Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Cutting in earth work in by mechanical means all heights and depths in all kinds of soils, including saturated soils comprising of pick work , Jumper work and blasting workboth in soft and hard rock with chiseling and wedging out of rock (Where blasting is prohibited) and their intermediate classificationof soil including, dewatring where required, setting out to required lines, levels as shown on the drawing and directed by the Engineer-in - charge at site,according to the HP.PWD. specification of 1990( One Thousand Nine Hundred ninety) Volume-I (One)and sorting out useful and unuseful matreial and Transportation of the unuseful matreial for disposing at dumping site ( To be arranged by the Contractor) as per satisfacation of Engineer -in- Charge through all modes of transportationincluding head load , animal load or mechnical means along with its leveling fine dressing and with all kinds of labour, machineries, tools equipments and safety measures and incidentals necessary to complete the workby mechnical means and labour( If required). All useful material such as stone , shingles aggregate and slates Shall be properly Stacked at site to the maximum possible extent in all leads and lifts through all modes of transportation as per direction of the Engineer -in -charge . The recoveryfor stones, weather useful or not, forthe minimum quatom of22.50 cubic meter @ Rupee 300/- Only (Rupees. Three hundred) per cubic meter Shall be effected on pro rata basis in allcircumstances. Any loss to the public and private property during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have tobe duly compensated by him in all respects including all incidental charges. |
| 2 | Excavation in drain and channel in earth work in all heights and depths in all kinds of soils, including saturated soils comprising of pick work, jumper work and blasting work both in soft and hard rock with chiseling and wedging out of rock (where blasting is prohibited) and their intermediate classification of soils including, dewatering wherever required, setting out to required lines, levels as shown on the drawing and directed by the engineer -in-charge at site., according to the HP.PWD. specification of 1990 (one thousand nine hundred ninety) volume-I (one) and sorting out useful and unuseful material and transportation of the unuseful material for disposing off todumping site (To be arranged by the contractor) as per satisfaction of Engineer- in -charge through all modes of transportation including head load ,animal load or mechanical means along with its leveling fine dressing and with all kinds of labour, machineries, tools equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour ( if required ). All useful material such as stones, shingles aggregate and slates shall be properly stacked at site to the maximum possible extent in all leads and lifts through all modes of transportation and used /removed as per the direction of the Engineer - in- charge. Any loss to the public and private propriety during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects including all incidental charges. |
| 3 | Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drainsincluding dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out theexcavated soil and disposal of surplus excavated soils as directedby Engineer-incharge and disposing of all excavated earth at dumping site ( To be arranged by the Contractor) as per satisfacation of Engineer -in- Charge through all modes of transportationincluding head load , animal load or mechnical means along with its leveling fine dressing and with all kinds of labour, machineries, tools equipments and safety measures and incidentals necessary to complete the workby mechnical means and labour( If required). All useful material such as stone , shingles aggregate and slates Shall be properly Stacked at site to the maximum possible extent in all leads and lifts through all modes of transportation as per direction of the Engineer -in -charge . Any loss to the public and private property during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have tobe duly compensated by him in all respects including all incidental charges. |
| 4 | Filling in plinth with sand under floors including watering, ramming consolidating and dressing complete as per HPPWD specification or as directed by Engineer-in-Charge, including carriage of materials with in all leads, lifts and other incidental. The rate including Royality, Malkhana, Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government. |
| 5 | Providingform work with steel plates 3.15mm(threepoint one fivemillimeters) thick,welded with angle iron in frame30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finishincluding centering ,shuttering, strutting andpropping etceterawith wooden battens and ballies, height of propping and centering in all heights belowsupporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete workin foundation, footing, basis of column etcetra . and massconcrete complete as per HP.PWD.Specifications, approved drawings, designsand entire satisfactionand directions of the Engineer-in-chargeincluding carriage of materialswithin all leads and liftsand other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government |
| 6 | Providingform work with steel plates 3.15mm(threepoint one fivemillimeters) thick,welded with angle iron in frame30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finishincluding centering ,shuttering, strutting andpropping etceterawith wooden battens and ballies, height of propping and centering in all heights belowsupporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete workin Flat surfcaes such as soffits of suspended floor, roofs, landings and the like, floors etc. upto 200 mm in thickness complete as per HP.PWD.Specifications, approved drawings, designsand entire satisfactionand directions of the Engineer-in-chargeincluding carriage of materialswithin all leads and liftsand other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government |
| 7 | Providingform work with steel plates 3.15mm(threepoint one fivemillimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finishincluding centering ,shuttering, strutting andpropping etceterawith wooden battens and ballies, height of propping and centering in all heights belowsupporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in Columns, pillars post and struts (square rectangular or polygonal in plain in any heights / thickness/depths etcetera upto all foor level as per HP.PWD.Specifications, approved drawings, designsand entire satisfactionand directions of the Engineer-in-chargeincluding carriage of materialswithin all leads and liftsand other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government |
| 8 | Providingform work with steel plates 3.15mm(threepoint one fivemillimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finishincluding centering ,shuttering, strutting andpropping etceterawith wooden battens and ballies, height of propping and centering in all heights belowsupporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in Beams, cantilevers, girders and lintels, sides of soffits of beams, beams haunchings, girders, cantilevers, bressumers and lintels uptoanydepth /heights upto all floor levelas per HP.PWD.Specifications, approved drawings, designsand entire satisfactionand directions of the Engineer-in-charge including carriage of materialswithin all leads and liftsand other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government |
| 9 | Providingform work with steel plates 3.15mm(threepoint one fivemillimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finishincluding centering ,shuttering, strutting andpropping etceterawith wooden battens and ballies, height of propping and centering in all heights belowsupporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in edges of slabs and break in floors and walls under 20 cm thickness as per HP.PWD.Specifications, approved drawings, designsand entire satisfactionand directions of the Engineer-in-charge including carriage of materialswithin all leads and liftsand other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government |
| 10 | Providingform work with steel plates 3.15mm(threepoint one fivemillimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finishincluding centering ,shuttering, strutting andpropping etceterawith wooden battens and ballies, height of propping and centering in all heights belowsupporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in stair cases with sloping or stepped soffits excluding landings as per HP.PWD.Specifications, approved drawings, designsand entire satisfactionand directions of the Engineer-in-charge including carriage of materialswithin all leads and liftsand other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government |
| 11 | Providing and laying cement concrete 1:1.5:3 (one cement into one point five sand into three crushedstone aggregate 20mm. (Twenty millimeter) nominal size) mechanically mixed and vibrated, curing completeexcluding cost of form work and reinforcement for reinforced concrete work and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plantthrough all modes of transportion within all leads and liftsand as per direction of Engineer-in- Charge in Foundation, footings bases of columns etc. and mass concrete.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. |
| 12 | Providing and laying cement concrete 1:1.5:3 (one cement into one point five sand into three crushedstone aggregate 20mm. (Twenty millimeter) nominal size) mechanically mixed and vibrated, curing completeexcluding cost of form work and reinforcement for reinforced concrete work and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plantthrough all modes of transportion within all leads and liftsand as per direction of Engineer-in- Charge in suspended floors roofs, landings and shelves and their supports, balconies, beams, girders, bressumers and cantilevers upto floor all level. The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. |
| 13 | Providing and laying cement concrete 1:1.5:3 (one cement into one point five sand into three crushedstone aggregate 20mm. (Twenty millimeter) nominal size) mechanically mixed and vibrated, curing completeexcluding cost of form work and reinforcement for reinforced concrete work and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plantthrough all modes of transportion within all leads and liftsand as per direction of Engineer-in- Charge in columns, pillars, posts and struts. Square, rectangular or polygonal in plan,in all floor level in all heights.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. |
| 14 | Providing and laying cement concrete 1:3:6 (One cement: three sand :six graded cursed/broken stone aggregate 40mm) (forty millimeters nominal size) mechanically mixed and curing complete, excluding cost of form work in foundation and plinth including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge. |
| 15 | Providing and laying cement concrete 1:4:8 (One cement: Four sand :Eight graded cursed/broken stone aggregate 40mm) (forty millimeters nominal size) mechanically mixed and curing complete, excluding cost of form work in foundation and plinth including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge. |
| 16 | Providing and laying Tor steel reinforcement of TATA, sail , Rashtriya Ispat or its substantial equivalent makefor Reinforced Cement Concrete work including bending, binding and placing in position complete including cost of binding wire and other incidentals due for its completion up to allfloor level complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Malkhana, Royality, Octroi, GST, toll tax or any taxes imposed by the Government. |
| 17 | Providing and laying Second class Brick workin super structure above plinth level uptoall floor level: Cement mortar 1:6 (1 cement : 6 Coarse sand) as per Specifications, approved drawings, designsand entire satisfactionand directions of the Engineer-in-chargeincluding carriage of materialswithin all leads and liftsand other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government . |
| 18 | Stone soling tightly hand packed under floors, including watering, ramming and consolidating completeand carriage of materials, labour ,tool and plantsthrough all modes of transportation with in all leads and lifts, as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plantthrough all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.The rate including of octory, royalty, malkana, toll tax, sal tax or other taxes imposed by goverment. |
| 19 | Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for frames of doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and as per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. |
| 20 | Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge as per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. |
| 21 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm) complete as per the architectural drawings and the directions of engineer-in-charge as per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. |
| 22 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per the architectural drawings and the directions of engineer-in-charge as per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government.a) Pre-laminated particle board with decorative lamination on both sides |
| 23 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.as per the architectural drawings and the directions of engineer-in-charge : The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. |
| 24 | Providing & fixing fly proof with Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete,as per approved drawing, design and as directed by the Engineer-in-Chargeas per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government |
| 25 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. completeas per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. : (a) 300x 16 mm |
| 26 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. completeas per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. a)250x10mm |
| 27 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. completeas per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. a)200x10mm |
| 28 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. completeas per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government.a) 125 mm |
| 29 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. completeas per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government.a) 100 mm |
| 30 | Providing and fixing 150mm(one hundred fifty milimeter MS hooks and Eyeswith necessary screws etc. complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.`The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government |
| 31 | Providing and laying Kota stone (Table rubbed and polished) slab 25mm(twenty five milimeter)thick mirror polished of slab size not less than 550mmx550mm(five hundred fifty into five hundred fifty milimeter) inflooringwith20mm (twenty milimetre ) thick base of cementmortor 1:4 (onecement is to four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment. |
| 32 | Providing and laying Kota stone (Table rubbed and polished) slab 25mm(twenty five milimeter)thick mirror polishedin risers of steps, skirting dado and pillars laid on 12mm(twelve milimeter) (average) thick cement mortar 1:3(one cement:three sand) and jointed with grey cement slurry fixed with pigment to match the shade of the slabs including rubbing and polishing completeas per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidential charges. The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment. |
| 33 | Providing and laying Duro stone vetrified tiles (300x300mmx10mm(three hundred into three hundred into ten milimeter) in grey/coloured or of approved shade in flooring, treads of steps and landing laid on a bed of 12mm(twelve milimeter) thick cement mortar 1:3 (one cement : three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges. The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment. The size shown in inicative and Engineer-in-charge decision /approval will be final. |
| 34 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government.a) 600x600mm. The size shown in inicative and Engineer-in-charge decision /approval will be final. |
| 35 | 15 (Fifteen) millimeters thick cement plaster in single coat on the rough side of brick/concrete/ stone walls for interior plastering up to all heights including arises. Internal rounded angles, chamfers and/or rounded angles not exceeding 80 (Eighty) millimeters in girth and finished even and smooth in cement mortar 1:3(One cement: Three sand)as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. |
| 36 | Providing 15 mm cement plaster in single coat on fair side of brick/concrete walls for internal /external plastering in all floor level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar 1:6 (One cement : Six sand) including carriage of materialsthrough all modes of transportations with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. |
| 37 | 6mm (six millimeter) thick cement plaster to ceiling with cementmortar 1:3 (one cement is to three sand),upto all floor level complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government. |
| 38 | Steel work welded in built up sections/hollow sections etc.framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works as per approved drawing, design and as directed by the Engineer-in-Chargeas per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government |
| 39 | Providing and fixing moulded hand rail of M.S hollow pipe 50 mm ( fifty milimeter) dia weleded in straight length over MS flat at top of vertical balustars including one coat of red oxide priming coat complete ( M.S flat and balusters of railing shal be measured & paid for separately) and as per approved drawing, design and as directed by the Engineer-in-Chargeas per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government |
| 40 | Applying birla wall putty putty two coats over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matt finish to the surface complete as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government |
| 41 | Applying priming coat on new concrete/masonry/asbestos cement/plastered surfaces after and including preparing the surface by thoroughly cleaning oil,grease,dirt and other foreign matter and sand papering as required with Readymixed primer finish to the surface complete as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government |
| 42 | Painting two coats(excluding priming coat on new concrete masonry/plaster surfaces with readymixed paint brushing for use on floors to give an even shadeincluding cleaning the surface of all dirt,dust and other foreignmatter and sand papering as required with paint other then white finish to the surface complete as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government |
| 43 | Applying priming coat over new steel & other metal surfaces after & including preparing the surface by thoroughly cleaning oil grease dirt and other foreign matter and scoured with wire brushes fine steel wool scrapers and sand paper complete. With ready mixed priming paint brushing red lead,Red-oxide/zinc oxide chrome.finish to the surface complete as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government |
| 44 | Painting two costs (excluding priming cost on new steel and other metal surfaces with enamel paintwhite brushing to give an even shade including cleaning the surface of all dirt,dust and other foregin matter paint complete as per HP.PWD., Specifications of 1990 volume-I includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. |
| 45 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. (80x1.20 mm M.S. laths with 1.20 mm thick top cover) complete as per the architectural drawings and the directions of engineer-in-charge as per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. |
| 46 | Providing and laying cement concrete 1:3:6 (One cement: three sand : Six graded cursed/broken stone aggregate 40mm) (forty millimeters nominal size) mechanically mixed and curing complete, excluding cost of form work in foundation and plinth including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge. |
| 47 | Providing and laying 40mm (forty millimeters) thick Cement concrete flooring 1:2:4 (one cement; two sand; four graded broken/ crushed stone aggregate 20mm (twenty millimeters) nominal size ) laid in one layer finished with a floating coat of neat cement upto all floor level and curing complete as per HP.PWD.Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government |
| 48 | 2nd class Half brick masonry in common burnt clay building bricks in super-structure above plinth level upto floor all levels in Cement Mortar 1:4 1 cement : 4 sand),including carriage of material within all leads and lifts as per direction of Engineer-in-charge as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment. |
| 49 | WATER SUPPLY AND SANITORY INSTALLATION WORK:-Providing and fixingto wall ceiling and floor galvanized mild steel tubes (medium grade)of Jindal (Hissar) or equivalent make with fiitings and clamps including making good the wall, ceiling andfloor15mm nominal bore, within all leads, lifts of materials and other incidentals as per approved drawing design and as directed by the Engineer-in-Charge. |
| 50 | Providing and fixingto wall ceiling and floor galvanized mild steel tubes (medium grade)of Jindal (Hissar) or equivalent make with fiitings and clamps including making good the wall, ceiling andfloor 20mm nominal bore, within all leads, lifts of materials and other incidentals as per approved drawing design and as directed by the Engineer-in-Charge. |
| 51 | Providing and laying in trenches, galvanised mild steel tubes (medium grade) of Jindal (Hissar) or equivalent make, tube fittings (earth work in trenches to be measured and paid separately) including carriage of materialsthrough all modes of transportations with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge.a) 15 mm nominal bore |
| 52 | Providing and laying in trenches, galvanised mild steel tubes (medium grade) of Jindal (Hissar) or equivalent make, tube fittings (earth work in trenches to be measured and paid separately) including carriage of materialsthrough all modes of transportations with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge.a) 20 mm nominal bore |
| 53 | Making connection of galvanised steel distribution branch with galvanised mild steel main 20mm to 40mm nominal bore by providing and fixing tee including cutting and threading the pipes complete including carriage of materialsthrough all modes of transportations with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge. |
| 54 | Providing and fixing PVC 2000 litres net capacity water storage tank of ISI : 12701 marked, G.I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level including carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. |
| 55 | Fixing water meter stop-cock 15mm nominal bore in galvanised mild steel tube including necessary fittings such as mild steel galvanised jam nut, sockets, etc. cutting and making long screws complete (water metre and stop-cock to be measured and paid for separately)complete including carriage of materialsthrough all modes of transportations with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge. |
| 56 | Providing and fixing PVC Supreme or its equivalent, waste and ventilating pipes jointed properly with solution approved adhesivecompleteper HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government . (a) 110 (One hundred ten) millimetres nominal size. |
| 57 | Providing and fixing PVC Supreme or its equivalent, waste and ventilating pipes jointed properly with solution approved adhesivecompleteper HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government . (a) 150 (One hundred ten) millimetres nominal size. |
| 58 | Providing and fixing PVC Supreme or its equivalent, waste and ventilating pipes jointed properly with solution approved adhesive completeper HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government . (a) 75 (seventy fivemillimetres nominal size. |
| 59 | Providing and fixing PVC holder bat clamps of approved design PVC pipes embedded in and including cement concrete blocks 10*10*10cm (ten into ten into ten centimeter) of 1:2:4 (one cement isto two sand isto four graded stone aggregate 20mm (twenty millimeter) nominal size) and cost of cutting holes and making good the wall etc. completeper HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government . (a) 110 (One hundred ten) millimetres nominal size. |
| 60 | Providing and fixing PVC holder bat clamps of approved design PVC pipes embedded in and including cement concrete blocks 10*10*10cm (ten into ten into ten centimeter) of 1:2:4 (one cement isto two sand isto four graded stone aggregate 20mm (twenty millimeter) nominal size) and cost of cutting holes and making good the wall etc.per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government (a) 150 (One hundred fifty) millimetres nominal size. |
| 61 | Providing and fixing PVC ISI marked floor traps of self-cleaning design including fixing with approved adhesive complete including cost of cutting and making good the walls and the floors:per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government (a) 110x 90 mm(one hundred ten into ninety) milimeter. |
| 62 | Providing and fixingPVC single equal branch with oval access door , ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc.per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government (a) 75 (Seventy five) millimetres nominal size. |
| 63 | Providing and fixingPVC single equal branch with oval access door , ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc.per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government (a) 110 (One Hundred ten) millimetres nominal size. |
| 64 | Providing and fixingPVC door bend with oval acces door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. completeper HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government (a) 110 mm dia |
| 65 | Providing and fixingPVC door bend with oval acces door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. completeper HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government (a) 75 mm dia |
| 66 | Providing and fixingPVC single equal branch plain ISI marked including fixing with approved adhesive etc. completeper HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government (a) 110 mm dia |
| 67 | Providing and fixingPVC single equal branch plain ISI marked including fixing with approved adhesive etc. completeper HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government (a) 75 mm dia |
| 68 | Providing and fixingPVC collars ISI marked including fixing with approved adhesive etc. completeper HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government (a) 110 mm dia |
| 69 | Providing and fixingPVC collars ISI marked including fixing with approved adhesive etc. completeper HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government (a) 75 mm dia |
| 70 | Providing and fixingPVC plain bendISI marked including fixing with approved adhesive etc. completeper HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government (a) 110 mm dia |
| 71 | Providing and fixingPVC plain bendISI marked including fixing with approved adhesive etc. completeper HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government (a) 75 mm dia |
| 72 | Providing and fixingPVC \"P\" or \"S\" trap for water closet ( squatting pan)ISI marked including jointingthe trap with the pan and PVC pipe with approved adhesive etc. completeper HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government (a) 110 mm dia |
| 73 | Providing and fixing PVC cowl including carriage of materialsper HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government (a) 110 mm dia |
| 74 | Providing and fixing PVC cowl including carriage of materialsper HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government (a) 75 mm dia |
| 75 | Providing and fixingviterous China wash, down water closet (European Type W.C. pan) with integral \"P\" or \"S\" trap including jointing the trap with soil pipe in cement mortar 1:1 (1 cement : 1 sand) seat and coveto be paid for separately.per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government (a) Anglo Indian of Hindware or its equivalent |
| 76 | Providing and fixing 10.00 ltr.capacityPVC low levelduel flushing cistern CERA catlogue No. 2603 or equivalenetwith a pair ofbrackets with fittings such as lead valve, less syphon, 15mm nominal size PVCball valve with polythene float, PVC handle, union and coupling for connection with inlet, outlet and overflow pipes 40 mm dia PVC flush bend with cistern and closet & over flow pipe to be paid for separately)per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government |
| 77 | Providing and fixing plastic seat (Solid/Hollow type) and cover for wash down water closet with C.P. brass hinges and rubber buffers per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government (i) Solid Type :- (a) White plastic seat and cover :- |
| 78 | Providing and fixing first quality of white shadeviterous China bowl pattern urinal including connecting the urinal with waste pipe by means of white lead mixed with chopped hemp(waste pipe to be measured and paid for separately)per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government (a) Flat back type (430mm x 260mmx 350mm)of hindware |
| 79 | Providing and fixingautomatic flushing cistern with a pair of C.I. or M.S. bracket complete with a pair of C.I. or M.S. bracket complete with fittings including C.I. syphonic apparatus, mosquito proof lid, C.P. brass union and coupling for connections with inlet, outlet and over flow pipes including cutting holes and making good the same ( over floe pipe to be measured and paid for separately) per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government (i) Vitreous china of Hindware or its eqivalent make .(a) 5 litres capacity. |
| 80 | Providing and fixingC.P. brass flush pipe / spraders for urinal with fittings such as unions, clamps etc.( all C.P.) including cutting holes and making good the same.per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government (a) 15 mm nominal bore. |
| 81 | Providing and fixing division plate for urinal of white shade Hind ware Cera or its equivalent 600*300 (Six hundred into Three hundred) millimeter’s size for urinal, as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. |
| 82 | Providing and fixingviterous China wash basin of Hindware Cat No. 10001 or equivalent with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittingper HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government (i) Flat back :-(a) 550 X 400 mm |
| 83 | Providing and fixing rubber plug for wash basinper HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government .(a) 32 mm dia |
| 84 | Providing and fixing Hindware Vitreous China padestal for wash basin complete recessed at the back for receiption pipe anf fittings.per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government |
| 85 | Providing and fixing C.P. brass waste (heavy duty ISI marked IS:8931 & 8934) for wash basin or sinkper HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government :-(a) 32 mm dia |
| 86 | Providing and fixing MI union for wash basin or sink as per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government(a) 32 mm dia |
| 87 | P/F 32 mm dia lead waste pipe for wash basinas per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government |
| 88 | P/F CP bottle trap for wash basin 32 mm diaas per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government |
| 89 | Providing & fixing 100mm dia C.P. grating for floor or nahani/gully/floor trap as per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government |
| 90 | Providing and fixing 600mmx450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C. sheet or ply wood sheet and fixed to wooden plugs with C.P. brass screws and washeras per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government |
| 91 | Providing and fixing 600mmx120 mm glass shelf with C .P brass and guard rail complete, fixed to wooden plugs withC. P brass screw as per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government |
| 92 | Providing and fixing toilet paper holder including carriage of materialsas per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government :-(a) C.P. brass :- |
| 93 | Providing and fixing C.P. brass towel rail (heavy duty ISI marked IS : 8931 and 8934) complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws as per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government :-600 X 20 mm |
| 94 | Providing and fixing charomium plated brass soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screws as per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government |
| 95 | Providing and fixing CP brass bib tap(heavy duty ISI marked IS:8931 & 8934) of jaquar with capstan head as per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government :-15 mm dia |
| 96 | Providing and fixing CP brass pillar tap of jaquar with capstan head (heavy duty ISI marked IS:8931 & 8934)as per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government :-15 mm dia |
| 97 | Providing and fixingC.P.brassangle valve of jaquar(heavy duty ISI marked IS:8931 & 8934)as per HP.PWD., Specificationsincluding carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government :-15 mm dia |
| 98 | Providing and fixing PVCconnection pipe (heavy duty ISI marked IS:8931 & 8934) with brass union as per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government :-45 cm length --15 mm dia |
| 99 | Providing and fixing brass full way valve with wheel as per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government :-20 mm nominal bore |
| 100 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved/ directed by the Engineer-in-Charge as per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government |
| 101 | Constructing manhole with R.C.C. top slab in 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 ( icement ; 4 sand : 8 graded stone aggregate 40 mm nomonal size), inside plastering 15mm thick with cement mortar 1:3 (1 cement : 3 sand) and finished with floating coat of neat cement and making channels in cement concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished smooth complete including curing and testing including carriage of materialsthrough all modes of transportations with in all leads and lifts and as per HP.PWD specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads lifts and all incidental charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. a) Inside size 800mm x800mm and 500 mm deep including man hole cover size C.I cover with frame. ( LIght duty single seal pattern -1) 455 mmx610mm internal dimensions total weight of cover and frame to be not less than 38kg.(Weight of cover 23 kg and weight of frmae 15 kg .)b) With 200mm thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3 (1 cement : 3 includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government |
| 102 | Providing and fixingin position pre cast RCC manhole cover and frame complete of cemocrate make or its equivalent make including all lead/liftsa)600x450mm |
| 103 | Providing and fixingin position pre cast RCC manhole cover and frame complete of cemocrate make or its equivalent make including all lead/liftsa)300x300mm |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
