating capacity 7Watt LED fixture in required fitting use in both warm/white type colour complete light fitting set and including providing of suitable type of flat flexible two/three core cable and making electric connection, complete all as specified and directed. |
| 107 | Supply and fixing surface mounted LED bulk head luminaries lightfitting of rated capacity 10W including LED lamp & driver suitable used for out door type with dust and water proof with energy efficient complete and including providing of suitable type of flat flexible two/three core cable and making electric connection, complete all as specified and directed. |
| 108 | Supply and fixingLED street light fitting of rated capacity 35Watt 230 volt AC with having LED driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection suitable for out door type complete light fitting set including providing of suitable dia of GI bracket and it to as per match/setting the fitting fixture base hole attachment system and including providing of suitable type of flat flexible two/three core cable and making electric connection, complete all as specified and directed. |
| 109 | Supply and fixing sheet metal enclosure duly powder coated with double pole and neural enclosure with having a two pin and earth plug & top and mounting channel alongwith one 01 MCB SPN 20 Amp and dully fixed surface on wall or concealed in wall and making all necessary electrical connection, making good the disturbed surfaces complete all as specified and directed. |
| 110 | Supply and fixing of sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrangement system suitable of size/typefor vertical type distribution boardvertical loadline type of rating VTPN 4 way type 415 volt3 phase AC supply holding system with IP protection rating with ISI marked and having fitted neutral and earth link bus bar and mounting base channels and blanking plates suitable for holding of main MCCB as incomer and out going MCB complete system alongwith providing and mounting in side of DB box of 01 No of MCCB TP 160 Amps with breaking rupting capacity 16 KA and having adjustable setting type and also providing of 08 Nos of MCB SP 63 Amps 10KA \"C\" curve type of the same manufacture make as per of distribution board make complete set and including dully fixed surface on wall or concealed in wall and making all necessary electrical and also refixing the electric meter and its wiring connection including taking down of existing meter and DB\"s, complete all as specified and directed. |
| 111 | Supply and fixing of sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrangement system suitable ofsize/type of distribution board of rating SPN 12 way type 220 volt AC supply systemwith IP protection rating with ISI marked and having neutral and earth link bus bar and mounting base channel suitable for holding MCBs incomer and outgoingsystem complete set and including dully fixed surface on wall or concealed in wall and making all necessary electrical and also refixing the electric meter and its wiring connection including taking down of existing meter and DB\"s, complete all as specified and directed. |
| 112 | M&L for sub main wiring system with two runs PVC insulated FRLS wire, 1100 volt grade with multistranded copper conductor wire of size2x16 Sqmm and one run of 1x16 Sqmm (Nominal area) (ISI Marked) as in earth wire any type any length drawn through in heavy dutyISI markedPVC Casing capping / PVC conduit of suitable size along with its all fittingsand connected accessories and duly fixed concealed on wall or surface on wall and making good the disturbed wall surface complete all as specified and as directed.Note:- 3 runs of 16sqmm wire and one run of PVC casing capping/conduit shall be measured and 1.0 RM. |
| 113 | M&L for sub main wiring system with two runs PVC insulated FRLS wire, 1100 volt grade with multistranded copper conductor wire of size2x10 Sqmm and one run of 1x10 Sqmm (Nominal area) (ISI Marked) as in earth wire any type any length drawn through in heavy dutyISI markedPVC Casing capping / PVC conduit of suitable size along with its all fittingsand connected accessories and duly fixed concealed on wall or surface on wall and making good the disturbed wall surface complete all as specified and as directed.Note:- 3 runs of 10sqmm wire and one run of PVC casing capping/conduit shall be measured and 1.0 RM. |
| 114 | M&L for sub main wiring system with two runs PVC insulated FRLS wire, 1100 volt grade with multistranded copper conductor wire of size2x6 Sqmm and one run of 1x6 Sqmm (Nominal area) (ISI Marked) as in earth wire any type any length drawn through in heavy dutyISI markedPVC Casing capping / PVC conduit of suitable size along with its all fittingsand connected accessories and duly fixed concealed on wall or surface on wall and making good the disturbed wall surface complete all as specified and as directed.Note:- 3 runs of 6sqmm wire and one run of PVC casing capping/conduit shall be measured and 1.0 RM. |
| 115 | Supplying, laying, jointing and testing of LT XLPE cable insulated screened PVC bedded galvanised steel strip or wire armoured electric power cable (heavy duty) with aluminium conductor 1100 volt grade, cross section area of size 70 sqmm 3.5 core laid in trenches or fixing on pole or passing through pipes complete including taking out old unserviceable cable any type any size complete all as specified and directed. |
| 116 | Supplying, laying, jointing and testing of LT XLPE cable insulated screened PVC bedded galvanised steel strip or wire armoured electric power cable (heavy duty) with aluminium conductor 1100 volt grade, cross section area of size 35 sqmm 3.5 core laid in trenches or fixing on pole or passing through pipes complete including taking out old unserviceable cable any type any size complete all as specified and directed. |
| 117 | M&L for dry sand cushioning to under ground cable 8 cm thick before laying and 15 cm thick after laying and stretching the cables complete all as specified and directed.Note :- 1. Dry fine sand of best available quality shall be used. 2. Punned thickness upto 18cm shall only be measured and paid. |
| 118 | M&L for providing of new sub class \"B\" bricks, old size, well burnt laid flat dry for protection of under ground cable complete all as specified and directed. |
| 119 | S&F ventilating exhaust fan made out of sturdy engineering plastic body complete with louvers and shutter operational of size 200mm sweep suitable to work on 230 Volts 50 Hz, 1200 RPM, copper winding including making of suitable type /size of hole on wall and fixing compete with nut, bolt etc all as specified and directed. |
| 120 | S&F ceiling fan 1200mm sweep min air delivery 210CFM with BEE norms 5 star rating of single phase 220 volt AC alongwith blade and down rod and MS fan hook duly fixed in roof area alongwith flat flexible copper wire for electrical connection complete all as specified and directed. |
| 121 | Supply and laying GI pipe 40mm bore medium grade with all fitting laid in trenches/ under road /floor/ pole/ wall for protection of cable including providing clamping arrangement for holding of pipe onpole/wall inproper size of clamps, nut bolt and washer etc complete all as specified and directed. |
| 122 | M&L for earthing, complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (Earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.5 mtr below normal ground level connecting to the galvanised iron earth strip 25x4mm by means of bolts, nuts, check nuts and washers of galvanised iron and earth strip protected by provision of GI light grade pipe 32 mm bore including provision of concrete pit in PCC (1:2:4) type B-1 using 20mm graded of stone aggregate with XPM (weight not less than 4 Kg/Sqm) and frame of angle iron 25x25x6mm with lugs 02 Nos and with 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate common salt and charcoal filling test point made out of 40mm/6mm flat iron with fixing arrangement funnel wire mesh and earth work in hard dense soil returning filling in and removal of surplus soil to a distance not exceeding 50 mtrs all as per electrical plate No 03 of SSR-2009 Part-I and connecting to earth test point complete all as specified and directed. |
| 123 | M&L for taking down carefully existing ceiling fan/ exhaust fan and geyser any type and capacity and after removing fan blade and body parts and cleaning all dust particles and filling cavities with filler material, oiling, greasing including painting fan with blade complete body by applying two coats of synthetic enamel paint on any type of fan with blade and geyser frame and assemble the same alongwith all connecting & fixing accessories such as rubber reel, nut, bolt, washer, lock pin, clamp etc and complete body system as per existing type of colour and after painting work assemble the same along with connecting fixing accessories like rubber rell, nut, bolt, washer, locking pin, clamp etc and hanging and refixing the same in position with providing nut, bolt and washer etc and making electric connection complete all as specified and directed. |
| 124 | S&F GI earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/ pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire complete all as specified and directed. |
| 125 | Supply, installation, testing and commissioning of LT Panel board CPRI approved suitable for 433 Volts, 3 Phase 4 Wire, 50 Hz AC Supply System with IP-65 protection outdoor type platform mounted along with factory made type panel weather proof, vermin proof, fully ventilated and fabricated out of MS CRCA sheet of 2 mm thick having aluminum bus bar of rating 400 Amps current carrying capacity along with providing of CT for all three phase system and all the bus bar are dully fixed upon the insulator base frame and bus bar insulated by coloured heat shrinkable sleeves. The panel shall be front/rear openable and having inner & outer shells. The inner shell duly compartmented for each control gear, including Powder coating internally and externally the entire steel surfaces and provided with suitable locking arrangements including mounted on angle iron stand made out of angle size 40 x 40 x 6 mm for mounting of panel 90cm above ground level grouted in PCC (1:3:6) type C1 (using 20mm graded crushed stone aggregate) including the following controls and suitable size of digital volt meter and digital Ampere meter with CTs and selector switches internal control wiring etc complete all as specified and as directed:-Note:- (i) Excavation and PCC work for foundation of panel shall be included in the quoted rates.(ii) Before procurement of LT panel the drawing for the same shall be got approved from GE. Cost for the same shall deemed to be included in the quoted rates. |
| 126 | Item No. 121.00 contd...(A) INCOMING:- (a) MCCB 250A, 4 pole of breaking capacity 36 kA thermal adjustable setting type - 01 No(b) Panel mounted multi function Volt & Amp meter with selector switches - 01 No(c) CT and RYB LED indicating lamp panel mounting type (Set of three) - 01 set(B) OUTGOING:- (a) MCCB 160A, 4 pole of breaking capacity 16 kA thermal adjustable setting type - 02 Nos (b) MCB SPN 63 Amp-02 Nos (c) On load change over switch 400 Amp-01 No |
| 127 | S&F GI earth continuity earthing strip or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/ pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 25x4mm galvanised iron steel strip complete all as specified and directed. |
| 128 | Notes :-An amount of Rs. 22,074.00 on account of Credit Schedule for Schedule \"A\" Part-II shall be deducted from total quoted amount of BOQ to arrive at the contract sum. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
