tender for Necessary Repair And Maintenance Of Various Roads Under Pwd Sub Division I Hanumangarh For The Year 2025-26 (Annual Rate Contract) - 1 Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlierand disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per MoRTH Specification Clause 201.By Mechanical Means In area of non-thorny jungle 2 Restoration of Rain CutsRestoration of rain cuts with soil, moorum gravel or a mixture of these, clearing the loose soil, benching for 300mm width laying fresh material in layers not exceeding 250 mm and compaction with plate compactor or power rammer to restore the original alignment, level and slopes as per drawings and MoRTH specifications Clause 3002 Mechanical Means 3 Maintenance of Earthen shoulder (filling with fresh selected soil)Maintenance of Earthen shoulder (filling with fresh selected soil) Making up loss of material/irregularities on shoulders to the design level by adding fresh approved selected soil and compacting it with appropriate equipment at OMC upto a lead of 1000 mas per MoRTH specification Clause 3003 4 Maintenance of Earhen shoulder (stripping of excess soil)Maintenance of Earhen shoulder (stripping of excess soil) Stripping excess soil from the shoulder surface to achieve the approved level and compacting with plate compactor at OMC as per drawings and MoRTH Specification Clause 3003 5 Maintenace of bituminous surface roadRepair to pot holes and removal of loose material, trimming of sides, cleaning of surface by providing tack coat, 13mm thick pre-mix carpet and seal coat type B as per MoRTH specificationClause 3004.2 6 Maintenance of WBM road including filling up of pot holes, ruts and rectifying corrugated surface, damaged edges and ravelling as per MoRTH specification Clause 404 7 Maintenance of CulvertsMaintenance of Culverts Maintenance of Hume pipe Culvert by way ofClearing, Cleaning, Erosion repair, repairs to cracks, parapet wall and protection work as per drawing and MoRTH specification Clause 201 & 2800 8 Maintenance of Culverts Slab typeMaintenance of Slab type Culverts by way of clearing, Cleaning, Erosion repair, repairs to cracks, parapet walls and Protection works as per drawing and MoRTH specification Clasue 201 & 2800 9 Maintenance of Road SignsMaintenance of road signs by way of cleaning and repainting of mandatory / requlatory / cautionary / informatory and place identifications sign board as perdrawings and MoRTH specification Clause 800 & 3000 10 Maintenance of 200 metre and km stonesMaintenanceof200metrekmstonebywayofrefitingoftiltedstones repairing with cement mortar, cleaning, repairing and lettering on 200 metre kmstoneand 5thkmstoneasperdrawingandMoRTHspecification Clause 1900 and 2800 Printing letters and figures of any shade with synthtic enamel paint of any approved colour to give an even shade, Painting two coats with synthetic enamel paint 11 Maintenance of 200 metre and km stonesMaintenanceof200metrekmstonebywayofrefitingoftiltedstones repairing with cement mortar, cleaning, repairing and lettering on 200 metre kmstoneand 5thkmstoneasperdrawingandMoRTHspecification Clause 1900 and 2800 Printing letters and figures of any shade with synthtic enamel paint of any approved colour to give an even shade,Printing letters and figures of any shade with synthtic enamel paint of any approved colour to give an even shade 12 Maintenance of Road FurnituresMaintenance of Road Furnitures Painting two coats with superior grade synthetic enamel paint of approved quality to give an even shade including writing lettering and figures with synthetic enamel paint as per IRC specifications. 5th Kilometre Stone 13 Maintenance of Road FurnituresMaintenance of Road Furnitures Painting two coats with superior grade synthetic enamel paint of approved quality to give an even shade including writing lettering and figures with synthetic enamel paint as per IRC specifications. Ordinary Kilometre Stone 14 Maintenance of Road FurnituresMaintenance of Road Furnitures Painting two coats with superior grade synthetic enamel paint of approved quality to give an even shade including writing lettering and figures with synthetic enamel paint as per IRC specifications. Traffic Sign Boards (cautionery, mandatory & informatory) 15 Maintenance of Road FurnituresMaintenance of Road Furnitures Painting two coats with superior grade synthetic enamel paint of approved quality to give an even shade including writing lettering and figures with synthetic enamel paint as per IRC specifications. Direction & Place Identification sign boards including painting of posts. 16 Brick masonry work in cement mortar in substructure complete excepting pointing and plastering, as per drawing and MoRTH specification Clauses 1300 & 2200 In 1:4 Cement mortar 17 Plastering with cement mortar (1:4), 15 mm thick on brickwork in substructure as per MoRTH specification Clauses 1312.4 & 2200 18 Providing concrete for plain/reinforced concrete in open foundations completeasperdrawingsandMoRTHspecificationsClause1702,1703, 2102 & 2104 P.C.C. grade M 20 Nominal mix (1:2:4) 19 Painting Two Coats on New Concrete Surfaces Painting two coats including primer coat after filling the surface with synthetic enamel paint in all shades on new, plastered / concrete surfaces as per drawing and MoRTH Specification Clause 801 20 Painting on Steel Surfaces Providing and applying two coats of ready mix paint including primer coat of approved brand on steel surface after through cleaning of surface to give an even shade as per drawing and MoRTH Specification Clause 801 21 Cutting of construction joint/ longitudinal joint 4 to 6 mm. wide & 75 to 100 mmdeep using mechanical concrete cutter including costofdiamondbit cuttingwheel andfilling ofbitumen sealing compound in groove including cost of sealing compound. 22 Providingand fillingjoint sealingcompound inCC Pavement/ Structures as per drawings and MoRTH specifications with coarse sand and 6 per centbitumen by weight 23 Fixing of sign board having including excavation cement concrete1:5:10(30x30x60cm)andtransportationcompleteof size : Two Post Size 150x120 & 120x75 cm 24 Fixing of sign board having including excavation cement concrete1:5:10(30x30x60cm)andtransportationcompleteof size : Single Post 25 Marking Centre Line and stop lines etc. on road as per IRC pattern with thermoplastic paint of approved quality and make with 8% glass beads laid on the road surface at temperature 160 C with a special applicator machine complete with a special applicator machine complete with labour material and traffic diversion arrangements. 26 Providing and laying rounded hump type speed breakers for crossing speed 25km/hasperIRCdesignincludingprovidingandapplyingbitumen emulsion tack coat,making speed breaker in designed profile with bituminous macadam, providing seal coat type B for sealing the voids and marking chequered pattern with thermoplastic paint complete as perIRC : 99-1988, 3.70 meter wide and 10 cm high for general traffic 27 Repair to pot holes by removal of failed material, trimming the sides to vertical and levelling the bottom, cleaning the same with compressed air or any appropriate method filled with 75mm B.M, applying bitumen emulsion prime coat at the bottom and bitumen emulsion tack coat on sides and on bottom as per MoRTH specifications Clauses 3004.2 28 Maintenance of Gravel Road Maintenance of gravel road including making up the loss of profile, rectifying corrugated surface, filling up of depressions, pot holes and erosion gullies by adding fresh material and compacting it with appropriate equipmentor to stripexcess of material from the road surface as per drawings and MoRTH specification Clause 401 29 Applying epoxy mortar over leached, honey combed and spalled concrete surface and exposed steel reinforcement complete as per MorTh Specification Clause 2804 30 Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6per centof mix and filler,transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH Specifications Clause 507 complete in all respects for Grading-II(13 mm nominal size) Bitumen (VG-30) 31 Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using Viscosity grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per MoRTH Specification Clause 510. Case - IIBy Mechanical Means Bitumen (VG-30) 32 Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per MoRTH Specification Clause 511 By Mechanical Means Case - II:Type B Bitumen (VG-30) 33 Tack Coat, Providing and applying tack coat with Bitumen emulsion (RS-1)using emulsion distributorattherateof0.25to0.30kgpersqmonthe prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per MoRTH Specification Clause 503. 34 Supply at plant site Close-graded premixsurfacing material for patchworkwithspecifiedgradedcrushedaggregateasper Table No. 500-19 ofMoRTH specification clause 508.2.4 premixed with (VG-10) bitumen binder 5% in Hot Mix Plant (30- 40tonne) including cost of aggregate, binder and machines with fuel etc. 35 Removal ofUnsuitable Soil with Disposal upto 1000 mRemoval ofunsuitable soil including excavation, loading and disposal upto 1000mleadbutexcludingcompaction groundsupportingembankment subgrade replacement by suitable soil, which shall be paid separately as per Clause 305.3.4 as per MoRTH Specification Clause 301.3.11
