|
| 1 | Earthwork n inexcavationoffoundationtrenchesofdrainorseptictank,soakwelletc.inallsortsofsoilincludingremoving,spreadingorstackingthespoilswithinaleadof75 mtr.orasdirectedandincludingtrimmingthesidesoftrenches,leveling,dressingandrammingthebottombailingorpumpingoutwateretc.asrequiredcomplete.a) Depthofexcavationnotexceeding1500mm. |
| 2 | Depthofexcavation foradditionaldepthbeyond1500 mm, andupto3000mm.Butnotrequiringsharing. |
| 3 | Fillinginfoundationorplinthbyfinesandinlayernotexceeding15 cm.asdirectedandconsolidatingsamebythroughsaturationwithwaterandrammingcomplete,includingthecostofsupplyofsand. Do by fine sand |
| 4 | b)Earth work in filling in foundation trenches or plinth with good earth in layers not exceeding 150 mm including watering and ramming etc layer by layer complete (Payment to be made on the basis of measurement of finished quantity of work) i)With earth obtained from exavation of foundation. |
| 5 | Earth work in filling in compound, tank, low land,ditches etc. with good earth, in layers not exceeding 150 mm. including breaking clods and consolidating the same by ramming and dressing complete. (Payment will be made on profile measurement before and after the work) With carried earth arranged by the contractor within a radius exceeding 3 km. but not exceeding 5 km. including cost of carried earth. |
| 6 | Singlebrickflatsoling orpickedjhamabricksincludingramminganddressingbedtoproperlevelingandfillingjointwithpowerearthorlocalsandincludingcostofsandorearth. |
| 7 | Brickworkwith1stclassbricksincementmortar(1:6) (a) In foundation and plinth |
| 8 | InsuperstructureGr.Floor |
| 9 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor. |
| 10 | 125mmThickbrickworkwith1stclassbricksincementmortar(1:4)ingroundfloorusingapprovedH.B.nettingineverythirdlayer. |
| 11 | 75 mmThickbrickworkwith1stclassbricksincementmortar(1:4)ingroundfloorusingapprovedH.B.nettingineveryalternate layer. |
| 12 | Hire and labour charges for shuttering with centreing and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor). (When the height of a particular floor is more than 4 m. the equivalent floor ht. shall be taken as 4 m. and extra for works beyond the initial 4 m. ht. shall be allowed under 12(e) for every 4 m. or part thereof.) (Mode of measurement : Area in plan X meanheight of staging upto soffit of shuttering above initial 4 m. a) 25mm.to30mm.thickwoodenshuttering. |
| 13 | c) 25mm.to30mm.shutteringwithoutstaginginfoundation. |
| 14 | d) Steel shuttering or 9 mm to 30 mmthickapproved quality plyboard shuttering in any concrete. |
| 15 | (a)Ordinarycementconcrete (mix 1:1:5:3)withgradedstonechips (20 mm.nominalsize)excludingshutteringandreinforcement,ifany,ingroundfloorasperrelevantIScodes, Pakurvariety. |
| 16 | Ordinarycementconcrete (mix 1:2:4)withgradedstonechips(20 mm.nominalsize)excludingshutteringandreinforcement,ifany,ingroundfloorasperrelevantIScodes Pakurvariety |
| 17 | Reinforcementforreinforcedconcreteinallsortsofstructuresworkincludingdistributionbars.Stirrupsbindersetc.initialstraighteningandremovaloflooserustcuttingtorequisitelength,hooking&bendingtocorrectshape,placinginproperpositionandbindingwith1.6gaugeblackannealedwireateveryintersection,completeasperdrawinganddirection.Torsteel / Mildsteel.SAIL/ TATA/RINL a)Forworksinfoundation,basementanduptoroofofgroundfloor upto4 m. |
| 18 | Labourforchippingofconcretesurfacebeforetaking up plastering work. |
| 19 | Plaster( towall,floor,ceilingetc.)withsansandcementmortarincludingroundingofforchamferingcornersasdirectedandrackingoutjointsincludingthroating,nosinganddripcourse,scaffolding/ stagingwherenecessary. i) With1:6cementmortar :a) 15mm.thick( Gr.Floor) |
| 20 | b) 20mm.thick( Gr.Floor) |
| 21 | ii) With1:4cementmortar : a) 10mm.thick( Gr.Floor)forceilingbottomofchujja,beametc. |
| 22 | Artificialstoneinfloor,dado,straicaseetc.withcementconcrete (1:2:4)withstonechipslaidinpanelasdirectedwithtoppingmadewithordinaryorwhitecement (asnecessary)andmarbledustinproportion(1:2)includingsmoothfinishingandroundingoffcornersincludingrakingoutjointsorrougheningofconcretesurfaceandapplicationofcementslurrybeforeflooringworksusingcement @1.75kg/sq.m.Allcompleteincludingallmaterialsandlabouringroundfloor. 3mm.thicktoppingusinggreycement. 35 mm |
| 23 | Neatcementpunningabout1.5 mm.inwalldado windowsillsdrainetc. |
| 24 | Woodworkindoorandwindowframeinfittedandfixedinpositioncompleteincludingaprotectivecoatofpaintingatcontactsurfaceoftheframeexcludingcostofconcrete,ironbutthingsandM.S.clamssal (siliguri) |
| 25 | Supplying,fitting&fixingM.S.clampsfordoorandwindowframemadeofflatbifurcatedwithnecessary screwsetc.bycementconcrete(4:2:1)asperdirection. 40mm.x6 mm.250mm.length. |
| 26 | OxidisedironbutthingesofapprovedqualityfittedandfixedwithsteelscrewwithISImark. 100 x 58 x 1.90 mm.(Oxidised) |
| 27 | Supplying,fittingandfixinganodizedaluminumbarrel / tower / socketbolt 225 mm.long&10 mm.diaboltofapprovedqualitymakefromextrudedsectionwithconformingtoI.S.204/74fittedandfixedwithcadmiumplatedscrews225 mm.long&10 mm.diabolt. |
| 28 | Supplying,fittingandfixinganodizedaluminum‘D’typehandleofapprovedqualitymanufacturedfromextrudedsectionconfirmingtoI.S.specification(I.S. 230/72)completewithcontibuousplatebase. 100 mm.gripx10 mm. diarod. |
| 29 | Supplying,fittingandfixinganodizedaluminum aldrop / slidingboltofapprovedqualitymanufacturedfromextrudedsectionconfirmingtoI.S.specification(I.S. 2681/66)complete .250 mm.longby16diabolt. |
| 30 | Door stopper (Brass) |
| 31 | 125 mm.longwoodenbufferblockfittedandfixedcompletewithnecessaryscrewsteak. |
| 32 | M.S.orW.I.ornamentalgrillofapproveddesign,jointcontinuouslyweldedwithM.S W.Iflatsandbarsforwindowsrailingetc.fittedandfixedwithnecessaryscrewsandhugsingroundfloor. Grillweighingabove10kg/m2andupto16kg/m2 |
| 33 | Collapsiblegatewith40 x 40 mm.6 mm. Teeastopandbottomguidedrail20 x 10 x 2 mm.verticalchannels100 mm.apartinfullystretchedposition20x5 mm.M.S.flatascollapsiblebracingsproperlyrivetedandwasheredincluding38mm.steelrollersincludinglockingarrangement,fittedandfixedinpositionwithlugssetincementconcreteandincludingcuttingnecessaryholeschasingetc.inwalls,flooretc.andmakinggooddamages completeingroungfloor (Payment will be made on the area of the gate covered by two guard rails and two extreme channels) |
| 34 | Supplyingsolidflushtypedoorsofcommercialqualitythetimberframeconsistingoftopandbottomrails andsidestyleofwellseasonedtimber6.5 cmwideeachandtheentireframefittedwith37.5 mm.widebattensplacesbothwaysinordertomakethedoorofsoildcore,internallappinggurjanorsimilarwoodveneersusingphenolformaldehydeasglueeetc.complete includingfittingandfixingtheshutterinpositionbutexcludingthecostofhingesandotherfittingsingroungfloor. 32 mm thick shutters ( single leaf) |
| 35 | Supplying,fittingandfixingsteelwindowandventilatorswithorwithoutintegratedgrillsconformingtoIS1038-1975 asperdrawingandmanufacturedfromrolledsteelsectionconformingtoIs7452-1974withnon-frictionprojectingtype,boxtypehingesglazingblips,lunglockingbrackt,handleplateetc.includinghoistinginposition,straighteringreguired,fixinglugsincementconcrete (1:2:4)withstonechips20 mm.downcuttingholesandmendinggooddamagestomatchwithexistingsurfacecompleteinall respectexcludingglaxingingroundfloor,flashbuttweldedwindowsandventilators. . a) Withoutintegratedgrill. i) FixedtypesteelwindowasperI.Ssizeswithhorizontalglazingbars. |
| 36 | ii)Open-ablesteelwindowsasperI.S.sizeswithsidehungshutters. |
| 37 | iii) Twopointnosesteelhandleincludingfittingandfixing. |
| 38 | iv) Aluminiumpegstay300 mm.longincludingfittingandfixing. |
| 39 | v) CentrehungventilatorasperI.S.sizes58 cm. |
| 40 | c) SupplyingbestIndiansheetglasspanessetinputtyandfittedandfixedwithnailsandputtycomplete. (inallfloors for internal wall & upto 6 m height for external wall). 3 mm thick (weighing 7.4 Kg/ Sqm) |
| 41 | Supplying,fittingandfixing Godrejmorticelock (local best approved quality ) 6 lever with handle connected rods and keys crossing a with chromium plated handle. |
| 42 | Supplying,fittingandfixing Godrejmorticelock chromium plated with latch and keys 4 levers, including fitting and fixing complete |
| 43 | Supplying,fittingandfixinginpositionapprovedPVCdoorframemadeofextrudedPVCmultichamberhallowsectionhavingdimensions60mm.x50 mm.x2 mm.(+0.2mm.),horizontalsectionbygalvanizedsteelscrewsafterinsertingtwonumbersteelbracketsasreinforcementmakingsuitablespaceforplacinghinges,onesteeltube40mm. x 20mm. x 1.2mm.will beinsertedononefullverticalsideoftheframeasreinforcementtheframewillthenbefixedintheoperingwiththehelpofPVCexpandablefastenerwoodenguttiesandgalvanishedsteelscrewsincludingcostofall materialsandlabourhirechargesofallmaterials,taxesandallotherincidentalchargescomplete. |
| 44 | Supplying,fittingandfixing P.V.Cdoorshutterofapprovedqualityandshadeinposition,thestyle&railofthePVCdoorshutterwillbemadeofrigidPVCmulticavityhollowchamberof50mm. x 30mm. sectionwith2.0 mm.(+0.2mm.)wallthicknesshorizontal&verticalsectionshallbefixedtoeachotherbyselftappingscrewsandonesolid ..toolsandplantsandappliancescarriageofallmaterials,taxesandallotherincidentalchargescomplete.Therateisexclusiveofcostofhinges,haspbolt,towerbolt,doorringetc.P.V.Cdoorshutter30mm.thick : |
| 45 | 25mm.thickdampproofcoursewithcementconcretewithstonechips (1:1:5:3)[withgradedstoneaggregate10mm.nominalsize]andadmixtureofwaterproofingcompoundaspermanufacturer’sspecification..asdirected(costofwaterprppfingcompound&polymerbasedpainttobepaidseparately.) |
| 46 | a) Primingonecoatontimberorplasteredsurfacewithsyntheticoilboundprimerofapprovedquality,includingsmootheningsurfacebysandpaperingetc. |
| 47 | b) Primingonecoatonsteelorothermetalsurfacewithsyntheticoilboundprimerofapprovedquality,includingsmootheningsurfacebysandpaperingetc |
| 48 | Paintingwithbestqualitysyntheticenamelpaintofapprovedmakeandbrandincludingsmootheningsurfacebysandpaperingetc. includingusingofapprovedputtyetc.onthesurfaceifnecessary.a) Ontimberorplasteredsurfacewithsupergloss(hi-gloss) Ontimberorplasteredsurfacewithsupergloss(hi-gloss)2coats (anyshadeexceptwhite) |
| 49 | b) Onsteelorothermetalsurfacewithsupergloss (hi-gloss) 2coats(withanyshadeexceptwhite) |
| 50 | Cementwashing includingcleaningandsmootheningsurfacethoroughlyexternalsurfaceonecoat. |
| 51 | Supplying,fittingandfixing UPVCpipesA-typeandfittingsconformingtoIS : 13592-1992withallnecessaryclamps,nails,includingmakingholesinwall,flooretc.cuttingtrenchesinanysoil,thorough masonryconcretestructureetc. UPVC pipes. i) 110 mm. dia |
| 52 | A)UPVC pipes-110mm.dia |
| 53 | B)plain tee-110mm. Dia |
| 54 | C)plain y-110. dia |
| 55 | D)bend 87.5 degree-110mm. Dia |
| 56 | E)shoe-110mm. Dia |
| 57 | Supplying,fittingandfixing flatbackurinalinwhitevitreouschinawareofapprovedmakeinpositionwithbrassscrewson75 x 75 x 75 mm. woodenblockscomplete. 470 x 280 x 340 mm. |
| 58 | Supplying,fittingandfixing orrissapattern – waterclosetinwhiteglazedvitreouschinawareofapprovedmakeinpositioncompleteexcluding‘D’or‘S’trap 530 x 410 mm. |
| 59 | Supplying,fittingandfixing 10literPVClowdowncisternconformingtoI.S.specificationwithPVCfittingscompleteC.I.bracketsincludingtwocoatsofpaintingtobracketetc. |
| 60 | Supplying,fittingandfixing approvedbrand32 mm.diaPVCwastepipe,withPVCcouplingatoneendfittedwithnecessaryclamps.900 mm. long. |
| 61 | Supplying,fittingandfixing approvedbrand32 mm.diaPVCwastepipe,withPVCcouplingatoneendfittedwithnecessaryclamps.750 mm. long. |
| 62 | Supplying,fittingandfixing approvedbrandPVCconnectorwhiteflexiblewithbothendcouplingwithheavybrassCPnut15 mm.Dia .450mm.long. |
| 63 | Supplying,fittingandfixing whitechinabestqualityofapprovedmakewashbasinwithC.I.bracketson75 x 75 mmwoodenblocksC.P.wastefittingsof32 mm.diaoneofapprovedqualitybrassC.P.pillarcockof15mm.………..including mendinggoodalldamagesandpaintingthebracketswithtwocoatsofapprovedpaints.550x400mm.size. |
| 64 | Supplying,fittingandfixing bestqualityIndianmakemirror5.5mm.thickwithsilveringapprovedquality asperI.S.I.specificationsupportedonfiberglassfremeofanycolourframesize600 x 450 mm.complete inallrespectasperdirectionofengineer-in-charge. |
| 65 | Glassshelveswithaluminiumguardrailssize600 x 125 mm.with505 mm.thickglass. |
| 66 | Supplying, fitting and fixing porcelin soap tray of approved make. (i) Recessed soap tray of size 150 mm. X 150 mm. |
| 67 | Supplying,fittingandfixing allumium approvedbrandtowelrail25 mm.dia450 mm.longwithtwobracketscomplete allrespectasperdirectionofengineer-in-charge. |
| 68 | a) Supplying, fitting & fixing Cast iron soil pipe only conforming to I.S. 3989 /1970 and I.S. 1729/1964 with bobbins, nails etc. including making holes in the wall, floor etc. and cutting trenches etc. in any floor through masonry concrete, if necessary, and mending good damages with necessary jointing materials and painting two coats to the exposed surface with approved paint complete. (Measurement will be made along the center line of the total pipe line in fitted condition including specials,payment for specials & Painting will however be paid seperately).Withvalamoidjointsincludingsealingwithsandcementmortar (4:1)uptoquarterdepth 100 mm.(internal) |
| 69 | b)Supplying,fittingandfixing offollowingspecialswith valamoidjointsincludingsealingthetopwithcementmortar (4:1)i) Castironsinglebranch100 mm.dia. |
| 70 | ii) H.C.Ibendwithdoor100 mm.dia. |
| 71 | iii) H.C.Ihealrestbend100 mm.dia |
| 72 | Supplying,fittingandfixing C.I.approvedpatentventcowl confirmingtoISS 1729of1970suppliedfittedandfixedinpositioncpmpletewithloadcaulkedjointing.100 mm. dia. |
| 73 | Supplying,fittingandfixing castiron‘P’or‘S’trap conformingtoIS3989/1970and1729/1964includingleadcaulkedjointssandpaintingtwocoatstotheexposedsurface. 100 mm.‘P’trap. |
| 74 | Supplying,fittingandfixing C.P.stop / bibcock.i) Chromiumplatedbibcockshortbody. |
| 75 | ii) Chromiumplatedstopcock |
| 76 | Supplying, fitting and fixing pillar cock of approved make. a) (i) CP Pillar Cock - 15 mm. (Equivalent to Code No. 507 & Model - Tropical / Sumthing Special of ESSCO or similar brand). |
| 77 | Supplying,fittingandfixing peetsvalvefullwaygunmetalstandardpatternbestqualityofapprovedbrandwithfittings. i) 25 mm. |
| 78 | ii) 40 mm. |
| 79 | Supplying,fittingandfixing showerofapprovedbrandandmake.Chromiumplatedroundshowerwithrevolvingjoint. |
| 80 | 18 mm.thickmarblepartitionslabwithchawkdoongrimarblesquarecut,bothsidepolishedwithtwofrontcornersroundedandedgespolishedfittedandfixedcomplete. |
| 81 | Supplying,fittingandfixing 1stqualityceramictilesinwallsandfloorstomatchwiththeexistingworkand4nosofkeystones(10mm.)fixedwitharalditeatthebackofeachtile&finishingthejointswithwhitecementmixedwithcolouringoxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc . with sand cement mortar (1:4) 20 20mm thick 2 mm thick cement slurry at back side of tiles using cement @ 2.91 kg/sqm & joint filling using white cement slurry @ .20 kg/sqm area of each tile upto 0.09 sqmcoloured decorative (wall) |
| 82 | Supplying,fittingandfixing 100 mm.C.I.roundgratings(heavytype) |
| 83 | Supplying,fittingandfixing pedestalofapprovedmakeforwashbasin(white) |
| 84 | Supplying, profilesofrequiredsectionmadeofaluminumalloyextrusiveconfirmingtoI.S.733-1983andI.S.1285-1975anodisedfilmthicknessandspecificationcolour/natural)mattfinishedconfirmingI.S.1868-1983forfabricationofcompositedoor, sliding & casement windows, partitios, formed of basic sections of any ISI embossed/certified make and brand as per direction of Engineer-in -charge (payment will be made on finished length of the work).A) 15microncolourAnodizing (i) a) 2- track sliding windowi) Bottom frame Coloured. |
| 85 | ii) Top and side frame. |
| 86 | b) 3- track sliding windowi) Bottom frame |
| 87 | ii) Top and side frame. |
| 88 | c) Shutter for all track sliding window.i) Bottom & Top member. |
| 89 | c) Shutter for all track sliding window. ii) Style side member. |
| 90 | c) Shutter for all track sliding window.iii) Interlock member. |
| 91 | Supplying PVC rollers for sliding windows as per direction of Engineer in charge. |
| 92 | Supplying maruti lock (100mm) |
| 93 | Supplyingbubblefreefloatglassofapprovedmakeandbrand. Conforming to IS:2835-19875mm thick clear glass . |
| 94 | 6mm thick clear glass. |
| 95 | Supplyingconcealedtypeheavydutyhydraulicdoubleactionfloorspringalongwithtop / pinsetofpivots conforming to IS: 6315 or any approvedmake as per direction of Engineer in charge.. |
| 96 | SupplyingconcealedtypePVCheadedaluminumtowerboltfordoubleleafdoorsasperapprovedmake.300 mm long |
| 97 | Supplying ‘U’shapedEPDMgasketofapprovedmakeandbrand and brand as per direction of EIC. |
| 98 | Supplying T\" shaped EPDMgasketofapprovedmakeandbrand as per direction of EIC. |
| 99 | weather gasket / wool pile for door vertical |
| 100 | Labourchargesforfabricationandinstallationofcompositedoorwindow,partitionmadefromanodizedextendedalloyaluminumsections. For the following units:- fully glazed single leaf reamless swing door made of anodised aluminium alloy extrusions fabrication after cutting to proper shape and size, drilling and aligning fitted with heavy duty hydrolic action floor spring with top pin assembly and fitted with inbuilt locking arrangement and all other necessary fittings, fixture, adhesives and joineries, cutting the glass to requisite shape and size mounting the edges for fitting the same with dry set neoprine / EPDM gasket |
| 101 | Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - InCharge. (Payment will be made on finished length of the work) (A) In 10-12 Micron thickness Annodizing film .Movable door shutter. i) Door frame. (Top & sides) |
| 102 | ii) Shutter : Top rail. |
| 103 | iii) Shutter:Bottom rail. |
| 104 | iv) Shutter:Lock rail |
| 105 | v)Door vertical. |
| 106 | vi)Glazing cleap |
| 107 | Labour charge for fabrication and installation of composite door, window, partitions made from annodized extruded alloy aluminium sections for the following units Partly glazed partly panelled or fully glazed single leaf alunminium swing door made of extruded and annodized alloy aluminium sections, fabrication including cutting to proper shape and size, drilling and aligning, fitted with heavy duty hydraulic action floor sping placed in the floor with mending damages,with top pin assembly of approve make and brand, fitted with in built locking arrangement, flush bolt, glazing clips and all other necessary fittings, fixtures, adhesives and joineries, cutting glass of approved make to requisite shape and size fitting with dry set neoprene or EPDM gasketing, cutting to requisite shape and size panel board (prelaminated particle block) fixing them with glazing clips as per drawing, specification and direction of Engineer in charge. |
| 108 | Partly glazed and partly panelled partition or fixed glazing made of extruded and anodised alloy aluminium sections, fabrications after cutting to proper shape and size, drilling and aligning fitted with inbuilt locking arrangement cutting the glass / board (prelaminated / particle / block) to requisite shape and size moulding the edges fitted and fixed glazing clips and dry set neoprine /EPDM gasket, along with all other necessary arrangements for fixing the partition to walls, floors, beams, columns polysulphide sealant for water proofing if necessary complete in all respect as per drawing and specifications and direction of the Engineer in charge.for partition using section of size: 63.50 mmx 38.10 mm |
| 109 | Applyingexteriorgradeacrylicprimerofapprovedqualityandbrandonplasteredorconcretesurfaceoldornewsurface to receive decorative textured ( matt finish ) or smooth finish acrylic exterior emulsion paint including scraping and preparation the surface thoroughly complete as per manufacturer`s specification and as per direction of the EIC. G.Fl. |
| 110 | Protectiveanddecorativeacrylic exterior emulsion paint of approved quality as per manufacturer`s specification and as per direction of EICto be applied over acrylic primer as required. the rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer (G.Fl 2 coats)normal acrylic emulsionprimer100%acrylicexterioremulsionpaintofapprovedqualityaspermanufacturer’sspecification. i)Ingroundfloor |
| 111 | Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick). |
| 112 | Applyinginteriorgradeacrylicprimerofapprovedqualityandsurfaceoldornewsurfacetoreceivedistemper/acrylicemulsionpaintincludingscrapingandpreparingthesurfacethoroughly. Waterbasedinteriorgradeacrylicprimer. |
| 113 | Applyingacrylicemulsionpaintofapprovedmakeandbrandonwallsandceilingincludingsandpaperinginintermediatecoatsincludingputty (twocoats)Luxuryquality |
| 114 | 18 mm. to 22 mm. thick, kota stone slab set in 20 mm thick (avg) cement mortar (1:4) in floor, stair & lobby including pointing in cement slurry with admixture of pigment matching the stone shade, including grinding & polishing as per direction of Engineer - in -charge to match with the existing work. [Slurry for bedding @ 4.4 kg/Sq.m and pointing @2.0 kg/Sq.m] |
| 115 | Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches. |
| 116 | Dismantling all types of masonry excepting cement concrete plain or reinforced. Stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m.(a) In ground floor including roof. |
| 117 | Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. In groung floor including roof. (a) upto 150 mm. thick |
| 118 | Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars. (a) In ground floor including roof. |
| 119 | Cleaning compound premises of shrubs,plants,jungles etc by cutting and removing as directed(specific permission of Engineer-in-Charge prior to execution will be necessary)(payment to be made on area cleared) |
| 120 | Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. (a) For Exposed Work CPVC Pipes Class-1, SDR-111. 15 mm dia. |
| 121 | 2. 20 mm dia. |
| 122 | 3. 25 mm dia. |
| 123 | 4. 40 mm dia. |
| 124 | (b) For ConcealedWork CPVC Pipes Class-1, SDR-11 1. 15 mm dia. |
| 125 | 2. 20 mm dia. |
| 126 | 3. 25 mm dia. |
| 127 | Reducing Socket200 mm X 250 mm |
| 128 | Supplying, fitting and fixing of steel cutter piece up to 450 mm long with sockets .75 mm dia. |
| 129 | Supplying, fitting and fixing plug of approved make conforming to I.S. specifications.75mm dia |
| 130 | Supplying fitting and fixing GI cap at top1. 100 mm |
| 131 | M.S. works in brackets made from flats, angles, tees etc. to sizes specialy bent, twisted, forged; making holes drilled and fitted to rafter of trusses with necessary bolts, nuts, washer or screws etc. (length of straight not less than 230 mm) |
