|
| 1 | Removing of unserviceable/broken wooden members of chair dining and supply and fixing new members/parts of sizes mentioned in Drg, made out of first classs hard wood (Indian Teak wood) fixing of joints with glue and bamboo pins all as per drawing No FD-228/16/279 / FD/MAP-II/05 and as specified and directed for Front leg with suitable PVC Shoe |
| 2 | -Ditto- all as per Ser No 1 but for Rear leg with suitable PVC shoe |
| 3 | -Ditto- all as per Ser No 1 but forSide rails |
| 4 | -Ditto- all as per Ser No 1 but for Front Rail |
| 5 | -Ditto- all as per Ser No 1 but for Rear Rail |
| 6 | -Ditto- all as per Ser No 1 but for Back patti |
| 7 | -Ditto- all as per Ser No 1 but forStiffner |
| 8 | -Ditto- all as per Ser No 1 but for chair easy drawing No FD-229/17 and for Front leg with suitable PVC shoes. |
| 9 | -Ditto- all as per Ser No 1 butfor chair easydrawing No FD-229/17 and Rear leg with suitable PVC shoe |
| 10 | -Ditto- all as per Ser No 1 butfor chair easy drawing No FD-229/17 andforArms rest |
| 11 | -Ditto- all as per Ser No 1 butfor chair easy drawing No FD-229/17 andfor Front / Rear Frame of seat / back |
| 12 | -Ditto- all as per Ser No 1but for chair easydrawing No FD-229/17 and forSide Frame of seat / back |
| 13 | -Ditto- all as per Ser No 1 butfor chair easydrawing No FD-229/17and for Front/Rear rail under neath the seat seat frame |
| 14 | -Ditto- all as per Ser No 1 butfor chair writingdrawing No FD-250/280/20 and for Front leg with suitable PVC Shoe |
| 15 | -Ditto- all as per Ser No 1 butfor chair writing drawing No FD-250/280/20 andfor Front Rail |
| 16 | -Ditto- all as per Ser No 1 butfor chair writingdrawing No FD-250/280/20 andfor Rear Rail |
| 17 | -Ditto- all as per Ser No 1 butfor chair writingdrawing No FD-250/280/20 andforSide Rail |
| 18 | -Ditto- all as per Ser No 1 butfor chair writing drawing No FD-250/280/20 andfor Arms Rest |
| 19 | -Ditto- all as per Ser No 1 but for chair writing drawing No FD-250/280/20 andforStiffner |
| 20 | Removing the existing unserviceable Plywood top, from Charpoy IP hard top supply and fix new top made out of 12 mm thick commercial plywood BWR grade with ISI mark Make:National/Kitply/Greenply with suitable screws as directed by Engineer-in-charge, inclding all steel surface shall be painted by one coat of synthetic enamel paint over a coatof red oxiedprimer by sprayer paintmake shall be Apcolite Asian Paints. Colour as directed by Engr-in-charge. |
| 21 | Removing the existing unserviceable Plywood top, from Bed hard with ply top supply and fix new top made out of 12 mm thick commercial plywood BWR grade with ISI mark Make:National/Kitply/Greenply with suitable screws as directed by Engineer-in-charge, inclding all steel surface shall be painted by one coat of synthetic enamel paint over a coatof red oxiedprimer by sprayer paintmake shall be Apcolite Asian Paints. Colour as directed by Engr-in-charge. |
| 22 | Removing the existing unserviceable head board & foot board from Bed Hard steel supply and fix new head board & foot board made out of 18mm thick prelaminated melamine faced particle board both sides decorative as IS-12823, exterior grade, Gde-I,type-II duly fitted with PVC edging (not less than 4mm thick as directed by Engr-in-charge. |
| 23 | Removing the existing unserviceable plywood top, fromCharpoy folding IP with hard top supply and fix new top made out of 12 mm thick commercial plywood BWR grade with ISI mark Make:National/Kitply/Greenply with suitable screws as directed by Engineer-in-charge, inclding all steel surface shall be painted by one coat of synthetic enamel paint over a coatof red oxiedprimer by sprayer paintmake shall be Apcolite Asian Paints. Colour as directed by Engr-in-charge. |
| 24 | Removing of unserviceable locks with keys and supply and fixing new MS locks of size 50 mm 6 levers with stainless steel keys in duplicate of almirah large/mediumsteel all as shown on drawings, as specified and directed by Engr-in-charge. |
| 25 | Removing unserviceable legs of almirah steel medium and supply and fixing new one made out of 16 guage MS black sheet & welding all as shown as drawings, as specified & directed by Engr-in-charge. |
| 26 | Removing unserviceable legs of almirah steel large and supply and fixing new one made out of 16 guage MS black sheet & welding all as shown as drawings, as specified & directed by Engr-in-charge. |
| 27 | Removing unserviceable steel handle and supply and fixing new steel chromium plated handle for almirah large/medium steel all as per drawings as specified and directed by Engr-in-charge. |
| 28 | Removing unserviceable three way locking devices from almirah large steel and supply & fixing new one made out of 8 mm round bars including painting with two coats of synthetic enamel paint over a coat of primer all as per drawing as specified and directed by Engr-in-charge. |
| 29 | Removing unserviceable three way locking devices from almirah medium steel and supply & fixing new one made out of 8 mm round bars including painting with two coats of synthetic enamel paint over a coat of primer all as per drawing as specified and directed by Engr-in-charge. |
| 30 | Removing of unserviceable drawers lock and supply and fix Godrej Lock 50mm, 6 lever of table office clerk/officer steel, complete alongwith duplicate key all as specified and directed by Engr-in-charge. |
| 31 | Removing old unserviceable top of table office clerk steel of size 1220 x 710mm and S&F new table top of 18 mm thick table top of prelaminated particle board with 20mm x 5mm thick teakwood beading all over the frames as per drawings and as specified and directed by Engr-in-charge. |
| 32 | Removing of unserviceable drawer supports of table office clk steel/Offr steel and providing new drawer support duly welded and making the drawer sliding smooth functioning all as specified and directed by Engr-in-charge. |
| 33 | Removing of drawers from table office clerk/officer steel and resetting with alignment after removing of dent and making drawers smooth functioning with greasing(Drg No FD- 84/1003). |
| 34 | Removing of unserviceable/broken top, tightening the loose frame by glue and bamboo pins and providing new top made out of 18/19 mm prelaminated partical board one side teak veneer exterior grade conforming to relevant IS with 4 mm thick Teak wood beading duly polished size 1500 X 900 mm of Table dining 6/8 persons. (Make - Novapan) (Drg No FD -239/30) |
| 35 | Removing unserviceable/broken legs and providing new leg made out of first classs hard wood (Indian Teak wood) for table dining for 6/8 persons all as shown on drawings, as specified & directed (Drg No FD -239/30). |
| 36 | Removing unserviceable/broken top long rail and providing new long rail made out of first classs hard wood (Indian Teak wood) for table dining for 6/8 persons all as shown on drawings, as specified & directed (Drg No FD -239/30). |
| 37 | Removing unserviceable/broken top short rail and providing new short rail made out of first classs hard wood (Indian Teak wood) for table dining for 6/8 persons all as shown on drawings, as specified & directed (Drg No FD -239/30). |
| 38 | Removing of unserviceable/broken top, tightening the loose frame by glue and bamboo pins and providing new top made out of 18/19 mm prelaminated partical board one side teak veneer exterior grade conforming to relevant IS with 4 mm thick Teak wood beading duly polished size 1500 X 900 mm of Table dining 4 persons (1200 x 900 mm). (Make - Novapan) (Drg No FD/MAP-II/03) |
| 39 | Removing unserviceable/broken legs and providing new leg made out of first classs hard wood (Indian Teak wood) for Table dining 4 persons (1200 x 900 mm) all as shown on drawings, as specified & directed (Drg No- ( FD/MAP-II/03). |
| 40 | Removing unserviceable/broken top long rail and providing new long rail made out of first classs hard wood (Indian Teak wood) for Table dining 4 persons (1200 x 900 mm) all as shown on drawings, as specified & directed (Drg No FD/MAP-II/03). |
| 41 | Removing unserviceable/broken top short rail and providing new short rail made out of first classs hard wood (Indian Teak wood) for Table dining 4 persons (1200 x 900 mm) all as shown on drawings, as specified & directed (Drg No FD/MAP-II/03). |
| 42 | Removing of unserviceable/broken top, tightening the loose frame by glue and bamboo pins and providing new top made out of 18/19 mm prelaminated partical board one side teak veneer exterior grade conforming to relevant IS with 4 mm thick Teak wood beading duly polished size 900 X 600 mm of Table 900 x600 mm with & without drawer. (Make - Novapan) (Drg No FD -224/231) |
| 43 | Removing unserviceable/broken legs and providing new leg made out of first classs hard wood (Indian teak wood) for Table 900 X 600 mm with & without drawer all as shown on drawings, as specified & directed (Drg No FD -231/224). |
| 44 | Removing of unsv plywood of drawers of table 3\"x2\" with drawers and supply and fixing new ply 6 mm commerical BWR grade to the table 3\"x2\" with drawers. All as specified and directed.(Drg No FD -224). |
| 45 | Removing unserviceable/broken top long rail and providing new long rail made out of first classs hard wood (Indian Teak wood) for Table 900 X 600 mm with & without drawer all as shown on drawings, as specified & directed (Drg No FD -224/231). |
| 46 | Removing unserviceable/broken top short rail and providing new short rail made out of first classs hard wood (Indian Teak wood) for Table 900 X 600 mm with & without drawer all as shown on drawings, as specified & directed (Drg No FD -224/231). |
| 47 | Removing of unserviceable/broken top, tightening the loose frame by glue and bamboo pins and providing new top made out of 18/19 mm prelaminated partical board one side teak veneer exterior grade conforming to relevant IS with 4 mm thick Teak wood beading duly polished for teapoy.(Make - Novapan) (Drg No FD -232/34(M)/278. |
| 48 | Removing unserviceable/broken legs and providing new leg made out of first classs hard wood (Indian teak wood) for teapoy all as shown on drawings, as specified & directed(Drg No FD -232/34(M)/278 |
| 49 | Removing of unserviceable/broken long top rail and supply and fixing first classs hard wood (Indian teak wood) of size 40 mm X 19 mm thick to teapoy all as shown on drawings as specified & directed(Drg No FD -232/34(M). |
| 50 | Removing of unserviceable/broken short top rail and supply and fixing new short rail made out of first classs hard wood (Indian Teak wood) of size 40 mm X 19 mm thick to teapoy all as shwon on drawings as specified and directed(Drg No FD -232/34(M)/278 |
| 51 | Removing of unserviceable/broken top, tightening the loose frame by glue and bamboo pins and providing new top made out of 18/19 mm prelaminated partical board one side teak veneer exterior grade conforming to relevant IS with 4 mm thick Teak wood beading duly polished size 300 X 450 mm Table Peg. (Make - Novapan) (Drg No FD-236. |
| 52 | Removing unserviceable/broken legs and providing new leg made out of first classs hard wood (Indian teak wood) for table peg all as shown on drawings, as specified & directed (Drg No FD-236. |
| 53 | Removing of unserviceable/broken long top rail and supply and fixing first classs Hard wood (Indian teak wood) of size 40 mm X 19 mm thick to table pegall as shown on drawings as specified & directed (Drg No FD-236. |
| 54 | Removing of unserviceable/broken short top rail and supply and fixing first classs Hard wood (Indian teak wood) of size 40 mm X 19 mm thick to table pegall as shown on drawings as specified & directed (Drg No FD-236. |
| 55 | Removing of unserviceable/broken top, tightening the loose frame by glue and bamboo pins and providing new top made out of 18/19 mm prelaminated partical board one side teak veneer exterior grade conforming to relevant IS with 4 mm thick Teak wood beading duly polished size 900 X 450 mm Table Centre. (Make - Novapan) (Drg No FD-134/274). |
| 56 | Removing unserviceable/broken legs and providing new leg made out of first classs hard wood (Indian teak wood) for Table centre all as shown on drawings, as specified & directed (Drg No FD-235/274). |
| 57 | Removing of unserviceable/broken long top rail and supply and fixing first classs Hard wood (Indian teak wood) of size 50 mm X 20 mm thick to Table Centreall as shown on drawings as specified & directed (Drg No FD-236/384/25(M). |
| 58 | Removing of unserviceable/broken short top rail and supply and fixing first classs Hard wood (Indian teak wood) of size 50 mm X 20 mm thick to Table Centreall as shown on drawings as specified & directed (Drg No FD-236. |
| 59 | Removing of old unserviceable broken arm rest of chair CBA steel & providing new second classs HW handrest duly black polished all as specified and shown on drg No FD-75/120. |
| 60 | Removing of old unserviceable cushion seat / back from sofa sets three seater of size 21\"x 22\" and supply and fixing 100mm thick cushion of 40 density foam duly stiched Note : Tapestry cloth shall be of makeBombay Dyeing/ Raymond Furnishing / D\" Decor. Colour of cloth shall be as approved by Engr-in-charge make of form : Sleep Well / Springwell. |
| 61 | Removing of old unserviceable cushion seat / back from sofa set single seater of size 21\"x 22\" and supply and fixing 100mm thick cushion of 40 density foam duly stiched Note : Tapestry cloth shall be of makeBombay Dyeing/ Raymond Furnishing / D\" Decor. Colour of cloth shall be as approved by Engr-in-charge make of form : Sleep Well / Springwell. |
| 62 | Removing of old unserviceable cushion seat from chair writing, supply and fix new cushion seat 50 density with fabric cloth duly fixing with nut bolt and PVC bedding all round, all all as shown on drg complete all as specified and directed(Drg NoFD/E6/MAP/12) |
| 63 | Removing of old unserviceable cushion back from chair writing, supply and fix new cushion back of40 density with fabric cloth duly fixing with nut bolt and PVC beeding all around, all all as shown on drg complete all as specified and directed(Drg NoFD/E6/MAP/12) |
| 64 | Removing of old unserviceable nylon newar from chair verandah with nylon newar, preparation of steel surfaces (de-rusting & cleaning ) and apply one coat of synthetic enamel white paint to steel surfaces supply and fix new nylon newar 50mm wide, white shade, virgin quality, all as shown on drg complete all as specified and directed .(Drg-FD-256) |
| 65 | Spray painting to Almirah large steel with two coat of synthetic enamel paint over a coat of red oxied primer of approved quality/shade after applying putty on steel surfaces where ever necessary and making smoothening of surfaces where ever required by sand papering Complete all as specified & directed (Drg No FD-67/62/1031/FD/E6/MAP/18). |
| 66 | All as per item No 57 above but Almirah Small/Medium steel Drg No FD-67/1032 |
| 67 | All as per item No 57 above but Book shelf open large steel Drg NoFD -69/DB- 4131 |
| 68 | All as per item No 57 above but book case steel Drg No- FD-90M/1028/45M |
| 69 | All as per item No 57 above but table office clerk steel Drg No FD-84(M) |
| 70 | All as per item No 57 above but book shelf open small steel Drg No FD-69(M) |
| 71 | All as per item No 57 above but locker steelDrg No FD-1029 |
| 72 | All as per item No 57 above but side rack with tray steelDrg No FD-97(M) |
| 73 | All as per item No 57 above but chair CBA steel with ArmsDrg No FD-75(M) |
| 74 | All as per item No 57 above but chair CBA steel with/Out ArmsDrg No FD-75(M) |
| 75 | All as per item No 57 above but Shoe racksteel Drg No FD/E6/MAP/02 |
| 76 | All as per item No 57 above but Rack steel Drg No FD-129/106/1038 |
| 77 | Preparation of previously treated wooden surface of furniture items by scraping removing and cleaning all dirt and filling porcus surfaces or cavities with wood filler and apply melamyne polish will be done with compressor on whole wooden surface of furniture not only on replaced parts all as specified and directed for Chair dining. (Drg No FD-228/279/FD/MAP-II/05) |
| 78 | -Ditto- all as per item No 75 for Chair writing (Drg No FD-250/280) |
| 79 | -Ditto- all as per item No 75 for Chair Easy (Drg No FD-229) |
| 80 | -Ditto- all as per item No 75 for Peg table(Drg No FD-25/384) |
| 81 | -Ditto- all as per item No 75 for Sofa set 5 seater,4 seater & two seater(Drg No FD-18(M) /281) |
| 82 | -Ditto- all as per item No 75 for Side Board(Drg No FD-26/241) |
| 83 | -Ditto- all as per item No 75 for Table bed side(Drg No FD-284/28/FD/E6/MAP/15(R)) |
| 84 | -Ditto- all as per item No 75 for Table centre(Drg No FD-134/274) |
| 85 | -Ditto- all as per item No 75 for Table dressing Gents with mirror(Drg No FD-230/31/FD/E6/MAP/16) |
| 86 | -Ditto- all as per item No 75 for Table dressing Ladies with mirror(Drg No FD-251/32/FD/E6/MAP-II/07) |
| 87 | -Ditto- all as per item No 75 for Table writing(Drg No DB-3983/275) |
| 88 | -Ditto- all as per item No 75 for Teapoy(Drg No FD-232/34/278) |
| 89 | -Ditto- all as per item No 75 for Table dining 4 persons(Drg No FD-88/ FD/MAPII/03) |
| 90 | -Ditto- all as per item No 75 for Table dining 6 persons(Drg No FD-30/FD/MAP-II/03) |
| 91 | -Ditto- all as per item No 75 for Table dining 8 persons(Drg No FD-239/30) |
| 92 | -Ditto- all as per item No 75 for Table 3\" x2\" with drawer(Drg No FD-41/224/283) |
| 93 | -Ditto- all as per item No 75 for Table 3\" x2\" without drawer(Drg No FD-231/42) |
| 94 | Removing of old unserviceable cane from wooden furniture (other than chair verandah) and material and labour for recanning with new plastic cane 2 mm wide half round for weaving, 3-4 mm wide, 1/2 round for border complete all as specified and shown in drg.(Drg No FD-3/228/17/280/229) |
| 95 | Removing of unserviceable/broken leg of Table bed side and fixing with new legs with screw complete all as specified & directed (Drg No FD/E6/MAP/15 (R)) |
| 96 | Removing of unserviceable/broken handle of Table bed side and fixing with new s/s handle with screw complete all as specified & directed (Drg No FD/E6/MAP/15 (R)) |
| 97 | Removing of old unserviceable/damaged one piece back and seat of chair school with hand boardand fixing with new seat with appropriate screws. (Drg No FD/E6/MAP/05). |
| 98 | Ditto as above but old unserviceable/damaged hand board of chair school with hand boardand fixing with new hard board. (Drg No FD/E6/MAP/05). |
| 99 | Removing of old threaded unsv bolts from charpoy IP hard top/Bed hard and refitting new existing 08 x nos of bolts of appropriate sizes to charpoy IP hard top/ Bed hard all as specified and directed. (Drg No ED/MAP-II/01, FD/E6/MAP/08(R) |
