Important Work Related To Fire Safety In District Hospital Pratapgarh-2 Testing of electric driven main hydrant pump suitable for automatic operation & consisting of following complete in all required.a) Horizontal, centrifugal, end suction pump to ensure a minimum pressure of 3.5 kg/sq.cm at highest and farthest outlet at specified flow of 2280 ipm at 80 m. head conforming to IS standards.b) Casing- Cl, imperller -Bronze, Shaft-SS 410, Gland Pack.c) Squirrel cage induction motor with suitable HP with synchronous speed 2900-3000 RPM. Suitable for operation on 415 volts, 3 phase 50 Hz. AC with IP 55 protection for enclosure. Horizontal foot mounted type with Class-F insulation, Conforming to IS standards.d) Common Base plat for Pump and motor and coupling, coupling guard, rubber belows, anti-vibration arrangement, cables & other accessories as required for complete Installation of pump set. 3 Supply, Installation, Testing and Commissioning of Electric driven Main Sprinkler pump suitable for automatic operation and consisting of following complete in all respect as required.a) Horizontal, centrifugal, end suction pump to ensure a minimum pressure of 3.5 kg/sq. cm at highest and farthest outlet at specified flow of 2280 ipm at 80 m. head conforming to IS standards.b) Casing CL Imperller-Bronze, Shaft-SS 410, Gland Packc) Squirrel cage induction motor with suitable HP with synchronous speed 2900-3000 RPM Suitable for operation on 415 volts, 3 phase 50 Hz. AC with IP 55 protection for enclosure, horizontal foot mounted type with Class-F insulation, Conforming to IS standards.d) Common Base plat for Pump and motor and coupling, coupling guard, rubber belows, anti-vibration arrangement, cables & other accessories as required for complete Installation of pump set. 4 Testing of Diesel Engine driven fire pump (Standby Pump) suitable for automatic operation and consisting of following complete in all respect as required.a) Horizontal, centrifugal, end suction pump to ensure a minimum pressure of 3.5 kg/sq.cm. at highest and farthest outlet at specified flow of 2280 Ipm at 80 m. head conforming to IS standards. b) Casing Cl. Imperller-Bronze, Shaft SS 410, Gland Packc) Diesel Engine with suitable HP with synchronous speed 1800-2200 RPM, diesel tank, battery,exhaust pipe with all required accessoriesd) Common Base plat for Pump and motor and coupling, coupling guard, rubber belows, ant-vibration arrangement, cables & other accessories as required for complete Installation of pump set. 5 Testing of Electric driven pressurization pump suitable for automatic operation and consisting of following: complete in all respect as required.a) Multistage, non-self-priming, vertical high-pressure centrifugal pump with in-line design of SS 304 casing, 55 304 impeller with SS 304 shaft, mechanical seal and flow of 180 Ipm at 80 m.head conforming to IS standardsb) Squirrel cage induction motor with suitable HP with synchronous speed 2950 RPM, Suitable for operation on 415 volts, 3 phase 50 Hz. AC with IP 55 protection for enclosure, Class-F insulation, Conforming to IS standards.c) Common Base plat for Pump and motor and coupling, coupling guard, rubber belows, anti vibration pads, cables and other accessories as required for complete installation of pump set. 6 Supplying, Installation, Testing and Commissioning of Control Panel suitable for automatic operation of fire fighting pumps consisting (2 no. of Main, 1no of Standby pump & 2 no. jockey pump)(a) Necessary FS cabling, cable tray, wiring, earthing from panel to individual equipment/pump in pump room shall be included in the quoted price(b) Facility for more selections l.e. auto or manual(c) Protection failure and control cabling(d) interlocking of pressure switch with pumps(e) Compatible for IBMSMajor component of panel are as underIncomer 2no of 400A TPN MCCB with interlocking RYB indication lamp - 2setDigital Amtr and voltmerer-2set Window announciator with hooter, 400A TPN Aluminium busbar Outgoing2004 TP MCCB-2 nos.with soft starter and push buttons and with all required accessories32A TR MCB-5 nos.with soft starter and push buttons and with all required accessories & suitable arrangement for Diesel engine.Complete in all respect as required. 7 Testing of 150 mm dia Pressure Gauge UL Listed (for all pipes) of range 0-21 Kg/cm³ Polished Stainless Steel Case with positive seal against weather, moisture & dust, with Glycerine filled, screwed, nipple, isolation valve, U-type stainless steel siphon tube and complete with necessary as required. 8 Testing of Pressure Switches for automation of fire pumps. Pressure switches shall be SPDT type suitable for single phase supply with diaphragm, IP 66 protection as required. 9 Testing of the following sizes of flange jointed/screwed/welded, Above Ground M.S. Pipes of (Heavy class) including accessories such as MS bracket, U clamps with Anchor fasteners, tees/ elbows/ reducers/ couplings/ unions/ bends/flanges etc., 10 Testing and Commissioning of the following sizes of flange jointed/screwed/welded, Underground M.S. Pipes of Class C (Heavy class) ISI marked including accessories such as MS bracket, U clamps with Anchor fasteners, tees/ elbows/ reducers/ couplings/ unions/ bends/ flanges/ wrapping coating 4mm thick /150mm width as per IS:10221 etc. 11 a) 150mm dia. 12 Testing of C.I. Y typeStrainer (PN 16) with SS Screen/SS 304 having 1.2mm perforation with require accessories. 13 a) 200 mm Dia. 14 Testing of C.I. Butterfly valve (IS:13095, PN 16) with flanges, nut bolts, gaskets complete as required. 15 Testing of Cast ironDual plate Check valve (PN 16). 16 Testing of Air vessel of size 450 x 2000 mm long fabricated from 8 mm thick M.S Plate and installed vertically on suitable legs. legs shall be provided with M.S. plate of size 50mmx50mmx6mm at bottom with necessary accessories, as required for complete installation. 17 Testing Single Headed Fire Hydrant Valve with 80 mm N.B flanged inlet, 63 mm dia female instantaneous outlet type SS coupling, blank cap, chain, twist release type lug & all accessories Conforming to IS:5290. Including fixing with supports, flanged tapping from wet riser, orifice plate complete as required by the Local Fire Authority. Contractor shall provide orifice plate size & calculation 18 Supply, Installation, Testing and Commissioning of Fire Hose Cabinet wall mounting type 18swg (750 mm x 600 mm x 250 mm deep) having single or double opening with necessary locking arrangement by allan key suitable for housing 2 nos hose pipe, 1no. Branch pipe & nozzle spanner 19 Supply, installation, testing and commissioning non- percolating rubber reinforced lined Fire Hose pipe (as per IS: 636) of 63 mm dia and 1x15 mtrs long. The hose shall be rated for burst pressure of 35.7 Kg/sqcm. Hose shall be complete with ISI marked SS male & female coupling (IS: 903) hound & riveted to hose pipe with ss rivets & 1.5 mm ss wire as required by the local fire authority. 20 Supply, installation, Testing and commissioning of 63 mm dia instantaneous pattern SS short branch pipe. 20 mm dia nozzle conforming to IS 903, suitable for inter connection to hose pipe coupling complete as required by the Local Fire Authority. 21 testing of First Aid Hose Reel equipment conforming to IS:884 comprising of hose reel drum, 8 mm shut off nozzle, Rubber/PVC hose reel tubing as per IS: 444 of 25 mm dia x 36 mtr. long. painting, fixed wall type with fixing bracket, anchor fastener, bolts & nuts etc. complete as required by Local Fire Authority 22 testing of Cast Iron Fire Brigade Inlet as per IS: 904 having 63 mm dia inlet with blank cap and chain with necessary fittings, flanges, nut bolts etc. complete as required. 23 Testing of forged brass Ball Valves (PN 25) with all fittings requireda) 25mm dia. 24 refilling of Carbon Dioxide (Co2) type Fire Extinguisher of 4.5 kg confirm to IS:15683, stored pressure, wheel type with ISI marked fitted with required accessories including wall suspension brackets. 25 refilling of ABC (MAP 90%) type 6 kg stored pressure, squeeze type confirm to IS:15683, with ISI marked fitted with required accessories including wall suspension brackets. 26 Testing of following details: 27 h) Smoke Detectors 28 i) Hooters. 29 j) Manual Call Point. 30 Supply, Installation, Testing & Commissioning foundation, foundation can be built by excavating hard or soft soil providing and laying cement concrete AND Providing water proofing on tank wall. Also Installation new MS stairs (monkey ladder)
