|
| 1 | M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over a screed of 15mm thick in CM 1:6 including dimantiling of old existing floor tiles incl. removal of debris outside of MOD land etc complete all as specified and directed. |
| 2 | M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but notexceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over a screed of 15mm thick in CM 1:6 including dimantiling of old existing floor tiles incl. removal of debris outside of MOD land etc complete all as specified and directed. |
| 3 | S&F Ultra charged Vitrified Coloured Ceramic tiles (light shade) 8-9mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over a screed of 15mm thick in CM 1:6 etc including dismantling of old existing floor tiles of size upto 0.36 Sqm cut from same shade ofcomplete all as specified and as directed.. |
| 4 | S&F ultra charged for Vitrified coloured ceramic tiles (light shade) 8-9mm thick (square/rectangular) area of each tilenot exceeding 0.36 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over 10 mm thick rendering in cement mortar 1:4. etc including dismantling of old existing floor tiles of size upto 0.06 Sqm cut from same shade ofcomplete all as specified and as directed..Note : The width of tiles 100 mm to be cut from full size of tiles as directed by Engineer-in-charge. |
| 5 | S&F coloured glazed ceramic tile in vertical surface 450x300x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick rendering CM 1:4 backing coat including dismantling of wall tiles/Terrrazzo/Stone Slabs/ or any type of materials in dado including cement mortar bedding (but not backing) and removing upto Brick wall surface and removal of rubibish out side the MD land complete all as specified and as directed. |
| 6 | M&L for coloured vitrified heavy duty ceramic scratchand stain resistantexternal tiles of size 40cmx40cmx12mm thick thick laid over 15mm thick CM (1:4) set jointed and pointed in neat cement slurry in floors including dismantling of old existing tiles incl. removal of debris outside of MOD land etc complete all as specified and directed. |
| 7 | M&L 18-20 mm thick Graniteblack colour including rounding edges to exposed portion as in platforms for wash hand basin / sink (table, rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like laid in cement mortar (1:4) incl pointing in white cement (1:2) using mable dust with admixture of pigments to match with shade granite including cutting for securing of slab,including after dismantling of existing any type of stone or concrete etc complete all as specified and as directed. |
| 8 | M&L non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over a screed of 15mm thick in CM 1:6 etc including dismantling of old existing floor tiles of size upto 0.36 Sqm cut from same shade ofcomplete all as specified and as directed..complete all as specified and as directed.. |
| 9 | M&L Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over 10 mm thick rendering in cement mortar 1:4 etc including dismantling of old existing floor tiles complete all as specified and as directed..Note : The width of tiles 100 mm to be cut from full size of tiles as directed by Engineer-in-charge. |
| 10 | Dismantling structural steel work including doors, gates but excluding framed truss etc. |
| 11 | S&F for Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165etc. complete, as specified, |
| 12 | M&L for preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zincchrome primer complete all as specified and as directed. |
| 13 | Taking down or detaching old MS grill by cutting and refixing in the same location incl. all necessary arrangement and T&P by contractors own arrangement of size exc. 0.5 sqm and not exc. 1 Sqm each with PCC (1:3:6) type C-1 using 20mm graded stone aggregateandincl. all fittings and fixtures and removed from site and disposed off outside MD land after measurement, entry in MB as Sch of credit material and signature by both parties complete all as specified and directed. |
| 14 | Taking down or detaching old MS grill by cutting and refixing in the same location incl. all necessary arrangement and T&P by contractors own arrangement of exc. 1 sqm and not exc. 1.5 Sqm each with PCC (1:3:6) type C-1 using 20mm graded stone aggregateandincl. all fittings and fixtures and removed from site and disposed off outside MD land after measurement, entry in MB as Sch of credit material and signature by both parties complete all as specified and directed. |
| 15 | Taking down or detaching old MS grill by cutting and refixing in the same location incl. all necessary arrangement and T&P by contractors own arrangement of size exc. 1.5 sqm and not exc. 2 Sqm each each with PCC (1:3:6) type C-1 using 20mm graded stone aggregateandincl. all fittings and fixtures and removed from site and disposed off outside MD land after measurement, entry in MB as Sch of credit material and signature by both parties complete all as specified and directed. |
| 16 | M&L for preparation of old steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zincchrome primer complete all as specified and as directed. |
| 17 | Demolition of brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed. |
| 18 | M&L for pre-cast cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in block masonry with solid blocks, exc. 10cm in width and setting in cement mortar 1:6 after demolition of old existing damaged .brick work complete all as specified and as directed |
| 19 | M&L for rendering 10mmthick in CM 1:6 on fair face of brick or concrete surfaces of wallsfinished even and fair Including taking down, raking out joints, hacking for key, scrubbing down with water etc and removing rubbish of the premises and applying two coats of oil emulsion distemper over a coat of 1mm thick wall care puttyafter preparation of surface complete all as specified and as directed. |
| 20 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exc 1.5 sqm etc complete all as specified and directed. |
| 21 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but n exc 4 Sqm etc complete all as specified and directed. |
| 22 | Taking down of shutter exc 1.0 sqm but n.exc 2.0 Sqm each |
| 23 | Taking down of Shutters of any description n exc 1sq.m each |
| 24 | Taking down of shutter exc 2.0 Sqm each |
| 25 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 26 | S&F Factory Made Solid PVC Moulded Door Shutter,with particle board 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing with particle board core. |
| 27 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other single/double rebate Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 28 | S&F 30 mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides.complete all as specified |
| 29 | S&F 30 mm thick IInd class hard wood glazed and skelton shutters open rebated and prepared to receive glass , gauge etc,but divided into squares, with plain, chamfered or ounded, mitred and rebated sash bars, any number sto squares with plain, chamfered or rounded mittered and rebated sash bars any numbers, edges of framing plain chamfered |
| 30 | S & F magnetic catch for cupboard cabinet shutters of approved quality and of suitable size complete all as specified and directed. |
| 31 | S & F 40mm dia, cupboard knobs fixed with nut, screw and washer of brass, bright finished complete all as specified and directed. |
| 32 | S&F stainless steel 75 mm butt hinges for doors complete all as specified. |
| 33 | S&F stainless steel 100 mm butt hinges for doors complete all as specified. |
| 34 | S&F 150 mm size extruded aluminium alloy handles fabricated type anodized complete all as specified. |
| 35 | S&F 150 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified. |
| 36 | S&F 250 mm long aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheets cast or extruded sections or cast aluminium alloy complete all as specified. |
| 37 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard 3 track sliding sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. complete all as specified. |
| 38 | Supply and fixing Powder coated aluminium window shutters, sliding type 3 track aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, necessary locking arrangement and roller etc. complete all as specified |
| 39 | S&FStainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples |
| 40 | S&F 4mm thick figured glass pin headed type and glazing with oil putty in square n.exc 0.50 Sqm in each pane complete all as specified. |
| 41 | S&F in tinted sheet glass ordinary quality 4mm thick insquare exc 0.50 Sqm each pane glazingwith oil putty, clip in metal frameand wooden beading in metalframecomplete all as specified. |
| 42 | S&F in repairs mild steel 150 mm helical door springs including roller and roller plate complete (Helical door spring) including welding to steel chowkhats if required all as specified. |
| 43 | S&F in repair 25mm dia stainless steelcurtain rod including 2 Pair of fancy typebrackets ,fixed with 45cm long mild steel screws complete all as specified |
| 44 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) \"P\" or \"S\" trap including dismantling of old Water closet complete all as specifed and as directed. |
| 45 | S&F in repairs plastic water closet seat cover, White, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specifed and as directed. |
| 46 | S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap, and to flushing pipe, anti-syphonage pipe .complete including making good to floor witcomplete all as specified |
| 47 | S&F in repairPVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action with inlet ball valve and float including flush pipe, handle, bracket PVC short/long bendetc. complete all as specified and directed |
| 48 | S&F in repair PVC flush pipe 32 mm bore high density for low level flushing cistern including all joints, washers suitable for Indian type/ Pedstal type WC complete all as specified. |
| 49 | S&F in repairs PVC connection 15 mmsize, 60 cm long with PTMT adopter,check nutsand washer on both sides for hot water complete all as specified. |
| 50 | S&F in repairvitreous china wash hand basin, white,flat back size 550 x 400 mm including one number brass CP waste coupling, waste pipe 32 mm dia, brackets 2 numbers including cutting for and pinning in ends of brackets complete all as specified and directed. |
| 51 | S&F in repair 32 mm dia PVC collapsiblewaste pipe for WHB/Kitchen sink complete all as specified. |
| 52 | S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mmcomplete all as specified and directed. |
| 53 | Cutting chases, pinning in, stone concrete block or slabs wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth and removal of debris otside of MOD land complete all as specified. |
| 54 | S & F in repair of CPVC pipes 25mm Incl. SDR 11Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down of pipe of 20 mm GI pipe complete all as specified. |
| 55 | S & F in repairof CPVC pipes 20mm all SDR 11 Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down of pipe of 15 mm GI pipe complete all as specified. |
| 56 | S&F of 20 mm dia CPVC brass elbow complete all as specified and as directed. |
| 57 | S&F of 20 mm dia CPVC Brass Tee complete all as specified and as directed. |
| 58 | S&F of 20 mm dia female/male brass threaded adapter complete all as specified and as directed. |
| 59 | S&F of 15 mm CP extension nipple complete all as specified and as directed. |
| 60 | S & F in repair PVC(SWR) pipes 110mm dia single socketed in any length with rubber ring jointsfixed to walls fixed with PVC straps or clipsincluding dismantling and breaking of pipe and fittings complete all as specified and as directed. |
| 61 | S&F in repair PVC (SWR) pipes75 mm size in bore single socketed , in any length with rubber ring joints, fixed to walls fixed with PVC straps or clips including dismantling and breaking of pipe and fittings complete all as specified and as directed. |
| 62 | S&F in repair PVC (SWR) 110 mm bore pipes single socketed, in any length with rubber ring joints laid in floors including dismantling and breaking of pipe and fittings complete all as specified and as directed. |
| 63 | S&F in repair PVC (SWR) 75 mm bore pipes single socketed, in any length with rubber ring joints laid in floors including dismantling and breaking of pipe and fittings complete all as specified and as directed. |
| 64 | S&F in repair PVC bends anyradius75mm dia |
| 65 | S& F in repairPVC bends anyradius 110mm dia |
| 66 | S& F in repairPVC bends with Access Door75mm dia |
| 67 | S& F in repairPVC bends with Access Door 110mm dia |
| 68 | S& F in repairPVC Single \"Y\" Junction 75mm dia |
| 69 | S& F in repairPVC Single \"T\" Junction 110mm dia |
| 70 | S& F in repairPVC Single \"T\" Junction with Access Door 110mm dia |
| 71 | S&F in repairsbib tapcast copper alloy 15mm fancy type , Chromium plated screwed down, high pressure, with capstan head , screwed down screwed for iron pipe. |
| 72 | S&F in repair, Quaeter turn bib taps, brass, fancy type, long body, chromium platedfor 15 mm borepipe or for brass ferrule orto GI socket complete all as specified and directed. |
| 73 | S&F in repair 15 mm bore diameter brass CP two way bib taps with crutch or butterfly handle,screwed down,screwed for pipe or for brass ferrule. |
| 74 | S&F in repair 15 mm bore diameter brass CP wall mixture any type complete all as specified and as directed. |
| 75 | S&F in repair pillar taps, brass, with capston heads, fancytype, chromium plated, screwed down high pressure with or without lettered \"Hot\" or \"cold\" with long screwed shanks and flynuts screwed for 15mm bore iron pipe andfixed in repair, complete all as specified and directed. |
| 76 | S & F in repair pillar tap swan neck fancytype, chromium plated, screwed down high pressure with or without lettered \"Hot\" or \"cold\" with long screwed shanks and flynuts screwed for 15mm bore iron pipe andfixed in repair, complete all as specified and directed. |
| 77 | S&F in repairs stop valves 15 mm nominal bore, brass, fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfllly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket complete, fixed in repairs, all as specified and directed . |
| 78 | S&F in repairs angle valves 15 mm nominal bore, brass, chromium plated,complete, fixed in repairs, all as specified and directed . |
| 79 | S&F in repairs shower rose 15mm of brass chromium plated125 mm dia round with shower arm of190mm Long Light Body complete all as specified and directed. |
| 80 | S&F,in repairs 15mm size health faucet, ABS body ,with wall hook and 1 metrestainless steel braided rubber hose pipe complete all as specified and as directed. |
| 81 | S&F in repairs brass chromium plated grating 125 mm dia circular with centre hole/ without hole of approved make and fixing with cement mortar 1:3 on Nahani trap or floor trap complete all as specified. |
| 82 | S&F in repairs100mm dia PVC (SWR) floor/Nahani trap, plain with grating including solvent cement complete all as specified and as directed. |
| 83 | S&F in repairs75mm dia PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and as directed. |
| 84 | S&F Mirror cabinate of size 300mmx450mmmirror of selected qualityfixed in wall screws complete all as specified and directed. |
| 85 | S & F in repairs beveled edge looking mirror of 5.5 mm thick 600mmx450mmof selected quality mounted on 6 mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified & directed. |
| 86 | S&F in repairs Glass corner shelf including CP railing, radius 300 mm complete all as specified and directed by the Engr-in-Charge,fixed in repairs. |
| 87 | S&F in repairtubular towel rail 600 mm long of brass chromium plated 20 mm dia D type 60 cm long fixed with two plugs (gutties) of 2nd class hard wood embedded in cement mortar 1:3 with MS screws complete all as specified. |
| 88 | S&F in repairs Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed. |
| 89 | S&F in repairs SS soap dish 100mm Complete all as specified and directed.\" |
| 90 | S&F in repairs kitchen plate rack made of stainless steel 1mm thick complete size 1200 x 900mm x 200mm width of trade pattern complete all as specified. |
| 91 | S&F 1000 Ltrs. Capacity rotational moulded polyethylene water storage tanks (cylinder vertical with class top) hoisted and fixed in position including dismatling and removing to store all as specified |
| 92 | S&F 500 Ltrs. Capacity rotational moulded polyethylene water storage tanks (cylinder vertical with class top) hoisted and fixed in position including dismatling and removing to store all as specified |
| 93 | S&F Tank union25mminternal dia complete all as specified and as directed |
| 94 | S&F 25 mminternal boreBall valve high pressure of PTMTwith epoxy coated Aluminiumrod& high density plastic ball screwed for iron pipe and fixed.(Minimum weight 20mm-210gms)complete,fixed in repairs, all as specified. |
| 95 | S&F 25 mm internalbore nipple suitable for HDPE water tank. (Min wt 45 gms). |
| 96 | S&F in repairs HDPE PVC lid (cover) for 500 ltrs/1000 ltrs capacity PVC tank complete all as specified. |
| 97 | Materials and labour for cleaning of water tanks of capacity exceeding 250 litres and not exceeding 500 litres including cleaning of bottom and internalsurfaces by brushing with nylon brush, removing all deposits/ scales, silt /other sticky or foreign materials from adhering surfaces and washing inside surfaces of water tanks with approved quality of bleaching powder solution and finally re cleaning with fresh plain water thoroughly to remove all the trace of bleaching powder and draining out the collected water including writing date of cleaning on water tanks with enamel paintcomplete all as directed. |
| 98 | Materials and labour for cleaning of water tanks of capacity exceeding 500 litres and not exceeding 1000 litres including cleaning of bottom and internalsurfaces by brushing with nylon brush, removing all deposits/ scales, silt /other sticky or foreign materials from adhering surfaces and washing inside surfaces of water tanks with approved quality of bleaching powder solution and finally re cleaning with fresh plain water thoroughly to remove all the trace of bleaching powder and draining out the collected water including writing date of cleaning on water tanks with enamel paint complete all as directed. |
| 99 | M&L for Demolition of un reinforced cement Concrete of any description and in any position not otherwise specifically provided for sunken slabs |
| 100 | M&L for PCC 1:5:10 E2(40 mm graded stone aggregates) for sunken slabs |
| 101 | M&L 18/19mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work etc complete all as specified and as directed . |
| 102 | M&L for 0.9mm thk Decorative laminate type I of surface finish ,colour and pattern as approved fixed with approved adhesive all as per makers instructions and etc complete all as specified and as direted. |
