|
| 1 | Clearing compound premises of shurbs , plants jungles etc. by cutting and removing as directed (Specific permission of E.I.C. prior to excution will be necessary). |
| 2 | Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75m. |
| 3 | In ground floor including roof. |
| 4 | (a) upto 150 mm. thick |
| 5 | Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75m.including stacking of steel bars. |
| 6 | Supply and delivery of approved quality cement for grouting as per direction of EIC.Basic rate Rs 5873.00/ MTAdd over head charges 5 % = Rs 293.65Total Rs 6166.65Add contractor profit 10 % = 616.67Total Rs 6783.32 |
| 7 | Filling in foundation of plinth by fine sand in layers not exceeding 150 mm. as direction and consolidating same by through saturation with water ramming complete including the cost of sand (payment to be made on measurement of finished quantity). |
| 8 | Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. |
| 9 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement, if any, in gound floor as per relevant IS codes. |
| 10 | a) Pakur Variety (Rate Analysis) |
| 11 | Ordinary cement concrete mix (3:1.5:1) grade M-20 mixwith well graded stone chips (20 mm nominal size) excluding shutting and reinforcement if any in ground floor as per relevant IS codes . |
| 12 | a) Pakur Variety (Rate Analysis) |
| 13 | Hire and labour charges for shuttering for concrete work in overhead R.C. Reservoir on separate R.C. frame including fitting, fixing and striking off after compeltion of work including staging upto 4 m using ply board or steel shuttering. (Not applicable for resting on roof top) |
| 14 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor). [Excluding cost of chipping over concrete surface.) |
| 15 | ii. (a) 10 mm. thick plaster (1:4) |
| 16 | Extra for Staging beyond 4m [mode of measurement: Area of unsupported horizontal projection .D= Outer dia of cell wall of tank, h= ht. of G.L. to bottom of Heal beamA=0.785 x D² ; V=A x h |
| 17 | Providing and inserting nipples with approved fixing compound after drilling holes for grouting as per Technical specifications including subsequent cutting/removal and sealing of the hole as necessary of nipples after completion of grouting with Cement/Epoxy. |
| 18 | Sealing of crack / porous concrete with Epoxy Grout by injection through nipples complete as per clause 2803.1. |
| 19 | Guniting concrete surface with cement mortar (25 mm nominal thick) applied with compressor after cleaning surface and spraying with epoxy complete as per Technical specification. |
| 20 | Labour for Chipping of concrete surface before taking up Plastering work. |
| 21 | Neat cement punning about 3.0 mm. thick in wall, dado, window, sills, floor, drain etc. Note:- Cement 0.304 cu.m per 100 sq. m. |
| 22 | Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of conctete surface and application of cement slurry before flooring works using cement @1.75 kg/sq.m all complete including all materials and lobour. |
| 23 | ii. 25 mm. thick |
| 24 | Applying Exterior grade Acrylic primer ofapproved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paintincluding scraping and preparing the surface thoroughly, complete as permanufacturer\"s specification and as per direction of the EIC.i).one coat Ground Floor |
| 25 | (ii) 0 to 24 mtr 31.40+{ 4x0.71+2x0.82)/2=2.24} =33.64 |
| 26 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer\"s specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.(This item to be done under specific instruction of the Superintending Engineer ) |
| 27 | In Ground floor (Two Coat) |
| 28 | Normal Acrylic Emulsion |
| 29 | (ii) 0 to 24 mtr67.00+{ 4x0.71+2x0.82)/2=2.24} =69.24 |
| 30 | (b) Priming one coat on steelor metalsurface with synthetic oil bound primer of approved quality includingsmoothening surfaces by sand papering etc.(This item is applicable to new work or old work when the original surface has been exposed by removal of old paint) |
| 31 | (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. inclding using of approved putty etc,. on the surface, if necessary : |
| 32 | (b) On steel or other metal surface:With super gloss (hi-gloss) |
| 33 | (ii) Two coat (any shade except white) |
| 34 | Disinfection and washing the tank and pipe connection including clearing the inside of the tank etc. complete as per direction of EIC. |
| 35 | Epoxy bonding of new concrete to old concrete |
| 36 | Patching of damaged concrete surface with polymer concrete (25 mm nominal thick) and curing compounds, initiator and promoter, available in present formulations, to be applied as per instructions of manufacturer and as approved by the Engineer. |
| 37 | Clearingcompoundpremisesofshurbs,plants, junglesetc. bycutting andremoving asdirected(Specific permission of Engineer-in-Charge prior to execution will be necessary). (Payment to be made on area cleared) |
| 38 | Stripping off worn out plasterand raking out joints of walls, celings etc. upto any height and in any floor including removing rubbishwithin a lead of 75m as directed. |
| 39 | Removal of rubbish, earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal /Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as perdirection of Engineer in charge. |
| 40 | Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. |
| 41 | Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. |
| 42 | Cement concrete (1:1.5:3) with graded stone chips 5.6 mm size withhexagonal square mesh wire netting, I.R.C. fabric mesh or X.P. M. fitted and fixed after tying the existing reinforcement on concrete without distributing the same and with proper scarping and cleaning the reinforcement and disturbed concrete with wire brush etc. after applying a coat of cement including the cost of wire netting I.R.C or X. P. M. & cost of all handling and scaffolding complete as per direction of Engineer-in -charge. |
| 43 | c) 37.5mm thick |
| 44 | Labour for Chipping of concrete surface before taking up Plastering work. |
| 45 | Extra rate for using Water proofing and plasticising admixture @ 0.2% by weight of cement (or at manufacturer\"s specified rate) for Mortar & concrete of various grades. (Sugested Brand Name :- SIKA/CICO ) |
| 46 | Supplying 1.5mm thick M.S. sheet fitted and fixed on one or both faces of M.S./ W.I. gate etc. with point welding at not more than 150mm apart complete in all respect as per design including cost of all labour and materials. |
| 47 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding of for chamfering corners as directed and raking out joints including throating, no sing and drip course, scaffolding / staging where necessary (Ground floor). [Excluding cost of chipping over concrete surface] (ii) With 1:4 cement mortar |
| 48 | (a) 20 mm thick plaster |
| 49 | (b) 15 mm thick plaster |
| 50 | Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc.NOTE:Cement 0.152 cu.m per100 sq.m |
| 51 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor. |
| 52 | Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc |
| 53 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(b) On steel or other metal surface :With super gloss (hi-gloss) -Two coats (with any shade except white) |
| 54 | Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer\"s specification and as per direction of the EIC. (In Ground Floor) |
| 55 | (b) Two Coats |
| 56 | i) Water based interior grade Acrylic Primer |
| 57 | Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer\"s specification) including cleaning and smoothning of surface. |
| 58 | Two coats |
| 59 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or concrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer\"s specification and as per direction of the EIC. |
| 60 | Two Coat |
| 61 | Ground floor, Two coats upto 4mtr. from G.L. |
| 62 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer\"s specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. |
| 63 | (Two Coat) |
| 64 | a) Premium 100% Acrylic emulsion upto 4mtr. |
| 65 | M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.(Add extra @ 1% for each addl. floor upto 4th floor and @ 1.25% for each addl. floor above 4th floor)Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr. |
| 66 | At Ground floor |
| 67 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement, if any, in ground floor as per relevant IS codes. |
| 68 | a) Pakur Variety. |
| 69 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. |
| 70 | (i) Pakur Variety |
| 71 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) |
| 72 | (a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge. |
| 73 | Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer. |
| 74 | (a) 500 litre capacity |
| 75 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) (a) For Exposed Work |
| 76 | PVC Pipes |
| 77 | c) 25 mm dia. |
| 78 | Supplying, fitting and fixing shower of approved brand and make. |
| 79 | (c) Chromium plated Hand shower 70mm dia Round Shape Single flow with Flexible Tube & fittings(Equivalent to Code No. ESH-5512 & Model - Tropical / Sumthing Special of ESSCO or similar). |
| 80 | Supplying, fitting, fixing UPVC pipes \"A\" type and fitting conforming to IS:13592-1992 with all necessary clamp, nails including making holes in walls, floor etc. cutting trenches in any soil through masonery concrete structures etc. if necessary and mending good damages including jointing with jointing materials (spun yarn, valamoid / bitument / M-seal etc.) complete. |
| 81 | A) UPVC pipes |
| 82 | i) 110mm dia. |
| 83 | B) UPVC fitting. |
| 84 | a) Plain Tee |
| 85 | i) 110mm dia. |
| 86 | b) Shoe |
| 87 | i) 110mm dia. |
| 88 | Supplying, fitting and fixing bib cock or stop cock.PTMT (Polytetra Bib Cock / Stop Cock ( Prayag or equivalent) 15 mm |
| 89 | Add GST 18 % ( CGST 9 % + SGST 9 %) |
| 90 | Add Cess 1 % |
